if it's of any help to anyone i have a fully working solo 2 image for 27.5w if you are interested PM me your welcome to it..
Enigma2 and BBC/ITV at 27.5W Intelsat - a big challenge
Re: Enigma2 and BBC/ITV at 27.5W Intelsat - a big challenge #1581
Re: Enigma2 and BBC/ITV at 27.5W Intelsat - a big challenge #1582
Posted 14 November 2019 - 09:10
Tested and success! Here is whole instructions to work all!
finally success with Dreambox 920UHDimage DreamElite 6 latest OE2.5oscam 11546 emu7981. in Menu - Setup Network WebInterface"disable anti-hijacking and token-based security in web interface settings" (big thank you again @matt33 and @Rickk)2. (all files with permission 755) create the bbc.service file in /etc/systemd/systeminsert that[Unit]Description = BBC service[Service]ExecStart = /usr/bin/bbc_pmt_v6.py -t short -d /dev/dvb/adapter0/demux0[Install]WantedBy = multi-user.target3.copy all 3 files from bbc_pmt_v6.rar to usr/bin (all files with permission 755)4. with command (Telnet, you can use DCC) activate service with:systemctl enable bbc.service5. edit oscam.dvbapi file (in etc/tuxbox/config), file attached below6. with command (Telnet) init 4 stop Enigma, replace with lamedb (from attachment), init 3 and reboot...also be sure in oscam.confpmt_mode = 0
Hi could some one help me out with this please i am not too great with this stuff so it needs to be simple (like me LOL)
My bbox is a VU+ SOLO 2
i did "copy all 3 files from bbc_pmt_v6.rar to usr/bin (all files with permission 755) "
i also copied new Lamebd making sure i did the init 4 and then init 3
The oscam.dvbapi file (in etc/tuxbox/config),
i tried to do the systemctl enable bbc.service but that failed with this..i didn't quite understand that bit..
now when i try to boot i get nothing
just the message "service unavailable check tuner configuration... ???
so i am stuck at the moment any ideas please?
i am back now without those files in and working on Oscam Emu with 30w so can someone explain how i get 27.5w to work as well please on my solo 2 thanks
Attached Files
VU+ Solo 4K .VU+ Solo 2 X 2 With OpenPLi 8.3 x 3 2 in use other a test bed Synology ds-118
ASUS NITRO AN517-52 .i7 1075h with GTX 1660 Ti
Re: Enigma2 and BBC/ITV at 27.5W Intelsat - a big challenge #1583
Posted 14 November 2019 - 12:02
May or may not be of interest to you, but I have 27.5w working on several closed source boxes, but more recently, have successfully got 27.5w working on 2 Linux open source boxes (Zgemma 7 & Edision Nino Pro) both running Openvix (with Latest Oscam-Emu on Zgemma & CCcam on Edision) helped along the way by TWOL and others. The latest various images don't seem to be as complicated as the earlier fixes in this thread were.
Re: Enigma2 and BBC/ITV at 27.5W Intelsat - a big challenge #1584
Posted 14 November 2019 - 12:05
May or may not be of interest to you, but I have 27.5w working on several closed source boxes, but more recently, have successfully got 27.5w working on 2 Linux open source boxes (Zgemma 7 & Edision Nino Pro) both running Openvix (with Latest Oscam-Emu on Zgemma & CCcam on Edision) helped along the way by TWOL and others. The latest various images don't seem to be as complicated as the earlier fixes in this thread were.
i dont understand what to do because this is for a different box to mine....... i wnat it to work with Oscam Emu so i can rung BISS and other stuff like CCcam
VU+ Solo 4K .VU+ Solo 2 X 2 With OpenPLi 8.3 x 3 2 in use other a test bed Synology ds-118
ASUS NITRO AN517-52 .i7 1075h with GTX 1660 Ti
Re: Enigma2 and BBC/ITV at 27.5W Intelsat - a big challenge #1585
Posted 14 November 2019 - 12:36
My Zgemma box is an ARM processor (using OSCAM-EMU) and the Edision is a Mips processor (using CCcam). The Edision may work on OSCAM-EMU but I already had it set up with CCcam and haven't bothered to change it. Both only used to receive the BISS channels on 27.5w. I have a ZIP file with the info & files inside if you think you can make use of it.
Re: Enigma2 and BBC/ITV at 27.5W Intelsat - a big challenge #1586
Re: Enigma2 and BBC/ITV at 27.5W Intelsat - a big challenge #1587
Posted 14 November 2019 - 22:06
My Zgemma box is an ARM processor (using OSCAM-EMU) and the Edision is a Mips processor (using CCcam). The Edision may work on OSCAM-EMU but I already had it set up with CCcam and haven't bothered to change it. Both only used to receive the BISS channels on 27.5w. I have a ZIP file with the info & files inside if you think you can make use of it.
My Zgemma box is an ARM processor (using OSCAM-EMU) and the Edision is a Mips processor (using CCcam). The Edision may work on OSCAM-EMU but I already had it set up with CCcam and haven't bothered to change it. Both only used to receive the BISS channels on 27.5w. I have a ZIP file with the info & files inside if you think you can make use of it.
Thanks bud but i am sorted now all going well apart from a couple of channels not having sound it's usually the HD channels but this time it normal ones oh an more 4+1 and film 4+1
VU+ Solo 4K .VU+ Solo 2 X 2 With OpenPLi 8.3 x 3 2 in use other a test bed Synology ds-118
ASUS NITRO AN517-52 .i7 1075h with GTX 1660 Ti
Re: Enigma2 and BBC/ITV at 27.5W Intelsat - a big challenge #1588
Re: Enigma2 and BBC/ITV at 27.5W Intelsat - a big challenge #1589
Re: Enigma2 and BBC/ITV at 27.5W Intelsat - a big challenge #1590
Posted 15 November 2019 - 20:57
Service appears to there - I get a good signal - just not decoding?
Edited by twol, 15 November 2019 - 20:57.
Gigablue Quad 4K & UE 4K, Vu+Uno4KSE, DM900
.........FBC Tuners:
------------------> GT-SAT unicable lnb to 1.5M dish(28.2E)
------------------> Gigablue unicable lnb to 80 cm dish(19.2E)
Octagon sf8008, AX HD61, Edision Osmio 4K+, Zgemma H9Combo using Legacy ports on multiswitches
Zgemma H9twin & Zgemma H9 C/S mode into Giga4K
Re: Enigma2 and BBC/ITV at 27.5W Intelsat - a big challenge #1591
Re: Enigma2 and BBC/ITV at 27.5W Intelsat - a big challenge #1592
Re: Enigma2 and BBC/ITV at 27.5W Intelsat - a big challenge #1593
Re: Enigma2 and BBC/ITV at 27.5W Intelsat - a big challenge #1594
Re: Enigma2 and BBC/ITV at 27.5W Intelsat - a big challenge #1595
Re: Enigma2 and BBC/ITV at 27.5W Intelsat - a big challenge #1596
Re: Enigma2 and BBC/ITV at 27.5W Intelsat - a big challenge #1597
Posted 27 November 2019 - 12:56
Hello, my Dreambox 7020HD is showing some signs of distress, and I am thinking about changing it.
I ask here because of course the new receiver should support as easy as possible these channels (until they last and beyond!).
My Dreambox is working really fine with BBC, so it is just a tyre getting flat, not because I cannot manage the use of my present receiver. It is all "go" at the moment, apart the IR remote (I am now using the smartphone apps through LAN) and some more frequent hiccups.
Ideally, since I am changing, the new receiver should support natively multistream channels and also as high as possible signal coding (I am not talking about encryption), such as 16 or even 32 PSK.
The higher the better.
I am now using 2 separate sat receiver modules and I would still require those. And if they are of good quality and sensitive I would be even more happy.
Ah, a less obvious requirement would be the possibility to manage in some way a serial interface via scripts (and possibly a USB converter if needed, provided there are drivers available). That is the way I am presently controlling my LT8700 to have it move my dish. I can do it also externally, but I would love having a all-in-one-box solutions as I have now.
Do you have any suggestion?
I thank you in advance!
Cheers!
Sleepy
Re: Enigma2 and BBC/ITV at 27.5W Intelsat - a big challenge #1598
Re: Enigma2 and BBC/ITV at 27.5W Intelsat - a big challenge #1599
Re: Enigma2 and BBC/ITV at 27.5W Intelsat - a big challenge #1600
12 user(s) are reading this topic
0 members, 11 guests, 0 anonymous users
-
Bing (1)