volk2003

Thank You, Pippin, I will.

By the way,

openvpn client with my config is working very good on VTi.

I will not argue about why private networks are needed. Open VLN is one of the components of the enigma2. I use to manage telnet and ftp boxes of my clients, even if they do not have a real ip address. sharing can be managed without openvpn. Sorry, if I ask for help on the wrong address. With best wishes.

Hello, WanWizard,

I'm sorry that You found here some unlegal.

I cannot understand, what is illegal here?

I just wanted update to openPLi6. and I'm not a specialist in networking.

Yes, this config is active, and this server has about 50 clients, based on openPLi 4 (about 1 year old) and VTI (dated may-june 2016) and I have a client on android.

All clients have those client config.

If I try to update openPLi 4.0, or install openPLi 6.0, client doesn't work

Hello, thanks for help

about server

server is on router

Netgear n300, mode WNR3500L v.2
Tomato Firmware 1.28.0000 MIPSR2-102 K26 USB AIO
Tomato VPN vpn3.6 release

Basic configuration:
 

Start with WAN Yes
Interface Type TUN
Protocol UDP
Port 1194
Firewall Automatic
Autorization Mode TLS
Extra HMAC autorization Disabled
VPN subnet/mask 10.0.0.0 255.255.240.0

 

Advanced configuration:

Poll Interval 0
Push LAN to clients Yes
Direct clients to
redirect Internet traffic No
Respond to DNS No
Encryption cipher DES-CBC
Compression Adaptive
TLS Renegotiation Time     -1(in seconds, -1 for default)
Manage Client-Specific Options No

 

 

Custom Configuration:

client-config-dir /opt/openvpn/ccd
verb 2
mute 20
keepalive 10 120
client-to-client
comp-lzo
persist-key
persist-tun

 

and four keys:
Certificate Authority    (key)
Server Certificate        (key)
Server Key                  (key)
Diffie Hellman parameters (key)