#1
Geplaatst op 26 juli 2011 - 13:24
i have genuine dm500hd with latest pli 26.7
as loyal user of newenigma image, i have to say pli image rocks !!!!!
i have on request please :-
i cant see any hebrew sub/lang auto select in"auto language selection menu"
so i tried to add it manualy
config.autolanguage.subtitle_autoselect1=heb
but each time enigma reset it
could you please fix that ?
best regards
Re: Auto language #2
Geplaatst op 26 juli 2011 - 13:30
Telnet into the box, stop enigma using "init 4", then change your config file, then restart enigma using "init 3".
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Pro (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: Auto language #3
Geplaatst op 26 juli 2011 - 13:49
I can add that. So it works with "heb".. and the fullname is "hebrew"?i cant see any hebrew sub/lang auto select in"auto language selection menu"
Indeed a work-a-round for the time being could be init 4, then change the settings and then restart again enigma with init 3...
I did not add all languages from the iso list as the list gets too long doing this... so did start to use the languages that were already available in Enigma2...
It could take until thursday evening before I can commit the change... sorry for that.
You could also add hebrew to /usr/lib/enigma2/python/Components/UsageConfig.py if you are able to do this... (without the + marks ofcourse)
config.autolanguage = ConfigSubsection() subtitle_language_choices = [ ("---", "None"), ("ara", "Arabic"), ("eus baq", "Basque"), ("hrv", "Croatian"), ("ces cze", "Czech"), ("dan", "Danish"), ("dut ndl", "Dutch"), ("eng", "English"), ("est", "Estonian"), ("fin", "Finnish"), ("fra fre", "French"), ("deu ger", "German"), ("ell gre", "Greek"), + ("hew", "Hebrew"), ("hun", "Hungarian"), ("ita", "Italian"), ("lat", "Latvian"), ("lit", "Lithuanian"), ("ltz", "Letzeburgesch"), ("nob", "Norwegian"), ("pol", "Polish"), ("por", "Portuguese"), ("fas per", "Persian"), ("ron rum", "Romanian"), ("rus", "Russian"), ("srp", "Serbian"), ("slk slo", "Slovak"), ("slv", "Slovenian"), ("spa", "Spanish"), ("swe", "Swedish"), ("tur", "Turkish")] audio_language_choices=[ ("---", "None"), ("orj dos ory org esl qaa und", "Original"), ("ara", "Arabic"), ("eus baq", "Basque"), ("hrv", "Croatian"), ("ces cze", "Czech"), ("dan", "Danish"), ("dut ndl", "Dutch"), ("eng", "English"), ("est", "Estonian"), ("fin", "Finnish"), ("fra fre", "French"), ("deu ger", "German"), ("ell gre", "Greek"), + ("hew", "Hebrew"), ("hun", "Hungarian"), ("ita", "Italian"), ("lat", "Latvian"), ("lit", "Lithuanian"), ("ltz", "Letzeburgesch"), ("nob", "Norwegian"), ("pol", "Polish"), ("por", "Portuguese"), ("fas per", "Persian"), ("ron rum", "Romanian"), ("rus", "Russian"), ("srp", "Serbian"), ("slk slo", "Slovak"), ("slv", "Slovenian"), ("spa", "Spanish"), ("swe", "Swedish"), ("tur", "Turkish")] config.autolanguage.audio_autoselect1 = ConfigSelection(choices=audio_language_choices, default="---") config.autolanguage.audio_autoselect2 = ConfigSelection(choices=audio_language_choices, default="---")
Re: Auto language #4
Re: Auto language #5
Re: Auto language #6
Geplaatst op 26 juli 2011 - 18:46
For ORY etc. you can use "original" as a language.
("orj dos ory org esl qaa und", "Original")
Hello! Please add Bulgarian also! I would appretiate! Thanks!
Yes sure... as soon as I have time for it...
Re: Auto language #7
Re: Auto language #8
Geplaatst op 26 juli 2011 - 19:36
Re: Auto language #9
Re: Auto language #10
Re: Auto language #11
Re: Auto language #12
Re: Auto language #13
Geplaatst op 26 juli 2011 - 19:59
I can remember that I added it because I found some git check-in (I do not remember the file name but 99% it was .cpp). That check-in was just a case of optimisation in the audio selection related code, that optimisation removed the "case normalization" (to lowercase) of the language codes as according to the comment (in code or in check-in) the case conversion was not necessary as all there was supposed to be in lowercase.
Re: Auto language #14
Re: Auto language #15
Re: Auto language #16
Re: Auto language #17
Re: Auto language #18
Re: Auto language #19
Geplaatst op 27 juli 2011 - 09:01
Auto audio settings in concern:
Audio preference: Original/Polish/English/French
Subtitles preference: Polish/English/French/None
Prefer AC3: Yes
Prefer audio stream stored by service: Yes
Allow subtitles equals audio mask: 2,3,4
Allow\Prefer hearing impaired subtitles: No
Prefer DVB-graphical subtitles: Yes
Prefer subtitle stored by service: Yes
Every change to the UsageConfig.py described later in this post included the following two steps:
1.
Replacing the UsageConfig.py (terminal), removing the UsageConfig.pyo (terminal), restarting enigma2 (box remote), updating the auto audio (box remote), restarting enigma2 again (box remote, to be on safe side).
2.
Rescanning all tuners (DVS-2: 13E, 19.2E, DVT) with clean option set to yes. Rescanning is the only way I can check if the auto audio selection worked. The auto audio selection is triggered only when I select the service for the first time after scanning. I think it is due to "settings per service" are active and I like the way it works very much.
I checked with 2 channels (both not FTA unfortunately):
1. Canal+ Film HD
1:0:1:32DD:190:13E:820000:0:0:0
13E, 11278kHz V, SR: 27500, 8PSK, FEC 3/4
audio tracks: MPEG Polish (380d audio pid) AC3 ORY (381d)
subtitles: DVB Polish, TXT Polish, ...
expected auto behavior: AC3 ORY + DVB Polish
2. Ale Kino!
1:0:1:12C5:2E7C:13E:820000:0:0:0
13E, 10892kHz H, SR: 27500, DVB-S QPSK, FEC 3/4
audio tracks: MPEG Polish (96d), MPEG ORY (97d)
subtitles DVB Polish, TXT Polish
expected auto behavior: MPEG ORY + DVB Polish
Original UsageConfig.py file: MPEG Polish audio selected, no subtitles on both channels
UsageConfig.py with audio_language_choices table entry changed to
("orj dos ory org esl qaa und mis mul", "Original"), :
audio and subtitle selections the same as for original UsageConfig.py. That check was made only to confirm that adding "mis" and "mul" does not affect the test. I added the "mis" and "mul" because one of our DVB-T service providers uses them.
UsageConfig.py with audio_language_choices table entry changed to
("orj dos ory org esl qaa und mis mul ORY", "Original"), :
Canal+ Film HD: AC3 ORY + DVB Polish
Ale Kino!: MPEG ORY + DVB Polish
And this is how it should work with the original .py file.
So, adding ORY does make a change.
I did not checked the ENG and POL because it is not testable (or necessary) in the current service configuration. Uppercase POL and ENG comes together only and the POL audio pid is lower than the ENG audio pid. This results in that POL always comes before ENG, the way I need on most of the channels.
Re: Auto language #20
Also tagged with one or more of these keywords: DM500HD
Is het mogelijk de Oscam te updaten naar r11715 voor DM500HD ?Begonnen door Vaako, 10 apr 2023 DM500HD |
|
|||
2x drukken op knop OK is gelijk aan INFO knop, hoe instellen?Begonnen door Vaako, 21 apr 2020 DM500HD |
|
|||
OpenPli 4.0 feed nog online?Begonnen door mimisiku, 26 dec 2019 dm500hd |
|
|||
Discovery HD Showcase telkens een onderbreking in het geluidBegonnen door Vaako, 21 okt 2016 Discovery HD Showcase, DM500HD |
|
|||
Mount USB-stick op netwerkBegonnen door foxtrot, 19 okt 2015 usb, netwerk, mount, dm500hd |
|
1 gebruiker(s) lezen dit onderwerp
0 leden, 1 bezoekers, 0 anonieme gebruikers