casacristo

cccam under /var/bin and simply edit your enigma2.sh script to add a line such as /var/bin/cccam before the enigma2 line.
you will also need to modprobe the dvbsofwareca module (so have another line before /var/bin/CCcam that reads:
modprobe dvbsoftwareca
if that fails then insmod /path_to_dvbsoftwareca/dvbsoftwareca.ko

How can I add cccam or oscam softcams in openpli enigma2pc? and where can i add these files? thanks all reply

The problem is that this is a new pc and the master branch never compiled right.
the error logs you see are with a bran new installation of enigma2, no config or settings modified.
Note that it detects 1920x1080 although I have not specified it in the settings file.
Also the skin is the default one as I never get a chance to change anything.

Perhaps if I could start it with the PLi-HD skin I would by-pass the green screen

Can somebody point out the file and line to modify to achieve this?

Do you have the same problems when you are using master branch?
It seems that you are not using default skin. Please try with default skin.

The problem is that I don't know which operation is not permitted: "FATAL: failed: Operation not permitted"

I think that you're using the new parameters in the settings file (config.pc.initial_window_width and ... height). Please comment them out or delete them.

Regards,
Betacentauri

and this is the log trying to launch it with xshm (same green screen crash on start up)

cd /usr/local/e2/bin/
sudo /usr/local/e2/bin/enigma2 > /tmp/enigma2_log.txt 2>&1

cat /tmp/enigma2_log.txt
/dev/fb0: No such file or directory
PYTHONPATH: /usr/local/e2/lib/enigma2/python
Display resolution 1920 1080
XINE-LIB version: 1.2.1openpliPC-e2
configfile  /usr/local/e2/share/enigma2/xine.conf
use vo_driver: xshm
use ao_driver: auto


WARNING: current display depth is 24. For better performance
a depth of 16 bpp is recommended!

X11OSD: MMX OSD scaling active
audio_alsa_out : supported modes are 8bit 16bit 24bit 32bit mono stereo (4-channel not enabled in xine config) (4.1-channel not enabled in xine config) (5-channel not enabled in xine config) (5.1-channel not enabled in xine config) (a/52 and DTS pass-through not enabled in xine config)
input_bluray: (bluray_class_get_instance:1446) bluray_class_get_instance
input_bluray: (bluray_class_get_instance:1446) bluray_class_get_instance
xine: found input plugin  : file input plugin
ebml: invalid EBML ID size (0x0) at position 1
ebml: Invalid EBML length size (0x0) at position 2
ebml: invalid master element
demux_dts: unsupported DTS stream type, or not a DTS stream
xine: found demuxer plugin: Elementary MPEG stream demux plugin
setResolution 720 576
XNextEvent 19
XNextEvent 12
adapter0/demux0: reset stateXNextEvent 99
XNextEvent 14
XNextEvent 99
Event Received!
executing main
Event Received!
XNextEvent 14
XNextEvent 99
setResolution 1280 720
FATAL:  failed: Operation not permitted
[root@atom e2]# vim share/enigma2/xine.conf
[root@atom e2]# cat /tmp/enigma2_log.txt
/dev/fb0: No such file or directory
PYTHONPATH: /usr/local/e2/lib/enigma2/python
Display resolution 1920 1080
XINE-LIB version: 1.2.1openpliPC-e2
configfile  /usr/local/e2/share/enigma2/xine.conf
use vo_driver: xshm
use ao_driver: auto


WARNING: current display depth is 24. For better performance
a depth of 16 bpp is recommended!

X11OSD: MMX OSD scaling active
audio_alsa_out : supported modes are 8bit 16bit 24bit 32bit mono stereo (4-channel not enabled in xine config) (4.1-channel not enabled in xine config) (5-channel not enabled in xine config) (5.1-channel not enabled in xine config) (a/52 and DTS pass-through not enabled in xine config)
input_bluray: (bluray_class_get_instance:1446) bluray_class_get_instance
input_bluray: (bluray_class_get_instance:1446) bluray_class_get_instance
xine: found input plugin  : file input plugin
ebml: invalid EBML ID size (0x0) at position 1
ebml: Invalid EBML length size (0x0) at position 2
ebml: invalid master element
demux_dts: unsupported DTS stream type, or not a DTS stream
xine: found demuxer plugin: Elementary MPEG stream demux plugin
setResolution 720 576
XNextEvent 19
XNextEvent 12
adapter0/demux0: reset stateXNextEvent 99
XNextEvent 14
XNextEvent 99
Event Received!
executing main
Event Received!
XNextEvent 14
XNextEvent 99
setResolution 1280 720
FATAL:  failed: Operation not permitted

Trouble is I am already launching it with sudo enigma2

lspci |grep VGA shows:
03:00.0 VGA compatible controller: NVIDIA Corporation ION VGA (rev b1)

Hi,

Try to launch it with: sudo enigma2

Pr2

One a new installation of enigma2 openplipc with xine-lib 1.2.1 branch I get a green screen within seconds of starting enigma2
The motherboard is an intel atom with onboard nvidia and I have never run enigma2 there before (but vdr+xine run fine)

cat /tmp/enigma2_log.txt

/dev/fb0: No such file or directory
PYTHONPATH: /usr/local/e2/lib/enigma2/python
vo_vdpau: Use lock display synchronization for some vdpau calls
vo_vdpau: vdpau API version : 1
vo_vdpau: vdpau implementation description : NVIDIA VDPAU Driver Shared Library  295.20  Mon Feb  6 21:33:24 PST 2012
vo_vdpau: maximum video surface size for chroma type 4:2:2 is 4096x4096
vo_vdpau: maximum video surface size for chroma type 4:2:0 is 4096x4096
vo_vdpau: maximum output surface size is 8192x8192
vo_vdpau: hold a maximum of 10 video output surfaces for reuse
vo_vdpau: using 3 output surfaces of size 1920x1080 for display queue
vo_vdpau: this hardware doesn't support mpeg4-part2.
Display resolution 1920 1080
XINE-LIB version: 1.2.1openpliPC-e2
configfile  /usr/local/e2/share/enigma2/xine.conf
use vo_driver: auto
use ao_driver: auto
audio_alsa_out : supported modes are 8bit 16bit 24bit 32bit mono stereo (4-channel not enabled in xine config) (4.1-channel not enabled in xine config) (5-channel not enabled in xine config) (5.1-channel not enabled in xine config) (a/52 and DTS pass-through not enabled in xine config)
input_bluray: (bluray_class_get_instance:1446) bluray_class_get_instance
input_bluray: (bluray_class_get_instance:1446) bluray_class_get_instance
vo_vdpau: deinterlace: none
vo_vdpau: set_scaling_level=0
vo_vdpau: enabled features: inverse_telecine=0
vo_vdpau: disable noise reduction.
vo_vdpau: disable sharpness.
vo_vdpau: vdpau_update_csc: hue=0.000000, saturation=1.000000, contrast=1.000000, brightness=0.000000, color_standard=0 studio_levels=1
vo_vdpau: skip_chroma = 0
xine: found input plugin  : file input plugin
ebml: invalid EBML ID size (0x0) at position 1
ebml: Invalid EBML length size (0x0) at position 2
ebml: invalid master element
demux_dts: unsupported DTS stream type, or not a DTS stream
xine: found demuxer plugin: Elementary MPEG stream demux plugin
setResolution 720 576
vo_vdpau: background_color = 0
XNextEvent 19
XNextEvent 12
adapter0/demux0: reset stateexecuting main
Event Received!
setResolution 1280 720
FATAL:  failed: Operation not permitted