Jump to content

  2. → Viewing Profile: Posts: vasily9760

vasily9760

Member Since 3 Oct 2022
Offline Last Active 04 Oct 2022 16:32
-----

Posts I've Made

In Topic: OpenPli 8.3 Release online in the downloadsection.

4 October 2022 - 13:33

please answer in telnet:

grep -r "" /proc/stb/audio
openpli 8.3-release Formuler-F1
 
Formuler-F1 login: root
Password:
root@Formuler-F1:~# grep -r "" /proc/stb/audio
/proc/stb/audio/ac3:passthrough
/proc/stb/audio/dts:passthrough
/proc/stb/audio/j1_mute:0
/proc/stb/audio/3dsurround:center
/proc/stb/audio/ac3_choices:downmix passthrough
/proc/stb/audio/dts_choices:downmix passthrough
/proc/stb/audio/audio_delay_pcm:0
/proc/stb/audio/autovolumelevel:disabled
/proc/stb/audio/3dsurround_choices:disabled center wide extrawide
/proc/stb/audio/audio_delay_bitstream:0
/proc/stb/audio/3dsurround_softlimiter:disabled
/proc/stb/audio/autovolumelevel_choices:disabled enabled
/proc/stb/audio/3dsurround_softlimiter_choices:disabled enabled
root@Formuler-F1:~#
 
Yes, here I see the value is off, but in the standard PLi-FullNightHD skin, as in any other, this value is missing.

In Topic: OpenPli 8.3 Release online in the downloadsection.

3 October 2022 - 20:07

 

 

 

hello, tell me if there were changes in the audio codecs?
 
after switching from 8.2 to 8.3, the sound quality deteriorated to my ears, the sound became blurry, the detail (clarity) disappeared
 
the h51 box is connected via hdmi to the TV then by optics to a two-channel DAC

 

Hello! I also noticed that the sound has changed significantly. In version 7.3 or 8.2 of the audio/video setup menu, the surround speaker position option may be disabled. But in version 8.3 this is not possible. I think that's the problem.

 

8.3 is "disabled" : _("off") option

 

 

For the experiment, the avswitch.pyo file from version 8.3 was replaced with the avswitch.pyo file from version 8.2 using ftp, as a result of which the value turned off appeared. The sound from the center channel no longer mixes with the sound of the center speakers. Everything fell into place as before.


In Topic: OpenPli 8.3 Release online in the downloadsection.

3 October 2022 - 18:52

 

 

 

hello, tell me if there were changes in the audio codecs?
 
after switching from 8.2 to 8.3, the sound quality deteriorated to my ears, the sound became blurry, the detail (clarity) disappeared
 
the h51 box is connected via hdmi to the TV then by optics to a two-channel DAC

 

Hello! I also noticed that the sound has changed significantly. In version 7.3 or 8.2 of the audio/video setup menu, the surround speaker position option may be disabled. But in version 8.3 this is not possible. I think that's the problem.

 

8.3 is "disabled" : _("off") option

In graphical menu version 8.3, this parameter has 3 values:

1. center
2. wide
3. extra wide. Whereas in version 8.2 or 7.3 this parameter has 4 values:
1. center
2. wide
3. extra wide
4. off

 

But in version 8.3 there is a 3d soft limiter parameter. Turning it on or off doesn't change anything.


In Topic: OpenPli 8.3 Release online in the downloadsection.

3 October 2022 - 16:06

 

hello, tell me if there were changes in the audio codecs?
 
after switching from 8.2 to 8.3, the sound quality deteriorated to my ears, the sound became blurry, the detail (clarity) disappeared
 
the h51 box is connected via hdmi to the TV then by optics to a two-channel DAC

 

Hello! I also noticed that the sound has changed significantly. In version 7.3 or 8.2 of the audio/video setup menu, the surround speaker position option may be disabled. But in version 8.3 this is not possible. I think that's the problem.


  1. Forums
  2. → Viewing Profile: Posts: vasily9760