Im flash from scratch but no good
Chinese box, not genuine one.
Edited by tomek, 20 December 2014 - 19:51.
Posted 21 December 2014 - 07:48
Here my experience with my Vu Ultimo.
1) I did not see I need to reflash and not upgrade so I try to upgrade and my Ultimo freeze at boot
2) I flashed it with last image 2014-12-21, the Ultimo started
3) my hard drive did not mount (it is detected but not mounted), I tried to mount it manually with no success (GlassyUtil says : no partition)
4) I initialised my =hard drive, now it works but, of course, I lost all my recordings
5) I added, using mount manager, my network shares, all are reconized but none are mounted
So my questions are :
1) What did I do wrong so I lost my hard drive during upgrade ? Am I the only one with this problem ? (I will have to flash 3 Vu Duo...)
2) how can I force the network shares to be mounted ?
DM5620, DM500S, DM600, DM7000, DM7020, DM7025, DM800, DM8000, ET9200, ET6500, ET7500, ET8500, VU+DUO, VU+ULTIMO, GB800SE, GB800HD all with OpenPLi
Only the DM5620 went off in 2012 ! DM500S, DM600, DM7000 & DM7020 have been sold in 2014.
Posted 21 December 2014 - 10:05
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Posted 21 December 2014 - 13:56
I just updated my VU+ Uno with OpenPLI 4 using SSH terminal and after reboot the tuner stops on boot with text"Stating" on display. No GUI (HDMI) is shown and tuner do not start Ethernet interface and do not get an LAN IP so I am not able to try any SSH or Telnet login. Any suggestion where to start is most appreciated.
Flashing tuner with "OpenPLi-4.0-beta-vuuno-20141220_usb" did not work well as tuner started with factory default without reading autobackup data on HDD. After starting to set things up again it turns out that this OpenPLi version is unable to mount the HDD (Western Digital green 1.5T) and also I assume that is the reason for tuner on first-time-after-flash-boot backup config from HDD was not read.
At this time I solved this by flashing tuner with "OpenPLi-4.0-beta-vuuno-20141212_usb". As usual, everything then worked except EPG and SoftCam that needed to be setup again. (possibly because of old backup from OpenPLi 3)
My worries that my HDD was broken was at least not the case.
Hopefully this can be fixed in a future firmware, but now Christmas is closing and I wish everyone the best Christmas ever, although I know that what people want the most for Christmas this year can not be bought for money. Special Christmas greetings goes to the OpenPLi programmer hoping they are able to forget about C++ code and bugs and instead having a good time with family and friends !
Edited by MortenB, 21 December 2014 - 13:58.
Posted 21 December 2014 - 14:18
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Posted 21 December 2014 - 14:29
cifs share work on solo2 but stopped working on the solo with the latest build flash
Posted 21 December 2014 - 14:36
cifs share for the solo was acting as a hdd too
Posted 21 December 2014 - 14:44
Zie #56 from Erik
opkg update
opkg install kernel-module-cifs
opgk install kernel-module-ext4
init 6 # reboot
Hardware: Vu+ Uno 4K SE - Vu+ Duo 4K - Fuba 78 cm - Tripleblock LNB Quad 19.2/23.5/28.2 - DS918+
Software : OpenPLi - OSCam - Settings van Hans - Autotimer - EPGImport
---------------------------------------------------------------------------------------------------------------------------------------
Remember: Upvote with the button for any user/post you find to be helpful, informative, or deserving of recognition!
---------------------------------------------------------------------------------------------------------------------------------------
Many answers to your question can be found in our new and improved wiki
Posted 21 December 2014 - 15:25
DM5620, DM500S, DM600, DM7000, DM7020, DM7025, DM800, DM8000, ET9200, ET6500, ET7500, ET8500, VU+DUO, VU+ULTIMO, GB800SE, GB800HD all with OpenPLi
Only the DM5620 went off in 2012 ! DM500S, DM600, DM7000 & DM7020 have been sold in 2014.
0 members, 18 guests, 0 anonymous users