jimmyhand

Hi all,

since yesterday, I'm only able to receive FTA channels. Nothing was changed. This evening I was looking around the net and I tried to update the softcam. Don't know if this actually happened. Anyway, now I can't enter my HDD with recorded stuff, either. I get this message:
your stb encountered a software problem and will be restarted. Mail crashrepprt ...

So, does anybody know why I suddenly cannot receive any channels anymore? Where do I have to look to find the possible causes?

Below's the crash report.
Thanks in advance!

<?xml version="1.0" encoding="utf-8"?>
<openpli>
	<enigma2>
		<crashdate>di jul 16 20:52:37 2013</crashdate>
		<compiledate>Jul 15 2013</compiledate>
		<contactemail>forum at www.openpli.org</contactemail>
		<!-- Please email this crashlog to above address -->
		<skin>./skin.xml</skin>
		<sourcedate>2013-07-14</sourcedate>
		<branch>(no branch)</branch>
		<rev>935e928</rev>
		<version>3.0.0</version>
	</enigma2>
	<image>
		<stbmodel>duo</stbmodel>
		<kernelversion>
			<![CDATA[
Linux vuduo 3.1.1 #1 SMP Wed Jul 25 05:26:44 CEST 2012 mips GNU/Linux
]]>
		</kernelversion>
		<kernelcmdline>bmem=112M ubi.mtd=0 root=ubi0:rootfs rootfstype=ubifs rw rootflags=sync bmem=112M</kernelcmdline>
		<nimsockets>NIM Socket 0:</nimsockets>
		<imageversion>
			<!-- No such file or directory -->
		</imageversion>
		<imageissue>
			<![CDATA[
openpli 3.0 %h

]]>
		</imageissue>
	</image>
	<crashlogs>
		<enigma2crashlog>
			<![CDATA[
ctBaseActions showSatellites
eStaticServiceDVBBouquetInformation::getName failed.. getBouquet failed!
Renumbering...
Renumbering...
Renumbering...
Renumbering...
Renumbering...
Renumbering...
Renumbering...
Renumbering...
Renumbering...
Renumbering...
Renumbering...
Renumbering...
Renumbering...
Renumbering...
Renumbering...
Renumbering...
Renumbering...
Renumbering...
Renumbering...
[EPGC] abort non avail schedule other reading
[eDVBLocalTimerHandler] diff is -6
[eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
[EPGC] abort non avail netmed schedule reading
[EPGC] abort non avail netmed schedule other reading
[EPGC] abort non avail FreeSat schedule_other reading
[EPGC] abort non avail viasat reading
[EPGC] abort non avail mhw reading
[eDVBLocalTimerHandler] update RTC
[eDVBLocalTimerHandler] time update to 20:49:42
[eDVBLocalTimerHandler] m_time_difference is -6
[eDVBLocalTimerHandler] set Linux Time
action ->  ChannelSelectBaseActions showFavourites
action ->  OkCancelActions ok
[EPGC] nownext finished(1374000590)
action ->  OkCancelActions ok
playing 1:0:1:FB0:451:35:C00000:0:0:0:
[eDVBCAService] free slot 0 demux 0 for service 1:0:16:178E:C82:3:EB0000:0:0:0:
[eDVBCAService] free service 1:0:16:178E:C82:3:EB0000:0:0:0:
decoder state: play, vpid=-1, apid=-1
DEMUX_STOP - pcr - ok
DEMUX_STOP - video - ok
VIDEO_STOP - ok
AUDIO_STOP - ok
DEMUX_STOP - audio - ok
AUDIO_CONTINUE - ok
start release channel timer
not pauseable.
not pauseable.
RemovePopup, id = ZapError
[eDVBLocalTimerHandler] remove channel 0x7466be90
[eEPGCache] remove channel 0x7466be90
[EPGC] abort caching events !!
allocate channel.. 0451:0035
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 0 Freq 12515000 Pol 0 SR 22000000 INV 2 FEC 4 orbpos 192 system 0 modulation 1 pilot 2, rolloff 0
tuning to 1915 mhz
OURSTATE: tuning
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:1:FB0:451:35:C00000:0:0:0:
allocate demux
[SEC] set static current limiting
[SEC] setTone 0
[SEC] sleep 25ms
[SEC] setVoltage 2
[SEC] sleep 20ms
set sequence pos 3
[SEC] invalidate current switch params
[SEC] sendDiseqc: e01038f7(?)
[SEC] sleep 50ms
set sequence pos 3
[SEC] setTone 1
[SEC] sleep 10ms
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion on, m_tuning 1
[SEC] sleep 500ms
(0)fe event: status 1f, inversion off, m_tuning 2
OURSTATE: ok
[eDVBLocalTimerHandler] channel 0x7466be90 running
[eEPGCache] channel 0x7466be90 running
[EPGC] next update in 51 min
stop release channel timer
ok ... now we start!!
eventNewProgramInfo 0 0
have 1 video stream(s) (020d), and 1 audio stream(s) (007a), and the pcr pid is 1ffe, and the text pid is 0028
allocate demux
decoder state: play, vpid=525, apid=122
DMX_SET_PES_FILTER(0x1ffe) - pcr - ok
DEMUX_START - pcr - ok
DMX_SET_PES_FILTER(0x7a) - audio - ok
DEMUX_START - audio - ok
AUDIO_SET_BYPASS(1) - ok
AUDIO_PAUSE - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 0 - ok
DMX_SET_PES_FILTER(0x20d) - video - ok
DEMUX_START - video - ok
VIDEO_FREEZE - ok
VIDEO_PLAY - ok
DMX_SET_PES_FILTER(0x28) - ttx - ok
DEMUX_START - ttx - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
AUDIO_CONTINUE - ok
disable teletext subtitles
not pauseable.
not pauseable.
[eDVBCAService] new service 1:0:1:FB0:451:35:C00000:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:1:FB0:451:35:C00000:0:0:0:
RemovePopup, id = ZapError
PATready
use pmtpid 0844 for service_id 0fb0
[SEC] set dynamic current limiting
eventNewProgramInfo 0 0
have 1 video stream(s) (020d), and 1 audio stream(s) (007a), and the pcr pid is 1ffe, and the text pid is 0028
decoder state: play, vpid=525, apid=122
[eDVBCIInterfaces] gotPMT
[eDVBLocalTimerHandler] diff is 1
[eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
[eDVBLocalTimerHandler] update RTC
[eDVBLocalTimerHandler] time update to 20:49:53
[eDVBLocalTimerHandler] m_time_difference is 1
[eDVBLocalTimerHandler] set Linux Time
VIDEO_GET_EVENT - ok
VIDEO_GET_EVENT - ok
VIDEO_GET_EVENT - ok
sdt update done!
action ->  GlobalActions volumeUp
Setvolume: 65 65 (raw)
Setvolume: 23 23 (-1db)
setValue 65
action ->  GlobalActions volumeUp
Setvolume: 70 70 (raw)
Setvolume: 19 19 (-1db)
setValue 70
action ->  GlobalActions volumeUp
Setvolume: 75 75 (raw)
Setvolume: 16 16 (-1db)
setValue 75
action ->  GlobalActions volumeUp
Setvolume: 80 80 (raw)
Setvolume: 13 13 (-1db)
setValue 80
action ->  GlobalActions volumeUp
Setvolume: 85 85 (raw)
Setvolume: 10 10 (-1db)
setValue 85
action ->  GlobalActions volumeUp
Setvolume: 90 90 (raw)
Setvolume: 7 7 (-1db)
setValue 90
action ->  InfobarChannelSelection switchChannelUp
action ->  OkCancelActions ok
playing 1:0:1:141F:C85:3:EB0000:0:0:0:
[eDVBCAService] free slot 0 demux 0 for service 1:0:1:FB0:451:35:C00000:0:0:0:
[eDVBCAService] free service 1:0:1:FB0:451:35:C00000:0:0:0:
decoder state: play, vpid=-1, apid=-1
DEMUX_STOP - pcr - ok
DEMUX_STOP - video - ok
VIDEO_STOP - ok
AUDIO_STOP - ok
DEMUX_STOP - audio - ok
AUDIO_CONTINUE - ok
DEMUX_STOP - ttx - ok
start release channel timer
not pauseable.
not pauseable.
RemovePopup, id = ZapError
[eDVBLocalTimerHandler] remove channel 0x7466be90
[eEPGCache] remove channel 0x7466be90
allocate channel.. 0c85:0003
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 1 Freq 11798000 Pol 0 SR 27500000 INV 2 FEC 3 orbpos 235 system 1 modulation 2 pilot 2, rolloff 2
tuning to 1198 mhz
OURSTATE: tuning
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:1:141F:C85:3:EB0000:0:0:0:
allocate demux
[SEC] set static current limiting
[SEC] setTone 0
[SEC] sleep 25ms
set sequence pos 7
[SEC] invalidate current switch params
[SEC] sendDiseqc: e01038fb(?)
[SEC] sleep 50ms
set sequence pos 3
[SEC] setTone 1
[SEC] sleep 10ms
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
[SEC] sleep 500ms
(0)fe event: status 1f, inversion on, m_tuning 2
OURSTATE: ok
[eDVBLocalTimerHandler] channel 0x7466be90 running
[eEPGCache] channel 0x7466be90 running
[EPGC] next update in 2 sec
stop release channel timer
ok ... now we start!!
eventNewProgramInfo 0 0
have 1 video stream(s) (07de), and 0 audio stream(s), and the pcr pid is 07de, and the text pid is ffffffff
allocate demux
decoder state: play, vpid=2014, apid=-1
DMX_SET_PES_FILTER(0x7de) - pcr - ok
DEMUX_START - pcr - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 0 - ok
DMX_SET_PES_FILTER(0x7de) - video - ok
DEMUX_START - video - ok
VIDEO_FREEZE - ok
VIDEO_PLAY - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
disable teletext subtitles
not pauseable.
not pauseable.
[eDVBCAService] new service 1:0:1:141F:C85:3:EB0000:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:1:141F:C85:3:EB0000:0:0:0:
RemovePopup, id = ZapError
PATready
use pmtpid 0b2d for service_id 141f
eventNewProgramInfo 0 0
have 1 video stream(s) (07de), and 1 audio stream(s) (07f2), and the pcr pid is 07de, and the text pid is ffffffff
decoder state: play, vpid=2014, apid=2034
DEMUX_STOP - video - ok
VIDEO_STOP - ok
DMX_SET_PES_FILTER(0x7f2) - audio - ok
DEMUX_START - audio - ok
AUDIO_SET_BYPASS(1) - ok
AUDIO_PAUSE - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 1 - ok
DMX_SET_PES_FILTER(0x7de) - video - ok
DEMUX_START - video - ok
VIDEO_FREEZE - ok
VIDEO_PLAY - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
AUDIO_CONTINUE - ok
start dvb subtitles on pid 0x086a with composition_page_id 2 and ancillary_page_id 2
[eDVBCIInterfaces] gotPMT
[SEC] set dynamic current limiting
sdt update done!
[EPGC] start caching events(1374000662)
setPage
setPage
setPage
add 0 482 720 36
disp width 720, disp height 576
action ->  InfobarChannelSelection switchChannelUp
setPage
action ->  OkCancelActions ok
playing 1:0:1:FB0:451:35:C00000:0:0:0:
[eDVBCAService] free slot 0 demux 0 for service 1:0:1:141F:C85:3:EB0000:0:0:0:
[eDVBCAService] free service 1:0:1:141F:C85:3:EB0000:0:0:0:
[EPGC] abort non avail schedule other reading
[EPGC] abort non avail netmed schedule reading
[EPGC] abort non avail netmed schedule other reading
[EPGC] abort non avail FreeSat schedule_other reading
[EPGC] abort non avail viasat reading
decoder state: play, vpid=-1, apid=-1
DEMUX_STOP - pcr - [EPGC] abort non avail mhw reading
ok
DEMUX_STOP - video - [EPGC] nownext finished(1374000669)
ok
VIDEO_STOP - ok
AUDIO_STOP - ok
DEMUX_STOP - audio - ok
AUDIO_CONTINUE - ok
start release channel timer
not pauseable.
not pauseable.
RemovePopup, id = ZapError
[eDVBLocalTimerHandler] remove channel 0x7466be90
[eEPGCache] remove channel 0x7466be90
[EPGC] abort caching events !!
allocate channel.. 0451:0035
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 0 Freq 12515000 Pol 0 SR 22000000 INV 2 FEC 4 orbpos 192 system 0 modulation 1 pilot 2, rolloff 0
tuning to 1915 mhz
OURSTATE: tuning
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:1:FB0:451:35:C00000:0:0:0:
allocate demux
[SEC] set static current limiting
[SEC] setTone 0
[SEC] sleep 25ms
set sequence pos 7
[SEC] invalidate current switch params
[SEC] sendDiseqc: e01038f7(?)
[SEC] sleep 50ms
set sequence pos 3
[SEC] setTone 1
[SEC] sleep 10ms
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion on, m_tuning 1
[SEC] sleep 500ms
(0)fe event: status 1f, inversion off, m_tuning 2
OURSTATE: ok
[eDVBLocalTimerHandler] channel 0x747e8460 running
[eEPGCache] channel 0x747e8460 running
stop release channel timer
ok ... now we start!!
[EPGC] next update in 49 min
eventNewProgramInfo 0 0
have 1 video stream(s) (020d), and 1 audio stream(s) (007a), and the pcr pid is 1ffe, and the text pid is 0028
allocate demux
decoder state: play, vpid=525, apid=122
DMX_SET_PES_FILTER(0x1ffe) - pcr - ok
DEMUX_START - pcr - ok
DMX_SET_PES_FILTER(0x7a) - audio - ok
DEMUX_START - audio - ok
AUDIO_SET_BYPASS(1) - ok
AUDIO_PAUSE - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 0 - ok
DMX_SET_PES_FILTER(0x20d) - video - ok
DEMUX_START - video - ok
VIDEO_FREEZE - ok
VIDEO_PLAY - ok
DMX_SET_PES_FILTER(0x28) - ttx - ok
DEMUX_START - ttx - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
AUDIO_CONTINUE - ok
disable teletext subtitles
not pauseable.
not pauseable.
[eDVBCAService] new service 1:0:1:FB0:451:35:C00000:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:1:FB0:451:35:C00000:0:0:0:
RemovePopup, id = ZapError
PATready
use pmtpid 0844 for service_id 0fb0
[SEC] set dynamic current limiting
eventNewProgramInfo 0 0
have 1 video stream(s) (020d), and 1 audio stream(s) (007a), and the pcr pid is 1ffe, and the text pid is 0028
decoder state: play, vpid=525, apid=122
[eDVBCIInterfaces] gotPMT
[eDVBCAService] don't build/send the same CA PMT twice
sdt update done!
[eDVBLocalTimerHandler] diff is 1
[eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
[eDVBLocalTimerHandler] update RTC
[eDVBLocalTimerHandler] time update to 20:51:13
[eDVBLocalTimerHandler] m_time_difference is 1
[eDVBLocalTimerHandler] set Linux Time
action ->  InfobarChannelSelection switchChannelUp
action ->  OkCancelActions ok
playing 1:0:1:2742:402:1:C00000:0:0:0:
[eDVBCAService] free slot 0 demux 0 for service 1:0:1:FB0:451:35:C00000:0:0:0:
[eDVBCAService] free service 1:0:1:FB0:451:35:C00000:0:0:0:
decoder state: play, vpid=-1, apid=-1
DEMUX_STOP - pcr - ok
DEMUX_STOP - video - ok
VIDEO_STOP - ok
AUDIO_STOP - ok
DEMUX_STOP - audio - ok
AUDIO_CONTINUE - ok
DEMUX_STOP - ttx - ok
start release channel timer
not pauseable.
not pauseable.
RemovePopup, id = ZapError
[eDVBLocalTimerHandler] remove channel 0x747e8460
[eEPGCache] remove channel 0x747e8460
allocate channel.. 0402:0001
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 0 Freq 11597000 Pol 1 SR 22000000 INV 2 FEC 4 orbpos 192 system 0 modulation 1 pilot 2, rolloff 0
tuning to 1847 mhz
OURSTATE: tuning
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:1:2742:402:1:C00000:0:0:0:
allocate demux
[SEC] set static current limiting
[SEC] setTone 0
[SEC] sleep 25ms
[SEC] setVoltage 1
[SEC] sleep 20ms
set sequence pos 3
[SEC] invalidate current switch params
[SEC] sendDiseqc: e01038f4(?)
[SEC] sleep 50ms
set sequence pos 3
set sequence pos 3
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
[SEC] sleep 500ms
(0)fe event: status 1f, inversion off, m_tuning 2
OURSTATE: ok
[eDVBLocalTimerHandler] channel 0x747e8460 running
[eEPGCache] channel 0x747e8460 running
stop release channel timer
[EPGC] next update in 53 min
ok ... now we start!!
eventNewProgramInfo 0 0
have 1 video stream(s) (00a3), and 1 audio stream(s) (005c), and the pcr pid is 00a3, and the text pid is ffffffff
allocate demux
decoder state: play, vpid=163, apid=92
DMX_SET_PES_FILTER(0xa3) - pcr - ok
DEMUX_START - pcr - ok
DMX_SET_PES_FILTER(0x5c) - audio - ok
DEMUX_START - audio - ok
AUDIO_SET_BYPASS(1) - ok
AUDIO_PAUSE - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 0 - ok
DMX_SET_PES_FILTER(0xa3) - video - ok
DEMUX_START - video - ok
VIDEO_FREEZE - ok
VIDEO_PLAY - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
AUDIO_CONTINUE - ok
disable teletext subtitles
not pauseable.
not pauseable.
[eDVBCAService] new service 1:0:1:2742:402:1:C00000:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:1:2742:402:1:C00000:0:0:0:
RemovePopup, id = ZapError
[SEC] set dynamic current limiting
PATready
use pmtpid 0742 for service_id 2742
eventNewProgramInfo 0 0
have 1 video stream(s) (00a3), and 1 audio stream(s) (005c), and the pcr pid is 00a3, and the text pid is ffffffff
decoder state: play, vpid=163, apid=92
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
AUDIO_CONTINUE - ok
[eDVBCIInterfaces] gotPMT
[eDVBCAService] don't build/send the same CA PMT twice
VIDEO_GET_EVENT - ok
sdt update done!
[eDVBLocalTimerHandler] diff is 8
[eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
[eDVBLocalTimerHandler] update RTC
[eDVBLocalTimerHandler] time update to 20:52:07
[eDVBLocalTimerHandler] m_time_difference is 8
[eDVBLocalTimerHandler] set Linux Time
action ->  InfobarActions showMovies
[ePNG] couldn't open /usr/share/enigma2/skin_default/icons/rep.png
Traceback (most recent call last):
  File "/usr/lib/enigma2/python/Components/ActionMap.py", line 46, in action
  File "/usr/lib/enigma2/python/Screens/InfoBar.py", line 123, in showMovies
  File "/usr/lib/enigma2/python/mytest.py", line 294, in openWithCallback
    dlg = self.open(screen, *arguments, **kwargs)
  File "/usr/lib/enigma2/python/mytest.py", line 304, in open
    dlg = self.current_dialog = self.instantiateDialog(screen, *arguments, **kwargs)
  File "/usr/lib/enigma2/python/mytest.py", line 234, in instantiateDialog
    return self.doInstantiateDialog(screen, arguments, kwargs, self.desktop)
  File "/usr/lib/enigma2/python/mytest.py", line 270, in doInstantiateDialog
    dlg.applySkin()
  File "/usr/lib/enigma2/python/Components/GUISkin.py", line 112, in applySkin
  File "/usr/lib/enigma2/python/Components/GUISkin.py", line 30, in createGUIScreen
  File "/usr/lib/enigma2/python/Components/Pixmap.py", line 102, in applySkin
  File "/usr/lib/enigma2/python/skin.py", line 247, in loadPixmap
skin.SkinError: {./skin.xml}: pixmap file /usr/share/enigma2/skin_default/icons/rep.png not found!. Please contact the skin's author!
(PyObject_CallObject(<bound method HelpableActionMap.action of <Components.ActionMap.HelpableActionMap instance at 0x14f42b0>>,('InfobarActions', 'showMovies')) failed)
main thread is non-idle! display spinner!
getResolvedKey config.plugins.crashlogautosubmit.sendAnonCrashlog failed !! (Typo??)
getResolvedKey config.plugins.crashlogautosubmit.addNetwork failed !! (Typo??)
getResolvedKey config.plugins.crashlogautosubmit.addWlan failed !! (Typo??)
]]>
		</enigma2crashlog>
	</crashlogs>
</openpli>