cyaneo

Danke für den Hinweis, ich hab sie sowieso durch eine WD RED ersetzt (ext4), die Green werkelt nun in einem Windows Rechner (NTFS).

Habe inzwischen einen Ubuntu Server aufgesetzt und die Dateien nun auf eine 2 HDD sichern können (ca. 1.2TB, dauerte ca. 2 Tage, aber es funktionierte immerhin) ;-)

Die WD Green wurde nun NTFS formatiert und funktioniert wieder ohne Probleme...

Eine Filesystemüberprüfung via openpli UI hat folgendes ausgegeben:

/dev/sda1: UNEXPECTED INCONSISTENCY;
RUN fsck MANUALLY.
(i.e., without -a or -p options)

 
fsck wollte ich nun via SSH (putty) starten, der Befehl wird aber nicht gefunden / erkannt.
 
Unter Windows 8.1 mit CrystalDiskInfo wurden keine Fehler gefunden, Status "Gut", 35°
 
Inzwischen habe ich unter openpli smartmontools installiert und folgenden Output erhalten:
 

smartctl 5.42 2011-10-20 r3458 [mips-linux-3.17.3] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Caviar Green (Adv. Format)
Device Model:     WDC WD20EARS-00MVWB0
Serial Number:    WD-xxxxxxxxxxxxxxxxxx (hab ich hier geändert)
LU WWN Device Id: 5 0014ee 6ab720101
Firmware Version: 51.0AB51
User Capacity:    2,000,398,934,016 bytes [2.00 TB]
Sector Size:      512 bytes logical/physical
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   8
ATA Standard is:  Exact ATA specification draft version not indicated
Local Time is:    Tue Jul 14 22:58:16 2015 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x84) Offline data collection activity
                                        was suspended by an interrupting command from host.
                                        Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                (37200) seconds.
Offline data collection
capabilities:                    (0x7b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   2) minutes.
Extended self-test routine
recommended polling time:        ( 255) minutes.
Conveyance self-test routine
recommended polling time:        (   5) minutes.
SCT capabilities:              (0x3035) SCT Status supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   191   191   051    Pre-fail  Always       -       2256
  3 Spin_Up_Time            0x0027   171   167   021    Pre-fail  Always       -       6425
  4 Start_Stop_Count        0x0032   096   096   000    Old_age   Always       -       4278
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x002e   200   200   000    Old_age   Always       -       0
  9 Power_On_Hours          0x0032   069   069   000    Old_age   Always       -       22782
 10 Spin_Retry_Count        0x0032   100   100   000    Old_age   Always       -       0
 11 Calibration_Retry_Count 0x0032   100   100   000    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   099   099   000    Old_age   Always       -       1011
192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       244
193 Load_Cycle_Count        0x0032   183   183   000    Old_age   Always       -       52939
194 Temperature_Celsius     0x0022   115   088   000    Old_age   Always       -       35
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   200   001   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0030   200   200   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x0008   200   200   000    Old_age   Offline      -       0

SMART Error Log Version: 1
ATA Error Count: 133 (device log contains only the most recent five errors)
        CR = Command Register [HEX]
        FR = Features Register [HEX]
        SC = Sector Count Register [HEX]
        SN = Sector Number Register [HEX]
        CL = Cylinder Low Register [HEX]
        CH = Cylinder High Register [HEX]
        DH = Device/Head Register [HEX]
        DC = Device Command Register [HEX]
        ER = Error register [HEX]
        ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 133 occurred at disk power-on lifetime: 22778 hours (949 days + 2 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 08 08 26 6b e1  Error: UNC 8 sectors at LBA = 0x016b2608 = 23799304

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 08 08 26 6b e1 08      00:12:15.538  READ DMA
  ec 00 00 00 00 00 a0 08      00:12:15.534  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 08      00:12:15.534  SET FEATURES [Set transfer mode]

Error 132 occurred at disk power-on lifetime: 22778 hours (949 days + 2 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 08 08 26 6b e1  Error: UNC 8 sectors at LBA = 0x016b2608 = 23799304

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 08 08 26 6b e1 08      00:12:09.932  READ DMA
  c8 00 08 08 24 1d e1 08      00:12:09.916  READ DMA
  c8 00 08 08 0c 4e e1 08      00:12:09.896  READ DMA
  c8 00 08 08 20 1d e1 08      00:12:08.872  READ DMA
  c8 00 08 08 bc 17 e1 08      00:12:07.096  READ DMA

Error 131 occurred at disk power-on lifetime: 22585 hours (941 days + 1 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 08 08 2a 6b e1  Error: UNC 8 sectors at LBA = 0x016b2a08 = 23800328

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 08 08 2a 6b e1 08      07:03:14.723  READ DMA
  ec 00 00 00 00 00 a0 08      07:03:14.719  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 08      07:03:14.719  SET FEATURES [Set transfer mode]

Error 130 occurred at disk power-on lifetime: 22585 hours (941 days + 1 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 08 08 2a 6b e1  Error: UNC 8 sectors at LBA = 0x016b2a08 = 23800328

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 08 08 2a 6b e1 08      07:03:09.339  READ DMA
  ec 00 00 00 00 00 a0 08      07:03:09.300  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 08      07:03:09.300  SET FEATURES [Set transfer mode]

Error 129 occurred at disk power-on lifetime: 22585 hours (941 days + 1 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 08 08 2a 6b e1  Error: UNC 8 sectors at LBA = 0x016b2a08 = 23800328

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 08 08 2a 6b e1 08      07:03:06.619  READ DMA
  ec 00 00 00 00 00 a0 08      07:03:06.615  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 08      07:03:06.615  SET FEATURES [Set transfer mode]

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]


SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.