liam79

"Kind of Solved" but this is terrible!

if you want to use stream relay (oscam icam) then you need to DISABLE the "sent http stream decode"

if you want to stream pay tv from box then you need to ENABLE the "sent http stream decode"

 lets see if others can confirm this

See post #9.

my openpli 7.3 could handle lots of streams like you said, no matter if encrypted or not. But i am having this issue on openpli 8.3.

Which logs should i check? I try to figure out what causing it. Can it be some oscam parameter?

 

I have put the box in standby and i can stream 2 channels parallel from it, however one of the channel has to be FTA. Now it is clear, it can not handle 2 parallel channel decode.

 

Absolutely not true.

 

My Duo 4K has a record of 11 simultaneous recordings, so it can handle 11 simultaneous streams too.

 

You have a local problem which you need to debug. Starting by answering my questions.

 

I have put the box in standby and i can stream 2 channels parallel from it, however one of the channel has to be FTA. Now it is clear, it can not handle 2 parallel channel decode. 

Setup here is simple, oscam r11716-798  in the VU+ box and oscam ubuntu server with smargo local card.

Oscam on the box, or oscam on your local server?

 

If Oscam on the local box doesn't see it (log lines like so)

2022/12/22 21:40:01 55840CD0 c      (ecm) dvbapiau (0100@00006A/5C00/1B7C/64:CE244881A278DC24AE2801D7E2FDAE13): found (394 ms) by xp1000 - RTL 8 HD

then you don't have a channel tuned.

 

If Oscam on the server box doesn't see it, you have a connection or a service filtering issue between the local oscam and the server oscam.

well, the openpli 7.3 to 8.3 upgrade was done using config backup-restore, so i would expect all working the same way. I never used record function for different channel, i will test that but not important. The main thing is 2 pay tv decode/watch should be possible.

If you don't see the request in Oscam, the channel isn't tuned. You wouldn't be the first with FBC tuner configuration issues.

 

Do you have the same problem when you record a channel and try to watch a second?

I dont use CI modul but local cards in 2 local servers. As opening the pay tv stream (2nd channel) doesnt work, i dont see anything about it in oscam.

Using a CI module? Because they are limited to one or two channels from the same transponder.

 

Otherwise, it should just work.

 

Do you see ECM requests for the second channel in the oscam log file? And do you see ok responses?