Re: SimpleUmount extension plugin #21
Posted 14 November 2011 - 21:27
just installed the latest version and restarted just in case but then i started looking for it everywhere....it didn`t show up with the blue like you mentioned cause i have everything mapped with "multiquickbutton" so i was confused for a bit....just wondering whether it`d be possible to have it show up under Setup /System / Harddisk....with the other options like:
-harddisk setup
-initialization
-filesystem check
-simpleunmount
Thx again!
Re: SimpleUmount extension plugin #22
Posted 14 November 2011 - 21:48
The same error in the plugin HddSleep.- completely rewritten mount point parsing code. A user (MiLo) report me crash.
Now I don't use anymore unrealiable 'os.popen' but much safer Console.ePopen() and read /proc/mounts file
http://openpli.org/f...post__p__221655
GigaBlue UHD Quad 4K /Lunix3-4K/Duo 4K
Re: SimpleUmount extension plugin #23
Posted 14 November 2011 - 22:06
The same error in the plugin HddSleep.
- completely rewritten mount point parsing code. A user (MiLo) report me crash.
Now I don't use anymore unrealiable 'os.popen' but much safer Console.ePopen() and read /proc/mounts file
http://openpli.org/f...post__p__221655
I've not understood.
Please, can you give me more details ?
Mass storage: internal SATA-II HDD 1TB WD10EACS GreenPower 5400rpm
Mass storage: external USB pen drive 2GB
Firmware: OpenPLi kernel 3.x.x
Tuner A: AVL2108 (DVB-S2) HotBird 13E
Tuner B: AVL2108 (DVB-S2) HotBird 13E
Tuner C: AverMedia A867 (DVB-T HD) (AF9035 + MXL5007T)
TV: plasma PANASONIC GT30 fullHD
Audio: PCM through HDMI (no Dolby decoder)
Re: SimpleUmount extension plugin #24
Posted 14 November 2011 - 22:07
Thx so much ambrosa for the very useful addition!!!
just installed the latest version and restarted just in case but then i started looking for it everywhere....it didn`t show up with the blue like you mentioned cause i have everything mapped with "multiquickbutton" so i was confused for a bit....just wondering whether it`d be possible to have it show up under Setup /System / Harddisk....with the other options like:
-harddisk setup
-initialization
-filesystem check
-simpleunmount
Thx again!
What is "multiquickbutton" ?
I've never used it...
Mass storage: internal SATA-II HDD 1TB WD10EACS GreenPower 5400rpm
Mass storage: external USB pen drive 2GB
Firmware: OpenPLi kernel 3.x.x
Tuner A: AVL2108 (DVB-S2) HotBird 13E
Tuner B: AVL2108 (DVB-S2) HotBird 13E
Tuner C: AverMedia A867 (DVB-T HD) (AF9035 + MXL5007T)
TV: plasma PANASONIC GT30 fullHD
Audio: PCM through HDMI (no Dolby decoder)
Re: SimpleUmount extension plugin #25
Posted 14 November 2011 - 22:21
Go here for more details:
https://github.com/E...iQuickButton-vu
Re: SimpleUmount extension plugin #26
Posted 15 November 2011 - 06:46
When you call the plug-mounted devices are not found.I've not understood.
Please, can you give me more details ?
HddSleep,plugin.py,line 269:
def getMount(self): os.system("mount | sort > %s" % (TEMP)) tmp = "" try: fd = open(TEMP, "r") if fd: for line in fd.readlines(): if line.find('/dev/sd') == 0: self.getDisks(line) p = line.find('type ') tmp += line[<img src='http://openpli.org/forums/public/style_emoticons/<#EMO_DIR#>/tongue.png' class='bbc_emoticon' alt=':P' />-1] + "\n" self["mounted"].setText("%s" % (tmp)) fd.close() os.system("rm %s" % (TEMP)) except Exception, e: print "[hddsleep] getMount FAIL:", eos.system("mount | sort > %s" % (TEMP))
At the command,list is = 0.
This occurs through a half-hour of E2.
Edited by Dima73, 15 November 2011 - 06:51.
GigaBlue UHD Quad 4K /Lunix3-4K/Duo 4K
Re: SimpleUmount extension plugin #27
Posted 15 November 2011 - 11:24
the plugin that allows the remapping of remote buttons...
Go here for more details:
https://github.com/E...iQuickButton-vu
Ok. So you have "remapped" remote control blu button to something else ?
In original mapping pressing BLUE button you get access to Enigma2 Extensions List, and there are many useful Extensions available/installable (ie. Cool Tv, Oscam control, .....)
With your BLUE remapping (bad idea in my opinion) the list is lost ... or not ?
Mass storage: internal SATA-II HDD 1TB WD10EACS GreenPower 5400rpm
Mass storage: external USB pen drive 2GB
Firmware: OpenPLi kernel 3.x.x
Tuner A: AVL2108 (DVB-S2) HotBird 13E
Tuner B: AVL2108 (DVB-S2) HotBird 13E
Tuner C: AverMedia A867 (DVB-T HD) (AF9035 + MXL5007T)
TV: plasma PANASONIC GT30 fullHD
Audio: PCM through HDMI (no Dolby decoder)
Re: SimpleUmount extension plugin #28
Posted 15 November 2011 - 11:30
When you call the plug-mounted devices are not found.
I've not understood.
Please, can you give me more details ?
HddSleep,plugin.py,line 269:def getMount(self): os.system("mount | sort > %s" % (TEMP)) tmp = "" try: fd = open(TEMP, "r") if fd: for line in fd.readlines(): if line.find('/dev/sd') == 0: self.getDisks(line) p = line.find('type ') tmp += line[<img src='http://openpli.org/forums/public/style_emoticons/<#EMO_DIR#>/tongue.png' class='bbc_emoticon' alt=':P' />-1] + "\n" self["mounted"].setText("%s" % (tmp)) fd.close() os.system("rm %s" % (TEMP)) except Exception, e: print "[hddsleep] getMount FAIL:", eos.system("mount | sort > %s" % (TEMP))
At the command,list is = 0.
This occurs through a half-hour of E2.
Accessing to system function using original Python os.system() or os.popen() (or else) can be problematic.
Sometime they works fine, sometimes not. It's totally unreliable under Enigma2.
For example my SimpleUmount plugin: many users are using it without any problem. MiLo says to me that in its system the plugin doesn't work correctly failing run os.popen() . Why ? I don't know.
So MiLo suggested me the correct way: Use in E2 plugins only Enigma2 Console.ePopen() function or parsing data directly from file (i.e. /proc/* , /sys/* ......): using simple Python open() looks to be safe.
Contach the author of HddSleep.py or try to change code yourself ......
Mass storage: internal SATA-II HDD 1TB WD10EACS GreenPower 5400rpm
Mass storage: external USB pen drive 2GB
Firmware: OpenPLi kernel 3.x.x
Tuner A: AVL2108 (DVB-S2) HotBird 13E
Tuner B: AVL2108 (DVB-S2) HotBird 13E
Tuner C: AverMedia A867 (DVB-T HD) (AF9035 + MXL5007T)
TV: plasma PANASONIC GT30 fullHD
Audio: PCM through HDMI (no Dolby decoder)
Re: SimpleUmount extension plugin #29
Posted 15 November 2011 - 11:59
I have this too is not working properly.Accessing to system function using original Python os.system() or os.popen() (or else) can be problematic.
Sometime they works fine, sometimes not. It's totally unreliable under Enigma2.
For example my SimpleUmount plugin: many users are using it without any problem. MiLo says to me that in its system the plugin doesn't work correctly failing run os.popen() . Why ? I don't know.
So MiLo suggested me the correct way: Use in E2 plugins only Enigma2 Console.ePopen() function or parsing data directly from file (i.e. /proc/* , /sys/* ......): using simple Python open() looks to be safe.
And in the various plug-ins.
I can not understand what it is connected.
GigaBlue UHD Quad 4K /Lunix3-4K/Duo 4K
Re: SimpleUmount extension plugin #30
Posted 15 November 2011 - 12:28
The "mount" command doesn't do anything else than just echoing what's in /proc/mounts. So instead of the needlessly complex routine with temporary files and multiple shell forks, you can simply do this:
for line in open('/proc/mounts','r'): items = line.split() if items[0].startswith('/dev/sd'): print "Found", items[1]
That's it. You don't have to close files (Python is not Java, so files are closed immediately).
If you want to delete a file, please don't use os.system('rm %s' % filename). This may fail in horribly unexpected ways (what happens if filename is "-rf /" or just "*" for some freaky reason?) and also starts a shell which parses that line of text to figure out it has to call the "rm" command which again parses the line. You're using about 2MB RAM memory for this now.
To delete a file, just use "os.unlink(filename)". Put a try/catch around it to prevent a greenscreen when the file can't be deleted.
Edited by MiLo, 15 November 2011 - 12:29.
Re: SimpleUmount extension plugin #31
Posted 15 November 2011 - 12:38
More or less it's the same code that I've used in my SimpleUmount 0.08
Mass storage: internal SATA-II HDD 1TB WD10EACS GreenPower 5400rpm
Mass storage: external USB pen drive 2GB
Firmware: OpenPLi kernel 3.x.x
Tuner A: AVL2108 (DVB-S2) HotBird 13E
Tuner B: AVL2108 (DVB-S2) HotBird 13E
Tuner C: AverMedia A867 (DVB-T HD) (AF9035 + MXL5007T)
TV: plasma PANASONIC GT30 fullHD
Audio: PCM through HDMI (no Dolby decoder)
Re: SimpleUmount extension plugin #32
Posted 15 November 2011 - 19:21
Yes the remapping still works if i need to change it, but i was hoping to have it show up under "Setup /System / Harddisk" like i mentioned, if i may; this is where i`d look first if i ever need to mount/unmount a device..i thought it`d be simpler.
Thx again.
Re: SimpleUmount extension plugin #33
Posted 17 November 2011 - 18:18
You can download it directly from you STB with:
opkg install enigma2-plugin-extensions-simpleumount
I've just upgraded it to rel. 0.09 but wait tomorrow to download it: it will be rebuild this night
Edited by ambrosa, 17 November 2011 - 18:18.
Mass storage: internal SATA-II HDD 1TB WD10EACS GreenPower 5400rpm
Mass storage: external USB pen drive 2GB
Firmware: OpenPLi kernel 3.x.x
Tuner A: AVL2108 (DVB-S2) HotBird 13E
Tuner B: AVL2108 (DVB-S2) HotBird 13E
Tuner C: AverMedia A867 (DVB-T HD) (AF9035 + MXL5007T)
TV: plasma PANASONIC GT30 fullHD
Audio: PCM through HDMI (no Dolby decoder)
Also tagged with one or more of these keywords: ENIGMA2
IPTV
M3U playlist handling pluginStarted by DimitarCC, 22 Aug 2024 IPTV, M3U, Enigma2 |
|
|||
m3u/xml?Started by MatthijsNL, 18 Dec 2020 ENIGMA2 |
|
|||
Looking for a good explanation of calculate, calibrate and allocate in positioner setup menuStarted by jeandubois, 19 Nov 2019 enigma2 |
|
|||
Bestand beschermen tegen overschrijven bij software updateStarted by mimisiku, 23 Feb 2019 Enigma2 |
|
|||
plugin extensions epgimport rytec not visibleStarted by arkovda, 19 Aug 2018 enigma2, plugin extension and 2 more... |
|
8 user(s) are reading this topic
0 members, 8 guests, 0 anonymous users