#1
Posted 13 April 2011 - 05:28
It seems the programme schedule for Free-X TV is accurate. However, the EPG is listing programmes 2 hours earlier than they are actually being broadcast.
eg
a programme 'Explosions Part 5' was shown in my receiver's EPG as starting at 0300
but actually started at 0500.
Thanks,
Lee
UK
Re: Free-X TV EPG is early #2
Posted 13 April 2011 - 07:29
On the website the schedule is given in GMT time, and I did not taken this into account.
Fixed
Willy
~~Rytec Team~~
Maxytec Multibox SE OpenPli (used as mediaplayer)
Mutant HD2400 OpenPli
Vu+ Duo OpenPli (backup)
Synology NAS
Sat: 13E, 19.2E, 23.5E and 28.2E
*Pli/Rytec EPG POWERED*
Re: Free-X TV EPG is early #3
Posted 13 April 2011 - 17:55
The 2 hour error is still happening at the moment.
I assume the changes you made will not appear until tomorrow?
NB The channel references still need updating as per my post in the Adult Channels topic.
Lee
Re: Free-X TV EPG is early #4
Posted 14 April 2011 - 08:01
Normally corrections only take effect the next day.
Additions can take a bit longer as we have to edit the channels file as well.
Willy
~~Rytec Team~~
Maxytec Multibox SE OpenPli (used as mediaplayer)
Mutant HD2400 OpenPli
Vu+ Duo OpenPli (backup)
Synology NAS
Sat: 13E, 19.2E, 23.5E and 28.2E
*Pli/Rytec EPG POWERED*
Re: Free-X TV EPG is early #5
Posted 14 April 2011 - 18:45
A time shift now seems to have taken place. However, the schedule today seems wrong.
The bottom line seems to be, if you're using sat-erotic.de for listings, then that site is unreliable.
Again today, the listings for Free-X and X-Dream seem correct on:
http://www.inxworld.com/index_h.php
So, my suggestion is, if you can't use
http://www.inxworld.com/index_h.php
for Free-X and X-Dream, then stop providing EPG for those channels.
I hope this helps,
Lee
UK
Re: Free-X TV EPG is early #6
Posted 14 April 2011 - 21:53
I have contacted both inxworld and sat-erotik.de in an attempt to find out what is going on. Otherwise I / us will be forever going round in circles.
If I hear anything meaningful, I will post back.
In the meantime, neither site is preferable to the other.
I suspect the only answer will be to forget about supplying any EPG for these channels. Obviously, no EPG is better than a seemingly random one.
Lee
Re: Free-X TV EPG is early #7
Posted 14 April 2011 - 23:18
The guy operating sat-erotik.de has been very cooperative.
He confirms that his listings for
Free-X TV
and
X-Dream TV
are taken from inxworld.com
Some of his have not been matching theirs, but is making his listings match inxworld as we speak.
(although that in itself is no guarantee of accuracy)
So, sat-erotik.de or inxworld.com should be more or less as good or bad as each other for Free-X and X-Dream.
Please note that the timings on sat-erotik.de are GMT/UTC+1.
If I notice his time zone changes, I will let you (Rytec) know.
Lee
Re: Free-X TV EPG is early #8
Posted 15 April 2011 - 09:06
Willy
~~Rytec Team~~
Maxytec Multibox SE OpenPli (used as mediaplayer)
Mutant HD2400 OpenPli
Vu+ Duo OpenPli (backup)
Synology NAS
Sat: 13E, 19.2E, 23.5E and 28.2E
*Pli/Rytec EPG POWERED*
Re: Free-X TV EPG is early #9
Posted 15 April 2011 - 16:29
Yes, indeed.If the websites are not correct, then we have no chance of having a correct schedule.
Willy
To summarise for now;
Assume sat-erotik.de is correct for Free-X and X-Dream (and any other adult channels you may be sourcing there)
Just be aware/check that the listings on sat-erotik.de are GMT/UTC +1.
Rytec recently put in place my latest suggested ref changes for some adult channels.
New adult channels have started which may change many refs / sources again, which I will leave a week before investigating.
Lee
Also tagged with one or more of these keywords: Problem
Streamproxy transcoding problem on Vuplus Duo2 OpenPli 7.3Started by sherere, 24 Sep 2020 streamproxy, vuplus, transcode and 2 more... |
|
|||
VU+ Solo 2 problem after updating to 7.2Started by sarab_h, 7 Dec 2019 VU+ Solo 2, problem |
|
|||
Yet another problem, OscamStarted by Raybobo, 2 Feb 2019 problem, Oscam |
|
|||
tuner loop
Vu+ Solo2 tuner loop problem OpenPli 4Started by DimitarCC, 1 Nov 2016 tuner loop, openpli4, problem |
|
|||
onkyo tx-nr636 connectionStarted by maciejj48, 1 Oct 2016 problem |
|
2 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
-
Bing (1)