Posted 27 October 2019 - 18:32
You could go on AUTOREV for BackupSuite again 
It would be ok on PLi's develop but for the newer OE we have this check: https://github.com/O...ckupsuite.sh#L8
I'm not sure how we could detect other branches of PLi.
Open Vision 9.2 is on the master branch of OE which is zeus now but we use our number to detect as we have 7.3 and 9.2 only.
Any idea?
Edited by Persian Prince, 27 October 2019 - 18:33.
Open Vision sources: https://github.com/OpenVisionE2
Posted 27 October 2019 - 22:04
What do you want with the version? In other words, what is different between 6 and 7 (Pyro) and 8 (probably Warrior)?
edit: pinning removed.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 25 January 2020 - 09:43
Good afternoon.Dear Persian Prince.Please correct your plugin,there are a lot of errors in the log and there is no backup final.This was tested on thud and warrior branch.
1_0_16_67_1_70_1680000_0_0_0_20200124230739.jpg 121.42KB
8 downloads
BackupSuite.log 7KB
12 downloads
Posted 30 January 2020 - 18:40
Good afternoon.Dear Persian Prince.Please correct your plugin,there are a lot of errors in the log and there is no backup final.This was tested on thud and warrior branch.
I support the request
GI ET11000,Vu+DUO2 - 4W-90E Supral 120 (motor Stab HH 120), 36Е- satellite antenna Nokia - 90
xtrend ET9000 - Tests without a permanent connection
Posted 31 January 2020 - 12:17
Good afternoon.Dear Persian Prince.Please correct your plugin,there are a lot of errors in the log and there is no backup final.This was tested on thud and warrior branch.
I support the request
Dear Persian Prince, I back the request up! Thanks in advance
Posted 31 January 2020 - 12:52
Guys the problem is because of recent multilib changes and we're investigating it.
ls command problem solved for all images (was ok for Open Vision but not recent custom builds like PLi develop ...)
And report problems here: https://github.com/O...kupSuite/issues
Check the new version if you can compile from the sources.
Open Vision sources: https://github.com/OpenVisionE2
Posted 31 January 2020 - 17:04
Thank you so much. Now everything works without problems.
screenshot_19700101010527.jpg 64.31KB
17 downloads
Posted 17 July 2020 - 07:57
sorry my english, zgemma h9 combo openpli 7.3 stable, backupsuite gives me error: / usr / lib / enigma2 / python / Plugins / Extensions / BackupSuite sh line 275 arithmetic syntax error
Edited by WanWizard, 1 August 2020 - 12:08.
fixed font formatting
Posted 1 August 2020 - 12:03
sorry my english, zgemma h9 combo openpli 7.3 stable, backupsuite gives me error: / usr / lib / enigma2 / python / Plugins / Extensions / BackupSuite sh line 275 arithmetic syntax error
OpenPLi 7.3 stable on Zgemma H9.2H error : bad orphan LEB count '128KiB'
Edited by WanWizard, 1 August 2020 - 12:09.
fixed font formatting
Posted 27 August 2020 - 17:12
sorry my english, zgemma h9 combo openpli 7.3 stable, backupsuite gives me error: / usr / lib / enigma2 / python / Plugins / Extensions / BackupSuite sh line 275 arithmetic syntax error
On my Zgemma H9 combo I obtain directly the message " No supported decoder has been found"! And the backup doesn't start
How is possible? In the release notes I see that H9 combo is supported
Posted 28 August 2020 - 10:53
There are two versions of Backup Suite:
- New generation (develop branch): Currently only works on Open Vision images as we have some dedicated files to check the needed things in a smart way, Backup Suite NG doesn't have any "lookuptable.txt" or dirty hacks to detect STBs.
- Old generation (master branch): Available for all images but without any maintainer for now as I don't work on old generation anymore so PRs are welcome or if anyone wants to work on master branch let me know for write access.
NG version doesn't care what model you have or might have in future as it detects things via other files and not defined tables.
Sources: https://github.com/O...nE2/BackupSuite
Edited by Persian Prince, 28 August 2020 - 10:54.
Open Vision sources: https://github.com/OpenVisionE2
Posted 28 August 2020 - 11:38
.... hardly user friendly.
test
Posted 28 August 2020 - 14:08
Bad news.... so in the future backupsuite will be an exclusive for Open Vision Image or you do you think that will be compatible in the future also for openPLI?
However I've read that someone with H9 has realized a backup with your plugin here on openPLI forum
Edited by pec0sat, 28 August 2020 - 14:09.
Posted 28 August 2020 - 14:59
Tried to backup now that I've solved the problems with my receiver but notging to do.
In backupsuite.log file I read that:
*** THIS BACKUP IS CREATED WITH THE BACKUPSUITE PLUGIN *** ***** https://github.com/OpenVisionE2/BackupSuite ****** Plugin version = git504+9967f99 Back-up media = /media/usb Filesystem Size Used Available Use% Mounted on /dev/sda1 3.9G 95.4M 3.8G 2% /media/usb Back-up = 2020.08.28_15:48 Version = openpli 7.3-release Flashed = 2020.08.24_01:00 Updated = 2020.08.28_15:47 Drivers = zgemma-dvb-modules-h9combo - 4.4.35-20200720-r0.0 Enigma2 = 2020-08-21-release-7.3 Working directory = /media/usb/bi Not Open Vision, OpenPLi or SatDreamGr maybe? Non è stato trovato nessun ricevitore supportato! Creazione dell'immagine FALLITA!
No supported receiver was found
But I read also:
Not Open Vision, OpenPLi or SatDreamGr maybe?
I'm confused... the problem is the image or the receiver? And if is the image... I read that OpenPLi should be supported 
Edited by pec0sat, 28 August 2020 - 14:59.
Posted 28 August 2020 - 15:05
I think it's saying your box is not Open Vision, but maybe is OpenPLi or SatDreamGr.
The key word in post #1113 is "Currently" - "Currently only works on Open Vision images....", but not much use to you at the moment.
test
Posted 28 August 2020 - 16:47
pec0sat, on 28 Aug 2020 - 17:38, said:
Bad news.... so in the future backupsuite will be an exclusive for Open Vision Image or you do you think that will be compatible in the future also for openPLI?
However I've read that someone with H9 has realized a backup with your plugin here on openPLI forum
Open Vision sources: https://github.com/OpenVisionE2
Posted 28 August 2020 - 16:57
Tried to backup now that I've solved the problems with my receiver but notging to do.
In backupsuite.log file I read that:
*** THIS BACKUP IS CREATED WITH THE BACKUPSUITE PLUGIN *** ***** https://github.com/OpenVisionE2/BackupSuite ****** Plugin version = git504+9967f99 Back-up media = /media/usb Filesystem Size Used Available Use% Mounted on /dev/sda1 3.9G 95.4M 3.8G 2% /media/usb Back-up = 2020.08.28_15:48 Version = openpli 7.3-release Flashed = 2020.08.24_01:00 Updated = 2020.08.28_15:47 Drivers = zgemma-dvb-modules-h9combo - 4.4.35-20200720-r0.0 Enigma2 = 2020-08-21-release-7.3 Working directory = /media/usb/bi Not Open Vision, OpenPLi or SatDreamGr maybe? Non è stato trovato nessun ricevitore supportato! Creazione dell'immagine FALLITA!No supported receiver was found
But I read also:
Not Open Vision, OpenPLi or SatDreamGr maybe?
I'm confused... the problem is the image or the receiver? And if is the image... I read that OpenPLi should be supported
There's no code in Backup Suite to block the plugin from running on other images, that message tells you're using an image which isn't OV so the check files are different.
The old generation of Backup Suite uses hard-coded values and pre-defined tables to detect your model so seems it can't detect your model and I think it's because of the new drivers which ruined almost every check, example: https://github.com/E...83c924c422116e5
So don't blame me as there's no single reliable company in enigma2 scene with APIs and drivers.
The reason we have our own model detection in Open Vision is exactly that we don't care what companies advertise as model name, we do what we think is better for all of our sources.
Regards,
Persian Prince
Open Vision sources: https://github.com/OpenVisionE2
Posted 28 August 2020 - 17:32
You can't expect me to maintain something I don't use.
Regards,
Persian Prince
Crikey, hopefully you're the only one with that attitude.
test
Posted 28 August 2020 - 17:54
Sorr
Tried to backup now that I've solved the problems with my receiver but notging to do.
In backupsuite.log file I read that:
*** THIS BACKUP IS CREATED WITH THE BACKUPSUITE PLUGIN *** ***** https://github.com/OpenVisionE2/BackupSuite ****** Plugin version = git504+9967f99 Back-up media = /media/usb Filesystem Size Used Available Use% Mounted on /dev/sda1 3.9G 95.4M 3.8G 2% /media/usb Back-up = 2020.08.28_15:48 Version = openpli 7.3-release Flashed = 2020.08.24_01:00 Updated = 2020.08.28_15:47 Drivers = zgemma-dvb-modules-h9combo - 4.4.35-20200720-r0.0 Enigma2 = 2020-08-21-release-7.3 Working directory = /media/usb/bi Not Open Vision, OpenPLi or SatDreamGr maybe? Non è stato trovato nessun ricevitore supportato! Creazione dell'immagine FALLITA!No supported receiver was found
But I read also:
Not Open Vision, OpenPLi or SatDreamGr maybe?
I'm confused... the problem is the image or the receiver? And if is the image... I read that OpenPLi should be supported
There's no code in Backup Suite to block the plugin from running on other images, that message tells you're using an image which isn't OV so the check files are different.
The old generation of Backup Suite uses hard-coded values and pre-defined tables to detect your model so seems it can't detect your model and I think it's because of the new drivers which ruined almost every check, example: https://github.com/E...83c924c422116e5
So don't blame me as there's no single reliable company in enigma2 scene with APIs and drivers.
The reason we have our own model detection in Open Vision is exactly that we don't care what companies advertise as model name, we do what we think is better for all of our sources.
Regards,
Persian Prince
When I think of how many receivers both OpenATV & OpenViX backup with their (different) image backup software I find it difficult to understand your point of view
Gigablue Quad 4K & UE 4K, Vu+Uno4KSE, DM900
.........FBC Tuners:
------------------> GT-SAT unicable lnb to 1.5M dish(28.2E)
------------------> Gigablue unicable lnb to 80 cm dish(19.2E)
Octagon sf8008, AX HD61, Edision Osmio 4K+, Zgemma H9Combo using Legacy ports on multiswitches
Zgemma H9twin & Zgemma H9 C/S mode into Giga4K
Posted 28 August 2020 - 18:15
Sorr
Tried to backup now that I've solved the problems with my receiver but notging to do.
In backupsuite.log file I read that:
*** THIS BACKUP IS CREATED WITH THE BACKUPSUITE PLUGIN *** ***** https://github.com/OpenVisionE2/BackupSuite ****** Plugin version = git504+9967f99 Back-up media = /media/usb Filesystem Size Used Available Use% Mounted on /dev/sda1 3.9G 95.4M 3.8G 2% /media/usb Back-up = 2020.08.28_15:48 Version = openpli 7.3-release Flashed = 2020.08.24_01:00 Updated = 2020.08.28_15:47 Drivers = zgemma-dvb-modules-h9combo - 4.4.35-20200720-r0.0 Enigma2 = 2020-08-21-release-7.3 Working directory = /media/usb/bi Not Open Vision, OpenPLi or SatDreamGr maybe? Non è stato trovato nessun ricevitore supportato! Creazione dell'immagine FALLITA!No supported receiver was found
But I read also:
Not Open Vision, OpenPLi or SatDreamGr maybe?
I'm confused... the problem is the image or the receiver? And if is the image... I read that OpenPLi should be supported
There's no code in Backup Suite to block the plugin from running on other images, that message tells you're using an image which isn't OV so the check files are different.
The old generation of Backup Suite uses hard-coded values and pre-defined tables to detect your model so seems it can't detect your model and I think it's because of the new drivers which ruined almost every check, example: https://github.com/E...83c924c422116e5
So don't blame me as there's no single reliable company in enigma2 scene with APIs and drivers.
The reason we have our own model detection in Open Vision is exactly that we don't care what companies advertise as model name, we do what we think is better for all of our sources.
Regards,
Persian Prince
When I think of how many receivers both OpenATV & OpenViX backup with their (different) image backup software I find it difficult to understand your point of view
What's the relation between my post and ViX or ATV?
I have no intention to support those images and they have their own backup tools, there are some similarities between Open Vision and SatDreamGr because of the PLi's enigma2 and also our OEs which are not similar to OE-A
Did you even read the above posts? Some users want to run old generation of Backup Suite on hardwares with new drivers and their box won't get detected so how is it related to ViX or ATV?
I'm getting tired of seeing posts getting captured to mention OE-A images are better in everyway, ok they're better so good for you.
Edited by Persian Prince, 28 August 2020 - 18:19.
Open Vision sources: https://github.com/OpenVisionE2
0 members, 0 guests, 0 anonymous users
