1310 replies to this topic

[pzanone]

I solved it thanks

[WanWizard]

How ?

[pzanone]

unfortunately this team that gave me this image based on pli9 , doesn't have much in the feeds.
so I used an ipk that is found on the various panels..
I added 2 files (overwrite existing file)

/usr/sbin/mkfs.ubifs
/usr/sbin/ubinize

 

 

finally work on h8.2h

 

thanks @WanWizard for your support

 

 

 1_0_19_515_99_217C_EEEE0000_0_0_0_20240130192522.jpg   130.28KB   4 downloads

Edited by pzanone, 30 January 2024 - 21:29.

[WanWizard]

and where did you get those from?

[pzanone]

I tried with the 2 official pli9 files
regards

[didu]

 

/usr/sbin/nanddump openPLi 8.3 --->replace openPLi 9.0

 

Thank you it works perfectly....  

 

I have it this Zgemma H2H. How it solved? Where did you download it from "nanddump openPLi 8.3"?

[s3n0]

unfortunately this team that gave me this image based on pli9 , doesn't have much in the feeds.
so I used an ipk that is found on the various panels..
I added 2 files (overwrite existing file)

/usr/sbin/mkfs.ubifs
/usr/sbin/ubinize

 

 

finally work on h8.2h

 

thanks @WanWizard for your support

 

 

1_0_19_515_99_217C_EEEE0000_0_0_0_20240130192522.jpg

 

 

Hi. Ubinize and mkfs.ubifs are part of a ready-made package of various and multiple tools for working with UBI FS. You probably didn't have it installed... don't know why:

opkg update
opkg install mtd-utils-ubifs

Probably the installation package you used, used for firmware backups, does not contain a note for the requirement to install this package - probably these missing dependencies are not added there - the need to also install the "mtd-utils-ubifs" package.

 

And this package is also included in the OpenPLi 9 feed (2024-oct-05):

----------------------- PACKAGES FOUND: -----------------------
index = 796961, url = http://downloads.openpli.org/feeds/openpli-9-release/mips32el/mtd-utils-ubifs_2.1.2-r0.0_mips32el.ipk
index = 966221, url = http://downloads.openpli.org/feeds/openpli-9-release/armv7ahf-neon/mtd-utils-ubifs_2.1.2-r0.0_armv7ahf-neon.ipk
index = 1094956, url = http://downloads.openpli.org/feeds/openpli-9-release/armv7vehf-neon-vfpv4/mtd-utils-ubifs_2.1.2-r0.0_armv7vehf-neon-vfpv4.ipk
index = 1221804, url = http://downloads.openpli.org/feeds/openpli-9-release/cortexa7hf-vfp/mtd-utils-ubifs_2.1.2-r0.0_cortexa7hf-vfp.ipk
index = 1349634, url = http://downloads.openpli.org/feeds/openpli-9-release/cortexa15hf-neon-vfpv4/mtd-utils-ubifs_2.1.2-r0.0_cortexa15hf-neon-vfpv4.ipk

Edited by s3n0, 5 October 2024 - 09:23.

[Alex_NL]

Backupsuite doesn't work on Xtrend ET10000, develop image.

You have to unplug receiver because 30 minutes after starting Full back-up on HDD it's still creating kerneldump..........................

More than two years later and I come across this same issue.
 

I used Automatic Full Backup until march 2024 to create a backup every night, so that in a event something goes wrong I can go back one day when everything was working.
 

At the moment I have been trying to make a full backup with the automatic full backup plugin and with the Backupsuite plugin.
Tried it on two different USB-sticks and on a Sata-SSD, which I build in this week and was completely initialised after that.

 

All attempts failed and the receiver stops at creating kerneldump.
Sometime I even had to power off the ET10000 to get it working again.

 

I have had the plugins removed and (separately) installed them again.

 

I waited longer than half an hour, once I even kept it running the whole night.

Is there a way to see in a log what's wrong?
Are there other ways to make a full backup?

Attached Files

•  BackupSuite.jpg   85.47KB   0 downloads
•  automaticfullbackup.png   206.41KB   0 downloads

Edited by Alex_NL, Yesterday, 23:52.

[Alex_NL]

Regarding the previous post, this is the information about my receiver and the installed image:

Attached Files

•  information.png   629.31KB   0 downloads

[Dimitrij]

/tmp/BackupSuite.log

[Alex_NL]

The box rebooted, so after that no nog anymore in /tmp
Right before the reboot, this was in /tmp/BackupSuite.log
 

*** THIS BACKUP IS CREATED WITH THE BACKUPSUITE PLUGIN ***
*****  https://github.com/persianpros/BackupSuite-PLi  ******

Plugin version     = 4501eb8
Back-up media      = /hdd
Filesystem                Size      Used Available Use% Mounted on
/dev/sda1               111.3G     10.5G     99.8G  10% /media/hdd

Back-up = 2025.01.08_18:20
Version = openpli 9.1-release 
Flashed = 2024.12.16_01:12
Updated = 2025.01.07_23:20
Drivers = et-dvb-modules-et10000 - 4.10.6+20200402-r0.0
Enigma2 = 2025-01-02 (9.1-release)


Working directory  = /hdd/bi
Not Open Vision, OpenPLi or SatDreamGr maybe?
Destination        = /hdd/fullbackup_et10000/20250108_1820/et10000

RECEIVER = Xtrend ET10000 
MKUBIFS_ARGS = -m 2048 -e 126976 -c 8192
UBINIZE_ARGS = -m 2048 -p 128KiB
KERNEL omvang om te backuppen:   6144 KB
ROOTFS omvang om te backuppen: 297356 KB
=TOTAL omvang om te backuppen: 303500 KB (= 296 MB)
Een ogenblik geduld, de back-up wordt nu gemaakt, dit duurt ongeveer: 20.14 minuten

*** FIRST SOME HOUSEKEEPING ***
Remove directory   = /hdd/bi
Recreate directory = /hdd/bi
Create directory   = /tmp/bi/root

UBINIZE.CFG CREATED WITH THE CONTENT:
[ubifs]
mode=ubi
image=/hdd/bi/root.ubi
vol_id=0
vol_type=dynamic
vol_name=rootfs
vol_flags=autoresize
--------------------------

Maak nu de kerneldump
Kernel resides on mtd1

So, I am not getting wiser out of that.