Jump to content


Photo

VU+ Solo2 --- A little setup advice needed please.

VU+ Solo2 DISEqC Openpli

  • Please log in to reply
5 replies to this topic

#1 hdp160

  • Senior Member
  • 100 posts

0
Neutral

Posted 14 July 2013 - 17:37

I've just upgraded from Dreambox and I'm having a few issues.

 

I've a fixed Dish Lnb pointing at 28.2E  ( Connected to Solo2 LNB input 2)

 

and my Technomate TM-2600  (Connected to Solo2 LNB input 1)

 

With various settings I have had everything working at times but it has been very unstable.

 

Do you think these settings are wrong please.

 

TUNER B

 

Configuration mode............. Advanced

Satellite ...............................28.2E

LNB .....................................LNB 2

Priority..................................Auto

LOF......................................Universal LNB

Voltage mode.......................Polerisation

Increased voltage................No

Tone mode..........................Band

DISEqC mode.....................No

 

TUNER A

 

Configuration mode ..................Advanced

Satellite ....................................19.2E        (This sat is stored in my TM-2600 in position 1)

LNB............................................LNB 1

Priority.......................................Auto

LOF...........................................Universal LNB

Voltage mode............................Polerisation

Increased voltage.....................No

Tone mode ...............................Off

DISEqC mode...........................1.2

Toneburst..................................On

Commited DISEqC command....None

Fast DISEqC..............................No

Sequence repeat ......................No

Command order........................Commited Toneburst

Uncommitted DISEqC command......... None

DISEqC Repeats .........................None

Longditute....................................005.100   (I've not altered these values )

                                                    East

Latitude.......................................050.767    (I've not altered these values)

                                                    North

Use USALS for this sat...............No

Stored position...........................001   (This the position that 19.2E is stored in my TM-2600)

Tuning step size........................0.360

Horizontal turning speed............2.3  (I've not altered these values)

Vertical turning speed ...............1.7   (I've not altered these values)

 

I have repeated the above configuration details for several of my favorite satellites only altering the second line "Satellite" eg to 13.0E and the stored postion to for example 002 Etc.

 

Thanks in anticipation

 

 

 

 

 

 



Re: VU+ Solo2 --- A little setup advice needed please. #2 hdp160

  • Senior Member
  • 100 posts

0
Neutral

Posted 14 July 2013 - 17:45

Small error TUNER A

 

Toneburst is currently set to none


Edited by hdp160, 14 July 2013 - 17:45.


Re: VU+ Solo2 --- A little setup advice needed please. #3 hdp160

  • Senior Member
  • 100 posts

0
Neutral

Posted 14 July 2013 - 19:54

I think I have found the problem but I don't know how to fix it.

 

In the positioner setup menu my satellite positions are NOT being stored.

 

I have tried several times but when I return to postioner setup menu the positions are not there.

 

There is a message ..... Warning no LNB: using factory defaults.

 

Help! Please!



Re: VU+ Solo2 --- A little setup advice needed please. #4 hdp160

  • Senior Member
  • 100 posts

0
Neutral

Posted 14 July 2013 - 20:25

I've decided to edit the /etc/enigma2/settings  file

 

for east facing satellites for example 13e  I think the lines should be ....................

 

config.Nims.0.advanced.sat.130.rotorposition=3
config.Nims.0.advanced.sat.130.usals=false
config.Nims.0.advanced.sat.130.lnb=1

 

Anyone know what the syntax is for west facing satellites for example 0.08W



Re: VU+ Solo2 --- A little setup advice needed please. #5 hdp160

  • Senior Member
  • 100 posts

0
Neutral

Posted 14 July 2013 - 21:14

I hope someone is reading / following this thread....

 

I've tried several amended /etc/enigma2/settings files

 

Telneting init 4  before overwriting and init 3 to restart etc.

 

Currently the relevent part of the file looks like this..........

 

config.Nims.1.powerMeasurement=false
config.Nims.1.diseqcA=3601                         *** not sure what these 4 lines are doing but the fixed dish is working fine.
config.Nims.1.diseqcB=3601
config.Nims.1.diseqcC=3601
config.Nims.1.diseqcD=3601
config.Nims.1.configMode=advanced
config.Nims.1.advanced.sats=282
config.Nims.1.advanced.sat.282.lnb=2
config.Nims.0.powerMeasurement=false
config.Nims.0.diseqcA=194                              **** not sure what these 4 lines are doing?
config.Nims.0.diseqcB=3601
config.Nims.0.diseqcC=3601
config.Nims.0.diseqcD=3601
config.Nims.0.configMode=advanced
config.Nims.0.diseqcMode=single
config.Nims.0.simpleSingleSendDiSEqC=true
config.Nims.0.advanced.sat.130.rotorposition=3
config.Nims.0.advanced.sat.130.usals=false
config.Nims.0.advanced.sat.130.lnb=1
config.Nims.0.advanced.sat.282.rotorposition=2
config.Nims.0.advanced.sat.282.usals=false
config.Nims.0.advanced.sat.192.rotorposition=1
config.Nims.0.advanced.sat.192.usals=false
config.Nims.0.advanced.sat.192.lnb=1
config.Nims.0.advanced.sat.3592.rotorposition=4
config.Nims.0.advanced.sat.3592.usals=false
config.Nims.0.advanced.sat.3592.lnb=1
config.Nims.0.advanced.sat.3530.rotorposition=5
config.Nims.0.advanced.sat.3530.usals=false
config.Nims.0.advanced.sat.3530.lnb=1
config.Nims.0.advanced.sat.70.rotorposition=6
config.Nims.0.advanced.sat.70.usals=false
config.Nims.0.advanced.sat.70.lnb=1
config.Nims.0.advanced.lnb.1.diseqcMode=1_2
config.Nims.0.advanced.lnb.1.powerMeasurement=false

 

**** something is wrong but I can't see it !!!!!

 

Six satellites.............. position 1 19.2E,   position 2 28.2E (but not used here), position 3 13E, position 4 0.8W (not sure if syntax is correct), position 5 7W (not sure if syntax correct) , position 6 7E.

 

TIA



Re: VU+ Solo2 --- A little setup advice needed please. #6 hdp160

  • Senior Member
  • 100 posts

0
Neutral

Posted 14 July 2013 - 21:20

I've just realised that 3592 for 0.8W is 3600 minus the 8

and 3530 for 7W is 3600 minus 70

 

obvious really ;-)





1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users