14 replies to this topic
#1
Posted 24 March 2010 - 03:37
How to Add a Channel manual if i only know the freq?
how do i knw is added?
need step by step guide heheh
e.g. a tvn chn with 434 freq on channel 175 of my list.
before i come in i had did a bit research but still not very sure
i using DM500C and image was flash with a PLi menu..
how do i knw is added?
need step by step guide heheh
e.g. a tvn chn with 434 freq on channel 175 of my list.
before i come in i had did a bit research but still not very sure
i using DM500C and image was flash with a PLi menu..
Re: How to Add a Channel manual if i only know the freq #2
Re: How to Add a Channel manual if i only know the freq #3
Re: How to Add a Channel manual if i only know the freq #4
Posted 24 March 2010 - 05:38
well when you scan it will pickup all channels that are on that tp. so if you loose some preexisiting channels, that means those channels no longer exist. so is loosing them a problem ?
DM500, DM7000, DM800 Fortec Mercury II, sg2100, winegard 39", invacom qph-031 Toshiba TRX-2220 ku-linear
Re: How to Add a Channel manual if i only know the freq #5
Re: How to Add a Channel manual if i only know the freq #6
Posted 24 March 2010 - 20:13
I never used a cable DB (North America doesn't use the DVB-c standard besides in the Bahamas I believe), but guessing...
Save your channel list, scan the new channel, open the original & newly scanned services file and add the newly scanned channel's entry to the older service file / channel list, then reload it to the DB...
--
hemi
Save your channel list, scan the new channel, open the original & newly scanned services file and add the newly scanned channel's entry to the older service file / channel list, then reload it to the DB...
--
hemi
Re: How to Add a Channel manual if i only know the freq #7
Re: How to Add a Channel manual if i only know the freq #8
Re: How to Add a Channel manual if i only know the freq #9
Re: How to Add a Channel manual if i only know the freq #10
Re: How to Add a Channel manual if i only know the freq #11
Posted 8 April 2010 - 13:41
hi
all i need to following this page
http://www.pli-image...henksatsettings
in order to dl the system channel list?
all i need to following this page
http://www.pli-image...henksatsettings
in order to dl the system channel list?
Re: How to Add a Channel manual if i only know the freq #12
Re: How to Add a Channel manual if i only know the freq #13
Posted 13 April 2010 - 04:45
That page describes downloading channel settings from PLi's servers to your DB. IF they had a channel list for your cable service, it may work, but downloading some satellite's settings will do no good for cable reception.Most people probably use DreamboxEdit to make changes to their channel lists. By opening 2 instances of Dbedit, one containing the old mostly working channels, and the 2nd the newly scanned channels, you should be able to drag & drop channels between the 2 lists.
It is generally hard to truly break a DB unless one does foolish things like plugging/unplugging the coax while the box is turned on , etc... If you have DreamUP & a null-modem cable, if anything goes wrong you should be able to recover by reloading a new image 99.5% of the time. Try not to be too scared of messing something up.
--
hemi
It is generally hard to truly break a DB unless one does foolish things like plugging/unplugging the coax while the box is turned on , etc... If you have DreamUP & a null-modem cable, if anything goes wrong you should be able to recover by reloading a new image 99.5% of the time. Try not to be too scared of messing something up.
--
hemi
Re: How to Add a Channel manual if i only know the freq #14
Re: How to Add a Channel manual if i only know the freq #15
Also tagged with one or more of these keywords: DM500
Canal digitaal probleem met kaart heractivatieStarted by Lutz, 7 Jun 2014 dm500, et9000 |
|
|||
HDD problems DM500HD!Started by Elgreco, 4 Nov 2013 DM500, HDD |
|
|||
E1 build failsStarted by pr.malek, 16 Oct 2013 build, enigma1, dm500 |
|
|||
DM500 build CDK libtool errorStarted by xalanaseon, 14 Mar 2013 DM500, CDK, LIBTOOL, ACLOCAL.M4 |
|
|||
DM500 is not workingStarted by wonder4, 12 Mar 2013 dm500 |
|
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users