BackupSuite
Re: BackupSuite #121
Re: BackupSuite #122
Re: BackupSuite #123
Re: BackupSuite #124
Re: BackupSuite #125
Re: BackupSuite #126
Re: BackupSuite #127
Re: BackupSuite #128
Re: BackupSuite #129
Re: BackupSuite #130
Re: BackupSuite #131
Re: BackupSuite #132
Re: BackupSuite #133
Re: BackupSuite #134
Re: BackupSuite #135
Re: BackupSuite #136
Posted 26 October 2013 - 11:07
Re: BackupSuite #137
Posted 26 October 2013 - 14:31
- you'll have to provide the path used one the USB-sticks when flashing like the Xtrends use e.g. /et9x00/<files>, the VU's use /vuplus/duo2/<files> etc. and change the $MAINDEST accordingly
- determine the used filenames like e.g. kernel.bin, rootfs.bin, e2-rootfs.jffs2, e2-kernel.bin or whatever name used and any other file needed to flash.
- you'll have to determine the make and model of the box while running the backupsuite.sh by e.g. cat /proc/stb/info/boxtype (if present or any other way to determine the mark/model) and feed it to $MODEL or manipulate it to suite your needs, or hardcode it with MODEL=<the required name>
- for the kernel dump use $NANDDUMP /dev/mtd5 -q > "$WORKDIR/vmlinux.gz"
If you change the current backupsuite.sh accordingly you would get a whole end may be even without errors but you should test run and report back with the log.
You can change the ET's parts in the backupsuite.sh to test it or use the backupsuite.sh I made for you last may for the Hypercube.
Re: BackupSuite #138
Posted 26 October 2013 - 18:31
- you'll have to provide the path used one the USB-sticks when flashing like the Xtrends use e.g. /et9x00/<files>, the VU's use /vuplus/duo2/<files> etc. and change the $MAINDEST accordingly
AmikoAlienTriplex use folder enigma2
- determine the used filenames like e.g. kernel.bin, rootfs.bin, e2-rootfs.jffs2, e2-kernel.bin or whatever name used and any other file needed to flash.
- names files in the folder enigma2 aren't e2jffs2 .img and ulimage (should be a loader of 2,003 kb)
- you'll have to determine the make and model of the box while running the backupsuite.sh by e.g. cat /proc/stb/info/boxtype (if present or any other way to determine the mark/model) and feed it to $MODEL or manipulate it to suite your needs, or hardcode it with MODEL=<the required name>
OK I update the names of the two variables- for the kernel dump use $NANDDUMP /dev/mtd5 -q > "$WORKDIR/vmlinux.gz"
Yes OK !
If you change the current backupsuite.sh accordingly you would get a whole end may be even without errors but you should test run and report back with the log.
You can change the ET's parts in the backupsuite.sh to test it or use the backupsuite.sh I made for you last may for the Hypercube.
Of course, just finished the test or if there are any mistakes can you please post the log
PS: I have made changes but I get an error on liblzo2.so. 2 library: file too short.I downloaded libraries for SH4 on git for debian, probably there is a problem.Anyway I'll update on developments and to getting things done I am attaching the logs.Thank you for your courtesy
Re: BackupSuite #139
Posted 30 October 2013 - 10:14
Hi Pedro_Newbie,
thanks for your excellent plugin for XP1000.
I noticed a small problem when I looked through my backups. The image version file shows openpli-3.0 when I am backing up openpli-4-0 and it shows the backup date not the image date that is shown in Menu_Information_About
I ask about the date because if I need to go back to and older Image I cant tell from the image-version file how old it is.
Thanks again
Xtrend et8000 7.1-Release
2 x 8/1 DiSEqC 30w 13e 19e 23e 28e
Astrometa USB Tuner Working DVB-T2 now on Kernel 4.10+
WD10EARX 1TB
Sandisk 32GB USB for AFB, EPG, Picons & Timeshift
ZGemma Star S 7.0-Release
4/1 DiSEqC 30w 13e 19e 28e
Sandisk 8GB USB for AFB, EPG, Picons & Timeshift
LG 49UH610V UHD-HDR
UHF/Cable/Sat
E-Channelizer
Re: BackupSuite #140
6 user(s) are reading this topic
0 members, 6 guests, 0 anonymous users