Jump to content


Photo

TBS 5925


  • Please log in to reply
340 replies to this topic

Re: TBS 5925 #101 athoik

  • PLi® Core member
  • 8,458 posts

+327
Excellent

Posted 19 March 2016 - 21:40

Hi,

Yes the CI slot on tbs card.

TBS5980 cannot handle APSK,ACM,VCM and TBS5925 can.

Here are the specs of 5980

Receiving Frequency: 950~2150 MHz Tuning Range
Input level: -69~-23dBm
DVB-S2/DVB-S 8PSK QPSK Demodulator
Symbol Rate:
DVB-S QPSK 1~45Msps
DVB-S2 QPSK/8PSK 1~45Msps
Carrier Capture Range: ±10MHz
-DVB-S2 CCM
    QPSK+1/4, 1/3, 2/5, 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9, 9/10
    8PSK+3/5, 2/3, 3/4, 5/6, 8/9, 9/10
-DVB-S
    QPSK+1/2, 2/3, 3/4, 5/6, 7/8
Support Data Burst & Tone Burst
Support DiSEqC2.X and Motor
Single CI Slot
Here are for 5925

Receiving Frequency: 950~2150 MHz Tuning Range
Input level: -69~-23dBm
DVB-S2/DVB-S 8PSK QPSK 16APSK 32APSK Demodulator
Symbol Rate:
DVB-S QPSK 0.2~45Msps
DVB-S2 QPSK/8PSK 0.2~45Msps
Carrier Capture Range: ±10MHz
-DVB-S2 CCM ACM VCM
    QPSK+1/4, 1/3, 2/5, 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9, 9/10
    8PSK+3/5, 2/3, 3/4, 5/6, 8/9, 9/10
    16APSK+2/3, 3/4, 4/5, 5/6, 8/9, 9/10
    32APSK+3/4, 4/5, 5/6, 8/9, 9/10
-DVB-S
    QPSK+1/2, 2/3, 3/4, 5/6, 7/8
Support Data Burst & Tone Burst
Support DiSEqC2.X and Motor

Edited by athoik, 19 March 2016 - 21:41.

Wavefield T90: 0.8W - 1.9E - 4.8E - 13E - 16E - 19.2E - 23.5E - 26E - 33E - 39E - 42E - 45E on EMP Centauri DiseqC 16/1
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916

Re: TBS 5925 #102 jakey

  • Senior Member
  • 129 posts

+3
Neutral

Posted 19 March 2016 - 22:43

Thanks athoik, I'll be ordering the 5925 then :)



Re: TBS 5925 #103 MCelliotG

  • Senior Member
  • 443 posts

+35
Good

Posted 20 March 2016 - 02:12

As promised here's a video with scanning and zapping through all the Multistream channels I receive via sat!

TBS5925 on SatDreamGr image and OSmini receiver!


Edited by glamourservices, 20 March 2016 - 02:15.


Re: TBS 5925 #104 stpierre

  • Member
  • 19 posts

+2
Neutral

Posted 20 March 2016 - 11:56

Thanks athoik,

I have tested the "Satdreamgr-4.0-gst1-vusolo4k-20160319"

All work fine with the TBS5925 !

TV = Solo4K 2xDVB-S2 (FBC) + 2xDVB-T2 + TBS5925
Tuner A = Multisat Indoor Home Made 10 LNB 52°e > 5°w-Tuner B = Fibo 90cm USALS = 68°e > 45°w


Re: TBS 5925 #105 jpuigs

  • Senior Member
  • 1,143 posts

+32
Good

Posted 20 March 2016 - 12:14

I've tested Satdreamgr-4.0-gst1-et10000-20160319 and it works fine too.

Thanks,


Enigma is getting old....

 

Spoiler

Re: TBS 5925 #106 stone96

  • Member
  • 2 posts

0
Neutral

Posted 21 March 2016 - 19:33

With 800sev2 work?

thanks very much



Re: TBS 5925 #107 athoik

  • PLi® Core member
  • 8,458 posts

+327
Excellent

Posted 21 March 2016 - 20:31

Hi,

Dreambox has (old) kernel 3.2 so it requires several backports (at least FE_CAN_MULTISTREAM).

For machines with kernel >= 3.8 was much easier!

Anyway no plan for Dreambox ATM, of course if they switch to newer kernel (>=3.8) I will create the patch ASAP ;)

Edited by athoik, 21 March 2016 - 20:33.

Wavefield T90: 0.8W - 1.9E - 4.8E - 13E - 16E - 19.2E - 23.5E - 26E - 33E - 39E - 42E - 45E on EMP Centauri DiseqC 16/1
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916

Re: TBS 5925 #108 satenkabelgluurder

  • Senior Member
  • 141 posts

+2
Neutral

Posted 22 March 2016 - 09:28

@ATHOIK

 

I just saw at github that vu-plus merged commit ffbf03b into vu-plus:master 

I Does this mean that the TBS 5925 will be supported from the openpli nightly builds ?

I just ordered my TBS5925 yesterday :)



Re: TBS 5925 #109 athoik

  • PLi® Core member
  • 8,458 posts

+327
Excellent

Posted 22 March 2016 - 10:47

Hi,

 

 

Yes TBS5925 supported now for all VU+ models.

 

But:

 

1. You will have to put firmware manually in /lib/firmware

2. You will not have support for MIS/PLS since enigma2 patches are not merged yet

 

If you need full support with 1 & 2 points above, you should use experimental SatDreamGr at the moment.

 

For point 1 we need confirmation from TBS that we can include firmware in OpenPLi-OE.

 

(I have opened an account to TBS forum but they didn't accept me yet in order to ask them.)


Edited by athoik, 22 March 2016 - 10:47.

Wavefield T90: 0.8W - 1.9E - 4.8E - 13E - 16E - 19.2E - 23.5E - 26E - 33E - 39E - 42E - 45E on EMP Centauri DiseqC 16/1
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916

Re: TBS 5925 #110 satenkabelgluurder

  • Senior Member
  • 141 posts

+2
Neutral

Posted 22 March 2016 - 11:37

Maybe I did not searched enough :)

 

Where can I find the SatDreamGr for ET8k or VuSoloSe



Re: TBS 5925 #111 el bandido

  • Senior Member
  • 392 posts

+15
Neutral

Posted 22 March 2016 - 17:11

http://www.satdreamgr.com/forum/cmps_index.php?pageid=satdreamgr-images&tabid=577


Re: TBS 5925 #112 satenkabelgluurder

  • Senior Member
  • 141 posts

+2
Neutral

Posted 22 March 2016 - 17:41

Great !! thanks, hopefully my TBS arrives soon



Re: TBS 5925 #113 BOSSEB

  • Senior Member
  • 43 posts

0
Neutral

Posted 23 March 2016 - 09:51

with the last updates my tbs 5925 works perfectly with my vusolo4k with the satdreamgr-images-experimental



Re: TBS 5925 #114 sector_d

  • Member
  • 23 posts

0
Neutral

Posted 29 March 2016 - 16:28

Hi All,

 

I'm experimenting with my ET-9200 and Openli 4 image (kernel 3.8.7) but I'm failing to pass the 1st phase... I can't see the TBS5925 on the tuner list.

What I did:

 

1. Placed the file "dvb-usb-tbsqbox-id5925.fw" from TBS site in /lib/firmware and gave permissions 755

 

2. 

opkg update 

opkg install enigma2-plugin-drivers-dvb-usb-tbs

reboot

 

but no tuner on list... what am I doing wrong?



Re: TBS 5925 #115 athoik

  • PLi® Core member
  • 8,458 posts

+327
Excellent

Posted 29 March 2016 - 16:36

Kernel linux-etxx00_3.8.7 is not patched yet.
Wavefield T90: 0.8W - 1.9E - 4.8E - 13E - 16E - 19.2E - 23.5E - 26E - 33E - 39E - 42E - 45E on EMP Centauri DiseqC 16/1
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916

Re: TBS 5925 #116 sector_d

  • Member
  • 23 posts

0
Neutral

Posted 29 March 2016 - 17:25

Kernel linux-etxx00_3.8.7 is not patched yet.

Thank you for this information!

I am more into the RF part of the hobby than into Linux, although I like both...

 

What would be your suggestion:

 

a ) just wait, kernel 3.8.7 will be patched soon

b ) Upgrade now to a new image, 3.8.7 is outdated anyway


Edited by sector_d, 29 March 2016 - 17:25.


Re: TBS 5925 #117 betacentauri

  • PLi® Core member
  • 7,185 posts

+323
Excellent

Posted 29 March 2016 - 18:12

b ) Is not an option. Drivers for the box need 3.8.7. You cannot change that because drivers are closed source.


Edited by betacentauri, 29 March 2016 - 18:12.

Xtrend ET-9200, ET-8000, ET-10000, OpenPliPC on Ubuntu 12.04

Re: TBS 5925 #118 athoik

  • PLi® Core member
  • 8,458 posts

+327
Excellent

Posted 29 March 2016 - 22:58

Blindscan support for STV090x devices is also possible... An extra patch posted on patchwork.linuxtv enables the blindscan with proper data.

https://patchwork.li...rg/patch/19387/

I have already enabled blindscan on my OS mini using TBS5980 and it works ;)
Wavefield T90: 0.8W - 1.9E - 4.8E - 13E - 16E - 19.2E - 23.5E - 26E - 33E - 39E - 42E - 45E on EMP Centauri DiseqC 16/1
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916

Re: TBS 5925 #119 el bandido

  • Senior Member
  • 392 posts

+15
Neutral

Posted 29 March 2016 - 23:05

Excellent!
I have no idea how to install that patch in an image. Would love to test it , and learn how to install it in an image if possible.



Re: TBS 5925 #120 jakey

  • Senior Member
  • 129 posts

+3
Neutral

Posted 30 March 2016 - 00:34

Excuse my ignorance but what would need to happen to be able to use this tuner on my Solo 4k including MIS/PLS with ViX image ?




7 user(s) are reading this topic

0 members, 7 guests, 0 anonymous users