fennec

 

I have the geniatech T230 working on my mutant HD2400
installed
kernel-module-dvb-usb-cxusb
firmware-dvb-fe-si2168
kernel-module-si2157
kernel-module-si2168
 
...

 
Hi,

I just test again the MyGica T230 USB DVB-C/T/T2 stick on my box with OpenPLi 6.x

The package:  firmware-dvb-fe-si2168 no longer exist in the repository.

So you need to install the following packages too:

firmware-dvb-demod-si2168-b40
firmware-dvb-tuner-si2158-a20

So the full list to install is:
 

opkg update && opkg install kernel-module-dvb-usb-cxusb \
kernel-module-si2157 \
kernel-module-si2168 \
firmware-dvb-demod-si2168-b40 \
firmware-dvb-tuner-si2158-a20

Reboot the box after installation.

Based on this:
https://www.linuxtv..../Geniatech_T230

 

Remark:

If you don't install the firmware (so only the kernel modules) your USB stick will be detected and integrated in the OpenPLi menu but it will not work. You will always get no signal.

Pr2

 

Hi Pr2

 

I try to install my MyGica T230 USB DVB-C/T/T2 on duo2 with openpli 6.2

 

On my DUO2 with 4 tuners installed 2 sat and 2 TNT

 

but i have error

usb 3-1: new high-speed USB device number 2 using ehci-brcm
usb 3-1: config 1 interface 0 altsetting 0 bulk endpoint 0x86 has invalid maxpacket 188
usb 3-1: string descriptor 0 malformed (err = -61), defaulting to 0x0409
brcmnand brcmnand.0: corrected error at 0x1c688e00

i install 

kernel-module-dvb-usb-cxusb 

firmware-dvb-demod-si2168-b40 
firmware-dvb-tuner-si2158-a20

 

But no package 

 

kernel-module-si2157 

kernel-module-si2168

 

Is it normal 

 

Thanks

And adapted hdmicec.py for ignore command 44

Thanks pr2

Yes i use remote tv, android tv so most completely than vu+

I try change hdmi cable nothing

In record mode i have phantom effect when vu reveive 44