Hi Ambrosa,
Great work with the driver, my stick worked right away with VDR - except for the IR. Tried different protocols (Nec, rc5...) debug=4 etc, but I just cannot seem to get anything out from the IR. The actual device (detail below) is looking quite like http://linuxtv.org/w...ii-rev3-003.jpg and the remote is exactly like it.
But nothing from the remote.....
Any further debugging aid? Keymaps?
Also the IR seems to initiate OK:
[ 4683.240060] usb 1-4: new high speed USB device number 4 using ehci_hcd
[ 4683.392170] dvb-usb: found a 'DK DONGLE' in warm state.
[ 4683.392187] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 4683.393895] DVB: registering new adapter (DK DONGLE)
[ 4683.410213] RTL2832U usb_init_bulk_setting : USB2.0 HIGH SPEED (480Mb/s)
[ 4683.538759] RTL2832U check_tuner_type : FC2580 tuner on board...
[ 4684.154597] DVB: registering adapter 0 frontend 0 (Realtek DVB-T RTL2832)...
[ 4684.155012] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.7/usb1/1-4/input/input16
[ 4684.155134] dvb-usb: schedule remote query interval to 287 msecs.
[ 4684.155145] dvb-usb: DK DONGLE successfully initialized and connected.
Bus 001 Device 004: ID 1d19:1101 Dexatek Technology Ltd. DK DVB-T Dongle
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x1d19 Dexatek Technology Ltd.
idProduct 0x1101 DK DVB-T Dongle
bcdDevice 1.00
iManufacturer 1 Realtek
iProduct 2 Rtl2832UDVB
iSerial 3 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 34
bNumInterfaces 2
bConfigurationValue 1
iConfiguration 4 USB2.0-Bulk&Iso
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 5 Bulk-In, Interface
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 0
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 5 Bulk-In, Interface
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 2
Device Status: 0x0000
(Bus Powered)
hlu
Member Since 23 Dec 2011Offline Last Active 27 Dec 2011 18:07