DrAk3

Hi all,

today i made a fresh install of my et9x00 with the last nightly build.

 

After the manual install of kernel module gor the A867 dvb-t key (kernel module 9035 and the dependences) the decoder stalled during the reboot.

This is the log:

 

usb 1-1.2: dvb_usb_v2: found a 'AVerMedia HD Volar (A867)' in warm state
usbcore: registered new interface driver dvb_usb_af9035
usb 1-1.4: dvb_usb_v2: found a 'AVerMedia HD Volar (A867)' in warm state
usb 1-1.2: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
DVB: registering new adapter (AVerMedia HD Volar (A867))
usb 1-1.4: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
DVB: registering new adapter (AVerMedia HD Volar (A867))
i2c i2c-4: af9033: firmware version: LINK=12.13.15.0 OFDM=6.20.15.0
usb 1-1.2: DVB: registering adapter 1 frontend 0 (Afatech AF9033 (DVB-T))...
i2c i2c-5: af9033: firmware version: LINK=12.13.15.0 OFDM=6.20.15.0
usb 1-1.4: DVB: registering adapter 2 frontend 0 (Afatech AF9033 (DVB-T))...
mxl5007t 4-0060: creating new instance
mxl5007t 5-0060: creating new instance
Console: switching to colour dummy device 80x25
Registered IR keymap rc-empty
Registered IR keymap rc-empty
input: AVerMedia HD Volar (A867) as /devices/platform/ehci-brcm.0/usb1/1-1/1-1.2/rc/rc0/input3
input: AVerMedia HD Volar (A867) as /devices/platform/ehci-brcm.0/usb1/1-1/1-1.4/rc/rc1/input4
rc0: AVerMedia HD Volar (A867) as /devices/platform/ehci-brcm.0/usb1/1-1/1-1.2/rc/rc0
usb 1-1.2: dvb_usb_v2: schedule remote query interval to 500 msecs
usb 1-1.2: dvb_usb_v2: 'AVerMedia HD Volar (A867)' successfully initialized and connected
rc1: AVerMedia HD Volar (A867) as /devices/platform/ehci-brcm.0/usb1/1-1/1-1.4/rc/rc1
usb 1-1.4: dvb_usb_v2: schedule remote query interval to 500 msecs
usb 1-1.4: dvb_usb_v2: 'AVerMedia HD Volar (A867)' successfully initialized and connected
platform dvb0.0: DVB: registering adapter 0 frontend 2 (vtuner)...
platform dvb0.0: DVB: registering adapter 0 frontend 3 (vtuner)...

Hi all, I'm looking for a plugin that enable ac3/dts downmix only on a specific channel. Anybody can help me? Ragards D.

Hi all,
i bought another a867 usb tuner because i need 2 dtt tuner into my et9x00, but i can't use them together.. with the first the signal is ok but the screen is always black. if i put the priority to the second i can see the program but can't use the second (same problem... black screen).

this is the dmesg:


AVerMedia A867 driver module V1.0.27 loaded.
dvb-usb: found a 'AVerMedia A867 DVB-T Recevier' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
DVB: registering new adapter (AVerMedia A867 DVB-T Recevier)
DVB: registering adapter 1 frontend 0 (A867 USB DVB-T)...
dvb-usb: AVerMedia A867 DVB-T Recevier successfully initialized and connected.
dvb-usb: found a 'AVerMedia A867 DVB-T Recevier' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
DVB: registering new adapter (AVerMedia A867 DVB-T Recevier)
DVB: registering adapter 2 frontend 0 (A867 USB DVB-T)...
dvb-usb: AVerMedia A867 DVB-T Recevier successfully initialized and connected.
usbcore: registered new interface driver dvb-usb-a867
Console: switching to colour dummy device 80x25
DVB: registering adapter 0 frontend 2 (vtuner)...
DVB: registering adapter 0 frontend 3 (vtuner)...

and this is the lsmod:

Module Size Used by
dvb_usb_a867 210137 3
dvb_usb 18026 1 dvb_usb_a867
ipv6 351430 12
dvb 5022440 32
modloader2 32629 1 dvb
modloader 22281 0
tpm 6509 3 dvb,modloader2,modloader


i think that kernel use always the second vtuner because it use the same module. Can i bypass this problem?

regards

D.

hi,
i'm looking for an e2 plugin to use with my ipad, is supported by openpli image? can someone help me?

regards

D.

Hi all,
with the new kernel module (2-3 weeks ago) my a867 usv key doesn't works fine.
I used both driver tha support it (9035 or a867).
With the kernel-module-dvb-usb-af9035 i can't use th key because i receive this errors during the channel zapping:


mxl5007t 4-0060: creating new instance
mxl5007t_get_chip_id: unknown rev (3f)
mxl5007t_get_chip_id: MxL5007T detected @ 4-0060
dvb-usb: AVerMedia HD Volar (A867) successfully initialized and connected.
usbcore: registered new interface driver dvb_usb_af9035
Console: switching to colour dummy device 80x25
mxl5007t_write_reg: 473: failed!
mxl5007t_init: error -140 on line 696
DVB: registering adapter 0 frontend 2 (vtuner)...
mxl5007t_write_reg: 473: failed!
mxl5007t_sleep: error -140 on line 714
mxl5007t_write_reg: 473: failed!
mxl5007t_sleep: error -140 on line 716
mxl5007t_write_reg: 473: failed!
mxl5007t_init: error -140 on line 696
mxl5007t_write_reg: 473: failed!
mxl5007t_sleep: error -140 on line 714
mxl5007t_write_reg: 473: failed!
mxl5007t_sleep: error -140 on line 716


with the kernel-module-dvb-usb-a867 the key works but the cpu load of the et9x00 is very very high and sound sometimes goes away...

is this only a problem of mine? why i can't use the 9035 module?

regards

D.