you should use the blindscan from the feed, no more need for an external ipk
73 replies to this topic
Re: Improved version of blind scan for ET9x00 only #61
-
- PLi® Core member
- 32,766 posts
+245
Excellent
Posted 15 November 2012 - 15:26
Re: Improved version of blind scan for ET9x00 only #62
-
- Senior Member
- 448 posts
+10
Neutral
Posted 23 December 2012 - 09:16
you should use the blindscan from the feed, no more need for an external ipk
For some strange reason blindscan does not show up anywhere in the list when I try to install it on my et9500.
Re: Improved version of blind scan for ET9x00 only #63
-
- PLi® Core member
- 10,331 posts
+350
Excellent
Posted 23 December 2012 - 09:38
tryyou should use the blindscan from the feed, no more need for an external ipk
For some strange reason blindscan does not show up anywhere in the list when I try to install it on my et9500.
GigaBlue UHD Quad 4K /Lunix3-4K/Duo 4K
Re: Improved version of blind scan for ET9x00 only #64
-
- PLi® Core member
- 57,187 posts
+699
Excellent
Posted 23 December 2012 - 10:29
An ipk from the forum is not from our feeds???
WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W
Re: Improved version of blind scan for ET9x00 only #65
-
- PLi® Core member
- 10,331 posts
+350
Excellent
Posted 23 December 2012 - 11:33
I found it hereAn ipk from the forum is not from our feeds???
https://github.com/o...aster/Blindscan
And passed the dependency in file control:
original - Depends: enigma2, virtual/blindscan-dvbs
my version - Depends: enigma2, et-blindscan-dvbs-utils
GigaBlue UHD Quad 4K /Lunix3-4K/Duo 4K
Re: Improved version of blind scan for ET9x00 only #66
-
- PLi® Contributor
- 4,663 posts
+163
Excellent
Posted 23 December 2012 - 16:26
How do you like it?I found it here
An ipk from the forum is not from our feeds???
https://github.com/o...aster/Blindscan
And passed the dependency in file control:
original - Depends: enigma2, virtual/blindscan-dvbs
my version - Depends: enigma2, et-blindscan-dvbs-utils
Re: Improved version of blind scan for ET9x00 only #67
-
- PLi® Core member
- 10,331 posts
+350
Excellent
Posted 23 December 2012 - 18:03
I have not changed any byte code in this plugin.How do you like it?
Than you unhappy?
I thought that all of these additions are made to users, and is absolutely free, because of a hobby.
I also made a few plugins and another image using them under another name.
And that cry now?
GigaBlue UHD Quad 4K /Lunix3-4K/Duo 4K
Re: Improved version of blind scan for ET9x00 only #68
-
- PLi® Contributor
- 4,663 posts
+163
Excellent
Posted 23 December 2012 - 19:27
Not at all. Was just asking because it was me that rewrote it with those features.I have not changed any byte code in this plugin.
How do you like it?
Than you unhappy?
Re: Improved version of blind scan for ET9x00 only #69
-
- Senior Member
- 2,621 posts
+30
Good
Posted 27 February 2013 - 23:02
Hi,
After getting a used ET9000, I found there is no blindscan installed on the box? Or am I blind (excuse the pun)? Where do I look for it in the menu?
Also, after readinf this therad, I can see there are 2 versions of blindscan. Do they both work correctly on motorized installation?
I am a little confused but I would love to give it a try.
Is it possible to install the other one too so that I could compare them and use the one that suits me better?
After getting a used ET9000, I found there is no blindscan installed on the box? Or am I blind (excuse the pun)? Where do I look for it in the menu?
Also, after readinf this therad, I can see there are 2 versions of blindscan. Do they both work correctly on motorized installation?
I am a little confused but I would love to give it a try.
I understand it is one of the two versions described in this topic? Whose?you should use the blindscan from the feed, no more need for an external ipk
Is it possible to install the other one too so that I could compare them and use the one that suits me better?
ET9000, OpenPLi 4.0, 13E, 19E
HD51, OpenPLi 6.2, 75E - 30W
Re: Improved version of blind scan for ET9x00 only #70
-
- Senior Member
- 2,621 posts
+30
Good
Posted 28 February 2013 - 14:13
I have installed the one from the feed (OpenPLi 3.0) but it does not seem to show up anywhere in the menu.
I guess I will try the file attached by Dima73 above.
Or is it only for 2.1?
I guess I will try the file attached by Dima73 above.
Or is it only for 2.1?
ET9000, OpenPLi 4.0, 13E, 19E
HD51, OpenPLi 6.2, 75E - 30W
Re: Improved version of blind scan for ET9x00 only #71
-
- PLi® Core member
- 57,187 posts
+699
Excellent
Posted 28 February 2013 - 15:22
In the manual scan menu you can select for blindscan....
WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W
Re: Improved version of blind scan for ET9x00 only #72
-
- PLi® Core member
- 10,331 posts
+350
Excellent
Posted 28 February 2013 - 15:59
def BlindscanSetup(menuid, **kwargs):
if menuid == "scan":
return [(_("Blind Scan"), main, "blindscan", None)]
if menuid == "scan":
return [(_("Blind Scan"), main, "blindscan", None)]
GigaBlue UHD Quad 4K /Lunix3-4K/Duo 4K
Re: Improved version of blind scan for ET9x00 only #73
-
- Senior Member
- 2,621 posts
+30
Good
Posted 28 February 2013 - 23:52
OK, so this is your version, Huevos?How do you like it?
I found it here
https://github.com/o...aster/Blindscan
And passed the dependency in file control:
original - Depends: enigma2, virtual/blindscan-dvbs
my version - Depends: enigma2, et-blindscan-dvbs-utils
Because, as I understand, there is also another one - by rhinoceros.
Would you still work on it if any bugs were to be found or any improvements suggested?
ET9000, OpenPLi 4.0, 13E, 19E
HD51, OpenPLi 6.2, 75E - 30W
Re: Improved version of blind scan for ET9x00 only #74
-
- PLi® Contributor
- 4,663 posts
+163
Excellent
Posted 1 March 2013 - 10:56
Bugs that are not caused by hardware or drivers, yes of course. Improvements/ideas are open to discussion.Would you still work on it if any bugs were to be found or any improvements suggested?
Also tagged with one or more of these keywords: ET9X00
Et9x00
Et9x00 Pctv 290e dvb-usb-em28xx error driverStarted by viagra99, 18 Mar 2016  Et9x00, dvb-usb-em28xx, Pctv 290e
|
|
|
||
zender toevoegen aan favourites (TV) lukt nietStarted by Lutz, 31 Jan 2016 et9x00
|
|
|
||
et9x00 herinstallerenStarted by Lutz, 17 Dec 2015 et9x00
|
|
|
||
openpli4 , ET9X00, kanaallijsten worden dubbel geladenStarted by brijdec, 28 Jun 2015 kanaallijsten dubbel, ET9X00 and 1 more...
|
|
|
||
OpenWebif kan niet streamen naar Windows Media PlayerStarted by rhinoceros, 16 May 2015 ET9x00
|
|
|
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
