1315 replies to this topic

[pzanone]

I solved it thanks

[WanWizard]

How ?

[pzanone]

unfortunately this team that gave me this image based on pli9 , doesn't have much in the feeds.
so I used an ipk that is found on the various panels..
I added 2 files (overwrite existing file)

/usr/sbin/mkfs.ubifs
/usr/sbin/ubinize

 

 

finally work on h8.2h

 

thanks @WanWizard for your support

 

 

 1_0_19_515_99_217C_EEEE0000_0_0_0_20240130192522.jpg   130.28KB   4 downloads

Edited by pzanone, 30 January 2024 - 21:29.

[WanWizard]

and where did you get those from?

[pzanone]

I tried with the 2 official pli9 files
regards

[didu]

 

/usr/sbin/nanddump openPLi 8.3 --->replace openPLi 9.0

 

Thank you it works perfectly....  

 

I have it this Zgemma H2H. How it solved? Where did you download it from "nanddump openPLi 8.3"?

[s3n0]

unfortunately this team that gave me this image based on pli9 , doesn't have much in the feeds.
so I used an ipk that is found on the various panels..
I added 2 files (overwrite existing file)

/usr/sbin/mkfs.ubifs
/usr/sbin/ubinize

 

 

finally work on h8.2h

 

thanks @WanWizard for your support

 

 

1_0_19_515_99_217C_EEEE0000_0_0_0_20240130192522.jpg

 

 

Hi. Ubinize and mkfs.ubifs are part of a ready-made package of various and multiple tools for working with UBI FS. You probably didn't have it installed... don't know why:

opkg update
opkg install mtd-utils-ubifs

Probably the installation package you used, used for firmware backups, does not contain a note for the requirement to install this package - probably these missing dependencies are not added there - the need to also install the "mtd-utils-ubifs" package.

 

And this package is also included in the OpenPLi 9 feed (2024-oct-05):

----------------------- PACKAGES FOUND: -----------------------
index = 796961, url = http://downloads.openpli.org/feeds/openpli-9-release/mips32el/mtd-utils-ubifs_2.1.2-r0.0_mips32el.ipk
index = 966221, url = http://downloads.openpli.org/feeds/openpli-9-release/armv7ahf-neon/mtd-utils-ubifs_2.1.2-r0.0_armv7ahf-neon.ipk
index = 1094956, url = http://downloads.openpli.org/feeds/openpli-9-release/armv7vehf-neon-vfpv4/mtd-utils-ubifs_2.1.2-r0.0_armv7vehf-neon-vfpv4.ipk
index = 1221804, url = http://downloads.openpli.org/feeds/openpli-9-release/cortexa7hf-vfp/mtd-utils-ubifs_2.1.2-r0.0_cortexa7hf-vfp.ipk
index = 1349634, url = http://downloads.openpli.org/feeds/openpli-9-release/cortexa15hf-neon-vfpv4/mtd-utils-ubifs_2.1.2-r0.0_cortexa15hf-neon-vfpv4.ipk

Edited by s3n0, 5 October 2024 - 09:23.

[Alex_NL]

Backupsuite doesn't work on Xtrend ET10000, develop image.

You have to unplug receiver because 30 minutes after starting Full back-up on HDD it's still creating kerneldump..........................

More than two years later and I come across this same issue.
 

I used Automatic Full Backup until march 2024 to create a backup every night, so that in a event something goes wrong I can go back one day when everything was working.
 

At the moment I have been trying to make a full backup with the automatic full backup plugin and with the Backupsuite plugin.
Tried it on two different USB-sticks and on a Sata-SSD, which I build in this week and was completely initialised after that.

 

All attempts failed and the receiver stops at creating kerneldump.
Sometime I even had to power off the ET10000 to get it working again.

 

I have had the plugins removed and (separately) installed them again.

 

I waited longer than half an hour, once I even kept it running the whole night.

Is there a way to see in a log what's wrong?
Are there other ways to make a full backup?

Attached Files

•  BackupSuite.jpg   85.47KB   0 downloads
•  automaticfullbackup.png   206.41KB   0 downloads

Edited by Alex_NL, 7 January 2025 - 23:52.

[Alex_NL]

Regarding the previous post, this is the information about my receiver and the installed image:

Attached Files

•  information.png   629.31KB   0 downloads

[Dimitrij]

/tmp/BackupSuite.log

[Alex_NL]

The box rebooted, so after that no nog anymore in /tmp
Right before the reboot, this was in /tmp/BackupSuite.log
 

*** THIS BACKUP IS CREATED WITH THE BACKUPSUITE PLUGIN ***
*****  https://github.com/persianpros/BackupSuite-PLi  ******

Plugin version     = 4501eb8
Back-up media      = /hdd
Filesystem                Size      Used Available Use% Mounted on
/dev/sda1               111.3G     10.5G     99.8G  10% /media/hdd

Back-up = 2025.01.08_18:20
Version = openpli 9.1-release 
Flashed = 2024.12.16_01:12
Updated = 2025.01.07_23:20
Drivers = et-dvb-modules-et10000 - 4.10.6+20200402-r0.0
Enigma2 = 2025-01-02 (9.1-release)


Working directory  = /hdd/bi
Not Open Vision, OpenPLi or SatDreamGr maybe?
Destination        = /hdd/fullbackup_et10000/20250108_1820/et10000

RECEIVER = Xtrend ET10000 
MKUBIFS_ARGS = -m 2048 -e 126976 -c 8192
UBINIZE_ARGS = -m 2048 -p 128KiB
KERNEL omvang om te backuppen:   6144 KB
ROOTFS omvang om te backuppen: 297356 KB
=TOTAL omvang om te backuppen: 303500 KB (= 296 MB)
Een ogenblik geduld, de back-up wordt nu gemaakt, dit duurt ongeveer: 20.14 minuten

*** FIRST SOME HOUSEKEEPING ***
Remove directory   = /hdd/bi
Recreate directory = /hdd/bi
Create directory   = /tmp/bi/root

UBINIZE.CFG CREATED WITH THE CONTENT:
[ubifs]
mode=ubi
image=/hdd/bi/root.ubi
vol_id=0
vol_type=dynamic
vol_name=rootfs
vol_flags=autoresize
--------------------------

Maak nu de kerneldump
Kernel resides on mtd1

So, I am not getting wiser out of that.

[Dimitrij]

Same problem

 

/usr/sbin/nanddump openPLi 8.3 --->replace openPLi 9.0/9.1

Edited by Dimitrij, Yesterday, 06:23.

[Alex_NL]

I don't understand what you mean with that.

[Dimitrij]

I don't understand what you mean with that.

Read this topic above.

[Alex_NL]

 

hi Domitrij,

 

Thank you my friend for replying to me. Can you please tell me what I should do to resolve it this problem with backupsuite? I'm using release 9.0 version of openpli but it doesn't work with my zgemma h5.2.plus.. release 8.3 works very well. if you can please find me a solution. thanks a lot to everyone

Copy /usr/sbin/nanddump 8.3 --->9.0
 

 

I still don't understand.
I am sorry I am not that good in understanding it with just one line without explanation, and I am very sorry that I ask for you help.
I already have OpenPLi 9.1 (probably unnoticed changed from 9.0 to 9.1 when I did an update), but I want to change to develop version.
So if I already have 9.1 how can I copy anything from 8.3 ?

[Dimitrij]

Ask to post this file.

/usr/sbin/nanddump openPLi 8.*/7.*