hjager2013

Member Since 25 Sep 2014
Offline Last Active 16 Apr 2015 15:35

Find content

Topics I've Started

UPNP Client ?

1 February 2015 - 18:10

In de woonkamer heb ik een Panasonic DMR HCT130EG staan voor de ontvangst van UPC kanalen (met CI+ module). Op mijn slaapkamer gebruik ik een VU Solo voor de vrije kanalen omdat daarin geen CI+ module werkt. Nou heeft de Panasonic de mogelijkheid om via UPNP te streamen. Ik heb dit ook werkend op mijn ipad, pc en ook op een oude ACRyan streamertje. Ik ben alleen op zoek naar iets om de panasonic via UPNP zichtbaar te krijgen op de VU.

Iemand die hier iets voor weet ? Kom helaas zelf niet echt verder.

Tivii S660 USB DVB-S tuner not working

5 October 2014 - 22:06

I have this problem posted earlier in the Dutch language section

Unfortunately there was no one who could help. Hopefully there is someone who can help here

On my dreambox I use an Tivii S660 USB DVB-S tuner for a while. To get this working, i only must install the Dw2102 driver.

Now i would like to use the usb tuner in the VU + Duo2. Here i have also installed the dw2102 driver. But the tuner is not working.

Does anyone know what I can do or what is going wrong?

=====

dmesg log

Duo2 LCD initialized 0

[LCD]: registered

[CI]: registered ci0 249

[CI]: registered ci1 248

[DFP]: registered dbox fp

[DFP]: Scart 9597 is found 0

[SC]: registered sci0

[SC]: registered sci1

system_time_set wakeup mode get

system_time_set wakeup mode get 0xc4

FP Update Driver Loaded

VFDController Update Driver Loaded

fpga update driver loaded

dvb-usb: found a 'TeVii S660 USB' in cold state, will try to load a firmware

dvb-usb: downloading firmware from file 'dvb-usb-s660.fw'

dw2102: start downloading DW210X firmware

usb 2-1: USB disconnect, device number 2

dvb-usb: found a 'TeVii S660 USB' in warm state.

dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.

DVB: registering new adapter (TeVii S660 USB)

dvb-usb: MAC address: 01:01:01:01:01:01

DVB: Unable to find symbol ds3000_attach()

dvb-usb: no frontend was attached by 'TeVii S660 USB'

dvb-usb: TeVii S660 USB successfully initialized and connected.

usbcore: registered new interface driver dw2102

dvb-usb: TeVii S660 USB successfully deinitialized and disconnected.

usb 4-1: reset high-speed USB device number 2 using ehci-brcm

phy0 -> rt2800_init_eeprom: Error - Invalid RT chipset detected.

phy0 -> rt2x00lib_probe_dev: Error - Failed to allocate device.

usbcore: registered new interface driver rt2800usb

rtusb init rt2870 --->

=== pAd = f8203000, size = 511144 ===

usbcore: registered new interface driver rt2870

[VID]: VIDEO_SET_STREAMTYPE 0

[VID]: VIDEO_SELECT_SOURCE 1

[VID]: VIDEO_PLAY 1 2 0

[VID]: VIDEO_CONTINUE 1 1

[VID]: VIDEO_CLEAR_BUFFER 1 1 0

[VID]: VIDEO_STOP 0 1

[VID]: VIDEO_SELECT_SOURCE 0

usb 2-1: new high-speed USB device number 3 using ehci-brcm

__clk_enable: network [1]

bcm7425_pm_network_enable 00

__clk_enable: enet [1]

bcm40nm_pm_genet_enable 00

usb 2-1: config 1 interface 0 altsetting 0 bulk endpoint 0x81 has invalid maxpac

ket 2

dvb-usb: found a 'TeVii S660 USB' in cold state, will try to load a firmware

eth0: Link up, 1000 Mbps Full Duplex

dvb-usb: downloading firmware from file 'dvb-usb-s660.fw'

dw2102: start downloading DW210X firmware

dvb-usb: found a 'TeVii S660 USB' in warm state.

dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.

DVB: registering new adapter (TeVii S660 USB)

NET: Registered protocol family 10

dvb-usb: MAC address: 00:18:bd:5b:c6:52

DVB: Unable to find symbol ds3000_attach()

dvb-usb: no frontend was attached by 'TeVii S660 USB'

dvb-usb: TeVii S660 USB successfully initialized and connected.

[VID]: VIDEO_SET_STREAMTYPE 0

[VID]: VIDEO_SELECT_SOURCE 1

[VID]: VIDEO_PLAY 1 2 0

[VID]: VIDEO_CONTINUE 1 1

[VID]: VIDEO_CLEAR_BUFFER 1 1 0

[VID]: VIDEO_STOP 0 1

[VID]: VIDEO_SELECT_SOURCE 0

[CI]: CI interface initialised

eth0: no IPv6 routers present

[AUD]: AUDIO_SET_MUTE 0

[AUD]: AUDIO_SET_MIXER -823788048

[AUD]: AUDIO_SET_MIXER : amixl 0, amixr 0

[AUD]: AUDIO_SET_MIXER : next left volume 0, right volume 0

[AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70

[AUD]: AUDIO_SET_MIXER -823788048

[AUD]: AUDIO_SET_MIXER : amixl 35, amixr 35

[AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70

[AUD]: AUDIO_SET_MIXER : next left volume -2570, right volume -2570

FE tune

[AUD]: AUDIO_SELECT_SOURCE 0

[AUD]: AUDIO_SET_BYPASS_MODE 1

[AUD]: downmix 0 state : 0

[AUD]: AUDIO_PAUSE 6482032

[AUD]: AUDIO_PLAY 6482032 decoder start : 0

[VID]: VIDEO_SELECT_SOURCE 0

[VID]: VIDEO_GET_SIZE src w: 1280 h:720 display w:1280 h:720

[VID]: VIDEO_GET_SIZE aspect: 1 6

[VID]: VIDEO_SET_STREAMTYPE 1

[VID]: VIDEO_FREEZE 6482032 0

[VID]: VIDEO_PLAY 6482032 5 2

[VID]: VIDEO_SLOWMOTION 0 1

[VID]: VIDEO_FAST_FORWARD 0 1

[VID]: VIDEO_CONTINUE 6482032 1

[AUD]: AUDIO_CONTINUE 6482032 1 aph=0xcec2b680

[AUD]: setting mute : 0

[AUD]: AUDIO_CHANNEL_SELECT 0

Tivii S660 USB niet zichtbaar met VU Duo2

25 September 2014 - 18:46

Hallo, hopelijk kan iemand mij helpen met onderstaand probleem.

Op mijn dreambox gebruik ik al een tijdje een Tivii S660 USB tuner voor dvb-s. Hiervoor heb ik alleen de dw2102 driver hoeven installeren.

Nu wil ik de usb tuner graag in de VU+ Duo2 gebruiken. Hier heb ik ook de dw2102 driver geinstalleerd maar wat ik ook probeer de tuner de tuner raakt niet zichtbaar in PLI.

Is er iemand die weet wat ik hieraan kan doen of wat er mis gaat ?

=====

dmesg log

Duo2 LCD initialized 0

[LCD]: registered

[CI]: registered ci0 249

[CI]: registered ci1 248

[DFP]: registered dbox fp

[DFP]: Scart 9597 is found 0

[SC]: registered sci0

[SC]: registered sci1

system_time_set wakeup mode get

system_time_set wakeup mode get 0xc4

FP Update Driver Loaded

VFDController Update Driver Loaded

fpga update driver loaded

dvb-usb: found a 'TeVii S660 USB' in cold state, will try to load a firmware

dvb-usb: downloading firmware from file 'dvb-usb-s660.fw'

dw2102: start downloading DW210X firmware

usb 2-1: USB disconnect, device number 2

dvb-usb: found a 'TeVii S660 USB' in warm state.

dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.

DVB: registering new adapter (TeVii S660 USB)

dvb-usb: MAC address: 01:01:01:01:01:01

DVB: Unable to find symbol ds3000_attach()

dvb-usb: no frontend was attached by 'TeVii S660 USB'

dvb-usb: TeVii S660 USB successfully initialized and connected.

usbcore: registered new interface driver dw2102

dvb-usb: TeVii S660 USB successfully deinitialized and disconnected.

usb 4-1: reset high-speed USB device number 2 using ehci-brcm

phy0 -> rt2800_init_eeprom: Error - Invalid RT chipset detected.

phy0 -> rt2x00lib_probe_dev: Error - Failed to allocate device.

usbcore: registered new interface driver rt2800usb

rtusb init rt2870 --->

=== pAd = f8203000, size = 511144 ===

usbcore: registered new interface driver rt2870

[VID]: VIDEO_SET_STREAMTYPE 0

[VID]: VIDEO_SELECT_SOURCE 1

[VID]: VIDEO_PLAY 1 2 0

[VID]: VIDEO_CONTINUE 1 1

[VID]: VIDEO_CLEAR_BUFFER 1 1 0

[VID]: VIDEO_STOP 0 1

[VID]: VIDEO_SELECT_SOURCE 0

usb 2-1: new high-speed USB device number 3 using ehci-brcm

__clk_enable: network [1]

bcm7425_pm_network_enable 00

__clk_enable: enet [1]

bcm40nm_pm_genet_enable 00

usb 2-1: config 1 interface 0 altsetting 0 bulk endpoint 0x81 has invalid maxpac

ket 2

dvb-usb: found a 'TeVii S660 USB' in cold state, will try to load a firmware

eth0: Link up, 1000 Mbps Full Duplex

dvb-usb: downloading firmware from file 'dvb-usb-s660.fw'

dw2102: start downloading DW210X firmware

dvb-usb: found a 'TeVii S660 USB' in warm state.

dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.

DVB: registering new adapter (TeVii S660 USB)

NET: Registered protocol family 10

dvb-usb: MAC address: 00:18:bd:5b:c6:52

DVB: Unable to find symbol ds3000_attach()

dvb-usb: no frontend was attached by 'TeVii S660 USB'

dvb-usb: TeVii S660 USB successfully initialized and connected.

[VID]: VIDEO_SET_STREAMTYPE 0

[VID]: VIDEO_SELECT_SOURCE 1

[VID]: VIDEO_PLAY 1 2 0

[VID]: VIDEO_CONTINUE 1 1

[VID]: VIDEO_CLEAR_BUFFER 1 1 0

[VID]: VIDEO_STOP 0 1

[VID]: VIDEO_SELECT_SOURCE 0

[CI]: CI interface initialised

eth0: no IPv6 routers present

[AUD]: AUDIO_SET_MUTE 0

[AUD]: AUDIO_SET_MIXER -823788048

[AUD]: AUDIO_SET_MIXER : amixl 0, amixr 0

[AUD]: AUDIO_SET_MIXER : next left volume 0, right volume 0

[AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70

[AUD]: AUDIO_SET_MIXER -823788048

[AUD]: AUDIO_SET_MIXER : amixl 35, amixr 35

[AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70

[AUD]: AUDIO_SET_MIXER : next left volume -2570, right volume -2570

FE tune

[AUD]: AUDIO_SELECT_SOURCE 0

[AUD]: AUDIO_SET_BYPASS_MODE 1

[AUD]: downmix 0 state : 0

[AUD]: AUDIO_PAUSE 6482032

[AUD]: AUDIO_PLAY 6482032 decoder start : 0

[VID]: VIDEO_SELECT_SOURCE 0

[VID]: VIDEO_GET_SIZE src w: 1280 h:720 display w:1280 h:720

[VID]: VIDEO_GET_SIZE aspect: 1 6

[VID]: VIDEO_SET_STREAMTYPE 1

[VID]: VIDEO_FREEZE 6482032 0

[VID]: VIDEO_PLAY 6482032 5 2

[VID]: VIDEO_SLOWMOTION 0 1

[VID]: VIDEO_FAST_FORWARD 0 1

[VID]: VIDEO_CONTINUE 6482032 1

[AUD]: AUDIO_CONTINUE 6482032 1 aph=0xcec2b680

[AUD]: setting mute : 0

[AUD]: AUDIO_CHANNEL_SELECT 0

ATTENTION !!!

hjager2013

Community Stats

Contact Information

User Tools

Friends

Latest Visitors

Topics I've Started

UPNP Client ?

Tivii S660 USB DVB-S tuner not working

Tivii S660 USB niet zichtbaar met VU Duo2