183 replies to this topic

[Andhy]

After update 18/9 i can see my vuduo2 on my computer w8, thank you!

 

But still having tuner problem

 

Tuner A snr. 84-95%

Tuner B snr. 0%

Tuner C snr.52-77%...?

 

/Andhy

[2boom]

After today update, stb does not power up with rc from deepstandby

[2boom]

If nobody understood me, the situation is: after full receiver shutdown, a light goes on on  the receiver panel, but pressing STB-Power on the remote does not  do anything, reseiver turns on only after pressing Power on the receiver itself....

[littlesat]

Powerup from deepstandby is handled by the frontprocessor and possibly something included in the drivers. Then the driver upgrade likely breaks it.

[pieterg]

OpenPLi is not running in deepstandby.

[littlesat]

Rfllllll....

[Dimitrij]

Decision.
Update the driver.

http://archive.vuplu...20130819.tar.gz

[Tech]

Can you explain to me how to load a driver on an unpowered and not running system?

 

I don't see how this driver update will solve this issue, I rather think you need a frontpanel update instead.

[Dimitrij]

Sorry, you can delete my previous post.

The solution is very simple ...
install enigma2-plugin-systemplugins-remotecontrolcode

or telnet:

echo "2" > /proc/stb/fp/remote_code

It's very strange, obvious bug in the drivers .

[Dimitrij]

Question .
VU + is support input device(Interval between keys when repeating/Delay before key repeat starts) or?

[Dimitrij]

Question .
VU + is support input device(Interval between keys when repeating/Delay before key repeat starts) or?

Nobody knows the answer.
I will ask the question differently.

Besides ETх00 models, this feature works anywhere?

[pieterg]

I think it works on dreamboxes as well.

[Dimitrij]

I think it works on dreamboxes as well.

At VU+ is just not working.
I connected usb keyboard, change the settings in the 'Input Device'.
No reaction.

[cyb]

Sorry, wrong section...

Edited by cyb, 7 October 2013 - 22:40.

[jakey]

This problem has been posted twice now in this thread and twice it has been ignored

 

I got myself a Duo2 today so please can we have the missing emm28xx modules and depends on the feed.

 

Ok, I think what is causing the enigma2  to get stuck in start up. I have a Hauppage Win-TV Duet USB stick, which uses dib0700 and em28xx drivers. The dib0700 install ok, but the em28xx gives the following error:

 

Installing enigma2-plugin-drivers-dvb-usb-em28xx (1.0-r0) to root...
Downloading http://downloads.pli...0_mips32el.ipk.
Collected errors:
 * satisfy_dependencies_for: Cannot satisfy the following dependencies for enigma2-plugin-drivers-dvb-usb-em28xx:
 *     kernel-module-em28xx-dvb *
 * opkg_install_cmd: Cannot install package enigma2-plugin-drivers-dvb-usb-em28xx.

 

If the dib0700 driver is installed but the em28xx is missing then enigma2 gets stuck in the startup. Seems that the kernel module has disappeared from the feeds also previously, but it was available for a while last month.

 

Any idea how to fix this?

 

 

Thanks!

[Husami]

Hello, did I get it right? The "letters"-problem is solved? Not for me... :-(

[athoik]

enigma2-plugin-drivers-dvb-usb is common for every receiver in OpenPLi 4, but kernels are not the same for every box, so you have missing kernel modules.

That is the cause i think.

[athoik]

The problem after all seems the kernel config.

CONFIG_VIDEO_EM28XX=m
CONFIG_VIDEO_EM28XX_ALSA=m
CONFIG_VIDEO_EM28XX_DVB=m
CONFIG_VIDEO_EM28XX_RC=y

We are missing CONFIG_VIDEO_EM28XX from kernel.

What is the proper way to change defconfig on kernel and provide patch?

[athoik]

Hello,

The following modules are enabled on other boxes:

#
# Miscelaneous helper chips (vuuno/vuduo/vuultimo/vusolo)
#
CONFIG_VIDEO_EM28XX=m
CONFIG_VIDEO_EM28XX_ALSA=m
CONFIG_VIDEO_EM28XX_DVB=m
CONFIG_VIDEO_EM28XX_RC=y



#
# Miscelaneous helper chips (dm7020hd/dm800se/..)
#
..
CONFIG_VIDEO_EM28XX=m
CONFIG_VIDEO_EM28XX_ALSA=m
CONFIG_VIDEO_EM28XX_DVB=m
# CONFIG_VIDEO_EM28XX_RC is not set
...


#
# Webcam, TV (analog/digital) USB devices (et9x00/et4x00..)
#
CONFIG_VIDEO_EM28XX=m
CONFIG_VIDEO_EM28XX_ALSA=m
CONFIG_VIDEO_EM28XX_DVB=m
CONFIG_VIDEO_EM28XX_RC=m

But there is no EM28XX under vuduo2 or vusolo2.

I need to do make oldconfig and enable EM28XX?

[athoik]

Hello,


I create new config files for vuduo2 and vusolo2 where CONFIG_VIDEO_EM28XX is enabled.

The procedure to create new config files was the following:

tar -xjf stblinux-3.3.6-2.0.tar.bz2
cd linux
patch -p1 < ../brcm_3.3.patch
patch -p1 < ../fix_cpu_proc.patch
patch -p1 < ../brcm_mtd_mac.patch
patch -p1 < ../dvb_core_5.5.patch
patch -p1 < ../bmips-no-array-bounds.patch
patch -p1 < ../mips-refactor-clearpage-and-copypage.patch
patch -p1 < ../dvb-usb-af9035.patch
patch -p1 < ../tda18218-7mhz-lopass.patch
patch -p1 < ../dvb-usb-a867.patch
patch -p1 < ../dvb-usb-rtl2832.patch
patch -p1 < ../cxd2820r-enable-LNA-for-DVB-T.patch
patch -p1 < ../cxd2820r-changed-condition-to-break-out-from-wait-lock-loop.patch
patch -p1 < ../cxd2820r-output-full-range-SNR.patch
patch -p1 < ../cinergy_s2_usb_r2.patch
patch -p1 < ../as102-scale-MER-to-full-range.patch
patch -p1 < ../as102-adjust-signal-strength-report.patch
patch -p1 < ../em28xx-pre-allocate-DVB-isoc-transfer-buffers.patch
patch -p1 < ../em28xx-dvb-stop-URBs-when-stopping-the-streaming.patch
patch -p1 < ../af9015-output-full-range-SNR.patch
patch -p1 < ../it913x-backports-from-kernel-3.4.patch
patch -p1 < ../it913x-backports-from-kernel-3.5.patch
patch -p1 < ../it913x-switch-off-PID-filter-by-default.patch
patch -p1 < ../it913x-fix-bulk-read-write-retry-loop.patch
patch -p1 < ../dvb-usb-dib0700-disable-sleep.patch
patch -p1 < ../dvb_usb_disable_rc_polling.patch
patch -p1 < ../fix-dvb-siano-sms-order.patch
patch -p1 < ../nfs-max-rwsize-8k.patch
cp ../vuXXXX2_defconfig .config
ARCH=mips make menuconfig
Device Drivers --->
Multimedia support --->
< > Video For Linux (NEW) was empty changed to <*> Video For Linux
Video capture adapters (NEW) --->
V4L USB devices(NEW) --->
< > Empia EM28xx USB video capture support (NEW) was empty changed to <M> Empia EM28xx USB video capture support
< > Empia EM28xx ALSA audio module was empty changed to <M> Empia EM28xx ALSA audio module
< > DVB/ATSC Support for em28xx based TV cards was empty changed to <M> DVB/ATSC Support for em28xx based TV cards
Exit and Save Configuration.

Please find attached new defconfig (and patch from previous version).

@OpenPLi if there above prodecure is not ok, or if there is something wrong please let me know. If everything is ok i will create also patch in git mail format.

Thanks.

Attached Files

•  vusolo2_defconfig_new.txt   61.51KB   4 downloads
•  vuduo2.patch.txt   11.85KB   0 downloads
•  vuduo2_defconfig_new.txt   62.26KB   0 downloads
•  vusolo2.patch.txt   5.97KB   6 downloads