Jump to content


Photo

Openpli update troubles topic

Started by amigo, 11 Dec 2009 09:18
Algemeen

  • Please log in to reply
3101 replies to this topic

Re: Openpli update troubles topic #1781 mika-nl

  • Senior Member
  • 454 posts

+10
Neutral

Posted 14 November 2012 - 20:07

Kreeg vanmiddag een mail of ik mijn kritiek niet op een bepaalde manier wilde uiten.
Maar goed afzeiken vanuit het pli team mag wel schijnbaar.


Ik vind wel dat je negatief doet.. Je kan toch gewoon je problemen melden met logs van enigma enzo.
En tot die tijd een oudere versie gebruiken ? als je er echt niet mee kan leven.
Las ook wat over je skin problemen maar als ik kijk welke skins ik kan downl moet die ene skin die jij niet mooi vind geen probleem zijn.

Dit is niet negatief naar je toe, maar misschien een oplossing zodat je hier niet zo boos hoef tedoen.
Als je in file staat is dat ook overmacht kost je vaak ook minimaal 15 min en dan word je toch ook niet boos.
In 15 min kan je ook flashen.

MiKa

Re: Openpli update troubles topic #1782 SIMBAke

  • Senior Member
  • 261 posts

0
Neutral

Posted 17 November 2012 - 19:37

mijn 8000 reboot altijd automatisch nu , vandaag al een keer of 6 , denk zowat ieder uur
laatste upgrade ; 16-11-2012

DM8000 OpenPLi 3.0 . DM7000 PLi jade3 (werkloos) GIGABLUE quad HD

Re: Openpli update troubles topic #1783 Loui (PD1LOI)

  • Senior Member
  • 4,601 posts

+146
Excellent

Posted 18 November 2012 - 20:15

Ik heb vandaag een update gedaan en nu gaan alle webstreams op groen dus een crashlog


<?xml version="1.0" encoding="utf-8"?>
<openpli>
    <enigma2>
	    <crashdate>zo nov 18 20:12:09 2012</crashdate>
	    <compiledate>Nov 18 2012</compiledate>
	    <contactemail>forum at www.openpli.org</contactemail>
	    <!-- Please email this crashlog to above address -->
	    <skin>PD1LOI-Full-HD/skin.xml</skin>
	    <sourcedate>2012-11-17</sourcedate>
	    <branch>(no branch)</branch>
	    <rev>d6c6231</rev>
	    <version>3.0.0</version>
    </enigma2>
    <image>
	    <stbmodel>dm8000</stbmodel>
	    <kernelversion>
		    <![CDATA[
Linux dm8000 3.2-dm8000 #1 SMP Tue Oct 16 04:38:44 CEST 2012 mips GNU/Linux
]]>
	    </kernelversion>
	    <kernelcmdline>root=/dev/mtdblock3 rootfstype=jffs2 rw console=null quiet bmem=102M@154M</kernelcmdline>
	    <nimsockets>NIM Socket 0:</nimsockets>
	    <imageversion>
		    <!-- No such file or directory -->
	    </imageversion>
	    <imageissue>
		    <![CDATA[
openpli 3.0 %h
]]>
	    </imageissue>
    </image>
    <crashlogs>
	    <enigma2crashlog>
		    <![CDATA[
urites.radio 1042
0 entries in Bouquet userbouquet.favourites.radio
loading bouquet... /etc/enigma2/userbouquet.streamlinksnederland_radioRegionaal.radio 1042
can't open /etc/enigma2/userbouquet.streamlinksnederland_radioRegionaal.radio: No such file or directory
25 entries in Bouquet bouquets.radio
[FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Regular)
[FONT] adding font /usr/share/fonts/andale.ttf...OK (Fixed)
[FONT] adding font /usr/share/fonts/tuxtxt.ttf...OK (Console)
[FONT] adding font /usr/share/fonts/ae_AlMateen.ttf...OK (Replacement)
[FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Regular)
[FONT] adding font /usr/share/fonts/hdi.ttf...OK (Crs)
[FONT] adding font /usr/share/fonts/lcd.ttf...OK (LCD)
[FONT] adding font /usr/share/fonts/tuxtxt.ttf...OK (Console)
[FONT] adding font /usr/share/fonts/andale.ttf...OK (Fixed)
[FONT] adding font /usr/share/fonts/prive3.ttf...OK (prive3)
[FONT] adding font /usr/share/fonts/prive3.ttf...OK (prive4)
[FONT] adding font /usr/share/fonts/valis_enigma.ttf...OK (Subs)
[FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (FdLcD)
[FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (FdLcD)
[FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Regular)
Unknown device type: dreambox front panel
Activating keymap: Default (US)
[ePopen] command: loadkmap < /usr/share/keymaps/default.kmap
Activating language Nederlands
--> setting scaler_sharpness to: 0000000D
couldn't open /proc/stb/misc/12V_output
[ePopen] command: ip -o addr show dev eth0
[ePopen] command: ip -o addr show dev wlan0
setLCDBrightness 25
setLCDBrightness 255
[Picon] adding path: /media/cf/picon/
Plugin  Extensions/WeatherPlugin failed to load: No module named WeatherPlugin.plugin
Plugin probably removed, but not cleanly in /usr/lib/enigma2/python/Plugins/Extensions/WeatherPlugin
Plugin  Extensions/WebInterface failed to load: No module named plugin
Plugin probably removed, but not cleanly in /usr/lib/enigma2/python/Plugins/Extensions/WebInterface
[MyTube] MyTubePlayerService - init
[MerlinEPGCenter] fallback to default translation for single line style
[MerlinEPGCenter] fallback to default translation for with short description
[MerlinEPGCenter] fallback to default translation for simple
[MerlinEPGCenter] fallback to default translation for gradient
[MerlinEPGCenter] fallback to default translation for four parts
[SkinFinder] found skin file /usr/lib/enigma2/python/Plugins/Extensions/MerlinEPGCenter/skins/HD_border.xml
[MerlinEPGCenter] fallback to default translation for More than just an EPG...
[dFlash] Dreambox: !dm8000!
[dFlash] /tmp/dflash.sh created
getModeList for port DVI-PC
getModeList for port YPbPr
getModeList for port Scart
getModeList for port DVI-PC
getModeList for port DVI
hotplug on dvi
-> setting aspect, policy, policy2, wss 16:9 bestfit bestfit auto
-> setting aspect, policy, policy2, wss 16:9 bestfit bestfit auto
-> setting aspect, policy, policy2, wss 16:9 bestfit bestfit auto
-> setting aspect, policy, policy2, wss 16:9 bestfit bestfit auto
setMode - port: DVI mode: 1080i rate: multi
-> setting aspect, policy, policy2, wss 16:9 bestfit bestfit auto
[Ipkg] Added to OPKG destinations: /media/hdd
[Ipkg] Added to OPKG destinations: /media/cf
[EPGCacheSelector] fallback to default translation for Adjust your EPG Cache settings
[NetworkBrowser] fallback to default translation for Mount again
[NetworkBrowser] fallback to default translation for Attempt to mount shares again
starting hotplug handler
[CI_Assignment] activating ci configs:
[CI_Activate] FOUND 4 CI Slots
[CI_Activate_Config_CI0] no config file found
[CI_Activate_Config_CI0] error parsing xml...
[CI_Activate_Config_CI1] no config file found
[CI_Activate_Config_CI1] error parsing xml...
[CI_Activate_Config_CI2] no config file found
[CI_Activate_Config_CI2] error parsing xml...
[CI_Activate_Config_CI3] no config file found
[CI_Activate_Config_CI3] error parsing xml...
[FanControl2] Starting up
[FanControl2] ATA(WDC WD1600AAJS-0) /dev/sda Mode:auto
[FanControl2] HDD Temperature not readable
[FanControl2] HDD supports Temp reading without Spinup
[FanControl2] Generic(USB CF Reader) /dev/sdc Mode:auto
[FanControl2] HDD Temperature not readable
[FanControl2] HDD not supports Temp reading without Spinup -> Disabled
[FanControl2] HDD Temp 0C
[FanControl2] HDD Temp 0C
[SKIN] Parsing embedded skin <embedded-in-'FanControl2'>
[dFlash] autostart
[SKIN] Parsing embedded skin <embedded-in-'ResolutionLabel'>
port changed to DVI
mode changed to 1080i
getModeList for port DVI
default ('1080i', 'default')
preferedmodes ['720p', '576p', '480p', '576i', '480i', ('1080i', 'default')]
[EPGC] setCacheFile read/write epg data from/to '/media/cf/epg.dat'
[EPGC] time updated.. start EPG Mainloop
[ePNG] couldn't open /usr/share/enigma2/ico_dvb_s-fs8.png
[ePNG] couldn't open /usr/share/enigma2/ico_dvb_c-fs8.png
[ePNG] couldn't open /usr/share/enigma2/ico_dvb_t-fs8.png
[ePNG] couldn't open /usr/share/enigma2/ico_service_group-fs8.png
[SKIN] No skin to read...
warning, skin is missing element From in <class 'Screens.Dish.Dish'>
warning, skin is missing element Goto in <class 'Screens.Dish.Dish'>
warning, skin is missing element posGoto in <class 'Screens.Dish.Dish'>
warning, skin is missing element posFrom in <class 'Screens.Dish.Dish'>
warning, skin is missing element turnTime in <class 'Screens.Dish.Dish'>
RemovePopup, id = ZapError
setValue 50
Setvolume: 100 100 (raw)
Setvolume: 0 0 (-1db)
Setvolume: 50 50 (raw)
Setvolume: 32 32 (-1db)
playing 1:0:19:1B6C:C88:3:EB0000:0:0:0:
[EPGC] 58135 events read from /media/cf/epg.dat
not pauseable.
RemovePopup, id = ZapError
allocate channel.. 0c88:0003
opening frontend 0
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 1 Freq 11856000 Pol 1 SR 27500000 INV 2 FEC 4 orbpos 235 system 1 modulation 1 pilot 2, rolloff 0
tuning to 1256 mhz
OURSTATE: tuning
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:19:1B6C:C88:3:EB0000:0:0:0:
allocate demux
child has terminated
pipes closed
child has terminated
pipes closed
[ePopen] command: route -n | grep  eth0
poll: unhandled POLLERR/HUP/NVAL for fd 36(17)
child has terminated
pipes closed
[ePopen] command: route -n | grep  wlan0
child has terminated
pipes closed
poll: unhandled POLLERR/HUP/NVAL for fd 42(16)
poll: unhandled POLLERR/HUP/NVAL for fd 43(16)
poll: unhandled POLLERR/HUP/NVAL for fd 46(16)
[SEC] set static current limiting
set sequence pos 3
set sequence pos 4
[SEC] setVoltage 1
[SEC] sleep 200ms
child has terminated
pipes closed
0.0.0.0
192.168
poll: unhandled POLLERR/HUP/NVAL for fd 40(16)
[SEC] invalidate current switch params
[SEC] sendDiseqc: e00000(DiSEqC reset)
child has terminated
pipes closed
nameservers: [[192, 168, 178, 1]]
read configured interface: {'lo': {'dhcp': False}, 'wlan0': {'dhcp': True}, 'eth0': {'dhcp': True}}
self.ifaces after loading: {'wlan0': {'preup': False, 'predown': False, 'ip': [0, 0, 0, 0], 'up': False, 'mac': '00:23:cd:14:a9:4d', 'dhcp': True, 'netmask': [0, 0, 0, 0], 'gateway': [0, 0, 0, 0]}, 'eth0': {'preup': False, 'predown': False, 'ip': [192, 168, 178, 20], 'up': True, 'mac': '00:09:34:1c:82:34', 'dhcp': True, 'bcast': [192, 168, 178, 255], 'netmask': [255, 255, 255, 0], 'gateway': [192, 168, 178, 1]}}
[OpenWebif] loading external plugins...
[OpenWebif] no plugins to load
[OpenWebif] started on 80
poll: unhandled POLLERR/HUP/NVAL for fd 45(16)
[SEC] sleep 50ms
[SEC] sendDiseqc: e00003(DiSEqC peripherial power on)
[SEC] sleep 150ms
[SEC] sendDiseqc: e01038f9(?)
[SEC] sleep 50ms
set sequence pos 3
[SEC] setTone 1
[SEC] sleep 10ms
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
[SEC] sleep 500ms
(0)fe event: status 1, inversion off, m_tuning 2
(0)fe event: status 1f, inversion off, m_tuning 3
OURSTATE: ok
[eDVBLocalTimerHandler] channel 0x24caee0 running
[eEPGCache] channel 0x24caee0 running
[EPGC] next update in 2 sec
stop release channel timer
ok ... now we start!!
eventNewProgramInfo 0 0
have 1 video stream(s) (0202), and 1 audio stream(s) (0054), and the pcr pid is 0202, and the text pid is 0022
allocate demux
decoder state: play, vpid=514, apid=84
DMX_SET_PES_FILTER(0x202) - pcr - ok
DEMUX_START - pcr - ok
DMX_SET_PES_FILTER(0x54) - audio - ok
DEMUX_START - audio - ok
AUDIO_SET_BYPASS(0) - ok
AUDIO_PAUSE - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 1 - ok
DMX_SET_PES_FILTER(0x202) - video - ok
DEMUX_START - video - ok
VIDEO_FREEZE - ok
VIDEO_PLAY - ok
DMX_SET_PES_FILTER(0x22) - ttx - ok
DEMUX_START - ttx - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
AUDIO_CONTINUE - ok
AUDIO_CHANNEL_SELECT(0) - ok
disable teletext subtitles
not pauseable.
[AutoRes] service changed
[eDVBCAService] new service 1:0:19:1B6C:C88:3:EB0000:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:19:1B6C:C88:3:EB0000:0:0:0:
VIDEO_GET_EVENT - ok
[AutoRes] got event evVideoSizeChanged
VIDEO_GET_EVENT - ok
[AutoRes] got event evVideoProgressiveChanged
PATready
use pmtpid 09d8 for service_id 1b6c
eventNewProgramInfo 0 0
have 1 video stream(s) (0202), and 1 audio stream(s) (0054), and the pcr pid is 0202, and the text pid is 0022
decoder state: play, vpid=514, apid=84
[eDVBCIInterfaces] gotPMT
[SEC] set dynamic current limiting
[OpenWebif] page '/cgi-bin/xmessage?caption=mgcamd&timeout=5&body=+Decode+using+newcamd+%0a+host+cs2gbox.hopto.org+%0a+port+14711+sysid+0' not found
sdt update done!
[AutoRes] determineContent
VIDEO_GET_EVENT - ok
[AutoRes] got event evVideoSizeChanged
[AutoRes] determineContent
[EPGC] start caching events(1353265517)
[eDVBLocalTimerHandler] diff is 0
[eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
[eDVBLocalTimerHandler] not changed
VIDEO_GET_EVENT - ok
[AutoRes] got event evVideoProgressiveChanged
[AutoRes] determineContent
[FanControl2] Fan Reset
[FanControl2] Vlt:255 Pwm:255 Fan:4pin   - BoxOn HDDon
[FanControl2] actueelRPM:1770 doelRPM:3614 Temp:41.5
[EPGC] abort non avail schedule other reading
[EPGC] abort non avail netmed schedule reading
[EPGC] abort non avail netmed schedule other reading
[EPGC] abort non avail FreeSat schedule_other reading
[EPGC] abort non avail viasat reading
[EPGC] abort non avail mhw reading
[FanControl2] Vlt:255 Pwm:255 Fan:4pin   - BoxOn HDDon
[FanControl2] actueelRPM:1740 doelRPM:3614 Temp:41.5
[EPGC] nownext finished(1353265532)
[FanControl2] Vlt:255 Pwm:255 Fan:4pin   - BoxOn HDDon
[FanControl2] actueelRPM:1740 doelRPM:3614 Temp:41.5
[FanControl2] Vlt:255 Pwm:255 Fan:4pin   - BoxOn HDDon
[FanControl2] actueelRPM:1740 doelRPM:3614 Temp:41.5
[FanControl2] Vlt:255 Pwm:255 Fan:4pin   - BoxOn HDDon
[FanControl2] actueelRPM:1740 doelRPM:3955 Temp:42.0
[FanControl2] Vlt:255 Pwm:255 Fan:4pin   - BoxOn HDDon
[FanControl2] actueelRPM:1740 doelRPM:3614 Temp:41.5
[FanControl2] Vlt:255 Pwm:255 Fan:4pin   - BoxOn HDDon
[FanControl2] actueelRPM:1740 doelRPM:3614 Temp:41.5
[FanControl2] Vlt:255 Pwm:255 Fan:4pin   - BoxOn HDDon
[FanControl2] actueelRPM:1740 doelRPM:3614 Temp:41.5
[FanControl2] Vlt:255 Pwm:255 Fan:4pin   - BoxOn HDDon
[FanControl2] actueelRPM:1740 doelRPM:3955 Temp:42.0
[FanControl2] Vlt:255 Pwm:255 Fan:4pin   - BoxOn HDDon
[FanControl2] actueelRPM:1740 doelRPM:3955 Temp:42.0
[EPGC] schedule finished(1353265614)
[EPGC] stop caching events(1353265614)
[EPGC] next update in 60 min
[FanControl2] Vlt:255 Pwm:255 Fan:4pin   - BoxOn HDDon
[FanControl2] actueelRPM:1740 doelRPM:3614 Temp:41.5
[FanControl2] Vlt:255 Pwm:255 Fan:4pin   - BoxOn HDDon
[FanControl2] actueelRPM:1740 doelRPM:3614 Temp:41.5
[FanControl2] Vlt:255 Pwm:255 Fan:4pin   - BoxOn HDDon
[FanControl2] actueelRPM:1740 doelRPM:3955 Temp:42.0
[FanControl2] Vlt:255 Pwm:255 Fan:4pin   - BoxOn HDDon
[FanControl2] actueelRPM:1770 doelRPM:3614 Temp:41.5
[FanControl2] Vlt:255 Pwm:255 Fan:4pin   - BoxOn HDDon
[FanControl2] actueelRPM:1770 doelRPM:3614 Temp:41.5
[FanControl2] Vlt:255 Pwm:255 Fan:4pin   - BoxOn HDDon
[FanControl2] actueelRPM:1740 doelRPM:3614 Temp:41.5
[FanControl2] Vlt:255 Pwm:255 Fan:4pin   - BoxOn HDDon
[FanControl2] actueelRPM:1740 doelRPM:3614 Temp:41.5
[FanControl2] Vlt:255 Pwm:255 Fan:4pin   - BoxOn HDDon
[FanControl2] actueelRPM:1770 doelRPM:3614 Temp:41.5
[FanControl2] Vlt:255 Pwm:255 Fan:4pin   - BoxOn HDDon
[FanControl2] actueelRPM:1740 doelRPM:3955 Temp:42.0
[FanControl2] Vlt:255 Pwm:255 Fan:4pin   - BoxOn HDDon
[FanControl2] actueelRPM:1770 doelRPM:3955 Temp:42.0
[FanControl2] Vlt:255 Pwm:255 Fan:4pin   - BoxOn HDDon
[FanControl2] actueelRPM:1770 doelRPM:3614 Temp:41.5
[FanControl2] Vlt:255 Pwm:255 Fan:4pin   - BoxOn HDDon
[FanControl2] actueelRPM:1740 doelRPM:3955 Temp:42.0
[FanControl2] Vlt:255 Pwm:255 Fan:4pin   - BoxOn HDDon
[FanControl2] actueelRPM:1770 doelRPM:3614 Temp:41.5
[FanControl2] Vlt:255 Pwm:255 Fan:4pin   - BoxOn HDDon
[FanControl2] actueelRPM:1740 doelRPM:3955 Temp:42.0
[FanControl2] Vlt:255 Pwm:255 Fan:4pin   - BoxOn HDDon
[FanControl2] actueelRPM:1740 doelRPM:3955 Temp:42.0
[FanControl2] Vlt:255 Pwm:255 Fan:4pin   - BoxOn HDDon
[FanControl2] actueelRPM:1740 doelRPM:3955 Temp:42.0
[FanControl2] Vlt:255 Pwm:255 Fan:4pin   - BoxOn HDDon
[FanControl2] actueelRPM:1770 doelRPM:3955 Temp:42.0
[FanControl2] Vlt:255 Pwm:255 Fan:4pin   - BoxOn HDDon
[FanControl2] actueelRPM:1770 doelRPM:3955 Temp:42.0
[FanControl2] HDD Temp 0C
[FanControl2] Vlt:255 Pwm:255 Fan:4pin   - BoxOn HDDon
[FanControl2] actueelRPM:1770 doelRPM:3955 Temp:42.0
[FanControl2] Vlt:255 Pwm:255 Fan:4pin   - BoxOn HDDon
[FanControl2] actueelRPM:1770 doelRPM:4295 Temp:42.5
[FanControl2] Vlt:255 Pwm:255 Fan:4pin   - BoxOn HDDon
[FanControl2] actueelRPM:1770 doelRPM:4295 Temp:42.5
[FanControl2] Vlt:255 Pwm:255 Fan:4pin   - BoxOn HDDon
[FanControl2] actueelRPM:1740 doelRPM:4295 Temp:42.5
[FanControl2] Vlt:255 Pwm:255 Fan:4pin   - BoxOn HDDon
[FanControl2] actueelRPM:1740 doelRPM:4295 Temp:42.5
[FanControl2] Vlt:255 Pwm:255 Fan:4pin   - BoxOn HDDon
[FanControl2] actueelRPM:1770 doelRPM:4295 Temp:42.5
[FanControl2] Vlt:255 Pwm:255 Fan:4pin   - BoxOn HDDon
[FanControl2] actueelRPM:1770 doelRPM:4295 Temp:42.5
[FanControl2] Vlt:255 Pwm:255 Fan:4pin   - BoxOn HDDon
[FanControl2] actueelRPM:1770 doelRPM:4295 Temp:42.5
[FanControl2] Vlt:255 Pwm:255 Fan:4pin   - BoxOn HDDon
[FanControl2] actueelRPM:1770 doelRPM:4295 Temp:42.5
[FanControl2] Vlt:255 Pwm:255 Fan:4pin   - BoxOn HDDon
[FanControl2] actueelRPM:1740 doelRPM:4295 Temp:42.5
[FanControl2] Vlt:255 Pwm:255 Fan:4pin   - BoxOn HDDon
[FanControl2] actueelRPM:1740 doelRPM:4295 Temp:42.5
action ->  InfobarChannelSelection historyBack
[FanControl2] Vlt:255 Pwm:255 Fan:4pin   - BoxOn HDDon
[FanControl2] actueelRPM:1770 doelRPM:4295 Temp:42.5
action ->  InfobarChannelSelection historyBack
action ->  InfobarChannelSelection openServiceList
[FanControl2] Vlt:255 Pwm:255 Fan:4pin   - BoxOn HDDon
[FanControl2] actueelRPM:1770 doelRPM:4295 Temp:42.5
action ->  OkCancelActions ok
playing 4097:0:0:0:0:0:0:0:0:0:rtmp%3a//edge03.streamgate.nl/live/omroepflevoland/mp4%3alivestream1.mp4:Omroep Flevoland
[eDVBCAService] free slot 0 demux 0 for service 1:0:19:1B6C:C88:3:EB0000:0:0:0:
[eDVBCAService] free service 1:0:19:1B6C:C88:3:EB0000:0:0:0:
decoder state: play, vpid=-1, apid=-1
DEMUX_STOP - pcr - ok
DEMUX_STOP - video - ok
VIDEO_STOP - ok
AUDIO_STOP - ok
DEMUX_STOP - audio - ok
AUDIO_CONTINUE - ok
DEMUX_STOP - ttx - ok
start release channel timer
eServiceMP3::construct!
eServiceMP3::playbin uri=rtmp://edge03.streamgate.nl/live/omroepflevoland/mp4:livestream1.mp4
eServiceMP3::starting pipeline
PC: 7768a438
00000000 00000001 00000001 00c42d10
00000005 7771c000 00000000 00000000
76cdc974 00000000 81010100 3a3a3a3a
00000008 76696c3a 72747365 7f8772b8
024d5d80 00000000 732e6960 025188c8
73428000 7342b91c 73428000 00000000
00001102 76bf2380 00000010 00000000
7774db10 7f877bc0 73433a54 732ba0a4
As a final action, i will try to dump a bit of code.
I just hope that this won't crash.
7768a438: 28 00 24 8e 09 f8 20 03 21 28 40 02 ee ff 40 10 10 00 bc 8f 04 00 10 8e f7 ff 00 16 24 00 bf 8f (end)
-------
getResolvedKey config.plugins.crashlogautosubmit.sendAnonCrashlog failed !! (Typo??)
getResolvedKey config.plugins.crashlogautosubmit.addNetwork failed !! (Typo??)
getResolvedKey config.plugins.crashlogautosubmit.addWlan failed !! (Typo??)
]]>
	    </enigma2crashlog>
    </crashlogs>
</openpli>

Edited by Henksat, 18 November 2012 - 21:59.
Log in codeveld gezet.

Re: Openpli update troubles topic #1784 dylantje

  • Senior Member
  • 2,406 posts

+19
Neutral

Posted 19 November 2012 - 08:38

box update waarschuwt voor bad image.. [ et9000 ]
Op de site geen doodskoppen..?

Mut@nt HD51 with PLi 7.2 release - Cccam, PLi HD skin, HDD-1,5TB, USB DVB-T,4GB usb backupsuite. AB: harmony smartcontrol 

XTrend ET6500 with PLi 7.2 release - PLi HD skin, Stream remote, 2GB usb backupsuite. AB: Harmony 650 , 1x zgemma h2h with Cccam.

Met een USB Dvb-T Triax 78cm, 2x ALPS quatro LNB /19,2 en 23,5, SAB GSO-multiswitch: 4 sat. in 12 out. 

 

Re: Openpli update troubles topic #1785 littlesat

  • PLi® Core member
  • 57,119 posts

+698
Excellent

Posted 19 November 2012 - 10:47

Ik had gisteren doodshoofded aangezet... maar iemand anders heeft ze weer uitgezet..

Wel vreemd dat er nu pas klachten komen terwijl het image van vrijdag is???

WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W

Re: Openpli update troubles topic #1786 pieterg

  • PLi® Core member
  • 32,766 posts

+245
Excellent

Posted 19 November 2012 - 11:04

ik denk dat ze wel aan staan, maar dat je ze niet ziet.
(zelfde reden dat je ook geen images ziet van na de 16e, terwijl ze er wel staan)

Re: Openpli update troubles topic #1787 Loui (PD1LOI)

  • Senior Member
  • 4,601 posts

+146
Excellent

Posted 19 November 2012 - 15:17

Ik heb vandaag een update gedaan en nu gaan alle webstreams op groen dus een crashlog


<?xml version="1.0" encoding="utf-8"?>
<openpli>
	<enigma2>
		<crashdate>zo nov 18 20:12:09 2012</crashdate>
		<compiledate>Nov 18 2012</compiledate>
		<contactemail>forum at www.openpli.org</contactemail>
		<!-- Please email this crashlog to above address -->
		<skin>PD1LOI-Full-HD/skin.xml</skin>
		<sourcedate>2012-11-17</sourcedate>
		<branch>(no branch)</branch>
		<rev>d6c6231</rev>
		<version>3.0.0</version>
	</enigma2>
	<image>
		<stbmodel>dm8000</stbmodel>
		<kernelversion>
			<![CDATA[
Linux dm8000 3.2-dm8000 #1 SMP Tue Oct 16 04:38:44 CEST 2012 mips GNU/Linux
]]>
		</kernelversion>
		<kernelcmdline>root=/dev/mtdblock3 rootfstype=jffs2 rw console=null quiet bmem=102M@154M</kernelcmdline>
		<nimsockets>NIM Socket 0:</nimsockets>
		<imageversion>
			<!-- No such file or directory -->
		</imageversion>
		<imageissue>
			<![CDATA[
openpli 3.0 %h
]]>
		</imageissue>
	</image>
	<crashlogs>
		<enigma2crashlog>
			<![CDATA[
urites.radio 1042
0 entries in Bouquet userbouquet.favourites.radio
loading bouquet... /etc/enigma2/userbouquet.streamlinksnederland_radioRegionaal.radio 1042
can't open /etc/enigma2/userbouquet.streamlinksnederland_radioRegionaal.radio: No such file or directory
25 entries in Bouquet bouquets.radio
[FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Regular)
[FONT] adding font /usr/share/fonts/andale.ttf...OK (Fixed)
[FONT] adding font /usr/share/fonts/tuxtxt.ttf...OK (Console)
[FONT] adding font /usr/share/fonts/ae_AlMateen.ttf...OK (Replacement)
[FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Regular)
[FONT] adding font /usr/share/fonts/hdi.ttf...OK (Crs)
[FONT] adding font /usr/share/fonts/lcd.ttf...OK (LCD)
[FONT] adding font /usr/share/fonts/tuxtxt.ttf...OK (Console)
[FONT] adding font /usr/share/fonts/andale.ttf...OK (Fixed)
[FONT] adding font /usr/share/fonts/prive3.ttf...OK (prive3)
[FONT] adding font /usr/share/fonts/prive3.ttf...OK (prive4)
[FONT] adding font /usr/share/fonts/valis_enigma.ttf...OK (Subs)
[FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (FdLcD)
[FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (FdLcD)
[FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Regular)
Unknown device type: dreambox front panel
Activating keymap: Default (US)
[ePopen] command: loadkmap < /usr/share/keymaps/default.kmap
Activating language Nederlands
--> setting scaler_sharpness to: 0000000D
couldn't open /proc/stb/misc/12V_output
[ePopen] command: ip -o addr show dev eth0
[ePopen] command: ip -o addr show dev wlan0
setLCDBrightness 25
setLCDBrightness 255
[Picon] adding path: /media/cf/picon/
Plugin  Extensions/WeatherPlugin failed to load: No module named WeatherPlugin.plugin
Plugin probably removed, but not cleanly in /usr/lib/enigma2/python/Plugins/Extensions/WeatherPlugin
Plugin  Extensions/WebInterface failed to load: No module named plugin
Plugin probably removed, but not cleanly in /usr/lib/enigma2/python/Plugins/Extensions/WebInterface
[MyTube] MyTubePlayerService - init
[MerlinEPGCenter] fallback to default translation for single line style
[MerlinEPGCenter] fallback to default translation for with short description
[MerlinEPGCenter] fallback to default translation for simple
[MerlinEPGCenter] fallback to default translation for gradient
[MerlinEPGCenter] fallback to default translation for four parts
[SkinFinder] found skin file /usr/lib/enigma2/python/Plugins/Extensions/MerlinEPGCenter/skins/HD_border.xml
[MerlinEPGCenter] fallback to default translation for More than just an EPG...
[dFlash] Dreambox: !dm8000!
[dFlash] /tmp/dflash.sh created
getModeList for port DVI-PC
getModeList for port YPbPr
getModeList for port Scart
getModeList for port DVI-PC
getModeList for port DVI
hotplug on dvi
-> setting aspect, policy, policy2, wss 16:9 bestfit bestfit auto
-> setting aspect, policy, policy2, wss 16:9 bestfit bestfit auto
-> setting aspect, policy, policy2, wss 16:9 bestfit bestfit auto
-> setting aspect, policy, policy2, wss 16:9 bestfit bestfit auto
setMode - port: DVI mode: 1080i rate: multi
-> setting aspect, policy, policy2, wss 16:9 bestfit bestfit auto
[Ipkg] Added to OPKG destinations: /media/hdd
[Ipkg] Added to OPKG destinations: /media/cf
[EPGCacheSelector] fallback to default translation for Adjust your EPG Cache settings
[NetworkBrowser] fallback to default translation for Mount again
[NetworkBrowser] fallback to default translation for Attempt to mount shares again
starting hotplug handler
[CI_Assignment] activating ci configs:
[CI_Activate] FOUND 4 CI Slots
[CI_Activate_Config_CI0] no config file found
[CI_Activate_Config_CI0] error parsing xml...
[CI_Activate_Config_CI1] no config file found
[CI_Activate_Config_CI1] error parsing xml...
[CI_Activate_Config_CI2] no config file found
[CI_Activate_Config_CI2] error parsing xml...
[CI_Activate_Config_CI3] no config file found
[CI_Activate_Config_CI3] error parsing xml...
[FanControl2] Starting up
[FanControl2] ATA(WDC WD1600AAJS-0) /dev/sda Mode:auto
[FanControl2] HDD Temperature not readable
[FanControl2] HDD supports Temp reading without Spinup
[FanControl2] Generic(USB CF Reader) /dev/sdc Mode:auto
[FanControl2] HDD Temperature not readable
[FanControl2] HDD not supports Temp reading without Spinup -> Disabled
[FanControl2] HDD Temp 0C
[FanControl2] HDD Temp 0C
[SKIN] Parsing embedded skin <embedded-in-'FanControl2'>
[dFlash] autostart
[SKIN] Parsing embedded skin <embedded-in-'ResolutionLabel'>
port changed to DVI
mode changed to 1080i
getModeList for port DVI
default ('1080i', 'default')
preferedmodes ['720p', '576p', '480p', '576i', '480i', ('1080i', 'default')]
[EPGC] setCacheFile read/write epg data from/to '/media/cf/epg.dat'
[EPGC] time updated.. start EPG Mainloop
[ePNG] couldn't open /usr/share/enigma2/ico_dvb_s-fs8.png
[ePNG] couldn't open /usr/share/enigma2/ico_dvb_c-fs8.png
[ePNG] couldn't open /usr/share/enigma2/ico_dvb_t-fs8.png
[ePNG] couldn't open /usr/share/enigma2/ico_service_group-fs8.png
[SKIN] No skin to read...
warning, skin is missing element From in <class 'Screens.Dish.Dish'>
warning, skin is missing element Goto in <class 'Screens.Dish.Dish'>
warning, skin is missing element posGoto in <class 'Screens.Dish.Dish'>
warning, skin is missing element posFrom in <class 'Screens.Dish.Dish'>
warning, skin is missing element turnTime in <class 'Screens.Dish.Dish'>
RemovePopup, id = ZapError
setValue 50
Setvolume: 100 100 (raw)
Setvolume: 0 0 (-1db)
Setvolume: 50 50 (raw)
Setvolume: 32 32 (-1db)
playing 1:0:19:1B6C:C88:3:EB0000:0:0:0:
[EPGC] 58135 events read from /media/cf/epg.dat
not pauseable.
RemovePopup, id = ZapError
allocate channel.. 0c88:0003
opening frontend 0
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 1 Freq 11856000 Pol 1 SR 27500000 INV 2 FEC 4 orbpos 235 system 1 modulation 1 pilot 2, rolloff 0
tuning to 1256 mhz
OURSTATE: tuning
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:19:1B6C:C88:3:EB0000:0:0:0:
allocate demux
child has terminated
pipes closed
child has terminated
pipes closed
[ePopen] command: route -n | grep  eth0
poll: unhandled POLLERR/HUP/NVAL for fd 36(17)
child has terminated
pipes closed
[ePopen] command: route -n | grep  wlan0
child has terminated
pipes closed
poll: unhandled POLLERR/HUP/NVAL for fd 42(16)
poll: unhandled POLLERR/HUP/NVAL for fd 43(16)
poll: unhandled POLLERR/HUP/NVAL for fd 46(16)
[SEC] set static current limiting
set sequence pos 3
set sequence pos 4
[SEC] setVoltage 1
[SEC] sleep 200ms
child has terminated
pipes closed
0.0.0.0
192.168
poll: unhandled POLLERR/HUP/NVAL for fd 40(16)
[SEC] invalidate current switch params
[SEC] sendDiseqc: e00000(DiSEqC reset)
child has terminated
pipes closed
nameservers: [[192, 168, 178, 1]]
read configured interface: {'lo': {'dhcp': False}, 'wlan0': {'dhcp': True}, 'eth0': {'dhcp': True}}
self.ifaces after loading: {'wlan0': {'preup': False, 'predown': False, 'ip': [0, 0, 0, 0], 'up': False, 'mac': '00:23:cd:14:a9:4d', 'dhcp': True, 'netmask': [0, 0, 0, 0], 'gateway': [0, 0, 0, 0]}, 'eth0': {'preup': False, 'predown': False, 'ip': [192, 168, 178, 20], 'up': True, 'mac': '00:09:34:1c:82:34', 'dhcp': True, 'bcast': [192, 168, 178, 255], 'netmask': [255, 255, 255, 0], 'gateway': [192, 168, 178, 1]}}
[OpenWebif] loading external plugins...
[OpenWebif] no plugins to load
[OpenWebif] started on 80
poll: unhandled POLLERR/HUP/NVAL for fd 45(16)
[SEC] sleep 50ms
[SEC] sendDiseqc: e00003(DiSEqC peripherial power on)
[SEC] sleep 150ms
[SEC] sendDiseqc: e01038f9(?)
[SEC] sleep 50ms
set sequence pos 3
[SEC] setTone 1
[SEC] sleep 10ms
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
[SEC] sleep 500ms
(0)fe event: status 1, inversion off, m_tuning 2
(0)fe event: status 1f, inversion off, m_tuning 3
OURSTATE: ok
[eDVBLocalTimerHandler] channel 0x24caee0 running
[eEPGCache] channel 0x24caee0 running
[EPGC] next update in 2 sec
stop release channel timer
ok ... now we start!!
eventNewProgramInfo 0 0
have 1 video stream(s) (0202), and 1 audio stream(s) (0054), and the pcr pid is 0202, and the text pid is 0022
allocate demux
decoder state: play, vpid=514, apid=84
DMX_SET_PES_FILTER(0x202) - pcr - ok
DEMUX_START - pcr - ok
DMX_SET_PES_FILTER(0x54) - audio - ok
DEMUX_START - audio - ok
AUDIO_SET_BYPASS(0) - ok
AUDIO_PAUSE - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 1 - ok
DMX_SET_PES_FILTER(0x202) - video - ok
DEMUX_START - video - ok
VIDEO_FREEZE - ok
VIDEO_PLAY - ok
DMX_SET_PES_FILTER(0x22) - ttx - ok
DEMUX_START - ttx - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
AUDIO_CONTINUE - ok
AUDIO_CHANNEL_SELECT(0) - ok
disable teletext subtitles
not pauseable.
[AutoRes] service changed
[eDVBCAService] new service 1:0:19:1B6C:C88:3:EB0000:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:19:1B6C:C88:3:EB0000:0:0:0:
VIDEO_GET_EVENT - ok
[AutoRes] got event evVideoSizeChanged
VIDEO_GET_EVENT - ok
[AutoRes] got event evVideoProgressiveChanged
PATready
use pmtpid 09d8 for service_id 1b6c
eventNewProgramInfo 0 0
have 1 video stream(s) (0202), and 1 audio stream(s) (0054), and the pcr pid is 0202, and the text pid is 0022
decoder state: play, vpid=514, apid=84
[eDVBCIInterfaces] gotPMT
[SEC] set dynamic current limiting
[OpenWebif] page '/cgi-bin/xmessage?caption=mgcamd&timeout=5&body=+Decode+using+newcamd+%0a+host+cs2gbox.hopto.org+%0a+port+14711+sysid+0' not found
sdt update done!
[AutoRes] determineContent
VIDEO_GET_EVENT - ok
[AutoRes] got event evVideoSizeChanged
[AutoRes] determineContent
[EPGC] start caching events(1353265517)
[eDVBLocalTimerHandler] diff is 0
[eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
[eDVBLocalTimerHandler] not changed
VIDEO_GET_EVENT - ok
[AutoRes] got event evVideoProgressiveChanged
[AutoRes] determineContent
[FanControl2] Fan Reset
[FanControl2] Vlt:255 Pwm:255 Fan:4pin   - BoxOn HDDon
[FanControl2] actueelRPM:1770 doelRPM:3614 Temp:41.5
[EPGC] abort non avail schedule other reading
[EPGC] abort non avail netmed schedule reading
[EPGC] abort non avail netmed schedule other reading
[EPGC] abort non avail FreeSat schedule_other reading
[EPGC] abort non avail viasat reading
[EPGC] abort non avail mhw reading
[FanControl2] Vlt:255 Pwm:255 Fan:4pin   - BoxOn HDDon
[FanControl2] actueelRPM:1740 doelRPM:3614 Temp:41.5
[EPGC] nownext finished(1353265532)
[FanControl2] Vlt:255 Pwm:255 Fan:4pin   - BoxOn HDDon
[FanControl2] actueelRPM:1740 doelRPM:3614 Temp:41.5
[FanControl2] Vlt:255 Pwm:255 Fan:4pin   - BoxOn HDDon
[FanControl2] actueelRPM:1740 doelRPM:3614 Temp:41.5
[FanControl2] Vlt:255 Pwm:255 Fan:4pin   - BoxOn HDDon
[FanControl2] actueelRPM:1740 doelRPM:3955 Temp:42.0
[FanControl2] Vlt:255 Pwm:255 Fan:4pin   - BoxOn HDDon
[FanControl2] actueelRPM:1740 doelRPM:3614 Temp:41.5
[FanControl2] Vlt:255 Pwm:255 Fan:4pin   - BoxOn HDDon
[FanControl2] actueelRPM:1740 doelRPM:3614 Temp:41.5
[FanControl2] Vlt:255 Pwm:255 Fan:4pin   - BoxOn HDDon
[FanControl2] actueelRPM:1740 doelRPM:3614 Temp:41.5
[FanControl2] Vlt:255 Pwm:255 Fan:4pin   - BoxOn HDDon
[FanControl2] actueelRPM:1740 doelRPM:3955 Temp:42.0
[FanControl2] Vlt:255 Pwm:255 Fan:4pin   - BoxOn HDDon
[FanControl2] actueelRPM:1740 doelRPM:3955 Temp:42.0
[EPGC] schedule finished(1353265614)
[EPGC] stop caching events(1353265614)
[EPGC] next update in 60 min
[FanControl2] Vlt:255 Pwm:255 Fan:4pin   - BoxOn HDDon
[FanControl2] actueelRPM:1740 doelRPM:3614 Temp:41.5
[FanControl2] Vlt:255 Pwm:255 Fan:4pin   - BoxOn HDDon
[FanControl2] actueelRPM:1740 doelRPM:3614 Temp:41.5
[FanControl2] Vlt:255 Pwm:255 Fan:4pin   - BoxOn HDDon
[FanControl2] actueelRPM:1740 doelRPM:3955 Temp:42.0
[FanControl2] Vlt:255 Pwm:255 Fan:4pin   - BoxOn HDDon
[FanControl2] actueelRPM:1770 doelRPM:3614 Temp:41.5
[FanControl2] Vlt:255 Pwm:255 Fan:4pin   - BoxOn HDDon
[FanControl2] actueelRPM:1770 doelRPM:3614 Temp:41.5
[FanControl2] Vlt:255 Pwm:255 Fan:4pin   - BoxOn HDDon
[FanControl2] actueelRPM:1740 doelRPM:3614 Temp:41.5
[FanControl2] Vlt:255 Pwm:255 Fan:4pin   - BoxOn HDDon
[FanControl2] actueelRPM:1740 doelRPM:3614 Temp:41.5
[FanControl2] Vlt:255 Pwm:255 Fan:4pin   - BoxOn HDDon
[FanControl2] actueelRPM:1770 doelRPM:3614 Temp:41.5
[FanControl2] Vlt:255 Pwm:255 Fan:4pin   - BoxOn HDDon
[FanControl2] actueelRPM:1740 doelRPM:3955 Temp:42.0
[FanControl2] Vlt:255 Pwm:255 Fan:4pin   - BoxOn HDDon
[FanControl2] actueelRPM:1770 doelRPM:3955 Temp:42.0
[FanControl2] Vlt:255 Pwm:255 Fan:4pin   - BoxOn HDDon
[FanControl2] actueelRPM:1770 doelRPM:3614 Temp:41.5
[FanControl2] Vlt:255 Pwm:255 Fan:4pin   - BoxOn HDDon
[FanControl2] actueelRPM:1740 doelRPM:3955 Temp:42.0
[FanControl2] Vlt:255 Pwm:255 Fan:4pin   - BoxOn HDDon
[FanControl2] actueelRPM:1770 doelRPM:3614 Temp:41.5
[FanControl2] Vlt:255 Pwm:255 Fan:4pin   - BoxOn HDDon
[FanControl2] actueelRPM:1740 doelRPM:3955 Temp:42.0
[FanControl2] Vlt:255 Pwm:255 Fan:4pin   - BoxOn HDDon
[FanControl2] actueelRPM:1740 doelRPM:3955 Temp:42.0
[FanControl2] Vlt:255 Pwm:255 Fan:4pin   - BoxOn HDDon
[FanControl2] actueelRPM:1740 doelRPM:3955 Temp:42.0
[FanControl2] Vlt:255 Pwm:255 Fan:4pin   - BoxOn HDDon
[FanControl2] actueelRPM:1770 doelRPM:3955 Temp:42.0
[FanControl2] Vlt:255 Pwm:255 Fan:4pin   - BoxOn HDDon
[FanControl2] actueelRPM:1770 doelRPM:3955 Temp:42.0
[FanControl2] HDD Temp 0C
[FanControl2] Vlt:255 Pwm:255 Fan:4pin   - BoxOn HDDon
[FanControl2] actueelRPM:1770 doelRPM:3955 Temp:42.0
[FanControl2] Vlt:255 Pwm:255 Fan:4pin   - BoxOn HDDon
[FanControl2] actueelRPM:1770 doelRPM:4295 Temp:42.5
[FanControl2] Vlt:255 Pwm:255 Fan:4pin   - BoxOn HDDon
[FanControl2] actueelRPM:1770 doelRPM:4295 Temp:42.5
[FanControl2] Vlt:255 Pwm:255 Fan:4pin   - BoxOn HDDon
[FanControl2] actueelRPM:1740 doelRPM:4295 Temp:42.5
[FanControl2] Vlt:255 Pwm:255 Fan:4pin   - BoxOn HDDon
[FanControl2] actueelRPM:1740 doelRPM:4295 Temp:42.5
[FanControl2] Vlt:255 Pwm:255 Fan:4pin   - BoxOn HDDon
[FanControl2] actueelRPM:1770 doelRPM:4295 Temp:42.5
[FanControl2] Vlt:255 Pwm:255 Fan:4pin   - BoxOn HDDon
[FanControl2] actueelRPM:1770 doelRPM:4295 Temp:42.5
[FanControl2] Vlt:255 Pwm:255 Fan:4pin   - BoxOn HDDon
[FanControl2] actueelRPM:1770 doelRPM:4295 Temp:42.5
[FanControl2] Vlt:255 Pwm:255 Fan:4pin   - BoxOn HDDon
[FanControl2] actueelRPM:1770 doelRPM:4295 Temp:42.5
[FanControl2] Vlt:255 Pwm:255 Fan:4pin   - BoxOn HDDon
[FanControl2] actueelRPM:1740 doelRPM:4295 Temp:42.5
[FanControl2] Vlt:255 Pwm:255 Fan:4pin   - BoxOn HDDon
[FanControl2] actueelRPM:1740 doelRPM:4295 Temp:42.5
action ->  InfobarChannelSelection historyBack
[FanControl2] Vlt:255 Pwm:255 Fan:4pin   - BoxOn HDDon
[FanControl2] actueelRPM:1770 doelRPM:4295 Temp:42.5
action ->  InfobarChannelSelection historyBack
action ->  InfobarChannelSelection openServiceList
[FanControl2] Vlt:255 Pwm:255 Fan:4pin   - BoxOn HDDon
[FanControl2] actueelRPM:1770 doelRPM:4295 Temp:42.5
action ->  OkCancelActions ok
playing 4097:0:0:0:0:0:0:0:0:0:rtmp%3a//edge03.streamgate.nl/live/omroepflevoland/mp4%3alivestream1.mp4:Omroep Flevoland
[eDVBCAService] free slot 0 demux 0 for service 1:0:19:1B6C:C88:3:EB0000:0:0:0:
[eDVBCAService] free service 1:0:19:1B6C:C88:3:EB0000:0:0:0:
decoder state: play, vpid=-1, apid=-1
DEMUX_STOP - pcr - ok
DEMUX_STOP - video - ok
VIDEO_STOP - ok
AUDIO_STOP - ok
DEMUX_STOP - audio - ok
AUDIO_CONTINUE - ok
DEMUX_STOP - ttx - ok
start release channel timer
eServiceMP3::construct!
eServiceMP3::playbin uri=rtmp://edge03.streamgate.nl/live/omroepflevoland/mp4:livestream1.mp4
eServiceMP3::starting pipeline
PC: 7768a438
00000000 00000001 00000001 00c42d10
00000005 7771c000 00000000 00000000
76cdc974 00000000 81010100 3a3a3a3a
00000008 76696c3a 72747365 7f8772b8
024d5d80 00000000 732e6960 025188c8
73428000 7342b91c 73428000 00000000
00001102 76bf2380 00000010 00000000
7774db10 7f877bc0 73433a54 732ba0a4
As a final action, i will try to dump a bit of code.
I just hope that this won't crash.
7768a438: 28 00 24 8e 09 f8 20 03 21 28 40 02 ee ff 40 10 10 00 bc 8f 04 00 10 8e f7 ff 00 16 24 00 bf 8f (end)
-------
getResolvedKey config.plugins.crashlogautosubmit.sendAnonCrashlog failed !! (Typo??)
getResolvedKey config.plugins.crashlogautosubmit.addNetwork failed !! (Typo??)
getResolvedKey config.plugins.crashlogautosubmit.addWlan failed !! (Typo??)
]]>
		</enigma2crashlog>
	</crashlogs>
</openpli>


Werkt nog steeds niet maar werkt wel op versie 2.1 dus het ligt niet aan mijn skin.En er is nog geen update mogelijk, alles staat op Rood

Edited by Loui (K), 19 November 2012 - 15:19.

Re: Openpli update troubles topic #1788 jeanclaude

  • Senior Member
  • 866 posts

+28
Good

Posted 19 November 2012 - 22:11

en hier ook nog maar eens een crash bij het indrukken van de [STOP] toets bij het bekijken van een opname ....... en deze keer zal het niet aan de skin liggen want ik gebruik nu de bij het PLi meegeleverde "default skin" : Attached File  enigma2_crash_1353358676.log   16.95KB   3 downloads
ik zie veel "broken code" regels staan ?
DreamBox 7000S+8000HD (eindelijk), openPLi, CCcam, 85 cm schotel, draaibare opstelling en VEEL te weinig slaap.

Re: Openpli update troubles topic #1789 pieterg

  • PLi® Core member
  • 32,766 posts

+245
Excellent

Posted 19 November 2012 - 23:52

dat is zo te zien niet na het bekijken van een opname, maar een avi?

Re: Openpli update troubles topic #1790 beebee

  • Senior Member
  • 452 posts

+4
Neutral

Posted 20 November 2012 - 00:30

dat is zo te zien niet na het bekijken van een opname, maar een avi?

Mijn Camera schrijft al een paar dagen geen .avi file meer op de Harddisk.
in de .Trash dir heb ik een Camera dir waar ze ingeschreven worden. Dit heb ik gedaan, omdat ze dan auto verwijderd worden na 7 dagen.
Ergens vorige week werden de files nog wel opgeslagen.....

De dag/datum dirs en de Uren Dirs worden nog wel gemaakt, maar in het laatste uur staat alleen een Tempfile waar de camera in schrijft, die normaal wordt omgezet in een .avi. Die files komen er niet meer in.

Kan dit met het huidige probleem in de laatste versies te maken hebben, of moet ik het ergens anders zoeken???
Beebee
______________________________________________________________________
DM8000 + mutifeed 13E+19.2E+23.5E+28.2E en ook nog de rotor werkend op Tuner A.

Re: Openpli update troubles topic #1791 Loui (PD1LOI)

  • Senior Member
  • 4,601 posts

+146
Excellent

Posted 20 November 2012 - 10:01

dat is zo te zien niet na het bekijken van een opname, maar een avi?


Ik ben even terug gegaan naar OpenPli 2.1 nu werkt alles weer, maar gisteren onder 3.0 werkte er bij mij bijna niets. ik kon geen films afspelen geen webstreams bekijken bij alles kreeg ik een groen scherm.

Re: Openpli update troubles topic #1792 metoo

  • Senior Member
  • 1,573 posts

+33
Good

Posted 20 November 2012 - 10:07

webstrems doen het hier weer met de laatstr update nu

Edited by metoo, 20 November 2012 - 10:08.

ET10000 C C C C/T  2TB HDD ET7000 + ET6000 dvb-S  OpenPli Triax 88 multifeed quad LNBs VU Uno4K SE C+2TB HDD Mutant HD60

Re: Openpli update troubles topic #1793 Henksat

  • Senior Member
  • 14,843 posts

+50
Good

Posted 20 November 2012 - 10:08

webstrems doen het hier weer met de update van vandaag


Kijk, klinkt goed, dat wilde we horen.

Re: Openpli update troubles topic #1794 Loui (PD1LOI)

  • Senior Member
  • 4,601 posts

+146
Excellent

Posted 20 November 2012 - 11:01

webstrems doen het hier weer met de laatstr update nu


Ook voor de DM8000??? ik heb nu nog de 2.1 erop.

Re: Openpli update troubles topic #1795 Henksat

  • Senior Member
  • 14,843 posts

+50
Good

Posted 20 November 2012 - 11:42

Ook voor de DM8000??? ik heb nu nog de 2.1 erop.


Daar is geen update voor.

Re: Openpli update troubles topic #1796 metoo

  • Senior Member
  • 1,573 posts

+33
Good

Posted 20 November 2012 - 11:43

Louis,
Weet ik niet, heb ET6000 geupdated, heb geen dmm's meer

Edited by metoo, 20 November 2012 - 11:47.

ET10000 C C C C/T  2TB HDD ET7000 + ET6000 dvb-S  OpenPli Triax 88 multifeed quad LNBs VU Uno4K SE C+2TB HDD Mutant HD60

Re: Openpli update troubles topic #1797 Loui (PD1LOI)

  • Senior Member
  • 4,601 posts

+146
Excellent

Posted 20 November 2012 - 14:00

Joepieeee hihih hier werkt alles weer op mijn DM8000-HD. Toppie heren.

Re: Openpli update troubles topic #1798 jeanclaude

  • Senior Member
  • 866 posts

+28
Good

Posted 20 November 2012 - 19:54

en wat scheelt er met een avi ? deze werd perfect afgespeeld, niks verkeerd mee. Maar ik druk op de [STOP] knop en enigma2 crasht - en niet voor de eerste keer ........
DreamBox 7000S+8000HD (eindelijk), openPLi, CCcam, 85 cm schotel, draaibare opstelling en VEEL te weinig slaap.

Re: Openpli update troubles topic #1799 Loui (PD1LOI)

  • Senior Member
  • 4,601 posts

+146
Excellent

Posted 21 November 2012 - 10:45

en wat scheelt er met een avi ? deze werd perfect afgespeeld, niks verkeerd mee. Maar ik druk op de [STOP] knop en enigma2 crasht - en niet voor de eerste keer ........


Hier bij mij niet hij stopt de film gewoon met het afspelen van een avi.

Re: Openpli update troubles topic #1800 jeanclaude

  • Senior Member
  • 866 posts

+28
Good

Posted 21 November 2012 - 11:20

het is nu ook niet dat enigma2 elke keer crasht, hé. Ik speel dagelijks bestanden af, zowel AVI's als TS als MKV's, en meestal levert dit geen enkel probleem op, noch op het einde noch bij het vroegtijdig stoppen. Maar toch hangt enigma2 zich hier regelmatig op (schat minstens 1x per week). daarom dus dat ik die crashlog doorgestuurd heb, wie weet zien ze iets speciaals in de logging. In de laatste stond ergens iets van een "overflow". Ik kan me niet ontdoen van de indruk dat de 8000 nog altijd problemen heeft met zijn geheugen, ondanks een fikse swapfile (256 mega op CF).
ik heb iets gelezen over nieuwe drivers voor de 8000 - is hier al iets over bekend ?
DreamBox 7000S+8000HD (eindelijk), openPLi, CCcam, 85 cm schotel, draaibare opstelling en VEEL te weinig slaap.
Back to [NL] Gebruikersondersteuning

Also tagged with one or more of these keywords: Algemeen

3 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users


    Bing (2)
  1. Forums
  2. → PLi® Support
  3. → [NL] Gebruikersondersteuning