LVM

Yes, @Wanwizard, I came to the same conclusion - the NW manager is hanging bcs. the defined mount is not reachable. Is there another way to cancel the process of accessing the network mount, beside just hard reboot?

Thank you all for the replies!

I did not flashed any new image, instead just updated already installed and worked 9.0 version of OpenPli.

However, I managed to resolve the issue with blocked/freeze TV after pressing button to manipulate/configure the network mount.

My NW mount is on a DreamBox 800, which has NewNigma installed as OS.

First of all, I changed the network cable of the drreambox and then I changed the gateway option in the network configuration from yes to no.

This way I was able to see the dreambox as a network resource in the network menu of Et4000 xtrend device.

Once done, everything else worked smooth and I am able again to (re)configure the network resources.

Thank you all for your support so far!

Hi, thank you both for the replies!

@littlesat, I assume my network adapter is configured correctly and the gateway is the right one, otherwise I will not be able to check for updates, etc.

The device only freezes once I try something in the network browser, like deactivate a network mount, etc.

@rantaplan,

I am not aware how to activate debuglog, however I have found following in the internet:

Problems and Solutions - OpenPLi Wiki

Under point 5 there are instructions how to start Enigma in debug mode.

Is this what you are asking me to do?

I am arfaid, this is not going to work, as the OpenPli freezes once I do something in Network browser.

Ich kenne FlashExpander nur für Dream images. Habe das in OpenPli nie wirkend gesehen…

Ich benutze Flash Expander für 2 Jahre jetzt und bislang keine Problemen gehabt.

INstalliert habe ich den PlugIn auf dem xTrend et4000 mit OpenPLi 7.3.

Es scheint mir so, dass ich jetzt 8.3 installiere und dann PlugIn Mover versuche zu installieren, anstatt Flash Expander.

 

Does closed source license means that on new devices, like DreamBox seven UHD, it will not be possible to install OpenPLi or any other similar OS?

 

Closed source means there is no more access to the source code, and you are no longer free to install it on other hardware than on a Dreambox.
 

 

...and not only that, but also not able to modify or use modified Enigma GUI, respectively no open source OS, but only the original DreamBox disctribution, correct?

If yes, this means, I will not be able to use oscam for card sh....g?