1943 replies to this topic

[MrA]

OK after much editing I have it mostly sorted

 

BBC2 for my VU+ is 

 

4440:0cfdace7:1000:0001:25:0
BBC Two HD
p:BBC,c:0017d5,c:0317d5,c:1217d6,c:050001,c:0917d90101,C:2600,f:05

 

So just the difference from f:400 and f:05 sorted it

 

Just have to sort Red Button and Film4+1 and CBBC

 

Many thanks for your help
 

[BBC-Hörer]

OK after much editing I have it mostly sorted

 

BBC2 for my VU+ is 

 

p:BBC,c:0017d5,c:0317d5,c:1217d6,c:050001,c:0917d90101,C:2600,f:05

 

 

That is why i sent you the settings to get familar with the flags to be used: C:2600 as one of the most important flags.

[lacierva]

so after upgrading my vusolo2 to openpli 7.1 cant seem to get 27w working again, i have oscam-emu running and edited the lamedb but nothing, i can see the emulater working on other sats arena sports for example, so i cant be far off, is there any problem with this new buld of 7.1, can anyone post a config for oscam-emu as i might be missing something, thanks all

[lacierva]

hi all,

can anyone post an example of oscam dvapi file for oscam-emu please ? 27w

[jpuigs]

I have no oscam dvbapi file, and I use oscam, not oscam-emu.

 

Your BBC News lamedb entry is as follows ?

1100:0cfdace7:1000:0001:1:0:0
BBC NEWS
p:BBC,c:0001f5,c:0101f6,c:0301f5,c:1601f4,C:2600,f:401

Edited by jpuigs, 1 July 2019 - 20:40.

[lacierva]

i have all the lamedb entrys, but i was led to believe in oscam-emu the dvapi file also needs config

[lacierva]

or if anyone has it working on a older open pli and oscam-emu , i would go back to a previous version,

[twol]

i have all the lamedb entrys, but i was led to believe in oscam-emu the dvapi file also needs config

I just have the following:

1. constant.cw
2. modded lamedb
3. oscam.server with added BISS reader that uses the constant.cw :-

[lacierva]

 

i have all the lamedb entrys, but i was led to believe in oscam-emu the dvapi file also needs config

I just have the following:

1. constant.cw
2. modded lamedb
3. oscam.server with added BISS reader that uses the constant.cw :-

 

but are you using oscam-emu or just oscam ?

[twol]

i have all the lamedb entrys, but i was led to believe in oscam-emu the dvapi file also needs config

I just have the following:
1. constant.cw
2. modded lamedb
3. oscam.server with added BISS reader that uses the constant.cw :-

but are you using oscam-emu or just oscam ?

Oscam

[lacierva]

 

I don't understand why people use oscam-ymod-vxxxxx .

You can use a standard Oscam emu, and simply add a BISS (cw) reader and a flag on lamedb file, C:2600

[reader]
label                         = BISS
protocol                      = constcw
device                        = /etc/tuxbox/config/constant.cw
caid                          = 2600
group                         = 1

constant.cw:

2600:000000:1100:01F4:1FFF::XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX ;BeeBeeCee N
2600:000000:1044:0064:1FFF::XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX ;BeeBeeCee 1
....
 

bud, can you post your configs or send me a pm if you have this running with oscam-emu , i seem to hitting a brick wall trying to configure this with latest 7.1

[twol]

I don't understand why people use oscam-ymod-vxxxxx .
You can use a standard Oscam emu, and simply add a BISS (cw) reader and a flag on lamedb file, C:2600

[reader]label                         = BISSprotocol                      = constcwdevice                        = /etc/tuxbox/config/constant.cwcaid                          = 2600group                         = 1

constant.cw:

2600:000000:1100:01F4:1FFF::XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX ;BeeBeeCee N2600:000000:1044:0064:1FFF::XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX ;BeeBeeCee 1....

bud, can you post your configs or send me a pm if you have this running with oscam-emu , i seem to hitting a brick wall trying to configure this with latest 7.1

You have everything you need in your own post the constant.cw, the BISS reader that goes in oscam.server and I assume you have a correct lamedb that plus normal Oscam is all you need ... what else are you after.??

Edited by twol, 2 July 2019 - 20:58.

[lacierva]

 

 

I don't understand why people use oscam-ymod-vxxxxx .
You can use a standard Oscam emu, and simply add a BISS (cw) reader and a flag on lamedb file, C:2600

[reader]label                         = BISSprotocol                      = constcwdevice                        = /etc/tuxbox/config/constant.cwcaid                          = 2600group                         = 1

constant.cw:

2600:000000:1100:01F4:1FFF::XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX ;BeeBeeCee N2600:000000:1044:0064:1FFF::XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX ;BeeBeeCee 1....

bud, can you post your configs or send me a pm if you have this running with oscam-emu , i seem to hitting a brick wall trying to configure this with latest 7.1

You have everything you need in your own post the constant.cw, the BISS reader that goes in oscam.server and I assume you have a correct lamedb that plus normal Oscam is all you need ... what else are you after.??

 

the post from jupuigs says he dont understand why people use oscamymod, just use oscam-emu, thats why im asking, i know i can do it on oscamymod as i had it running for the last 2 years,

Edited by lacierva, 2 July 2019 - 21:06.

[lacierva]

 

I don't understand why people use oscam-ymod-vxxxxx .

You can use a standard Oscam emu, and simply add a BISS (cw) reader and a flag on lamedb file, C:2600

[reader]
label                         = BISS
protocol                      = constcw
device                        = /etc/tuxbox/config/constant.cw
caid                          = 2600
group                         = 1

constant.cw:

2600:000000:1100:01F4:1FFF::XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX ;BeeBeeCee N
2600:000000:1044:0064:1FFF::XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX ;BeeBeeCee 1
....
 

so why did you post this on page 65 if you only use oscam ???????????????????

[lacierva]

seem i have confused jpuigs  oscam emu as oscam-emu, he was talking standard oscam, sorry chaps

[jpuigs]

I use Oscam.

 

Same configuration as twol:

 

1. keys in constant.cw in a server with added BISS reader
2. modified lamedb

Edited by jpuigs, 2 July 2019 - 22:35.

[twol]

I have just tried updating my oscam and found to my consternation that protocol  constcw is no longer a default is the Oscam build.

Does anyone know how to add it into the build? I have tried building using simplebuild for oscam , but doesn't build an image that starts for me.

Apparently you need to add ./config.sh --enable MODULE_CONSTCW

Edited by twol, 24 July 2019 - 20:50.

[littlesat]

Add the keys in SoftCam.Key instead and use Oscam-emu...

Edited by littlesat, 27 July 2019 - 09:56.

[twol]

Add the keys in SoftCam.Key instead and use Oscam-emu...

I edited the config file so can build with constcw ....... much easier ......... at least for me!

Edited by twol, 27 July 2019 - 10:43.

[littlesat]

I think adding the keys to SoftCam.Key is much easier...