Jump to content

  2. → Viewing Profile: Posts: hanomag

hanomag

Member Since 4 May 2011
Offline Last Active 18 Sep 2015 19:56
-----

Posts I've Made

In Topic: Standaard installatie OSCAM werkt niet, canal digitaal op zwart bij ET7000

17 September 2015 - 18:58

Als ik de kans krijg probeer ik het komend weekend. Zoals het wordt gesteld lijkt het een klokinstelling van de leestijd.


In Topic: Standaard installatie OSCAM werkt niet, canal digitaal op zwart bij ET7000

15 September 2015 - 20:56

Zie hieronder  mijn log bij de standaard installatie van OSCAM bij de ET7000.

De foutmeldingen zijn aanwezig Zie hieronder vet.

Is de standaard setup niet OK ???

Hoe nu verder op te pakken?

 

 

2015/09/11 12:50:10 00000000 s (main) System name = Linux
2015/09/11 12:50:10 00000000 s (main) Host name = et7x00
2015/09/11 12:50:10 00000000 s (main) Release = 3.14.21
2015/09/11 12:50:10 00000000 s (main) Version = #1 SMP Mon Feb 16 04:38:08 CET 2015
2015/09/11 12:50:10 00000000 s (main) Machine = mips
2015/09/11 12:50:10 00000000 s (main) Stb model = dm800se
2015/09/11 12:50:10 00000000 s (main) Stb boxtype = et7000
2015/09/11 12:50:10 00000000 s (main) creating pidfile /tmp/oscam.pid with pid 2046
2015/09/11 12:50:10 00000000 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2015/09/11 12:50:10 00000000 s (main) signal handling initialized
2015/09/11 12:50:10 00000000 s (config) 10 provid's loaded
2015/09/11 12:50:10 00000000 s (config) 164 service-id's loaded in 2 ms
2015/09/11 12:50:10 00000000 s (reader) lower_card [internal] creating thread for device /dev/sci0
2015/09/11 12:50:10 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
2015/09/11 12:50:10 00000000 s (main) waiting for local card init
2015/09/11 12:50:10 17112809 r (reader) lower_card [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=4.50 MHz)
2015/09/11 12:50:10 17112809 r (reader) lower_card [internal] Reader sci internal, detected box type: et7000
2015/09/11 12:50:10 77BC15FD h (webif) webif: decompressed 163919 bytes back into 392304 bytes
2015/09/11 12:50:10 77BC15FD h (webif) HTTP Server running. ip=0.0.0.0 port=8081
2015/09/11 12:50:11 17112809 r (reader) lower_card [internal] card detected
2015/09/11 12:50:12 17112809 r (reader) lower_card [internal] ATR: 3B F7 11 00 01 40 96 70 70 0A 0E 6C B6 D6
2015/09/11 12:50:12 17112809 r (reader) lower_card [internal] Init card protocol T0, FI=1, F=372, D=1, N=1
2015/09/11 12:50:12 17112809 r (reader) lower_card [internal] Calculated work ETU is 82.67 us reader mhz = 450
2015/09/11 12:50:13 17112809 r (reader) lower_card [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->mhz)
2015/09/11 12:50:14 17112809 r (reader) lower_card [internal] detect seca/nagra tunneled card
2015/09/11 12:50:28 17112809 r (reader) lower_card [internal] card system not supported
2015/09/11 12:50:28 17112809 r (reader) lower_card [internal] Normal mode failed, reverting to Deprecated Mode
2015/09/11 12:50:29 17112809 r (reader) lower_card [internal] ATR: 3B F7 11 00 01 40 96 70 70 0A 0E 6C B6 D6
2015/09/11 12:50:29 17112809 r (reader) lower_card [internal] Init card protocol T0, FI=1, F=372, D=1, N=1
2015/09/11 12:50:29 17112809 r (reader) lower_card [internal] Calculated work ETU is 82.67 us reader mhz = 450
2015/09/11 12:50:29 17112809 r (reader) lower_card [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->mhz)
2015/09/11 12:50:30 17112809 r (reader) lower_card [internal] detect seca/nagra tunneled card
2015/09/11 12:50:44 17112809 r (reader) lower_card [internal] card system not supported
2015/09/11 12:50:44 17112809 r (reader) lower_card [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2015/09/11 12:50:44 17112809 r (reader) lower_card [internal] card initializing error
2015/09/11 12:50:45 00000000 s (main) init for all local cards done
2015/09/11 12:50:45 00000000 s (emmcache) loaded 0 emmcache records from /tmp/.oscam/oscam.emmcache in 1 ms
2015/09/11 12:50:45 00000000 s (emmcache) loaded 0 emmstat records from /tmp/.oscam/oscam.emmstat in 0 ms
2015/09/11 12:50:45 00000000 s (anticasc) anti cascading disabled
2015/09/11 12:50:45 24963C53 c (client) plain dvbapi-client granted (dvbapiau, au=auto (2 reader))
2015/09/11 12:50:45 24963C53 c (dvbapi) dvbapi channelcache loaded from /etc/tuxbox/config/oscam/oscam.ccache
2015/09/11 12:50:45 24963C53 c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1
2015/09/11 12:50:45 24963C53 c (dvbapi) PMT6: Trying connect to enigma CA PMT listen socket...
2015/09/11 12:50:45 24963C53 c (dvbapi) PMT6 CA PMT Server connected on fd 8!
2015/09/11 12:50:45 24963C53 c (dvbapi) Demuxer 0 ecmpid 0 CAID: 1817 ECM_PID: 0717 PROVID: 00006A
2015/09/11 12:50:45 24963C53 c (dvbapi) Demuxer 0 ecmpid 1 CAID: 0100 ECM_PID: 0717 PROVID: 00006A
2015/09/11 12:50:45 24963C53 c (dvbapi) Demuxer 0 ecmpid 2 CAID: 0500 ECM_PID: 0C76 PROVID: 051900
2015/09/11 12:50:45 24963C53 c (dvbapi) Demuxer 0 skipped stream CAID: 0100 ECM_PID: 0717 PROVID: 00006A (Same as ECMPID 1)
2015/09/11 12:50:45 24963C53 c (dvbapi) Demuxer 0 skipped stream CAID: 0500 ECM_PID: 0C76 PROVID: 051900 (Same as ECMPID 2)
2015/09/11 12:50:45 24963C53 c (dvbapi) Demuxer 0 found 3 ECMpids and 4 STREAMpids in PMT
2015/09/11 12:50:45 24963C53 c (dvbapi) Demuxer 0 serving srvid 17CA (1817@00006A:17CA unknown) on adapter 0000 camask 0001 index 0000 pmtpid 09BA
2015/09/11 12:50:45 24963C53 c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
2015/09/11 12:50:49 24963C53 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2015/09/11 12:51:59 24963C53 c (-) -- Skipped 13 duplicated log lines --
2015/09/11 12:52:59 24963C53 c (-) -- Skipped 12 duplicated log lines --
2015/09/11 12:53:59 24963C53 c (-) -- Skipped 12 duplicated log lines --
2015/09/11 12:54:59 24963C53 c (-) -- Skipped 12 duplicated log lines --
2015/09/11 12:56:00 24963C53 c (-) -- Skipped 12 duplicated log lines --

 

 

PS: Ik zie wel op streamboard dat de card reader van de ET7000 nog niet op de lijst staat. Mogelijk toch een driver probleem?


In Topic: Standaard installatie OSCAM werkt niet, canal digitaal op zwart bij ET7000

15 September 2015 - 20:32

Zie hieronder  mijn log bij de standaard installatie van OSCAM bij de ET7000.

De foutmeldingen zijn aanwezig Zie hieronder vet.

Is de standaard setup niet OK ???

Hoe nu verder op te pakken?

 

 

2015/09/11 12:50:10 00000000 s (main) System name = Linux
2015/09/11 12:50:10 00000000 s (main) Host name = et7x00
2015/09/11 12:50:10 00000000 s (main) Release = 3.14.21
2015/09/11 12:50:10 00000000 s (main) Version = #1 SMP Mon Feb 16 04:38:08 CET 2015
2015/09/11 12:50:10 00000000 s (main) Machine = mips
2015/09/11 12:50:10 00000000 s (main) Stb model = dm800se
2015/09/11 12:50:10 00000000 s (main) Stb boxtype = et7000
2015/09/11 12:50:10 00000000 s (main) creating pidfile /tmp/oscam.pid with pid 2046
2015/09/11 12:50:10 00000000 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2015/09/11 12:50:10 00000000 s (main) signal handling initialized
2015/09/11 12:50:10 00000000 s (config) 10 provid's loaded
2015/09/11 12:50:10 00000000 s (config) 164 service-id's loaded in 2 ms
2015/09/11 12:50:10 00000000 s (reader) lower_card [internal] creating thread for device /dev/sci0
2015/09/11 12:50:10 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
2015/09/11 12:50:10 00000000 s (main) waiting for local card init
2015/09/11 12:50:10 17112809 r (reader) lower_card [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=4.50 MHz)
2015/09/11 12:50:10 17112809 r (reader) lower_card [internal] Reader sci internal, detected box type: et7000
2015/09/11 12:50:10 77BC15FD h (webif) webif: decompressed 163919 bytes back into 392304 bytes
2015/09/11 12:50:10 77BC15FD h (webif) HTTP Server running. ip=0.0.0.0 port=8081
2015/09/11 12:50:11 17112809 r (reader) lower_card [internal] card detected
2015/09/11 12:50:12 17112809 r (reader) lower_card [internal] ATR: 3B F7 11 00 01 40 96 70 70 0A 0E 6C B6 D6
2015/09/11 12:50:12 17112809 r (reader) lower_card [internal] Init card protocol T0, FI=1, F=372, D=1, N=1
2015/09/11 12:50:12 17112809 r (reader) lower_card [internal] Calculated work ETU is 82.67 us reader mhz = 450
2015/09/11 12:50:13 17112809 r (reader) lower_card [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->mhz)
2015/09/11 12:50:14 17112809 r (reader) lower_card [internal] detect seca/nagra tunneled card
2015/09/11 12:50:28 17112809 r (reader) lower_card [internal] card system not supported
2015/09/11 12:50:28 17112809 r (reader) lower_card [internal] Normal mode failed, reverting to Deprecated Mode
2015/09/11 12:50:29 17112809 r (reader) lower_card [internal] ATR: 3B F7 11 00 01 40 96 70 70 0A 0E 6C B6 D6
2015/09/11 12:50:29 17112809 r (reader) lower_card [internal] Init card protocol T0, FI=1, F=372, D=1, N=1
2015/09/11 12:50:29 17112809 r (reader) lower_card [internal] Calculated work ETU is 82.67 us reader mhz = 450
2015/09/11 12:50:29 17112809 r (reader) lower_card [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->mhz)
2015/09/11 12:50:30 17112809 r (reader) lower_card [internal] detect seca/nagra tunneled card
2015/09/11 12:50:44 17112809 r (reader) lower_card [internal] card system not supported
2015/09/11 12:50:44 17112809 r (reader) lower_card [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2015/09/11 12:50:44 17112809 r (reader) lower_card [internal] card initializing error
2015/09/11 12:50:45 00000000 s (main) init for all local cards done
2015/09/11 12:50:45 00000000 s (emmcache) loaded 0 emmcache records from /tmp/.oscam/oscam.emmcache in 1 ms
2015/09/11 12:50:45 00000000 s (emmcache) loaded 0 emmstat records from /tmp/.oscam/oscam.emmstat in 0 ms
2015/09/11 12:50:45 00000000 s (anticasc) anti cascading disabled
2015/09/11 12:50:45 24963C53 c (client) plain dvbapi-client granted (dvbapiau, au=auto (2 reader))
2015/09/11 12:50:45 24963C53 c (dvbapi) dvbapi channelcache loaded from /etc/tuxbox/config/oscam/oscam.ccache
2015/09/11 12:50:45 24963C53 c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1
2015/09/11 12:50:45 24963C53 c (dvbapi) PMT6: Trying connect to enigma CA PMT listen socket...
2015/09/11 12:50:45 24963C53 c (dvbapi) PMT6 CA PMT Server connected on fd 8!
2015/09/11 12:50:45 24963C53 c (dvbapi) Demuxer 0 ecmpid 0 CAID: 1817 ECM_PID: 0717 PROVID: 00006A
2015/09/11 12:50:45 24963C53 c (dvbapi) Demuxer 0 ecmpid 1 CAID: 0100 ECM_PID: 0717 PROVID: 00006A
2015/09/11 12:50:45 24963C53 c (dvbapi) Demuxer 0 ecmpid 2 CAID: 0500 ECM_PID: 0C76 PROVID: 051900
2015/09/11 12:50:45 24963C53 c (dvbapi) Demuxer 0 skipped stream CAID: 0100 ECM_PID: 0717 PROVID: 00006A (Same as ECMPID 1)
2015/09/11 12:50:45 24963C53 c (dvbapi) Demuxer 0 skipped stream CAID: 0500 ECM_PID: 0C76 PROVID: 051900 (Same as ECMPID 2)
2015/09/11 12:50:45 24963C53 c (dvbapi) Demuxer 0 found 3 ECMpids and 4 STREAMpids in PMT
2015/09/11 12:50:45 24963C53 c (dvbapi) Demuxer 0 serving srvid 17CA (1817@00006A:17CA unknown) on adapter 0000 camask 0001 index 0000 pmtpid 09BA
2015/09/11 12:50:45 24963C53 c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
2015/09/11 12:50:49 24963C53 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2015/09/11 12:51:59 24963C53 c (-) -- Skipped 13 duplicated log lines --
2015/09/11 12:52:59 24963C53 c (-) -- Skipped 12 duplicated log lines --
2015/09/11 12:53:59 24963C53 c (-) -- Skipped 12 duplicated log lines --
2015/09/11 12:54:59 24963C53 c (-) -- Skipped 12 duplicated log lines --
2015/09/11 12:56:00 24963C53 c (-) -- Skipped 12 duplicated log lines --


In Topic: Installeren OSCam, special van De Transponder

10 September 2015 - 10:09

 

Mooie starter.

Jammer dat men kiest om cccam protocol te gebruiken voor interne share.

Oscam intern sharen gaat perfect met cs378x (camd 3.5 TCP: yes) of cs357x (UDP). Bij OSCam zelfbouw (met bvb. Simplebuild) kan je deze lichter maken. En dan deze modules eruit laten:

camd 3.3x:                               no
camd 3.5 UDP:                            no
newcamd:                                 no
CCcam:                                   no
CCcam share:                             no
gbox:                                    no
radegast:                                no
scam:                                    no

Wat is dan de setup voor gebruik van OSCAM. Wat moet ik dan instellen. Op mijn et5000 werkt OSCAM. Op de et7000 die ik als server wil gebruiken krijg ik geen beeld met activeren van OSCAM. Kan ik ook niet sharen.


In Topic: Installeren OSCam, special van De Transponder

9 September 2015 - 21:12

Een nieuwe special van satclub De Transponder: het installeren van OSCam.

Super bedankt. Als ik het goed begrijp kan ik beter een reeds geinstallateerde OSCAM (die functioneert nu bij mijn et7000 niet) eerst verwijderen?

CCcam werkt nu bij mij op de ET 7000 als cam. Die moet ik dus laten staan maar OSCAM als cam activeren?

Zijn dat dan alle instelleingen die ik moet doen?


  1. Forums
  2. → Viewing Profile: Posts: hanomag