Still doesn't seem to work:(
Maybe this helps to make things clearer:
root@et5x00:~# /etc/init.d/networking restart
Reconfiguring network interfaces... Initializing interface 'wlan0' conf '/etc/wpa_supplicant.wlan0.conf' driver 'wext' ctrl_interface 'N/A' bridge 'N/A'
Configuration file '/etc/wpa_supplicant.wlan0.conf' -> '/etc/wpa_supplicant.wlan0.conf'
Reading configuration file '/etc/wpa_supplicant.wlan0.conf'
ctrl_interface='/var/run/wpa_supplicant'
eapol_version=1
fast_reauth=1
ap_scan=1
Line: 6 - start of a new network block
ssid - hexdump_ascii(len=15):
48 61 6d 62 75 72 67 20 4e 65 74 77 6f 72 6b Hamburg Network
scan_ssid=0 (0x0)
key_mgmt: 0x2
proto: 0x3
pairwise: 0x18
group: 0x18
PSK (ASCII passphrase) - hexdump_ascii(len=8): [REMOVED]
PSK (from passphrase) - hexdump(len=32): [REMOVED]
Priority group 0
id=0 ssid='Hamburg Network'
SIOCGIWRANGE: WE(compiled)=22 WE(source)=16 enc_capa=0xf
capabilities: key_mgmt 0xf enc 0xf flags 0x0
netlink: Operstate: linkmode=1, operstate=5
Own MAC address: 00:26:5a:eb:de:1f
wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_countermeasures
RSN: flushing PMKID list in the driver
Setting scan request: 0 sec 100000 usec
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: Supplicant port status: Unauthorized
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
EAPOL: Supplicant port status: Unauthorized
EAPOL: Supplicant port status: Unauthorized
Added interface wlan0
Daemonize..
daemon: No such device
Removing interface wlan0
No keys have been configured - skip key clearing
State: DISCONNECTED -> DISCONNECTED
wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
netlink: Operstate: linkmode=-1, operstate=5
EAPOL: External notification - portEnabled=0
EAPOL: Supplicant port status: Unauthorized
EAPOL: External notification - portValid=0
EAPOL: Supplicant port status: Unauthorized
wpa_driver_wext_set_countermeasures
No keys have been configured - skip key clearing
Cancelling scan request
Cancelling authentication timeout
netlink: Operstate: linkmode=0, operstate=6
udhcpc (v1.18.5) started
Sending discover...
Sending discover...
Sending discover...
No lease, forking to background
done.
root@et5x00:~#
Thank you in advance!
inte
Member Since 9 Nov 2011Offline Last Active 09 Nov 2011 15:50