<?xml version="1.0" encoding="utf-8"?>
<openpli>
<enigma2>
<crashdate>do jun 20 11:16:51 2013</crashdate>
<compiledate>Jun 20 2013</compiledate>
<contactemail>forum at www.openpli.org</contactemail>
<!-- Please email this crashlog to above address -->
<skin>PLi-HD/skin.xml</skin>
<sourcedate>2013-06-13</sourcedate>
<branch>(no branch)</branch>
<rev>3e15a17</rev>
<version>3.0.0</version>
</enigma2>
<image>
<stbmodel>dm500hd</stbmodel>
<kernelversion>
<![CDATA[
Linux dm500hd 3.2-dm500hd #1 SMP Sat Jun 1 05:27:36 CEST 2013 mips GNU/Linux
]]>
</kernelversion>
<kernelcmdline>root=/dev/mtdblock3 rootfstype=jffs2 rw console=ttyS0,115200 quiet bmem=116M@140M</kernelcmdline>
<nimsockets>NIM Socket 0:</nimsockets>
<imageversion>
<!-- No such file or directory -->
</imageversion>
<imageissue>
<![CDATA[
openpli 3.0 %h
]]>
</imageissue>
</image>
<crashlogs>
<enigma2crashlog>
<![CDATA[
/HarddiskDM8000'
[ePopen] command: mount -t cifs -o rw,noatime,noserverino,iocharset=utf8,username=root,password=dreambox '//192.168.178.21/Harddisk' '/media/net/HarddiskDM8000'
[NetworkBrowser] fallback to default translation for Mount again
[NetworkBrowser] fallback to default translation for Attempt to mount shares again
eHdmiCEC: detected physical address change: A86A --> 7077
eHdmiCEC: send message 84 70 77 01
starting hotplug handler
[TIMER] record time changed, start prepare is now: Thu Jun 20 15:14:40 2013
set rotor timeout to 360 seconds
[Timer] Record RecordTimerEntry(name=Recht in de regio, begin=Thu Jun 20 15:15:00 2013, serviceref=1:0:1:FAC:451:35:C00000:0:0:0:, justplay=0)
[TIMER] record time changed, start prepare is now: Thu Jun 20 17:44:40 2013
[Timer] Record RecordTimerEntry(name=#Kansloos, begin=Thu Jun 20 17:45:00 2013, serviceref=1:0:1:7EF:449:35:C00000:0:0:0:, justplay=0)
[TIMER] record time changed, start prepare is now: Fri Jun 21 20:14:40 2013
[Timer] Record RecordTimerEntry(name=De 25 gekste hobby's, begin=Fri Jun 21 20:15:00 2013, serviceref=1:0:1:FA2:451:35:C00000:0:0:0:, justplay=0)
[TIMER] record time changed, start prepare is now: Mon Jun 17 21:39:40 2013
[Timer] Record RecordTimerEntry(name=Hardcore pawn, begin=Mon Jun 17 21:40:00 2013, serviceref=1:0:1:7EF:449:35:C00000:0:0:0:, justplay=0)
[TIMER] record time changed, start prepare is now: Mon Jun 17 23:09:40 2013
[Timer] Record RecordTimerEntry(name=De meest schokkende vliegtuigrampen, begin=Mon Jun 17 23:10:00 2013, serviceref=1:0:1:FA2:451:35:C00000:0:0:0:, justplay=0)
[TIMER] record time changed, start prepare is now: Wed Jun 19 18:09:40 2013
[Timer] Record RecordTimerEntry(name=Wat Weet Nederland, begin=Wed Jun 19 18:10:00 2013, serviceref=1:0:1:FAC:451:35:C00000:0:0:0:, justplay=0)
wasTimerWakeup failed!
[EPGC] setCacheFile read/write epg data from/to '/hdd/epg.dat'
[SKIN] Parsing embedded skin <embedded-in-'Screensaver'>
[SKIN] No skin to read...
warning, skin is missing element From in <class 'Screens.Dish.Dish'>
warning, skin is missing element Goto in <class 'Screens.Dish.Dish'>
RemovePopup, id = ZapError
setValue 40
Setvolume: 100 100 (raw)
Setvolume: 0 0 (-1db)
Setvolume: 40 40 (raw)
Setvolume: 38 38 (-1db)
playing 1:0:1:FB0:451:35:C00000:0:0:0:
statfs failed!
not pauseable.
statfs failed!
not pauseable.
statfs failed!
RemovePopup, id = ZapError
allocate channel.. 0451:0035
opening frontend 0
(0)tune
Entry for 19,2? not in Rotor Table found... i try gotoXX?
siteLatitude = 51.200001, siteLongitude = 3.200000, 19.200000 degrees
PolarmountHourAngle=162.356063
RotorCmd = e11a
RotorCmd e11a, lastRotorCmd ffffffff
set rotor timeout to 360 seconds
prepare_sat System 0 Freq 12515250 Pol 0 SR 22000000 INV 2 FEC 4 orbpos 192 system 0 modulation 1 pilot 2, rolloff 0
tuning to 1915 mhz
OURSTATE: tuning
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:1:FB0:451:35:C00000:0:0:0:
allocate demux
child has terminated
pipes closed
child has terminated
pipes closed
cidr invalid: 64
[ePopen] command: route -n | grep eth0
poll: unhandled POLLERR/HUP/NVAL for fd 32(16)
poll: unhandled POLLERR/HUP/NVAL for fd 36(16)
child has terminated
pipes closed
[AutoMount.py] CheckMountPointFinished 0
[AutoMount.py] symlink /media/net/HarddiskDM8000 /media/hdd
[AutoMount.py] U/MOUNTCMD---> mount -t cifs -o rw,noatime,noserverino,iocharset=utf8,username=root,password=dreambox '//192.168.178.21/export/hdd' '/media/net/hardisk'
[ePopen] command: mount -t cifs -o rw,noatime,noserverino,iocharset=utf8,username=root,password=dreambox '//192.168.178.21/export/hdd' '/media/net/hardisk'
poll: unhandled POLLERR/HUP/NVAL for fd 43(16)
[SEC] set static current limiting
set sequence pos 3
[SEC] setVoltage 1
[SEC] sleep 900ms
child has terminated
pipes closed
0.0.0.0
192.168
nameservers: [[192, 168, 178, 1]]
read configured interface: {'bnep0': {'dhcp': True}, 'usb0': {'dhcp': False}, 'lo': {'dhcp': False}, 'wlan0': {'dhcp': True}, 'atml0': {'dhcp': True}, 'eth1': {'dhcp': True}, 'eth0': {'dhcp': True}}
self.ifaces after loading: {'eth0': {'preup': False, 'predown': False, 'ip': [192, 168, 178, 24], 'up': True, 'mac': '00:09:34:2b:7a:ea', 'dhcp': True, 'bcast': [192, 168, 178, 255], 'netmask': [255, 255, 255, 0], 'gateway': [192, 168, 178, 1]}}
[OpenWebif] loading external plugins...
[OpenWebif] no plugins to load
[OpenWebif] started on 80
[OpenWebif] started on 443
poll: unhandled POLLERR/HUP/NVAL for fd 34(16)
child has terminated
pipes closed
[AutoMount.py] CheckMountPointFinished retrying with upper case share name
mount error(6): No such device or address
Refer to the mount.cifs(8) manual page (e.g.man mount.cifs)
mount: mounting //192.168.178.21/export/hdd on /media/net/hardisk failed: No such device or address
32
poll: unhandled POLLERR/HUP/NVAL for fd 37(17)
set sequence pos 9
[SEC] invalidate current rotorparams
[SEC] sendDiseqc: e0316ee11a(?)
[SEC] sleep 1000ms
[SEC] sleep 2000ms
[SEC] setVoltage 2
[SEC] setTone 1
[SEC] sleep 10ms
[SEC] setFrontend 0
setting frontend 0
[SEC] set timeout 1440
[SEC] sleep 250ms
[SEC] locked step 0 ok
set sequence pos -3
[SEC] sleep 250ms
[SEC] locked step 1 ok
set sequence pos -3
[SEC] sleep 250ms
[SEC] locked step 2 ok
set sequence pos -3
[SEC] sleep 250ms
[SEC] locked step 3 ok
set sequence pos -3
[SEC] sleep 250ms
[SEC] locked step 4 ok
ok > 4 .. goto 3
set sequence pos 3
OURSTATE: ok
[eDVBLocalTimerHandler] channel 0x21768e8 running
[eEPGCache] channel 0x21768e8 running
stop release channel timer
ok ... now we start!!
eventNewProgramInfo 0 0
have 1 video stream(s) (020d), and 1 audio stream(s) (007a), and the pcr pid is 1ffe, and the text pid is 0028
allocate demux
decoder state: play, vpid=525, apid=122
DMX_SET_PES_FILTER(0x1ffe) - pcr - ok
DEMUX_START - pcr - ok
DMX_SET_PES_FILTER(0x7a) - audio - ok
DEMUX_START - audio - ok
AUDIO_SET_BYPASS(1) - ok
AUDIO_PAUSE - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 0 - ok
DMX_SET_PES_FILTER(0x20d) - video - ok
DEMUX_START - video - ok
VIDEO_FREEZE - ok
VIDEO_PLAY - ok
DMX_SET_PES_FILTER(0x28) - ttx - ok
DEMUX_START - ttx - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
AUDIO_CONTINUE - ok
AUDIO_CHANNEL_SELECT(0) - ok
disable teletext subtitles
not pauseable.
not pauseable.
[eDVBCAService] new service 1:0:1:FB0:451:35:C00000:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:1:FB0:451:35:C00000:0:0:0:
RemovePopup, id = ZapError
[eDVBLocalTimerHandler] dont have correction.. set Transponder Diff
[eDVBLocalTimerHandler] update RTC
[eDVBLocalTimerHandler] time update to 11:16:15
[eDVBLocalTimerHandler] m_time_difference is 1371719723
[eDVBLocalTimerHandler] set Linux Time
[EPGC] time updated.. start EPG Mainloop
VIDEO_GET_EVENT - ok
VIDEO_GET_EVENT - ok
[SEC] update current rotorparams 1435 e11a 192
set sequence pos 4
[SEC] update current switch params
[SEC] sleep 500ms
PATready
use pmtpid 0844 for service_id 0fb0
eventNewProgramInfo 0 0
have 1 video stream(s) (020d), and 1 audio stream(s) (007a), and the pcr pid is 1ffe, and the text pid is 0028
decoder state: play, vpid=525, apid=122
[eDVBCIInterfaces] gotPMT
poll: unhandled POLLERR/HUP/NVAL for fd 53(16)
[SEC] set dynamic current limiting
VIDEO_GET_EVENT - ok
sdt update done!
[EPGC] 23693 events read from /hdd/epg.dat
[EPGC] next update in 2 sec
action -> InfobarChannelSelection switchChannelUp
VIDEO_GET_EVENT - ok
[EPGC] start caching events(1371719778)
action -> OkCancelActions ok
playing 1:0:1:7DF:449:35:C00000:0:0:0:
[eDVBCAService] free slot 0 demux 0 for service 1:0:1:FB0:451:35:C00000:0:0:0:
[eDVBCAService] free service 1:0:1:FB0:451:35:C00000:0:0:0:
decoder state: play, vpid=-1, apid=-1
DEMUX_STOP - pcr - ok
DEMUX_STOP - video - ok
VIDEO_STOP - ok
AUDIO_STOP - ok
DEMUX_STOP - audio - ok
AUDIO_CONTINUE - ok
DEMUX_STOP - ttx - ok
start release channel timer
not pauseable.
not pauseable.
RemovePopup, id = ZapError
[eDVBLocalTimerHandler] remove channel 0x21768e8
[eEPGCache] remove channel 0x21768e8
[EPGC] abort caching events !!
allocate channel.. 0449:0035
(0)tune
Entry for 19,2? not in Rotor Table found... i try gotoXX?
siteLatitude = 51.200001, siteLongitude = 3.200000, 19.200000 degrees
PolarmountHourAngle=162.356063
RotorCmd = e11a
RotorCmd e11a, lastRotorCmd e11a
prepare_sat System 0 Freq 12343500 Pol 0 SR 27500000 INV 2 FEC 3 orbpos 192 system 0 modulation 1 pilot 2, rolloff 0
tuning to 1743 mhz
OURSTATE: tuning
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:1:7DF:449:35:C00000:0:0:0:
allocate demux
[SEC] set static current limiting
set sequence pos 3
set sequence pos 3
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
[SEC] sleep 500ms
(0)fe event: status 1, inversion off, m_tuning 2
(0)fe event: status 1f, inversion off, m_tuning 3
OURSTATE: ok
[eDVBLocalTimerHandler] channel 0x21b0548 running
[eEPGCache] channel 0x21b0548 running
stop release channel timer
[EPGC] next update in 2 sec
ok ... now we start!!
eventNewProgramInfo 0 0
have 1 video stream(s) (0203), and 1 audio stream(s) (0058), and the pcr pid is 1ffe, and the text pid is 0022
allocate demux
decoder state: play, vpid=515, apid=88
DMX_SET_PES_FILTER(0x1ffe) - pcr - ok
DEMUX_START - pcr - ok
DMX_SET_PES_FILTER(0x58) - audio - ok
DEMUX_START - audio - ok
AUDIO_SET_BYPASS(1) - ok
AUDIO_PAUSE - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 0 - ok
DMX_SET_PES_FILTER(0x203) - video - ok
DEMUX_START - video - ok
VIDEO_FREEZE - ok
VIDEO_PLAY - ok
DMX_SET_PES_FILTER(0x22) - ttx - ok
DEMUX_START - ttx - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
AUDIO_CONTINUE - ok
disable teletext subtitles
not pauseable.
not pauseable.
[eDVBCAService] new service 1:0:1:7DF:449:35:C00000:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:1:7DF:449:35:C00000:0:0:0:
RemovePopup, id = ZapError
PATready
use pmtpid 07df for service_id 07df
eventNewProgramInfo 0 0
have 1 video stream(s) (0203), and 1 audio stream(s) (0058), and the pcr pid is 1ffe, and the text pid is 0022
decoder state: play, vpid=515, apid=88
[eDVBCIInterfaces] gotPMT
[SEC] set dynamic current limiting
sdt update done!
action -> InfobarChannelSelection switchChannelDown
[EPGC] start caching events(1371719781)
action -> OkCancelActions ok
playing 1:0:1:FB0:451:35:C00000:0:0:0:
[eDVBCAService] free slot 0 demux 0 for service 1:0:1:7DF:449:35:C00000:0:0:0:
[eDVBCAService] free service 1:0:1:7DF:449:35:C00000:0:0:0:
decoder state: play, vpid=-1, apid=-1
DEMUX_STOP - pcr - ok
DEMUX_STOP - video - ok
VIDEO_STOP - ok
AUDIO_STOP - ok
DEMUX_STOP - audio - ok
AUDIO_CONTINUE - ok
DEMUX_STOP - ttx - ok
start release channel timer
not pauseable.
not pauseable.
RemovePopup, id = ZapError
[eDVBLocalTimerHandler] remove channel 0x21b0548
[eEPGCache] remove channel 0x21b0548
[EPGC] abort caching events !!
allocate channel.. 0451:0035
(0)tune
Entry for 19,2? not in Rotor Table found... i try gotoXX?
siteLatitude = 51.200001, siteLongitude = 3.200000, 19.200000 degrees
PolarmountHourAngle=162.356063
RotorCmd = e11a
RotorCmd e11a, lastRotorCmd e11a
prepare_sat System 0 Freq 12515250 Pol 0 SR 22000000 INV 2 FEC 4 orbpos 192 system 0 modulation 1 pilot 2, rolloff 0
tuning to 1915 mhz
OURSTATE: tuning
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:1:FB0:451:35:C00000:0:0:0:
allocate demux
[SEC] set static current limiting
set sequence pos 3
set sequence pos 3
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
[SEC] sleep 500ms
(0)fe event: status 1, inversion off, m_tuning 2
(0)fe event: status 1f, inversion off, m_tuning 3
OURSTATE: ok
[eDVBLocalTimerHandler] channel 0x74914580 running
[eEPGCache] channel 0x74914580 running
[EPGC] next update in 2 sec
stop release channel timer
ok ... now we start!!
eventNewProgramInfo 0 0
have 1 video stream(s) (020d), and 1 audio stream(s) (007a), and the pcr pid is 1ffe, and the text pid is 0028
allocate demux
decoder state: play, vpid=525, apid=122
DMX_SET_PES_FILTER(0x1ffe) - pcr - ok
DEMUX_START - pcr - ok
DMX_SET_PES_FILTER(0x7a) - audio - ok
DEMUX_START - audio - ok
AUDIO_SET_BYPASS(1) - ok
AUDIO_PAUSE - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 0 - ok
DMX_SET_PES_FILTER(0x20d) - video - ok
DEMUX_START - video - ok
VIDEO_FREEZE - ok
VIDEO_PLAY - ok
DMX_SET_PES_FILTER(0x28) - ttx - ok
DEMUX_START - ttx - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
AUDIO_CONTINUE - ok
disable teletext subtitles
not pauseable.
not pauseable.
[eDVBCAService] new service 1:0:1:FB0:451:35:C00000:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:1:FB0:451:35:C00000:0:0:0:
RemovePopup, id = ZapError
PATready
use pmtpid 0844 for service_id 0fb0
eventNewProgramInfo 0 0
have 1 video stream(s) (020d), and 1 audio stream(s) (007a), and the pcr pid is 1ffe, and the text pid is 0028
decoder state: play, vpid=525, apid=122
[eDVBCIInterfaces] gotPMT
[eDVBCAService] don't build/send the same CA PMT twice
[SEC] set dynamic current limiting
sdt update done!
[EPGC] start caching events(1371719785)
[eDVBLocalTimerHandler] diff is 0
[eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
[eDVBLocalTimerHandler] not changed
action -> InfobarMenuActions mainMenu
loading mainmenu XML...
TimerEdit TimerEditList
PluginBrowser PluginBrowser
action -> OkCancelActions ok
okbuttonClick
[EPGC] abort non avail schedule other reading
[EPGC] abort non avail netmed schedule reading
[EPGC] abort non avail netmed schedule other reading
[EPGC] abort non avail FreeSat schedule_other reading
[EPGC] abort non avail viasat reading
action -> WizardActions back
action -> OkCancelActions cancel
action -> InfobarExtensions extensions
[EPGC] nownext finished(1371719800)
action -> WizardActions back
action -> InfobarExtensions extensions
action -> WizardActions down
action -> DirectionActions downUp
unknown action DirectionActions/downUp! typo in keymap?
action -> WizardActions down
action -> DirectionActions downUp
unknown action DirectionActions/downUp! typo in keymap?
action -> WizardActions down
action -> DirectionActions downUp
unknown action DirectionActions/downUp! typo in keymap?
action -> WizardActions down
action -> DirectionActions downUp
unknown action DirectionActions/downUp! typo in keymap?
action -> WizardActions down
action -> DirectionActions downUp
unknown action DirectionActions/downUp! typo in keymap?
action -> WizardActions ok
[eDVBCAService] free slot 0 demux 0 for service 1:0:1:FB0:451:35:C00000:0:0:0:
[eDVBCAService] free service 1:0:1:FB0:451:35:C00000:0:0:0:
decoder state: play, vpid=-1, apid=-1
DEMUX_STOP - pcr - ok
DEMUX_STOP - video - ok
VIDEO_STOP - ok
AUDIO_STOP - ok
DEMUX_STOP - audio - ok
AUDIO_CONTINUE - ok
DEMUX_STOP - ttx - ok
start release channel timer
playing 4114:0:0:0:0:0:0:0:0:0:http%3a//192.168.178.21%3a8001/1%3a0%3a19%3a17B2%3aC82%3a3%3aEB0000%3a0%3a0%3a0%3a
allocate demux
[Partnerbox] fallback to default translation for mins
resolved to PLAY
[Partnerbox] fallback to default translation for mins
decoder state: pause, vpid=531, apid=108
DMX_SET_PES_FILTER(0x6c) - audio - ok
DEMUX_START - audio - ok
AUDIO_SET_BYPASS(1) - ok
AUDIO_PAUSE - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux4
VIDEO_SET_STREAMTYPE 1 - ok
DMX_SET_PES_FILTER(0x213) - video - ok
DEMUX_START - video - ok
VIDEO_FREEZE - ok
VIDEO_PLAY - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_FREEZE - ok
AUDIO_PAUSE - ok
PC: 00000000
00000000 00000001 0208b1b0 00eec130
0208b1b0 0218c200 00000000 021087fc
00000000 00000000 020fd3ac 3a3a3a3a
51c2c867 2d3c6dbc 51c2c867 175c7426
022a4190 0218c200 00e3a400 0208b369
00000002 75f3fbc0 0203c578 00000000
00000000 00000000 00000083 00000000
769bb3c0 7f846478 00000000 005d60fc
-------
getResolvedKey config.plugins.crashlogautosubmit.sendAnonCrashlog failed !! (Typo??)
getResolvedKey config.plugins.crashlogautosubmit.addNetwork failed !! (Typo??)
getResolvedKey config.plugins.crashlogautosubmit.addWlan failed !! (Typo??)
]]>
</enigma2crashlog>
</crashlogs>
</openpli>
Edited by Tech, 20 June 2013 - 13:16.
Even wat leesbaarder gemaakt