Jump to content


Photo

OpenPli VU+ Duo2 support


  • Please log in to reply
183 replies to this topic

Re: OpenPli VU+ Duo2 support #141 Andhy

  • Member
  • 3 posts

0
Neutral

Posted 19 September 2013 - 11:35

After update 18/9 i can see my vuduo2 on my computer w8, thank you!

 

But still having tuner problem

 

Tuner A snr. 84-95%

Tuner B snr. 0%

Tuner C snr.52-77%...?

 

/Andhy



Re: OpenPli VU+ Duo2 support #142 2boom

  • Senior Member
  • 100 posts

+17
Neutral

Posted 20 September 2013 - 20:30

After today update, stb does not power up with rc from deepstandby



Re: OpenPli VU+ Duo2 support #143 2boom

  • Senior Member
  • 100 posts

+17
Neutral

Posted 21 September 2013 - 09:17

If nobody understood me, the situation is: after full receiver shutdown, a light goes on on  the receiver panel, but pressing STB-Power on the remote does not  do anything, reseiver turns on only after pressing Power on the receiver itself....



Re: OpenPli VU+ Duo2 support #144 littlesat

  • PLi® Core member
  • 57,058 posts

+698
Excellent

Posted 21 September 2013 - 09:36

Powerup from deepstandby is handled by the frontprocessor and possibly something included in the drivers. Then the driver upgrade likely breaks it.

WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W


Re: OpenPli VU+ Duo2 support #145 pieterg

  • PLi® Core member
  • 32,766 posts

+245
Excellent

Posted 21 September 2013 - 09:54

OpenPLi is not running in deepstandby.

Re: OpenPli VU+ Duo2 support #146 littlesat

  • PLi® Core member
  • 57,058 posts

+698
Excellent

Posted 21 September 2013 - 10:27

Rfllllll....

WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W


Re: OpenPli VU+ Duo2 support #147 Dimitrij

  • PLi® Core member
  • 10,258 posts

+347
Excellent

Posted 26 September 2013 - 18:14

Decision.
Update the driver.

http://archive.vuplu...20130819.tar.gz


GigaBlue UHD Quad 4K /Lunix3-4K/Duo 4K


Re: OpenPli VU+ Duo2 support #148 Tech

  • Forum Moderator
    PLi® Core member
  • 14,888 posts

+485
Excellent

Posted 26 September 2013 - 19:50

Can you explain to me how to load a driver on an unpowered and not running system?

 

I don't see how this driver update will solve this issue, I rather think you need a frontpanel update instead.


Aan de rand van de afgrond is een stap voorwaarts niet altijd vooruitgang....

On the edge of the abyss, a step forward is not always progress....

Hardware: 2x Daily used Vu+ Ultimo 4K - Vu+ Duo 4K SE and a lot more.... - VisioSat BiBigsat - Jultec Unicable Multiswitch 4 positions: 19.2/23.5/28.2 East - Diseqc motorized flatdish antenna

Software : HomeBuild OpenPLi Develop and Scarthgap builds, local cards driven by OsCam

Press the Posted Image button on the buttom right of this message ;)

Have you tried our wiki yet? Many answers can be found in our OpenPLi wiki


Re: OpenPli VU+ Duo2 support #149 Dimitrij

  • PLi® Core member
  • 10,258 posts

+347
Excellent

Posted 26 September 2013 - 19:52

Sorry, you can delete my previous post.

The solution is very simple ...
install
enigma2-plugin-systemplugins-remotecontrolcode

or telnet:

echo "2" > /proc/stb/fp/remote_code

It's very strange, obvious bug in the drivers :) .


GigaBlue UHD Quad 4K /Lunix3-4K/Duo 4K


Re: OpenPli VU+ Duo2 support #150 Dimitrij

  • PLi® Core member
  • 10,258 posts

+347
Excellent

Posted 27 September 2013 - 19:11

Question :( .
VU + is support
input device(Interval between keys when repeating/Delay before key repeat starts) or?


GigaBlue UHD Quad 4K /Lunix3-4K/Duo 4K


Re: OpenPli VU+ Duo2 support #151 Dimitrij

  • PLi® Core member
  • 10,258 posts

+347
Excellent

Posted 28 September 2013 - 06:05

Question :( .
VU + is support
input device(Interval between keys when repeating/Delay before key repeat starts) or?

Nobody knows the answer.
I will ask the question differently.

Besides ETх00 models, this feature works anywhere?


GigaBlue UHD Quad 4K /Lunix3-4K/Duo 4K


Re: OpenPli VU+ Duo2 support #152 pieterg

  • PLi® Core member
  • 32,766 posts

+245
Excellent

Posted 28 September 2013 - 08:12

I think it works on dreamboxes as well.

Re: OpenPli VU+ Duo2 support #153 Dimitrij

  • PLi® Core member
  • 10,258 posts

+347
Excellent

Posted 28 September 2013 - 08:16

I think it works on dreamboxes as well.

At VU+ is just not working.
I connected usb keyboard, change the settings in the '
Input Device'.
No reaction.


GigaBlue UHD Quad 4K /Lunix3-4K/Duo 4K


Re: OpenPli VU+ Duo2 support #154 cyb

  • Member
  • 48 posts

0
Neutral

Posted 7 October 2013 - 22:35

Sorry, wrong section...


Edited by cyb, 7 October 2013 - 22:40.


Re: OpenPli VU+ Duo2 support #155 jakey

  • Senior Member
  • 129 posts

+3
Neutral

Posted 9 October 2013 - 00:44

This problem has been posted twice now in this thread and twice it has been ignored :(

 

I got myself a Duo2 today so please can we have the missing emm28xx modules and depends on the feed.

 

Ok, I think what is causing the enigma2  to get stuck in start up. I have a Hauppage Win-TV Duet USB stick, which uses dib0700 and em28xx drivers. The dib0700 install ok, but the em28xx gives the following error:

 

Installing enigma2-plugin-drivers-dvb-usb-em28xx (1.0-r0) to root...
Downloading http://downloads.pli...0_mips32el.ipk.
Collected errors:
 * satisfy_dependencies_for: Cannot satisfy the following dependencies for enigma2-plugin-drivers-dvb-usb-em28xx:
 *     kernel-module-em28xx-dvb *
 * opkg_install_cmd: Cannot install package enigma2-plugin-drivers-dvb-usb-em28xx.

 

If the dib0700 driver is installed but the em28xx is missing then enigma2 gets stuck in the startup. Seems that the kernel module has disappeared from the feeds also previously, but it was available for a while last month.

 

Any idea how to fix this?

 

 

Thanks!



Re: OpenPli VU+ Duo2 support #156 Husami

  • Member
  • 4 posts

0
Neutral

Posted 2 November 2013 - 00:55

Hello, did I get it right? The "letters"-problem is solved? Not for me... :-(

Re: OpenPli VU+ Duo2 support #157 athoik

  • PLi® Core member
  • 8,458 posts

+327
Excellent

Posted 2 November 2013 - 07:00

enigma2-plugin-drivers-dvb-usb is common for every receiver in OpenPLi 4, but kernels are not the same for every box, so you have missing kernel modules.

That is the cause i think.
Wavefield T90: 0.8W - 1.9E - 4.8E - 13E - 16E - 19.2E - 23.5E - 26E - 33E - 39E - 42E - 45E on EMP Centauri DiseqC 16/1
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916

Re: OpenPli VU+ Duo2 support #158 athoik

  • PLi® Core member
  • 8,458 posts

+327
Excellent

Posted 2 November 2013 - 08:00

The problem after all seems the kernel config.
CONFIG_VIDEO_EM28XX=m
CONFIG_VIDEO_EM28XX_ALSA=m
CONFIG_VIDEO_EM28XX_DVB=m
CONFIG_VIDEO_EM28XX_RC=y
We are missing CONFIG_VIDEO_EM28XX from kernel.

What is the proper way to change defconfig on kernel and provide patch?
Wavefield T90: 0.8W - 1.9E - 4.8E - 13E - 16E - 19.2E - 23.5E - 26E - 33E - 39E - 42E - 45E on EMP Centauri DiseqC 16/1
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916

Re: OpenPli VU+ Duo2 support #159 athoik

  • PLi® Core member
  • 8,458 posts

+327
Excellent

Posted 2 November 2013 - 21:09

Hello,

The following modules are enabled on other boxes:
#
# Miscelaneous helper chips (vuuno/vuduo/vuultimo/vusolo)
#
CONFIG_VIDEO_EM28XX=m
CONFIG_VIDEO_EM28XX_ALSA=m
CONFIG_VIDEO_EM28XX_DVB=m
CONFIG_VIDEO_EM28XX_RC=y



#
# Miscelaneous helper chips (dm7020hd/dm800se/..)
#
..
CONFIG_VIDEO_EM28XX=m
CONFIG_VIDEO_EM28XX_ALSA=m
CONFIG_VIDEO_EM28XX_DVB=m
# CONFIG_VIDEO_EM28XX_RC is not set
...


#
# Webcam, TV (analog/digital) USB devices (et9x00/et4x00..)
#
CONFIG_VIDEO_EM28XX=m
CONFIG_VIDEO_EM28XX_ALSA=m
CONFIG_VIDEO_EM28XX_DVB=m
CONFIG_VIDEO_EM28XX_RC=m
But there is no EM28XX under vuduo2 or vusolo2.

I need to do make oldconfig and enable EM28XX?
Wavefield T90: 0.8W - 1.9E - 4.8E - 13E - 16E - 19.2E - 23.5E - 26E - 33E - 39E - 42E - 45E on EMP Centauri DiseqC 16/1
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916

Re: OpenPli VU+ Duo2 support #160 athoik

  • PLi® Core member
  • 8,458 posts

+327
Excellent

Posted 3 November 2013 - 13:24

Hello,


I create new config files for vuduo2 and vusolo2 where CONFIG_VIDEO_EM28XX is enabled.

The procedure to create new config files was the following:
tar -xjf stblinux-3.3.6-2.0.tar.bz2
cd linux
patch -p1 < ../brcm_3.3.patch
patch -p1 < ../fix_cpu_proc.patch
patch -p1 < ../brcm_mtd_mac.patch
patch -p1 < ../dvb_core_5.5.patch
patch -p1 < ../bmips-no-array-bounds.patch
patch -p1 < ../mips-refactor-clearpage-and-copypage.patch
patch -p1 < ../dvb-usb-af9035.patch
patch -p1 < ../tda18218-7mhz-lopass.patch
patch -p1 < ../dvb-usb-a867.patch
patch -p1 < ../dvb-usb-rtl2832.patch
patch -p1 < ../cxd2820r-enable-LNA-for-DVB-T.patch
patch -p1 < ../cxd2820r-changed-condition-to-break-out-from-wait-lock-loop.patch
patch -p1 < ../cxd2820r-output-full-range-SNR.patch
patch -p1 < ../cinergy_s2_usb_r2.patch
patch -p1 < ../as102-scale-MER-to-full-range.patch
patch -p1 < ../as102-adjust-signal-strength-report.patch
patch -p1 < ../em28xx-pre-allocate-DVB-isoc-transfer-buffers.patch
patch -p1 < ../em28xx-dvb-stop-URBs-when-stopping-the-streaming.patch
patch -p1 < ../af9015-output-full-range-SNR.patch
patch -p1 < ../it913x-backports-from-kernel-3.4.patch
patch -p1 < ../it913x-backports-from-kernel-3.5.patch
patch -p1 < ../it913x-switch-off-PID-filter-by-default.patch
patch -p1 < ../it913x-fix-bulk-read-write-retry-loop.patch
patch -p1 < ../dvb-usb-dib0700-disable-sleep.patch
patch -p1 < ../dvb_usb_disable_rc_polling.patch
patch -p1 < ../fix-dvb-siano-sms-order.patch
patch -p1 < ../nfs-max-rwsize-8k.patch
cp ../vuXXXX2_defconfig .config
ARCH=mips make menuconfig
Device Drivers --->
Multimedia support --->
< > Video For Linux (NEW) was empty changed to <*> Video For Linux
Video capture adapters (NEW) --->
V4L USB devices(NEW) --->
< > Empia EM28xx USB video capture support (NEW) was empty changed to <M> Empia EM28xx USB video capture support
< > Empia EM28xx ALSA audio module was empty changed to <M> Empia EM28xx ALSA audio module
< > DVB/ATSC Support for em28xx based TV cards was empty changed to <M> DVB/ATSC Support for em28xx based TV cards
Exit and Save Configuration.
Please find attached new defconfig (and patch from previous version).

@OpenPLi if there above prodecure is not ok, or if there is something wrong please let me know. If everything is ok i will create also patch in git mail format.

Thanks.

Attached Files


Wavefield T90: 0.8W - 1.9E - 4.8E - 13E - 16E - 19.2E - 23.5E - 26E - 33E - 39E - 42E - 45E on EMP Centauri DiseqC 16/1
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916


1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users