foxbob

I have a receiver gi et11000 4k.It doesn't have its own multiboot.I decided to try the one on Git.Homemade assembly.The plugin was installed the image was unpacked and after restarting the receiver the box doesn't start.I looked at the startup log via hyperterminal.There is an error there and my knowledge is not enough to fix it.

32 bit boot...
Booting Linux on physical CPU 0x0
Linux version 4.1.37 (oe-user@oe-host) (gcc version 14.2.0 (GCC) ) #1 SMP Sun Sep 1 06:18:58 UTC 2024
CPU: ARMv7 Processor [420f00f3] revision 3 (ARMv7), cr=30c5387d
CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
Machine model: ET1x000_EMMC_DDR3_NOAVS
moving dtb from 0x0000000007628000 to 0x0000000000965fbc
bmem: Reserved 700 MiB at 0x0000000014400000
cma: Reserved 16 MiB at 0x0000000012c00000
Forcing write-allocate cache policy for SMP
Memory policy: Data cache writealloc
PERCPU: Embedded 12 pages/cpu @d23ae000 s16396 r8192 d24564 u49152
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 261512
Kernel command line: root=/dev/mmcblk0p4 rootwait rw vmalloc=692m bmem=700m@324m
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 296816K/1048576K available (6725K kernel code, 288K rwdata, 2080K rodata, 296K init, 187K bss, 735376K reserved, 16384K cma-reserved, 8188K highmem)
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
    vmalloc : 0xd4000000 - 0xff000000   ( 688 MB)
    lowmem  : 0xc0000000 - 0xd3c00000   ( 316 MB)
    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
    modules : 0xbf000000 - 0xbfe00000   (  14 MB)
      .text : 0xc0008000 - 0xc08a19a0   (8807 kB)
      .init : 0xc08a2000 - 0xc08ec000   ( 296 kB)
      .data : 0xc08ec000 - 0xc09343e0   ( 289 kB)
       .bss : 0xc0937000 - 0xc0965fbc   ( 188 kB)
Hierarchical RCU implementation.
	RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
NR_IRQS:16 nr_irqs:16 16
irq_brcmstb_l2: registered L2 intc (mem: 0xd4002000, parent irq: 93)
irq_brcmstb_l2: registered L2 intc (mem: 0xd4008000, parent irq: 64)
irq_brcmstb_l2: registered L2 intc (mem: 0xd400a640, parent irq: 95)
irq_brcmstb_l2: registered L2 intc (mem: 0xd400c200, parent irq: 58)
irq_bcm7120_l2: registered BCM7120 L2 intc (mem: 0xfc40a700, parent IRQ(s): 2)
irq_bcm7120_l2: registered BCM7120 L2 intc (mem: 0xd400e380, parent IRQ(s): 3)
MCP: Enabling write pairing
Architected cp15 timer(s) running at 27.00MHz (virt).
clocksource arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x63a1e71a3, max_idle_ns: 440795203123 ns
sched_clock: 56 bits at 27MHz, resolution 37ns, wraps every 4398046511093ns
Switching to timer-based delay loop, resolution 37ns
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 54.00 BogoMIPS (lpj=27000)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
CPU0: update cpu_capacity 1024
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x8440 - 0x8498
CPU1: update cpu_capacity 1024
CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
Brought up 2 CPUs
SMP: Total of 2 processors activated (108.00 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
VFP support v0.3: implementor 42 architecture 4 part 00 variant 0 rev 0
clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
cpuidle: using governor ladder
cpuidle: using governor menu
hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 8 bytes.
Broadcom Brahma-B15 readahead cache at: 0xd410e478
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
media: Linux media interface: v0.10
Linux video capture interface: v2.00
Advanced Linux Sound Architecture Driver Initialized.
Bluetooth: Core ver 2.20
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Switched to clocksource arch_sys_counter
FS-Cache: Loaded
thermal thermal_zone0: failed to read out thermal zone (-22)
NET: Registered protocol family 2
TCP established hash table entries: 4096 (order: 2, 16384 bytes)
TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
CPU PMU: Failed to parse /pmu/interrupt-affinity[0]
hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available
futex hash table entries: 512 (order: 3, 32768 bytes)
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
fuse init (API version 7.23)
bounce: pool size: 64 pages
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
brcm-gisb-arb f0400000.gisb-arb: registered mem: d4134000, irqs: 261, 262
brcm-usb-phy f0470200.usb-phy: USB3.0 clock not found in Device Tree
brcmstb-sata-phy f0458100.sata_phy: registered 2 port(s)
brcm-pci f0460000.pcie: adjusting to legacy (broken) pcie DT
brcm-pci f0460000.pcie: cannot get msi intr; MSI disabled
brcm-pci f0460000.pcie: link down
brcm-waketimer f0417580.waketimer: rtc core: registered brcmstb-waketmr as rtc0
brcm-waketimer f0417580.waketimer: registered, with irq 263
Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
console [ttyS0] disabled
f040a900.serial: ttyS0 at MMIO 0xf040a900 (irq = 107, base_baud = 5062500) is a 16550A
console [ttyS0] enabled
of_serial: probe of f040a940.serial failed with error -28
of_serial: probe of f040a980.serial failed with error -28
[drm] Initialized drm 1.1.0 20060810
brd: module loaded
loop: module loaded
brcm-ahci f045a000.sata: masking port_map 0x3 -> 0x3
brcm-ahci f045a000.sata: SSS flag set, parallel bus scan disabled
brcm-ahci f045a000.sata: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl platform mode
brcm-ahci f045a000.sata: flags: 64bit ncq sntf stag pm clo pmp slum part 
scsi host0: brcm-ahci
scsi host1: brcm-ahci
ata1: SATA max UDMA/133 mmio [mem 0xf045a000-0xf045aa9b] port 0x100 irq 91
ata2: SATA max UDMA/133 mmio [mem 0xf045a000-0xf045aa9b] port 0x180 irq 91
brcm-ahci f045a000.sata: Broadcom AHCI SATA3 registered
brcmstb_qspi f03e3400.spi: using bspi-mspi mode
m25p80 spi32766.0: found mx25l6405d, expected m25p80
m25p80 spi32766.0: mx25l6405d (8192 Kbytes)
6 ofpart partitions found on MTD device spi32766.0
Creating 6 MTD partitions on "spi32766.0":
0x000000000000-0x000000200000 : "flash0.bolt"
0x000000200000-0x000000240000 : "flash0.macadr"
0x000000240000-0x000000280000 : "flash0.nvram"
0x000000280000-0x000000300000 : "flash0.devtree"
0x000000300000-0x000000800000 : "flash0.avail0"
0x000000000000-0x000000800000 : "flash0"
libphy: Fixed MDIO Bus: probed
bcmgenet f0b00000.ethernet: GENET 4.5 EPHY: 0x1001
bcmgenet f0b00000.ethernet: failed to get enet-mux clock
libphy: bcmgenet MII bus: probed
usbcore: registered new interface driver r8152
hso: /usr/src/debug/linux-etxx00/4.1.37/drivers/net/usb/hso.c: Option Wireless
ata1: SATA link down (SStatus 0 SControl 300)
usbcore: registered new interface driver hso
usbcore: registered new interface driver ipheth
xhci-brcm: xHCI BRCM driver
xhci-brcm f0471000.xhci_v2: xHCI Host Controller
xhci-brcm f0471000.xhci_v2: new USB bus registered, assigned bus number 1
xhci-brcm f0471000.xhci_v2: hcc params 0x0250f17d hci version 0x100 quirks 0x00010090
xhci-brcm f0471000.xhci_v2: irq 149, io mem 0xf0471000
hub 1-0:1.0: USB hub found
hub 1-0:1.0: config failed, hub doesn't have any ports! (err -19)
xhci-brcm f0471000.xhci_v2: xHCI Host Controller
xhci-brcm f0471000.xhci_v2: new USB bus registered, assigned bus number 2
usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-brcm: EHCI BRCM driver
ehci-brcm f0470300.ehci_v2: EHCI Host Controller
ehci-brcm f0470300.ehci_v2: new USB bus registered, assigned bus number 3
ehci-brcm f0470300.ehci_v2: irq 145, io mem 0xf0470300
ata2: SATA link down (SStatus 0 SControl 300)
ehci-brcm f0470300.ehci_v2: USB 2.0 started, EHCI 1.00
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
ehci-brcm f0470500.ehci_v2: EHCI Host Controller
ehci-brcm f0470500.ehci_v2: new USB bus registered, assigned bus number 4
ehci-brcm f0470500.ehci_v2: irq 146, io mem 0xf0470500
ehci-brcm f0470500.ehci_v2: USB 2.0 started, EHCI 1.00
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 1 port detected
ohci-brcm: OHCI BRCM driver
ohci-brcm f0470400.ohci_v2: BRCM OHCI controller
ohci-brcm f0470400.ohci_v2: new USB bus registered, assigned bus number 5
ohci-brcm f0470400.ohci_v2: irq 147, io mem 0xf0470400
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 1 port detected
ohci-brcm f0470600.ohci_v2: BRCM OHCI controller
ohci-brcm f0470600.ohci_v2: new USB bus registered, assigned bus number 6
ohci-brcm f0470600.ohci_v2: irq 148, io mem 0xf0470600
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 1 port detected
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
usbcore: registered new interface driver bcm5974
usbcore: registered new interface driver synaptics_usb
i2c /dev entries driver
brcmstb_thermal f04d1500.thermal: registered AVS TMON of-sensor driver
usbcore: registered new interface driver btusb
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
sdhci-brcmstb f03e0000.sdhci: No vmmc regulator found
sdhci-brcmstb f03e0000.sdhci: No vqmmc regulator found
mmc0: SDHCI controller on f03e0000.sdhci [f03e0000.sdhci] using ADMA
sdhci-brcmstb f03e0200.sdhci: No vmmc regulator found
sdhci-brcmstb f03e0200.sdhci: No vqmmc regulator found
mmc1: SDHCI controller on f03e0200.sdhci [f03e0200.sdhci] using ADMA
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
Initializing XFRM netlink socket
NET: Registered protocol family 17
NET: Registered protocol family 15
Key type dns_resolver registered
Registering SWP/SWPB emulation handler
brcm-waketimer f0417580.waketimer: setting system clock to 1970-01-01 00:00:04 UTC (4)
ALSA device list:
  No soundcards found.
Waiting for root device /dev/mmcblk0p4...
mmc1: MAN_BKOPS_EN bit is not set
mmc1: new high speed MMC card at address 0001
mmcblk0: mmc1:0001 4FPD3R 3.64 GiB 
mmcblk0boot0: mmc1:0001 4FPD3R partition 1 4.00 MiB
mmcblk0boot1: mmc1:0001 4FPD3R partition 2 4.00 MiB
mmcblk0rpmb: mmc1:0001 4FPD3R partition 3 512 KiB
 mmcblk0: p1 p2 p3 p4
EXT4-fs (mmcblk0p4): mounted filesystem with ordered data mode. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 179:4.
devtmpfs: mounted
Freeing unused kernel memory: 296K (c08a2000 - c08ec000)
usb 2-1: new SuperSpeed USB device number 2 using xhci-brcm
open-multiboot - debug: omb_utils_init_system            : mountusb-storage 2-1:1.0: USB Mass Storage device detected
 /proc
open-mulscsi host2: usb-storage 2-1:1.0
tiboot - debug: omb_utils_init_system            : mount /sys
open-multiboot - debug: omb_utils_init_system            : mount /media
open-multiboot - debug: omb_utils_init_system            : run volatile media
open-multiboot - debug: omb_utils_init_system            : run mdev
sh: line 1: /etc/init.d/mdev: No such file or directory
scsi 2:0:0:0: Direct-Access     JetFlash Transcend 8GB    1.00 PQ: 0 ANSI: 6
sd 2:0:0:0: Attached scsi generic sg0 type 0
sd 2:0:0:0: [sda] 15433728 512-byte logical blocks: (7.90 GB/7.36 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA
 sda: sda1
sd 2:0:0:0: [sda] Attached SCSI removable disk
open-multiboot - debug: omb_utils_find_and_mountEXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
         : check device /dev/sda1
open-multiboot - debug: omb_utils_find_and_mount         : found data on device /dev/sda1
open-multiboot - debug: omb_utils_get_images             : discover images
sh: line 1: /usr/lib/enigma2/python/Plugins/Extensions/OpenMultiboot/open-multiboot-menu-helper.py: No such file or directory
init: /usr/src/debug/json-c/0.17/json_object.c:1513: json_object_array_length: Assertion `json_object_get_type(jso) == json_type_array' failed.
Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000004

CPU1: stopping
CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.1.37 #1
Hardware name: Broadcom STB (Flattened Device Tree)
[<c001761c>] (unwind_backtrace) from [<c00135f4>] (show_stack+0x10/0x14)
[<c00135f4>] (show_stack) from [<c0665c90>] (dump_stack+0x7c/0x90)
[<c0665c90>] (dump_stack) from [<c00163b8>] (handle_IPI+0x154/0x188)
[<c00163b8>] (handle_IPI) from [<c00093cc>] (gic_handle_irq+0x5c/0x60)
[<c00093cc>] (gic_handle_irq) from [<c0014000>] (__irq_svc+0x40/0x54)
Exception stack(0xd1c89f80 to 0xd1c89fc8)
9f80: 00000001 00000000 00000000 c0021e20 00000000 00000001 00000000 d1c88000
9fa0: d1c89fd0 c08e8e88 c08ee4e8 c08e6324 00000000 d1c89fc8 c001111c c0011120
9fc0: 60080013 ffffffff
[<c0014000>] (__irq_svc) from [<c0011120>] (arch_cpu_idle+0x38/0x3c)
[<c0011120>] (arch_cpu_idle) from [<c0057dfc>] (cpu_startup_entry+0x248/0x2cc)
[<c0057dfc>] (cpu_startup_entry) from [<0000946c>] (0x946c)
---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000004

Also,after the reboot the box stopped loading.Not a single firmware is loaded.If the flash drive has firmware it offers to flash the receiver.For a very long time there is an inscription on the screen Updating rootfs and the inscription can be visible for about 1 hour.But the receiver still does not start.I made a start log via putty, but I can’t force start the firmware when I click on CTRL-C the log doesn't stop.

=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2024.02.01 19:24:03 =~=~=~=~=~=~=~=~=~=~=~=
 ю CPU 0123
BCM74450040
PRID74440040
v1.21
RR:00000003
BFW
seclib-1.9
BBL v1.0.1
AVS init...
AVS init OK
AVS load:select_image: addr_offset: 00051000 part_offset: 00000000 bootStatus: 2a002b00
AVS load_code offset =00051000
LOADED
AVS: overtemp mon ON

single board
select_image: addr_offset: 00055000 part_offset: 00000000 bootStatus: 3d2b2500
MEMSYS-ALT
SHMOO 02010100 BLD:exported HW:hpf0_b1p3 V:2.1.1.0
MCB: FLEX
AVS start:status=000000ff
STB: Current voltage=00000396(918)
 temperature=00009bf0(39920)
 PV=00000354(852)
 MV=00000397(919)
AVS FW rev=30333278 [0.3.2.x]
OK
DDR0: !@ ffe0e780 <= ffe0d9f4 MEMSYS-0 @ f1100000 OK
DDR1: =@ ffe0e780 <= ffe0d9f4 MEMSYS-1 @ f1180000 OK
DDR2: =@ ffe0e780 <= ffe0d9f4 MEMSYS-2 @ f1200000 OK
Sdram Scramble OTP = 0x00000001 
Sdram Scramble OK
select_image: addr_offset: 00020000 part_offset: 00000000 bootStatus: 1b25252b
BFW load mode OTP = 0x0000000f 
bfw_hash_locked = 0x00000000 
BFW key3 OK, BFW load OK
BFW v4.1.5
COPY CODE... DONE
MICH: disable success
SSBL
SEC: jtag debug status: 000000af
PINMUX
CACHE FLUSH OK
MMU ON
CACHE FLUSH OK
_fbss  07089dd8
_ebss  070c9538
_end   070c9558
HEAP @ 07100000
STACK @ 09200000
ARCH: CONFIG OK
CLR BSS 07089dd8 to 070c9538 OK
CLR SRAM  OK
CACHE FLUSH OK
CPU CLKSET OK
GO!

[33;1m    ,/   [0m 
[33;1m  ,'/___,[0m BOLT v1.21 v1.21 LOCAL BUILD
[33;1m.'__  ,' [0m (2016-10-17 16:21:51 Vuplus team)
[33;1m   /,'   [0m Copyright (C) 2016 Broadcom
[33;1m  /'     [0m 
[0m
Board: ULTIMO4K
SYS_CTRL: product=7444, family=7445e0, strap=000005b6, 
otp @ 0xf0404030 = 0x822000e0: en_cr(0x00000060) en_testport(0x00000080) macrovision_disable(0x02000000) moca_disable(0x80000000) rv9_disable(0x00200000) 
otp @ 0xf0404034 = 0x00000001: moca2_disable(0x00000001) 
CPU: 4x B15 [420f00f3] 1503 MHz
SCB: 432 MHz
DDR0 @ 1200MHz, DDR1 @ 1200MHz, DDR2 @ 1200MHz
RESET CAUSE: 0x000003 main_chip_input power_on (2 of 21 possible causes)
CS0: SFDP SPI, 4MB, 64kB blocks, 64kB erase block, 256B pages
[31;1mCS1: NAND: unrecognized ID: 0xffffff 0xffffffff[0m
RTS0: 0x1101004, 256 clients, ok
RTS1: 0x1181004, 256 clients, ok
RTS2: 0x1201004, 256 clients, ok
BOX MODE: 1
SPLASH: starting
SPLASH BMEM init @ 40000000
SPLASH BMEM init @ 80000000
SPLASH BMEM init @ c0000000
SPLASH: Old format file in flash. Use splash_create_flash_file to create newer format.
Loaded BMP: W=720 H=480
SPLASH: audio not present
AVS: park check
AVS: temperature monitoring enabled
AVS: STB: V=0.918V, T=+41.381C, PV=0.852V, MV=0.919V, FW=30333278 [0.3.2.x]
check_tuner_version
i2c_readsw
Tuner Version [0x2]
LCD_Init Complete
boot device name [flash0.bolt]
waiting for usb...
usb: resetting device on bus 4 hub 1 port 1[J


USB: New high speed device connected to bus 4 hub 1 port 1[J


usb: resetting device on bus 4 hub 2 port 1[J


USB: New high speed device connected to bus 4 hub 2 port 1[J

usb: no driver found for 0a5c:bd27

usb: resetting device on bus 4 hub 2 port 2[J


USB: New full speed device connected to bus 4 hub 2 port 2[J


USB: Lower speed devices not supported under high speed hub[J


usb: resetting device on bus 5 hub 1 port 1[J


USB: New high speed device connected to bus 5 hub 1 port 1[J

usb: found Mass-Storage Device 8564:1000

USBMASS: Unit 0 connected[J

done
checking usb
No Priority Usb
checking front key
readFrontKey 0 0
Check ignore.update file
Checking usbdisk0:/vuplus/ultimo4k/ignore.update......NO
Check force.update file
Checking usbdisk0:/vuplus/ultimo4k/force.update......NO
bolt update ...Checking usbdisk0:/vuplus/ultimo4k/bolt_auto.bin......NO
Checking usbdisk0:/vuplus/ultimo4k/rootfs.tar.bz2......YES
Checking usbdisk0:/vuplus/ultimo4k/splash_auto.bin......NO
Checking usbdisk0:/vuplus/ultimo4k/kernel_auto.bin......YES
Checking usbdisk0:/vuplus/ultimo4k/reboot.update......YES
waiting for update key
readFrontKey 0x0
readFrontKey 0x0
readFrontKey 0x0
Skipping USB Update
Loader:zimg Filesys:raw Dev:emmcflash0.kernel File: Options:root=/dev/mmcblk0p4 rootfstype=ext4 rootflags=data=journal rootwait rw coherent_pool=2M vmalloc=600m bmem=608m@416m bmem=416m@1632m bmem=699m@2357m
Reading 4205024 bytes from zImage...........
Starting program at 0x8000 (DTB @ 0x7628000)

32 bit direct boot...
Uncompressing Linux... done, booting the kernel.
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 3.14.28-1.12 (oe-user@oe-host) (gcc version 13.2.0 (GCC) ) #1 SMP Sun Jan 28 04:02:33 UTC 2024
[    0.000000] CPU: ARMv7 Processor [420f00f3] revision 3 (ARMv7), cr=30c7387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[    0.000000] Machine model: ULTIMO4K
[    0.000000] moving dtb from 0x0000000007628000 to 0x0000000000865248
[    0.000000] bmem: Reserved 630 MiB at 0x0000000018a00000
[    0.000000] bmem: Reserved 383 MiB at 0x0000000068100000
[    0.000000] bmem: Reserved 443 MiB at 0x00000000a4100000
[    0.000000] cma: Reserved 16 MiB at 0x0000000017000000
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] MCP: Enabling write pairing
[    0.000000] PERCPU: Embedded 8 pages/cpu @d81b0000 s8768 r8192 d15808 u32768
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 785660
[    0.000000] Kernel command line: root=/dev/mmcblk0p4 rootfstype=ext4 rootflags=data=journal rootwait rw coherent_pool=2M vmalloc=622m bmem=630m@394m bmem=383m@1665m bmem=443m@2625m
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 1600376K/3145728K available (5909K kernel code, 334K rwdata, 1872K rodata, 252K init, 189K bss, 1528968K reserved, 16384K cma-reserved, 1255412K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xd8800000 - 0xff000000   ( 616 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xd8200000   ( 386 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc07a17d0   (7782 kB)
[    0.000000]       .init : 0xc07a2000 - 0xc07e1240   ( 253 kB)
[    0.000000]       .data : 0xc07e2000 - 0xc0835b58   ( 335 kB)
[    0.000000]        .bss : 0xc0835b60 - 0xc0865248   ( 190 kB)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xfc403000, parent irq: 94)
[    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xfc3e1000, parent irq: 64)
[    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xfc410640, parent irq: 96)
[    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xfc4d1200, parent irq: 48)
[    0.000000] Architected cp15 timer(s) running at 27.00MHz (virt).
[    0.000004] sched_clock: 56 bits at 27MHz, resolution 37ns, wraps every 2545165795328ns
[    0.000009] Switching to timer-based delay loop
[    0.000275] Console: colour dummy device 80x30
[    0.000295] Calibrating delay loop (skipped), value calculated using timer frequency.. 54.00 BogoMIPS (lpj=27000)
[    0.000303] pid_max: default: 32768 minimum: 301
[    0.000401] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000406] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.005847] CPU: Testing write buffer coherency: ok
[    0.006057] CPU0: update cpu_power 1024
[    0.006063] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.006186] Setting up static identity map for 0x5a5480 - 0x5a54d8
[    0.008545] CPU1: Booted secondary processor
[    0.008561] CPU1: update cpu_power 1024
[    0.008564] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.009177] CPU2: Booted secondary processor
[    0.009188] CPU2: update cpu_power 1024
[    0.009191] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[    0.009776] CPU3: Booted secondary processor
[    0.009787] CPU3: update cpu_power 1024
[    0.009790] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[    0.009840] Brought up 4 CPUs
[    0.009857] SMP: Total of 4 processors activated.
[    0.009861] CPU: All CPU(s) started in SVC mode.
[    0.010214] devtmpfs: initialized
[    0.013829] VFP support v0.3: implementor 42 architecture 4 part 00 variant 0 rev 0
[    0.014819] regulator-dummy: no parameters
[    0.015004] NET: Registered protocol family 16
[    0.017105] DMA: preallocated 2048 KiB pool for atomic coherent allocations
[    0.017892] cpuidle: using governor ladder
[    0.017898] cpuidle: using governor menu
[    0.020969] irq: no irq domain found for /rdb/interrupt-controller@f040a780 !
[    0.021123] irq: no irq domain found for /rdb/interrupt-controller@f0417280 !
[    0.025025] irq: no irq domain found for /rdb/interrupt-controller@f03e1a00 !
[    0.025297] syscon f0404000.syscon: regmap [mem 0xf0404000-0xf040451b] registered
[    0.026057] syscon f0404100.syscon: regmap [mem 0xf0404100-0xf040415b] registered
[    0.026212] syscon f040415c.syscon: regmap [mem 0xf040415c-0xf040419b] registered
[    0.026356] syscon f0410700.syscon: regmap [mem 0xf0410700-0xf041070b] registered
[    0.026492] syscon f041070c.syscon: regmap [mem 0xf041070c-0xf0410713] registered
[    0.026643] syscon f1101004.syscon: regmap [mem 0xf1101004-0xf1101403] registered
[    0.026782] syscon f1181004.syscon: regmap [mem 0xf1181004-0xf1181403] registered
[    0.026932] syscon f1201004.syscon: regmap [mem 0xf1201004-0xf1201403] registered
[    0.027062] syscon f0404080.syscon: regmap [mem 0xf0404080-0xf0404083] registered
[    0.027205] syscon f04040a4.syscon: regmap [mem 0xf04040a4-0xf04040a7] registered
[    0.027339] syscon f03e0154.syscon: regmap [mem 0xf03e0154-0xf03e0157] registered
[    0.027481] syscon f03e0354.syscon: regmap [mem 0xf03e0354-0xf03e0357] registered
[    0.027617] syscon f03e0400.syscon: regmap [mem 0xf03e0400-0xf03e0403] registered
[    0.028245] irq: no irq domain found for /rdb/interrupt-controller@f0417280 !
[    0.028785] syscon f03e2400.syscon: regmap [mem 0xf03e2400-0xf03e27ff] registered
[    0.028934] syscon f0452000.syscon: regmap [mem 0xf0452000-0xf04520ff] registered
[    0.029236] No ATAGs?
[    0.029254] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.029260] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    0.029380] Broadcom Brahma-B15 readahead cache at: 0xfc3e2478
[    0.044479] bio: create slab <bio-0> at 0
[    0.045168] SCSI subsystem initialized
[    0.045852] usbcore: registered new interface driver usbfs
[    0.045936] usbcore: registered new interface driver hub
[    0.046033] usbcore: registered new device driver usb
[    0.046157] Linux video capture interface: v2.00
[    0.046362] pps_core: LinuxPPS API ver. 1 registered
[    0.046366] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.046421] PTP clock support registered
[    0.046965] Advanced Linux Sound Architecture Driver Initialized.
[    0.047684] cfg80211: Calling CRDA to update world regulatory domain
[    0.048097] brcm-pci f0460000.pcie: adjusting to legacy (broken) pcie DT
[    0.048285] brcm-pci f0490000.pcie: adjusting to legacy (broken) pcie DT
[    0.148584] brcm-pci f0460000.pcie: link down
[    0.248885] brcm-pci f0490000.pcie: link down
[    0.248934] Switched to clocksource arch_sys_counter
[    0.249110] FS-Cache: Loaded
[    0.257862] thermal thermal_zone0: failed to read out thermal zone 0
[    0.257974] NET: Registered protocol family 2
[    0.258347] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    0.258374] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[    0.258418] TCP: Hash tables configured (established 4096 bind 4096)
[    0.258483] TCP: reno registered
[    0.258490] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.258503] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.258622] NET: Registered protocol family 1
[    0.258804] RPC: Registered named UNIX socket transport module.
[    0.258808] RPC: Registered udp transport module.
[    0.258811] RPC: Registered tcp transport module.
[    0.258815] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.259038] hw perfevents: enabled with ARMv7 Cortex-A15 PMU driver, 7 counters available
[    0.260291] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.261007] bounce pool size: 64 pages
[    0.261653] NFS: Registering the id_resolver key type
[    0.261679] Key type id_resolver registered
[    0.261683] Key type id_legacy registered
[    0.261694] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.261698] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    0.261846] FS-Cache: Netfs 'cifs' registered for caching
[    0.261904] Key type cifs.spnego registered
[    0.262062] fuse init (API version 7.22)
[    0.262203] msgmni has been set to 705
[    0.262870] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.262876] io scheduler noop registered
[    0.262880] io scheduler deadline registered
[    0.262905] io scheduler cfq registered (default)
[    0.263130] brcm-gisb-arb f0400000.gisb-arb: registered mem: fc400000, irqs: 258, 259
[    0.293351] brcm-waketimer f0417580.waketimer: registered, with irq 260
[    0.293615] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.294978] f040ab00.serial: ttyS0 at MMIO 0xf040ab00 (irq = 107, base_baud = 5062500) is a 16550A
[    1.125022] console [ttyS0] enabled
[    1.128901] f040ab40.serial: ttyS1 at MMIO 0xf040ab40 (irq = 108, base_baud = 5062500) is a 16550A
[    1.138250] f040ab80.serial: ttyS2 at MMIO 0xf040ab80 (irq = 109, base_baud = 5062500) is a 16550A
[    1.150670] loop: module loaded
[    1.154419] ahci brcmstb-ahci.0: can't get clock
[    1.159132] ahci brcmstb-ahci.0: SSS flag set, parallel bus scan disabled
[    1.176949] ahci brcmstb-ahci.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl platform mode
[    1.185580] ahci brcmstb-ahci.0: flags: 64bit ncq sntf stag pm clo pmp slum part 
[    1.195201] scsi0 : ahci_platform
[    1.198845] scsi1 : ahci_platform
[    1.202397] ata1: SATA max UDMA/133 mmio [mem 0xf045a000-0xf045aa9b] port 0x100 irq 62
[    1.210331] ata2: SATA max UDMA/133 mmio [mem 0xf045a000-0xf045aa9b] port 0x180 irq 62
[    1.219482] spi_brcmstb f03e3400.spi: 1-lane output, 3-byte address
[    1.225862] spi_brcmstb f03e3400.spi: master is unqueued, this is deprecated
[    1.233184] m25p80 spi32766.0: found mx25l3255e, expected m25p80
[    1.239209] m25p80 spi32766.0: mx25l3255e (4096 Kbytes)
[    1.244469] 5 ofpart partitions found on MTD device spi32766.0
[    1.250314] Creating 5 MTD partitions on "spi32766.0":
[    1.255467] 0x000000000000-0x000000200000 : "flash0.bolt"
[    1.261552] 0x000000200000-0x000000210000 : "flash0.macadr"
[    1.267759] 0x000000210000-0x000000220000 : "flash0.nvram"
[    1.273882] 0x000000220000-0x000000230000 : "flash0.devtree"
[    1.280188] 0x000000000000-0x000000400000 : "flash0"
[    1.286847] libphy: Fixed MDIO Bus: probed
[    1.293303] libphy: unimac MII bus: probed
[    1.301652] unimac-mdio f0b403c0.mdio: Broadcom UniMAC MDIO bus at 0xfcb403c0
[    1.309589] brcm-systemport f04a0000.ethernet: Broadcom SYSTEMPORTv 1.00 at 0xfc4a0000 (irqs: 54, 55, TXQs: 32, RXQs: 1)
[    1.323164] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[    1.329015] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[    1.335454] xhci-brcm: xHCI BRCM driver
[    1.339377] xhci-brcm f0471000.xhci_v2: xHCI Host Controller
[    1.345194] xhci-brcm f0471000.xhci_v2: new USB bus registered, assigned bus number 1
[    1.353309] xhci-brcm f0471000.xhci_v2: irq 115, io mem 0xf0471000
[    1.360019] hub 1-0:1.0: USB hub found
[    1.363803] hub 1-0:1.0: config failed, hub doesn't have any ports! (err -19)
[    1.371067] xhci-brcm f0471000.xhci_v2: xHCI Host Controller
[    1.376871] xhci-brcm f0471000.xhci_v2: new USB bus registered, assigned bus number 2
[    1.385200] hub 2-0:1.0: USB hub found
[    1.388978] hub 2-0:1.0: 2 ports detected
[    1.393386] ehci-brcm: EHCI BRCM driver
[    1.397300] ehci-brcm f0470300.ehci_v2: EHCI Host Controller
[    1.403119] ehci-brcm f0470300.ehci_v2: new USB bus registered, assigned bus number 3
[    1.421075] ehci-brcm f0470300.ehci_v2: irq 111, io mem 0xf0470300
[    1.432941] ehci-brcm f0470300.ehci_v2: USB 2.0 started, EHCI 1.00
[    1.439601] hub 3-0:1.0: USB hub found
[    1.443379] hub 3-0:1.0: 1 port detected
[    1.447518] ehci-brcm f0470500.ehci_v2: EHCI Host Controller
[    1.453326] ehci-brcm f0470500.ehci_v2: new USB bus registered, assigned bus number 4
[    1.471273] ehci-brcm f0470500.ehci_v2: irq 112, io mem 0xf0470500
[    1.482940] ehci-brcm f0470500.ehci_v2: USB 2.0 started, EHCI 1.00
[    1.486952] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.487194] ata1.00: ATA-11: KINGSTON SUV400S37120G, 0C3J96R9, max UDMA/133
[    1.487198] ata1.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32)
[    1.487508] ata1.00: configured for UDMA/133
[    1.487718] scsi 0:0:0:0: Direct-Access     ATA      KINGSTON SUV400S 0C3J PQ: 0 ANSI: 5
[    1.488310] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[    1.488314] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    1.488489] sd 0:0:0:0: [sda] Write Protect is off
[    1.488548] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.548574] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.554017] hub 4-0:1.0: USB hub found
[    1.554359]  sda: sda1
[    1.555117] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.564787] hub 4-0:1.0: 1 port detected
[    1.568991] ehci-brcm f0480300.ehci_v2: EHCI Host Controller
[    1.574833] ehci-brcm f0480300.ehci_v2: new USB bus registered, assigned bus number 5
[    1.592817] ehci-brcm f0480300.ehci_v2: irq 117, io mem 0xf0480300
[    1.604940] ehci-brcm f0480300.ehci_v2: USB 2.0 started, EHCI 1.00
[    1.611617] hub 5-0:1.0: USB hub found
[    1.615393] hub 5-0:1.0: 1 port detected
[    1.619527] ehci-brcm f0480500.ehci_v2: EHCI Host Controller
[    1.625347] ehci-brcm f0480500.ehci_v2: new USB bus registered, assigned bus number 6
[    1.643296] ehci-brcm f0480500.ehci_v2: irq 118, io mem 0xf0480500
[    1.654939] ehci-brcm f0480500.ehci_v2: USB 2.0 started, EHCI 1.00
[    1.661617] hub 6-0:1.0: USB hub found
[    1.665396] hub 6-0:1.0: 1 port detected
[    1.669671] ohci-brcm: OHCI BRCM driver
[    1.673589] ohci-brcm f0470400.ohci_v2: BRCM OHCI controller
[    1.677944] ata2: SATA link down (SStatus 0 SControl 300)
[    1.684825] ohci-brcm f0470400.ohci_v2: new USB bus registered, assigned bus number 7
[    1.692714] ohci-brcm f0470400.ohci_v2: irq 113, io mem 0xf0470400
[    1.753423] hub 7-0:1.0: USB hub found
[    1.757202] hub 7-0:1.0: 1 port detected
[    1.761342] ohci-brcm f0470600.ohci_v2: BRCM OHCI controller
[    1.767163] ohci-brcm f0470600.ohci_v2: new USB bus registered, assigned bus number 8
[    1.775049] ohci-brcm f0470600.ohci_v2: irq 114, io mem 0xf0470600
[    1.836407] hub 8-0:1.0: USB hub found
[    1.840185] hub 8-0:1.0: 1 port detected
[    1.844322] ohci-brcm f0480400.ohci_v2: BRCM OHCI controller
[    1.850142] ohci-brcm f0480400.ohci_v2: new USB bus registered, assigned bus number 9
[    1.858022] ohci-brcm f0480400.ohci_v2: irq 119, io mem 0xf0480400
[    1.919402] hub 9-0:1.0: USB hub found
[    1.922957] usb 5-1: new high-speed USB device number 2 using ehci-brcm
[    1.929797] hub 9-0:1.0: 1 port detected
[    1.933945] ohci-brcm f0480600.ohci_v2: BRCM OHCI controller
[    1.939781] ohci-brcm f0480600.ohci_v2: new USB bus registered, assigned bus number 10
[    1.947750] ohci-brcm f0480600.ohci_v2: irq 120, io mem 0xf0480600
[    2.009418] hub 10-0:1.0: USB hub found
[    2.013285] hub 10-0:1.0: 1 port detected
[    2.017625] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.024174] ehci-pci: EHCI PCI platform driver
[    2.028712] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.034917] ohci-pci: OHCI PCI platform driver
[    2.039733] hub 5-1:1.0: USB hub found
[    2.043520] usbcore: registered new interface driver usb-storage
[    2.049571] hub 5-1:1.0: 4 ports detected
[    2.049717] mousedev: PS/2 mouse device common for all mice
[    2.050153] i2c /dev entries driver
[    2.050541] IR NEC protocol handler initialized
[    2.050544] IR RC5(x) protocol handler initialized
[    2.050545] IR RC6 protocol handler initialized
[    2.050547] IR JVC protocol handler initialized
[    2.050548] IR Sony protocol handler initialized
[    2.050551] IR RC5 (streamzap) protocol handler initialized
[    2.050552] IR SANYO protocol handler initialized
[    2.050554] IR MCE Keyboard/mouse protocol handler initialized
[    2.050907] brcmstb_thermal f04d1500.thermal: registered AVS TMON of-sensor driver
[    2.051133] cpufreq_cpu0: failed to get cpu0 regulator: -19
[    2.051397] sdhci: Secure Digital Host Controller Interface driver
[    2.051398] sdhci: Copyright(c) Pierre Ossman
[    2.051400] sdhci-pltfm: SDHCI platform and OF driver helper
[    2.052521] mmc0: no vqmmc regulator found
[    2.052525] mmc0: no vmmc regulator found
[    2.082938] mmc0: SDHCI controller on f03e0200.sdhci [f03e0200.sdhci] using ADMA
[    2.083231] hidraw: raw HID events driver (C) Jiri Kosina
[    2.087686] usbcore: registered new interface driver usbhid
[    2.087687] usbhid: USB HID core driver
[    2.150580] mmc0: BKOPS_EN bit is not set
[    2.156833] mmc0: new high speed MMC card at address 0001
[    2.158111] mmcblk0: mmc0:0001 4FPD3R 3.64 GiB 
[    2.158202] mmcblk0boot0: mmc0:0001 4FPD3R partition 1 4.00 MiB
[    2.158295] mmcblk0boot1: mmc0:0001 4FPD3R partition 2 4.00 MiB
[    2.158376] mmcblk0rpmb: mmc0:0001 4FPD3R partition 3 512 KiB
[    2.161801]  mmcblk0: p1 p2 p3 p4
[    2.164652]  mmcblk0boot1: unknown partition table
[    2.165349]  mmcblk0boot0: unknown partition table
[    2.205977] TCP: cubic registered
[    2.209326] NET: Registered protocol family 17
[    2.213948] Distributed Switch Architecture driver version 0.1
[    2.219855] sys0[0]: detected a Broadcom Starfighter 2 switch
[    2.225857] Starfighter 2 top: 4.00, core: 2.00 base: 0xfcb00000, IRQs: 56, 57
[    2.233250] libphy: dsa slave smi: probed
[    2.293937] f0b403c0.mdio:05: Broadcom BCM7445 PHY revision: 0x10, patch: 3
[    2.508043] usb 5-1.1: new high-speed USB device number 3 using ehci-brcm
[    2.528036] attached PHY at address 5 [Broadcom BCM7445]
[    2.533795] net eth0: PHY already attached
[    2.538086] Key type dns_resolver registered
[    2.542418] Registering SWP/SWPB emulation handler
[    2.547658] regulator-dummy: disabling
[    2.554625] ALSA device list:
[    2.557608]   No soundcards found.
[    2.561808] EXT4-fs: Warning: mounting with data=journal disables delayed allocation and O_DIRECT support!
[    2.675055] usb 5-1.2: new full-speed USB device number 4 using ehci-brcm
[    2.947980] usb 6-1: new high-speed USB device number 2 using ehci-brcm
[    3.069846] usb-storage 6-1:1.0: USB Mass Storage device detected
[    3.076253] scsi2 : usb-storage 6-1:1.0
[    3.151117] random: nonblocking pool is initialized
[    4.082636] scsi 2:0:0:0: Direct-Access     JetFlash Transcend 8GB    1.00 PQ: 0 ANSI: 6
[    4.091804] sd 2:0:0:0: Attached scsi generic sg1 type 0
[    4.092226] sd 2:0:0:0: [sdb] 15433728 512-byte logical blocks: (7.90 GB/7.35 GiB)
[    4.092593] sd 2:0:0:0: [sdb] Write Protect is off
[    4.092971] sd 2:0:0:0: [sdb] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA
[    4.121991]  sdb: sdb1 sdb2
[    4.126966] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[   13.535942] mmc0: Timeout waiting for hardware interrupt.
[   13.543353] ------------[ cut here ]------------
[   13.547987] WARNING: CPU: 0 PID: 0 at /usr/src/debug/linux-vuplus/3.14.28/drivers/mmc/host/sdhci.c:994 sdhci_send_command+0x798/0xf0c()
[   13.560171] Modules linked in:
[   13.563243] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.14.28-1.12 #1
[   13.569710] [<c0015f70>] (unwind_backtrace) from [<c0011e1c>] (show_stack+0x10/0x14)
[   13.577469] [<c0011e1c>] (show_stack) from [<c059cc54>] (dump_stack+0x6c/0x7c)
[   13.584705] [<c059cc54>] (dump_stack) from [<c059abc0>] (warn_slowpath_common+0x68/0x84)
[   13.592810] [<c059abc0>] (warn_slowpath_common) from [<c0022a7c>] (warn_slowpath_null+0x1c/0x24)
[   13.601608] [<c0022a7c>] (warn_slowpath_null) from [<c045eeb0>] (sdhci_send_command+0x798/0xf0c)
[   13.610408] [<c045eeb0>] (sdhci_send_command) from [<c0460cbc>] (sdhci_timeout_timer+0x74/0xb8)
[   13.619118] [<c0460cbc>] (sdhci_timeout_timer) from [<c002c9b4>] (call_timer_fn.isra.0+0x20/0x7c)
[   13.628003] [<c002c9b4>] (call_timer_fn.isra.0) from [<c002cb5c>] (run_timer_softirq+0x14c/0x218)
[   13.636885] [<c002cb5c>] (run_timer_softirq) from [<c0026e78>] (__do_softirq+0x10c/0x2a8)
[   13.645072] [<c0026e78>] (__do_softirq) from [<c00272a8>] (irq_exit+0xe0/0x118)
[   13.652390] [<c00272a8>] (irq_exit) from [<c000f7e0>] (handle_IRQ+0x44/0x90)
[   13.659448] [<c000f7e0>] (handle_IRQ) from [<c000858c>] (gic_handle_irq+0x2c/0x5c)
[   13.667029] [<c000858c>] (gic_handle_irq) from [<c0012840>] (__irq_svc+0x40/0x50)
[   13.674518] Exception stack(0xc07e3f58 to 0xc07e3fa0)
[   13.679575] 3f40:                                                       ffffffed 179d1000
[   13.687761] 3f60: c07eb3ec 00000000 c07e2000 c05a808c c0829de4 c07ea444 c06bc044 00000001
[   13.695947] 3f80: c07d5628 00000000 d81b0fe0 c07e3fa0 c000fb04 c000fafc 60000113 ffffffff
[   13.704135] [<c0012840>] (__irq_svc) from [<c000fafc>] (arch_cpu_idle+0x2c/0x38)
[   13.711542] [<c000fafc>] (arch_cpu_idle) from [<c005feac>] (cpu_startup_entry+0x74/0x138)
[   13.719733] [<c005feac>] (cpu_startup_entry) from [<c07a2bb8>] (start_kernel+0x40c/0x418)
[   13.727921] [<c07a2bb8>] (start_kernel) from [<00008084>] (0x8084)
[   13.734108] ---[ end trace 70c38a30b36c9d64 ]---
[   13.740836] mmcblk0: error -110 transferring data, sector 73536, nr 16, cmd response 0x0, card status 0x400d00
[   13.750862] end_request: I/O error, dev mmcblk0, sector 73536
[   13.756624] Buffer I/O error on device mmcblk0p4, logical block 232
[   13.762904] lost page write due to I/O error on mmcblk0p4
[   13.768322] end_request: I/O error, dev mmcblk0, sector 73544
[   13.774081] Buffer I/O error on device mmcblk0p4, logical block 233
[   13.780361] lost page write due to I/O error on mmcblk0p4
[   23.807947] mmc0: Timeout waiting for hardware interrupt.
[   23.815355] ------------[ cut here ]------------
[   23.819982] WARNING: CPU: 0 PID: 0 at /usr/src/debug/linux-vuplus/3.14.28/drivers/mmc/host/sdhci.c:994 sdhci_send_command+0x798/0xf0c()
[   23.832164] Modules linked in:
[   23.835235] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W    3.14.28-1.12 #1
[   23.842644] [<c0015f70>] (unwind_backtrace) from [<c0011e1c>] (show_stack+0x10/0x14)
[   23.850401] [<c0011e1c>] (show_stack) from [<c059cc54>] (dump_stack+0x6c/0x7c)
[   23.857634] [<c059cc54>] (dump_stack) from [<c059abc0>] (warn_slowpath_common+0x68/0x84)
[   23.865736] [<c059abc0>] (warn_slowpath_common) from [<c0022a7c>] (warn_slowpath_null+0x1c/0x24)
[   23.874534] [<c0022a7c>] (warn_slowpath_null) from [<c045eeb0>] (sdhci_send_command+0x798/0xf0c)
[   23.883332] [<c045eeb0>] (sdhci_send_command) from [<c0460cbc>] (sdhci_timeout_timer+0x74/0xb8)
[   23.892042] [<c0460cbc>] (sdhci_timeout_timer) from [<c002c9b4>] (call_timer_fn.isra.0+0x20/0x7c)
[   23.900925] [<c002c9b4>] (call_timer_fn.isra.0) from [<c002cb5c>] (run_timer_softirq+0x14c/0x218)
[   23.909807] [<c002cb5c>] (run_timer_softirq) from [<c0026e78>] (__do_softirq+0x10c/0x2a8)
[   23.917993] [<c0026e78>] (__do_softirq) from [<c00272a8>] (irq_exit+0xe0/0x118)
[   23.925311] [<c00272a8>] (irq_exit) from [<c000f7e0>] (handle_IRQ+0x44/0x90)
[   23.932369] [<c000f7e0>] (handle_IRQ) from [<c000858c>] (gic_handle_irq+0x2c/0x5c)
[   23.939948] [<c000858c>] (gic_handle_irq) from [<c0012840>] (__irq_svc+0x40/0x50)
[   23.947437] Exception stack(0xc07e3f58 to 0xc07e3fa0)
[   23.952493] 3f40:                                                       ffffffed 179d1000
[   23.960678] 3f60: c07eb3ec 00000000 c07e2000 c05a808c c0829de4 c07ea444 c06bc044 00000001
[   23.968864] 3f80: c07d5628 00000000 00000000 c07e3fa0 c000fb04 c000fafc 60000113 ffffffff
[   23.977052] [<c0012840>] (__irq_svc) from [<c000fafc>] (arch_cpu_idle+0x2c/0x38)
[   23.984458] [<c000fafc>] (arch_cpu_idle) from [<c005feac>] (cpu_startup_entry+0x74/0x138)
[   23.992645] [<c005feac>] (cpu_startup_entry) from [<c07a2bb8>] (start_kernel+0x40c/0x418)
[   24.000830] [<c07a2bb8>] (start_kernel) from [<00008084>] (0x8084)
[   24.007015] ---[ end trace 70c38a30b36c9d65 ]---
[   24.013728] mmcblk0: error -110 transferring data, sector 73672, nr 8, cmd response 0x0, card status 0x400d00
[   24.023661] end_request: I/O error, dev mmcblk0, sector 73672
[   24.029420] Buffer I/O error on device mmcblk0p4, logical block 249
[   24.035699] lost page write due to I/O error on mmcblk0p4
[   34.079953] mmc0: Timeout waiting for hardware interrupt.
[   34.087360] ------------[ cut here ]------------
[   34.091985] WARNING: CPU: 0 PID: 0 at /usr/src/debug/linux-vuplus/3.14.28/drivers/mmc/host/sdhci.c:994 sdhci_send_command+0x798/0xf0c()
[   34.104168] Modules linked in:
[   34.107237] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W    3.14.28-1.12 #1
[   34.114645] [<c0015f70>] (unwind_backtrace) from [<c0011e1c>] (show_stack+0x10/0x14)
[   34.122400] [<c0011e1c>] (show_stack) from [<c059cc54>] (dump_stack+0x6c/0x7c)
[   34.129632] [<c059cc54>] (dump_stack) from [<c059abc0>] (warn_slowpath_common+0x68/0x84)
[   34.137734] [<c059abc0>] (warn_slowpath_common) from [<c0022a7c>] (warn_slowpath_null+0x1c/0x24)
[   34.146532] [<c0022a7c>] (warn_slowpath_null) from [<c045eeb0>] (sdhci_send_command+0x798/0xf0c)
[   34.155329] [<c045eeb0>] (sdhci_send_command) from [<c0460cbc>] (sdhci_timeout_timer+0x74/0xb8)
[   34.164039] [<c0460cbc>] (sdhci_timeout_timer) from [<c002c9b4>] (call_timer_fn.isra.0+0x20/0x7c)
[   34.172921] [<c002c9b4>] (call_timer_fn.isra.0) from [<c002cb5c>] (run_timer_softirq+0x14c/0x218)
[   34.181803] [<c002cb5c>] (run_timer_softirq) from [<c0026e78>] (__do_softirq+0x10c/0x2a8)
[   34.189990] [<c0026e78>] (__do_softirq) from [<c00272a8>] (irq_exit+0xe0/0x118)
[   34.197307] [<c00272a8>] (irq_exit) from [<c000f7e0>] (handle_IRQ+0x44/0x90)
[   34.204365] [<c000f7e0>] (handle_IRQ) from [<c000858c>] (gic_handle_irq+0x2c/0x5c)
[   34.211943] [<c000858c>] (gic_handle_irq) from [<c0012840>] (__irq_svc+0x40/0x50)
[   34.219432] Exception stack(0xc07e3f58 to 0xc07e3fa0)
[   34.224487] 3f40:                                                       ffffffed 179d1000
[   34.232673] 3f60: c07eb3ec 00000000 c07e2000 c05a808c c0829de4 c07ea444 c06bc044 00000001
[   34.240858] 3f80: c07d5628 00000000 d81b0fe0 c07e3fa0 c000fb04 c000fafc 60000113 ffffffff
[   34.249046] [<c0012840>] (__irq_svc) from [<c000fafc>] (arch_cpu_idle+0x2c/0x38)
[   34.256452] [<c000fafc>] (arch_cpu_idle) from [<c005feac>] (cpu_startup_entry+0x74/0x138)
[   34.264639] [<c005feac>] (cpu_startup_entry) from [<c07a2bb8>] (start_kernel+0x40c/0x418)
[   34.272825] [<c07a2bb8>] (start_kernel) from [<00008084>] (0x8084)
[   34.279010] ---[ end trace 70c38a30b36c9d66 ]---
[   34.285718] mmcblk0: error -110 transferring data, sector 81952, nr 8, cmd response 0x0, card status 0x400d00
[   34.295655] end_request: I/O error, dev mmcblk0, sector 81952
[   34.301416] Buffer I/O error on device mmcblk0p4, logical block 1284
[   34.307783] lost page write due to I/O error on mmcblk0p4