Jump to content

  2. → Viewing Profile: Topics: shy11

shy11

Member Since 20 May 2013
Offline Last Active 27 Jun 2020 06:37
-----

Topics I've Started

MAC Address Change

22 June 2020 - 06:54

Hi there,

 

May I knwo how I can chnage teh MAC address of my interface? I'm using 7.2

 

many Thanks


Can not write to USB HD

14 April 2020 - 06:33

Hi There,

 

I need everyones help.

Recently I have chnaged my STB from DM800HD to Octagon SF8008.

I have connected Internal DM800HD Hard Disk to USB3 of Octagon in External HDD Enclouser.

 

I was able to write and read from this HDD after conenctiong to Octagon, how ever since last few days I can not write anything to it.

 

I have tried different images but issue remian same.

 

I can play movies, access the HDD in ftp. I have anoter SD card in sd card slot which works fine for Read Write

 

I have grabed follwing info of monut from terminal

 

Disk /dev/sdc: 298.9 GiB, 320072933376 bytes, 625142448 sectors    (Hard Disk)
Disk model: 00BEKT-75PVMT1
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x0919e154
 
Disk /dev/sda: 59.49 GiB, 63864569856 bytes, 124735488 sectors    (sd CARD)
Disk model: STORAGE DEVICE
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x29fc8ef0
 
/dev/sda1: UUID="25b6254f-8b80-4093-88d9-e470abab791d" BLOCK_SIZE="4096" TYPE="ext4" PARTUUID="29fc8ef0-01"
/dev/sdc1: LABEL="hdd" UUID="10cf7997-54c8-4bf1-9f40-51997452aac2" BLOCK_SIZE="4096" TYPE="ext3" PARTUUID="0919e154-01"
/dev/mmcblk0p3: SEC_TYPE="msdos" UUID="2B9B-CF4D" BLOCK_SIZE="512" TYPE="vfat"
/dev/mmcblk0p13: UUID="3de067cf-18c8-4c29-ba78-6499d003d3eb" BLOCK_SIZE="4096" TYPE="ext4"
 
dev/root on / type ext4 (rw,relatime,data=ordered)
devtmpfs on /dev type devtmpfs (rw,relatime,size=469344k,nr_inodes=117336,mode=755)
proc on /proc type proc (rw,relatime)
sysfs on /sys type sysfs (rw,relatime)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
configfs on /sys/kernel/config type configfs (rw,relatime)
tmpfs on /media type tmpfs (rw,relatime,size=64k,nr_inodes=117405)
tmpfs on /var/volatile type tmpfs (rw,relatime,size=469620k,nr_inodes=117405)
/dev/sda1 on /media/hdd type ext4 (rw,relatime,data=ordered)
/dev/sdc1 on /media/usb type ext4 (rw,relatime,data=ordered)
/dev/mmcblk0p3 on /boot type vfat (rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
devpts on /dev/pts type devpts (rw,relatime,gid=5,mode=620)
fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime)
/etc/auto.network on /media/autofs type autofs (rw,relatime,fd=6,pgrp=2010,timeout=5,minproto=5,maxproto=5,indirect)

 

 


How to use S/PDIF Audio on my Dreambox.

13 September 2019 - 03:47

Hello there,

I am using Openpli on my Dreambox and intend to connect SPDIF interface to my 5.1 audio system, i have noticed that even it is connected Dreambox output Audio through DVI interface.

could someone guide/explain the best practice for this connection? any related setting?

i know only AC3 Downmix which must be OFF to get all 5.1 channels.

Answer would the Appreciated

  1. Forums
  2. → Viewing Profile: Topics: shy11