Zuropy

What file do you want me to upload?

- The reference frequency 690Mhz

Could you save the data from pid 17 and put the file here?

I have already managed to solve it in system/tuners/cable options, there is an option at the end where it says search for cable deactivate the option as you see in the photo it is the frequency at which the script began 474mhz which is the frequency at which it failed and created the gap.

- The Network ID  41025

- The reference frequency  690Mhz

- The QAM used  64Qam

this is a master frecuency an id network and modulation to seach my provider, if i put this, not error

I have correctly executed the command that you have indicated to me, the userbouquet..tv was deleted and the service that was inside bouquet.tv was also deleted.
but it reappeared once the receiver was set to stamby. I have come to the conclusion that I think it is caused by the plugin enigma2-plugin-systemplugins-cablescan - 2.7+git19711+2d6416e-r0.0
that in the log is the one that does an autocablescan and gives some error and creates that bouquet, once that plugin has been deleted, which is already integrated into the opepli 8.3 system itself, and after restarting the receiver at the moment it has not generated any new bouquet, I have noticed that it only happens in combo receivers that have a dvb-c/t cable tuner. Tomorrow I will attach the log that it gave me before and after having eliminated said plugin. I have guided myself since this process began in the log before creating the bouquet.
[eCableScan] state 2
[eCableScan] state 6
[eDVBDB] can't open /etc/enigma2/.../userbouquet..tv: No such file or directory
can't load bouquet userbouquet..tv
[eDVBDB] Renumbering...
[eDVBDB] ---- saving lame channel db
[eDVBDB] saved 137 channels and 1572 services!
[AutoCableScan] completed result = -1

I put the receiver in debug mode all afternoon, logging everything from the console, and since then and after deleting the userboquet..tv, with the command it hasn't worked so far, I'll wait a while longer. In the time that I have had the receiver on, it has not done anything strange but when I put the receiver in standby, it appeared shortly after. I will post the log that I have been able to collect. FULL LOG IS ATTACH

[eDVBFrontend1] opening frontend

[eDVBFrontend1] setVoltage FE_ENABLE_HIGH_LNB_VOLTAGE 0 FE_SET_VOLTAGE 2

[eDVBChannel] getDemux cap=00

[eDVBResourceManager] allocate demux cap=00

[eDVBResourceManager] allocating demux adapter=0, demux=0, source=1 fesource=1

[eDVBDemux] open demux /dev/dvb/adapter0/demux0

[eDVBFrontend1] tune

[eDVBFrontend1] tuning to 474000 khz, sr 6875000, fec 0, modulation 3, inversion                                                                                        2

[eDVBFrontend1] tune setting type to 1 from 0

[eDVBChannel] OURSTATE: tuning

[eCableScan] state 1

[Skin] Processing screen 'Standby', position=(0, 0), size=(1920 x 1080) for modu                                                                                       le 'CableScanAutoScreen'.

[Skin] Processing screen 'StandbySummary', position=(0, 0), size=(-1 x -1) for m                                                                                       odule 'StandbySummary'.

[Screen] Showing screen 'StandbySummary'.

[Screen] Showing screen 'Standby'.

[eDVBFrontend1] startTuneTimeout 5000

[eDVBFrontend1] setFrontend 1

[eDVBFrontend1] setting frontend

[eDVBFrontend1] fe event: status 0, inversion off, m_tuning 1

[eDVBFrontend1] fe event: status 20, inversion off, m_tuning 2

[eDVBFrontend1] FE_TIMEDOUT! ..abort

[eDVBChannel] OURSTATE: failed, fatal

[eCableScan] state 2

[eCableScan] state 6

[eDVBDB] can't open /etc/enigma2/.../userbouquet..tv: No such file or directory

can't load bouquet userbouquet..tv

[eDVBDB] Renumbering...

[eDVBDB] ---- saving lame channel db

[eDVBDB] saved 137 channels and 1572 services!

[AutoCableScan] completed result =  -1

[Screen] Showing screen 'StandbySummary'.

[Screen] Showing screen 'Standby'.

[AutoCableScan] Scan was not successful retry in one hour

[eDVBFrontend1] close frontend

[eDVBFrontend1] sendTone allowed only in feSatellite (1)

[eDVBFrontend1] setVoltage FE_ENABLE_HIGH_LNB_VOLTAGE 0 FE_SET_VOLTAGE 2

Getting attribute  ip  for adapter eth0

 

[Avahi] avahi_timeout_free

[Avahi] Registered h8 (_e2stream._tcp) on h8:8001

[eInit] + (41) Encoders

[eInit] + (41) eServiceFactoryDVB

[eInit] + (41) eServiceFactoryFS

[eInit] + (41) eServiceFactoryM2TS

[eInit] + (41) eServiceFactoryHDMI

[eInit] + (41) eServiceFactoryTS

[eInit] + (41) eServiceFactoryWebTS

[eInit] + (41) eServiceFactoryDVD

[eInit] reached rl 70

[eDVBDB] ---- opening lame channel db

[eDVBDB] reading services (version 4)

[eDVBDB] loaded 137 channels/transponders and 1572 services

eDVBSatelliteEquipmentControl::clear()

[eDVBResourceManager] scanning for frontends..

[eDVBFrontend0] opening frontend

[eDVBFrontend0] opening frontend

[eDVBFrontend0] frontend 0 has DVB API 50a

[eDVBFrontend0] setVoltage FE_ENABLE_HIGH_LNB_VOLTAGE 0 FE_SET_VOLTAGE 2

[eDVBFrontend0] close frontend

[eDVBFrontend0] setVoltage FE_ENABLE_HIGH_LNB_VOLTAGE 0 FE_SET_VOLTAGE 2

[eDVBFrontend1] opening frontend

[eDVBFrontend1] opening frontend

[eDVBFrontend1] frontend 1 has DVB API 50a

[eDVBFrontend1] setVoltage FE_ENABLE_HIGH_LNB_VOLTAGE 0 FE_SET_VOLTAGE 2

[eDVBFrontend1] close frontend

[eDVBFrontend1] setVoltage FE_ENABLE_HIGH_LNB_VOLTAGE 0 FE_SET_VOLTAGE 2

[eDVBAdapterLinux] get demux 0

[eDVBAdapterLinux] get demux 1

[eDVBAdapterLinux] get demux 2

[eDVBResourceManager] found 1 adapter, 2 frontends(2 sim) and 3 demux

[eDVBLocalTimeHandler] Use valid Linux Time (RTC?)

[eEPGCache] Initialized EPGCache (wait for setCacheFile call now)

[eEPGTransponderDataReader] Initialized

[MAIN] Loading spinners...

[MAIN] found 7 spinner!

[MAIN] executing main

[setIoPrio] best-effort level 3 ok

[HardwareInfo] Scanning hardware info

Detected: H8.2H (1-2)

[eDVBFrontend] Failed to open /dev/dbox/fp0

[Misc_Options] 12Vdetect cannot open /proc/stb/misc/12V_output: No such file or                                                                                        directory

[Console] command: mount /dev/mtdblock2 /tmp/MultibootdcG2WL

[eConsoleAppContainer] Starting /bin/sh

[Console] command: umount /tmp/MultibootdcG2WL

[eConsoleAppContainer] Starting /bin/sh

[Multiboot] Bootslots found: {}

[Harddisk] enumerating block devices...

couldn't read model:  [Errno 2] No such file or directory: '/sys/devices/virtual                                                                                       /mtd/mtd10/model'

couldn't read model:  [Errno 2] No such file or directory: '/sys/devices/virtual                                                                                       /mtd/mtd0/model'

couldn't read model:  [Errno 2] No such file or directory: '/sys/devices/virtual                                                                                       /mtd/mtd1/model'

couldn't read model:  [Errno 2] No such file or directory: '/sys/devices/virtual                                                                                       /mtd/mtd2/model'

couldn't read model:  [Errno 2] No such file or directory: '/sys/devices/virtual                                                                                       /mtd/mtd3/model'

couldn't read model:  [Errno 2] No such file or directory: '/sys/devices/virtual                                                                                       /mtd/mtd4/model'

couldn't read model:  [Errno 2] No such file or directory: '/sys/devices/virtual                                                                                       /mtd/mtd5/model'

couldn't read model:  [Errno 2] No such file or directory: '/sys/devices/virtual                                                                                       /mtd/mtd6/model'

couldn't read model:  [Errno 2] No such file or directory: '/sys/devices/virtual                                                                                       /mtd/mtd7/model'

couldn't read model:  [Errno 2] No such file or directory: '/sys/devices/virtual                                                                                       /mtd/mtd8/model'

couldn't read model:  [Errno 2] No such file or directory: '/sys/devices/virtual                                                                                       /mtd/mtd9/model'

[Keyboard] Adding keymap 'Dreambox Keyboard English' ('eng.kmap').

[Keyboard] Adding keymap 'Default (US)' ('default.kmap').

[Keyboard] Adding keymap 'Dreambox Keyboard Deutsch' ('dream-de.kmap').

[Keyboard] Adding keymap 'azerty keyboard' ('azerty.kmap').

[Keyboard] Adding keymap 'German keyboard' ('de.kmap').

Activating language Español

[Keyboard] Activating keymap: 'Default (US)'.

[Console] command: loadkmap < /usr/share/keymaps/default.kmap

[eConsoleAppContainer] Starting /bin/sh

[Geolocation] Warning: Geolocation has been disabled by user configuration!

[NimManager] Reading satellites.xml

[NimManager] Reading cables.xml

[NimManager] Reading terrestrial.xml

[InitNimManager] enable combined tuner type(s) DVB-C

eDVBSatelliteEquipmentControl::clear()

[SecConfigure] sec config cleared

[eDVBFrontend] setSlotInfo for dvb frontend 0 to slotid 0, descr hi3716, need ro                                                                                       torworkaround No, enabled Yes, DVB-S2 Yes

[eDVBFrontend] setSlotInfo for dvb frontend 1 to slotid 1, descr