57 replies to this topic

[dirocca]

have you inserted the card far enough in the box?

you really have to push.

 

you don´t need to cfg anything to see your card. you chould see something like this(screenshot)

 screenshot.jpg   55.48KB   29 downloads

 

 

grtz Philip

[Jenjen]

Yes, only a couple of millimeters is sticking out.

 

All I have is no or unknown card inserted for both slots.

I just started from scratch, going back to factory settings, made no difference.

 

Could it really be an old card ?

Even though it worked before image and CCcam update.

Maybe I should order a new one.

[Jenjen]

Looking at my emails from then, I think that I have used CCcam 2.1.4

Can I find that anywhere, and how to install this ??

[Jenjen]

I found it and installed it, but it seems to be the same........

[Potatis]

Same here, have both 7020HD and Solo2, viasat card is not detected, cd works though.

Don't know for how long because I ordered Viasat last week. I'm going to test blackhole (temporarily) to see if it's cccam or something else.

[Jenjen]

I am beginning to wonder, if I should re-flash with an older image.

 

I have a clean installation, and I have tried now CCcam 2.0.9, 2.1.4, 2.2.1 and 2.3.0

 

All are running, if I look at IP:16001 and entitlements all show

 

card reader /dev/sci0
no or unknown card inserted

card reader /dev/sci1
no or unknown card inserted
 

I am using internal reader, and I have tried both readers. Card work in original box.

 

The only thing, that I have not tried is a new card, since this is from 2011. I have ordered a new card.

[Jenjen]

I have reflashed with my 2011 image.

But the feed is empty, so how do I install CCcam ?

Is there a workaround for that ??

 

Or can I see, if card is detected, without installing any cam ??

[WanWizard]

There is absolutely nothing in the image that has any relation with whether or not a softcam can access a smartcard. So it's pointless flashing another image.

 

If you telnet into the box, and do

 

killall CCcam
/usr/bin/CCcam -d

 

you can see the cccam debug log. Perhaps there's an error message that can help us further...

 

(you can use ctrl-C to kill CCcam logging, after which you can start it again normally with the remote from the menu)

[Jenjen]

OK, I'm back on todays image, and a totally clean install, with only the default CCcam. Not changed a single ting.

 

Log:

20:07:53.104 CCcam: ======================================================================
20:07:53.106 CCcam: starting CCcam 2.3.0 compiled on Dec 15 2011@23:38:08
20:07:53.106 CCcam: ======================================================================
20:07:53.106 CCcam: online using nodeId a52d4d4ba5488e51
20:07:53.110 CCcam: dvb api3 detected
20:07:53.112 CCcam: DM8000 detected
20:07:53.112 CCcam: create 8 cam device(s)

20:07:54.367 CCcam: card init fail

20:07:54.587 CCcam: readKeyfile: cannot open /var/keys/SoftCam.Key or not found

20:07:54.587 CCcam: readKeyfile: cannot open /var/keys/AutoRoll.Key or not found
20:07:54.587 CCcam: static cw not found or bad
20:07:54.588 CCcam: parsed 0 entries from /var/etc/CCcam.prio
20:07:54.588 CCcam: readProviderfile: cannot open /var/etc/CCcam.providers or not found
20:07:54.589 CCcam: readChannelList: cannot open /var/etc/CCcam.channelinfo or not found
20:07:54.589 CCcam: server started on port 12000
20:07:54.595 CCcam: found nds caid: 0x90f ecmpid: 0x1b6a id: 0x0
20:07:54.596 CCcam: found nds caid: 0x93e ecmpid: 0x68 id: 0x0
20:07:54.596 CCcam: cam[0] set PMT for sid=1b62
20:07:54.597 CCcam: start EMM
20:07:54.614 CCcam: EMM demux 1 set
20:07:54.614 CCcam: EMM: not interested in 090F:000000
20:07:54.614 CCcam: EMM: not interested in 093E:000000
20:07:54.628 CCcam: [31;1mcam[0] ecm odd nok caid:0x90f id:0x0 pid:0x1b6a Unknown[0m
20:07:54.720 CCcam: [31;1mcam[0] ecm odd nok caid:0x93e id:0x0 pid:0x68 Unknown[0m
20:07:54.728 CCcam: [31;1mcam[0] ecm odd nok caid:0x90f id:0x0 pid:0x1b6a Unknown[0m

20:07:54.820 CCcam: [31;1mcam[0] ecm odd nok caid:0x93e id:0x0 pid:0x68 Unknown[0m
20:07:54.828 CCcam: [31;1mcam[0] ecm odd nok caid:0x90f id:0x0 pid:0x1b6a Unknown[0m
20:07:54.920 CCcam: [31;1mcam[0] ecm odd nok caid:0x93e id:0x0 pid:0x68 Unknown[0m

20:07:55.616 CCcam: card init fail

20:07:57.863 CCcam: card init fail

[Jenjen]

With no card inserted, I do not get the  card init fail.

 

But I get the card init fail, with the card inserted - also if I insert it upside down. So there must be a simple switch, that detects the card, it seems like there is no communication with the card at all.

 

My config is empty - untouched from the install.

 

 I am getting a little fustrated, no TV for a week now.....   What to try next ?

[Jenjen]

Just checked my mailbox - brand new card from Viasat.

 

Had my hopes up high, but it made no difference. Read on another post, that some dreamboxes had problem with reading Viasat cards - could that be my problem. I have a DM8000.

[Jenjen]

Any help would be apreciated.

 

WanWizard, does the log tell you something ??

[blzr]

FWIW:

cccam cannot read the newer viasat card , needs to be oscam

so, I would try if oscam reads the card...

[Jenjen]

OK, just trying that. Is there no oscam.cfg in ETC as default ?

[Jenjen]

Ah, found it, different location. And IP:16200 actually show that a card is initialized. Now I just need to figure out the config.

[Jenjen]

I have tried adding a boxid = xxxxxxxx in oscam.server

 

Still black screen, this is my log, any ideas ??

 

2013/05/26 12:20:09 0 s creating pidfile /tmp/oscam.pid with pid 2102
2013/05/26 12:20:09 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2013/05/26 12:20:09 0 s signal handling initialized
2013/05/26 12:20:09 0 s 164 service-id's loaded in 5ms
2013/05/26 12:20:09 0 s 10 provid's loaded
2013/05/26 12:20:09 0 s card [internal] creating thread for device /dev/sci0
2013/05/26 12:20:09 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2013/05/26 12:20:09 0 s waiting for local card init
2013/05/26 12:20:09 892348 r card [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=357, cardmhz=357)
2013/05/26 12:20:09 89B908 h webif: decompressed 52609 bytes back into 152072 bytes
2013/05/26 12:20:09 89B908 h HTTP Server listening on port 16200
2013/05/26 12:20:10 0 s init for all local cards done
2013/05/26 12:20:10 0 s anti cascading disabled
2013/05/26 12:20:10 89E690 c plain dvbapi-client granted (dvbapiau, au=auto (1 reader))
2013/05/26 12:20:10 89E690 c Detected /dev/dvb/adapter0/demux0 Api: 0
2013/05/26 12:20:14 89E690 c [ADD PID 0] CAID: 090F ECM_PID: 076B PROVID: 000000
2013/05/26 12:20:14 89E690 c [ADD PID 1] CAID: 093E ECM_PID: 0132 PROVID: 000000
2013/05/26 12:20:14 89E690 c [ADD STREAM 0] CAID: 090F ECM_PID: 076B PROVID: 000000
2013/05/26 12:20:14 89E690 c [ADD STREAM 1] CAID: 093E ECM_PID: 0132 PROVID: 000000
2013/05/26 12:20:14 89E690 c Found 2 ECMpids and 3 STREAMpids in PMT
2013/05/26 12:20:14 89E690 c New program number: 0762 (090F:0762 unknown) [pmt_list_management 3]
2013/05/26 12:20:14 89E690 c ERROR: Can't decode channel
2013/05/26 12:20:18 89E690 c [ADD PID 0] CAID: 090F ECM_PID: 0711 PROVID: 000000
2013/05/26 12:20:18 89E690 c [ADD PID 1] CAID: 093E ECM_PID: 0190 PROVID: 000000
2013/05/26 12:20:18 89E690 c [ADD STREAM 0] CAID: 090F ECM_PID: 0711 PROVID: 000000
2013/05/26 12:20:18 89E690 c [ADD STREAM 1] CAID: 093E ECM_PID: 0190 PROVID: 000000
2013/05/26 12:20:18 89E690 c Found 2 ECMpids and 3 STREAMpids in PMT
2013/05/26 12:20:18 89E690 c New program number: 0708 (090F:0708 unknown) [pmt_list_management 3]
2013/05/26 12:20:18 89E690 c ERROR: Can't decode channel 
 

[WanWizard]

Any help would be apreciated.

 

WanWizard, does the log tell you something ??

 

No, I had that once with an NDS card that was fried by Oscam, but I managed to revive that in the original box.

 

Since you say the card works fine in another box, we can assume there's nothing wrong with the card.

[Jenjen]

Yes, card works in original box.

And it worked before installing new image.

 

Fried by oscam - now I am getting a little nervous, just installed oscam.....

[WanWizard]

It was a long time ago, when they were experimenting with running the cards on higher clocks, in an attempt to speed it up. Which the NDS card didn't like one single bit.

 

A lot of people use Oscam, so I don't think this is the case anymore.

[Jenjen]

Can you see anything from my oscam log ??

 

Only thing changed, is oscam.server, adding boxkey (stdid to hex).

 

[reader]
label                         = card
enable                        = 1
protocol                      = internal
boxid                         = xxxxxxxx
0100:00006A|CDS NL[S3]||Dutch
0100:00006B|CDS NL[S3]
0100:00006C|TVV[S3]||Dutch
0100:00006D|TeléSAT [S3]|FrenchBe
0500:040810|SGR Suisse [V4]|13.0E|Swiss
0500:040820|SGR Suisse [V4]|13.0E|Swiss
0500:040830|SGR Suisse [V4]|13.0E|Swiss
0500:042800|BIS TV [V4]|13.0E|French
0500:042A00|CanalSAT [V4]|19.2E|French
0500:042A10|CanalSAT [V4]|19.2E|French
device                        = /dev/sci0
detect                        = cd
group                         = 1
emmcache                      = 1,3,15
audisabled                    = 0