When I go to "transponder edit" I have nothing about frequencies.
In satellite configurations, I have all satellites
But in satfind and rotor setup I have nothing.
I delete some lines in the file sateliites.xml (var/etc) because I need space, but I only deleted the sateliites I could not tune.
what can I do?
birdo
dAF2000: thread moved
6 replies to this topic
Re: Transponders frequencies #2
Posted 18 April 2010 - 20:47
Please use the proper forum section. 3rd party development is for writing software etc. only.
Also, about which box are we talking?
Also, about which box are we talking?
Many answers to your question can be found in our wiki: http://openpli.org/wiki
Re: Transponders frequencies #3
Re: Transponders frequencies #4
Posted 18 April 2010 - 23:44
One guess would be you deleted a bit too much from the satellites.xml, perhaps one too many </sat>, or a </satellites>, or a... ?
Required elements:
<satellites> (Beginning tag for entire satellites.xml)
<sat name=Unique Sat identifier, flags. & position> (for each sat)
</sat> (closing tag for each sat name= entry)
</satellites> (closing tag for entire satellites.xml)
... plus all the ", <, /, >, etc for each TP entry
--
hemi
Ps. If you edited the file on a windows machine, M$ carriage returns ( ^M ) "may" be choking the DB, not sure myself as I've never done it on M$...
Required elements:
<satellites> (Beginning tag for entire satellites.xml)
<sat name=Unique Sat identifier, flags. & position> (for each sat)
</sat> (closing tag for each sat name= entry)
</satellites> (closing tag for entire satellites.xml)
... plus all the ", <, /, >, etc for each TP entry
--
hemi
Ps. If you edited the file on a windows machine, M$ carriage returns ( ^M ) "may" be choking the DB, not sure myself as I've never done it on M$...
Re: Transponders frequencies #5
Posted 19 April 2010 - 10:33
here is the begining of my satellites.xml
what is wrong?
""""""<?xml version="1.0" encoding="iso-8859-1"?>
<!-- useable flags are
1 -> Network Scan
2 -> use BAT
4 -> use ONIT
and combinations of this.-->
<satellites>
</sat>
<sat name="03 Intelsat (31.5)" flags="5" position="-315">
<transponder frequency="10963000" symbol_rate="5632000" polarization="1" fec_inner="0"/>
<transponder frequency="10972000" symbol_rate="5632000" polarization="1" fec_inner="0"/>
<transponder frequency="10981000" symbol_rate="5632000" polarization="1" fec_inner="0"/>
<transponder frequency="10990000" symbol_rate="5632000" polarization="1" fec_inner="0"/>
<transponder frequency="10999000" symbol_rate="5632000" polarization="1" fec_inner="0"/>
<transponder frequency="11016000" symbol_rate="5632000" polarization="1" fec_inner="0"/>
<transponder frequency="11024000" symbol_rate="5632000" polarization="1" fec_inner="0"/>
<transponder frequency="11037000" symbol_rate="5632000" polarization="1" fec_inner="0"/>
<transponder frequency="11060000" symbol_rate="30000000" polarization="0" fec_inner="3"/>
<transponder frequency="11108000" symbol_rate="5632000" polarization="1" fec_inner="0"/>
<transponder frequency="11465000" symbol_rate="7650000" polarization="1" fec_inner="3"/>
<transponder frequency="11493000" symbol_rate="8000000" polarization="1" fec_inner="4"/>
<transponder frequency="11504000" symbol_rate="1600000" polarization="1" fec_inner="3"/>
<transponder frequency="11512000" symbol_rate="1434000" polarization="1" fec_inner="0"/>
<transponder frequency="11569000" symbol_rate="2040000" polarization="1" fec_inner="3"/>
<transponder frequency="11618000" symbol_rate="30000000" polarization="0" fec_inner="3"/>
</sat>
<sat name="04 Hispasat (30.0W)" flags="0" position="-300">
<transponder frequency="11468000" symbol_rate="4500000" polarizatio"""""""
what is wrong?
""""""<?xml version="1.0" encoding="iso-8859-1"?>
<!-- useable flags are
1 -> Network Scan
2 -> use BAT
4 -> use ONIT
and combinations of this.-->
<satellites>
</sat>
<sat name="03 Intelsat (31.5)" flags="5" position="-315">
<transponder frequency="10963000" symbol_rate="5632000" polarization="1" fec_inner="0"/>
<transponder frequency="10972000" symbol_rate="5632000" polarization="1" fec_inner="0"/>
<transponder frequency="10981000" symbol_rate="5632000" polarization="1" fec_inner="0"/>
<transponder frequency="10990000" symbol_rate="5632000" polarization="1" fec_inner="0"/>
<transponder frequency="10999000" symbol_rate="5632000" polarization="1" fec_inner="0"/>
<transponder frequency="11016000" symbol_rate="5632000" polarization="1" fec_inner="0"/>
<transponder frequency="11024000" symbol_rate="5632000" polarization="1" fec_inner="0"/>
<transponder frequency="11037000" symbol_rate="5632000" polarization="1" fec_inner="0"/>
<transponder frequency="11060000" symbol_rate="30000000" polarization="0" fec_inner="3"/>
<transponder frequency="11108000" symbol_rate="5632000" polarization="1" fec_inner="0"/>
<transponder frequency="11465000" symbol_rate="7650000" polarization="1" fec_inner="3"/>
<transponder frequency="11493000" symbol_rate="8000000" polarization="1" fec_inner="4"/>
<transponder frequency="11504000" symbol_rate="1600000" polarization="1" fec_inner="3"/>
<transponder frequency="11512000" symbol_rate="1434000" polarization="1" fec_inner="0"/>
<transponder frequency="11569000" symbol_rate="2040000" polarization="1" fec_inner="3"/>
<transponder frequency="11618000" symbol_rate="30000000" polarization="0" fec_inner="3"/>
</sat>
<sat name="04 Hispasat (30.0W)" flags="0" position="-300">
<transponder frequency="11468000" symbol_rate="4500000" polarizatio"""""""
Re: Transponders frequencies #6
Posted 19 April 2010 - 16:59
Nothing appears obviously out of place with the format, at least in the beginning of the file...
Were the frequencies available in satfind, etc. before you edited the sat.xml?
Try installing a prepared channel list (should contain a working sat.xml) and see if the problem persists or frequencies are available.
--
hemi
Were the frequencies available in satfind, etc. before you edited the sat.xml?
Try installing a prepared channel list (should contain a working sat.xml) and see if the problem persists or frequencies are available.
--
hemi
Re: Transponders frequencies #7
Also tagged with one or more of these keywords: DM500
Canal digitaal probleem met kaart heractivatieStarted by Lutz, 7 Jun 2014 dm500, et9000 |
|
|||
HDD problems DM500HD!Started by Elgreco, 4 Nov 2013 DM500, HDD |
|
|||
E1 build failsStarted by pr.malek, 16 Oct 2013 build, enigma1, dm500 |
|
|||
DM500 build CDK libtool errorStarted by xalanaseon, 14 Mar 2013 DM500, CDK, LIBTOOL, ACLOCAL.M4 |
|
|||
DM500 is not workingStarted by wonder4, 12 Mar 2013 dm500 |
|
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users