Hi,
what is the best way to do the full image backup on DM8000 ?
Thanks
13 replies to this topic
Re: NFI image backup? #2
-
- Senior Member
- 167 posts
+1
Neutral
Posted 7 February 2012 - 22:30
dflash from gutemine.
cu
KJ
cu
KJ
Re: NFI image backup? #3
-
- Senior Member
- 169 posts
0
Neutral
Posted 8 February 2012 - 07:32
Hi,
thanks for the info. I've been using this in the past but when it come to flash the image back, the box was not responsive after reboot (was like shutting off itself after few seconds of boot up). This was v 0.9 thou. Now I've found v2.3, installed and did the backup. Will see when it comes to restore... hopefuly it will work
thanks for the info. I've been using this in the past but when it come to flash the image back, the box was not responsive after reboot (was like shutting off itself after few seconds of boot up). This was v 0.9 thou. Now I've found v2.3, installed and did the backup. Will see when it comes to restore... hopefuly it will work
Re: NFI image backup? #4
-
- Senior Member
- 61 posts
+5
Neutral
Posted 9 February 2012 - 01:35
@mbo
default it will NOT restore
Before you make a backup add the following line to tthe following file: /etc/fstab
/dev/mtdblock2 /boot jffs2 defaults 0 0
ORIGINAL PLI fstab looks like:
rootfs / auto defaults 1 1
proc /proc proc defaults 0 0
devpts /dev/pts devpts mode=0620,gid=5 0 0
usbfs /proc/bus/usb usbfs defaults 0 0
tmpfs /var/volatile tmpfs defaults 0 0
MODIFIED FOR DFLASH:
rootfs / auto defaults 1 1
proc /proc proc defaults 0 0
devpts /dev/pts devpts mode=0620,gid=5 0 0
usbfs /proc/bus/usb usbfs defaults 0 0
/dev/mtdblock2 /boot jffs2 ro 0 0
tmpfs /var/volatile tmpfs defaults 0 0
Latest DFLASH version 2.2 for Enigma2:
default it will NOT restore
Before you make a backup add the following line to tthe following file: /etc/fstab
/dev/mtdblock2 /boot jffs2 defaults 0 0
ORIGINAL PLI fstab looks like:
rootfs / auto defaults 1 1
proc /proc proc defaults 0 0
devpts /dev/pts devpts mode=0620,gid=5 0 0
usbfs /proc/bus/usb usbfs defaults 0 0
tmpfs /var/volatile tmpfs defaults 0 0
MODIFIED FOR DFLASH:
rootfs / auto defaults 1 1
proc /proc proc defaults 0 0
devpts /dev/pts devpts mode=0620,gid=5 0 0
usbfs /proc/bus/usb usbfs defaults 0 0
/dev/mtdblock2 /boot jffs2 ro 0 0
tmpfs /var/volatile tmpfs defaults 0 0
Latest DFLASH version 2.2 for Enigma2:
Attached Files
-
dflash_2.2_mipsel.zip 566.92KB
97 downloads
Edited by Tuurtje, 9 February 2012 - 01:38.
Re: NFI image backup? #6
-
- Senior Member
- 169 posts
0
Neutral
Posted 18 February 2012 - 03:20
One more question, the string is bit different than the one in the example. The ro parameter exist in the example file. Does it make a difference which one I use?
Thanks.
Thanks.
Re: NFI image backup? #7
-
- Senior Member
- 169 posts
0
Neutral
Posted 18 February 2012 - 04:09
For interested, newer dflash version and instructions attached.
Cheers
Cheers
Attached Files
-
enigma2-plugin-extensions-dflash_2.8_mipsel.rar 565.83KB
38 downloads
-
Instructions for dflash.pdf.rar 1.85MB
122 downloads
Re: NFI image backup? #8
-
- Senior Member
- 61 posts
+5
Neutral
Posted 25 February 2012 - 07:16
DFLASH 2.9
Attached Files
-
enigma2-plugin-extensions-dflash_2.9_mipsel.ipk 565.74KB
62 downloads
-
Anleitung für dflash 2.9.pdf 2.04MB
87 downloads
Re: NFI image backup? #9
-
- Senior Member
- 3,000 posts
+51
Good
Posted 25 February 2012 - 08:05
thanks
Edited by Meega, 25 February 2012 - 08:05.
ET10000+ Openpli 6.1,1m schotel 4x duo-lnb op vaste opstelling.
Momolights teensy 2.0 met 50 leds op een string ,150 channels
DM8000 Openpli 6.1 Release
Re: NFI image backup? #10
-
- Senior Member
- 169 posts
0
Neutral
Posted 18 March 2012 - 03:32
Dflash 2.10
Attached Files
-
enigma2-plugin-extensions-dflash_2.10_mipsel.rar 565.66KB
101 downloads
Re: NFI image backup? #11
-
- Member
- 11 posts
0
Neutral
Posted 18 March 2012 - 22:07
DM600 - DM7025 - DM800 - DM8000 - DM800SE - VU+DUO
Re: NFI image backup? #12
-
- Senior Member
- 2,074 posts
+11
Neutral
Posted 7 April 2012 - 14:49
Link doesn't work?Hi,
Original Gutemin's post just here :
Direct Flash - Forum OoZooN
Edited by Lexzie, 7 April 2012 - 14:49.
Dreambox DM920:2x Triple tuner (2x DVB-S2X MIS and DVB-C/T2) Xtrend ET10000: 2x DVB-S2, 2x DVB-C, IPTV Xtrend ET9500 (defect)
Channel Master 120cm offset + Black Ultra LNB (Ku-band): 42°E-37,5°W - 100cm SAB draaibaar: 45.1°E-60°E - 80cm vast: 28.2°E/23.5°E/19.2°E/13°E
DVB-T2 en DAB via een combi VHF/UHF-antenne op zolder gericht op Schoten.
Re: NFI image backup? #13
-
- Member
- 1 posts
0
Neutral
Posted 28 April 2015 - 13:38
Hi,
what is the best way to do the full image backup on DM8000 ?
Thanks
Hi man,
Did you solve the problem with the full image on Dm8000 ?
How did you make it ?, Thanks
Re: NFI image backup? #14
-
- Senior Member
- 1,030 posts
+14
Neutral
Posted 29 April 2015 - 16:47
Remember this was a reply on a posting from 2012! A lot has changed and the 'good old' dFlash has reached version 13.6. As of version 12.6 the build in time bomb has been eleviated. The plugin dFlash however can't be installed on OpenPli 4.0 due to some dependancies. Use the Athoik Dream-Fullbackup.sh to install these files. Next install dFlash 12.6 or higher. Works like a charm...
Also tagged with one or more of these keywords: DM8000
Dreambox crashed bij starten opnameStarted by tajvdz, 3 Feb 2024  DM8000
|
|
|
||
Strange mount problemStarted by stdemonac, 21 Jan 2021 DM8000, mount
|
|
|
||
Openpli on Dreambox picture and sound freezesStarted by arkovda, 4 Apr 2020 dm8000, enigma, picture freeze and 2 more...
|
|
|
||
DM8000 Flashen lukt nietStarted by Fightingarts, 16 Jan 2020 DM8000, Flashen
|
|
|
||
DM8000 OpenPli 6.2Started by mimisiku, 5 Jan 2019 dm8000, opnames
|
|
|
2 user(s) are reading this topic
0 members, 2 guests, 0 anonymous users
