Posted 23 September 2015 - 18:29
That's just a graphic on the front, the light glows in the middle, just to make sure though I have just taken the lid of and as I though, no button!
afaik the Solo SE, like the Zero, needs a 'force' file which causes flashing to start automatically when the USB image is detected.
I have the force file in the folder, its just not working.....Man this is such a pain, I didn't have this issue with my zero!
Posted 23 September 2015 - 19:07
What version and build of OpenViX image do you have in the box? Menu -> Information -> About.
Posted 23 September 2015 - 19:10
Man the light is also an SOFT TOUCH button. Try it - nothing to lose.
Here is the video:
Edited by Freon, 23 September 2015 - 19:12.
MAY THE FORCE BE WITH YOU!
Posted 24 September 2015 - 11:41
Man the light is also an SOFT TOUCH button. Try it - nothing to lose.
Here is the video:
thier is no SOFT TOUCH button on the front....
Posted 24 September 2015 - 11:43
Resolved
I tried with another 8gb USB stick and this booted from it straight away.
Thanks to every one for thier input.
Cheers guys.
Posted 2 November 2015 - 13:55
That's just a graphic on the front, the light glows in the middle, just to make sure though I have just taken the lid of and as I though, no button!
afaik the Solo SE, like the Zero, needs a 'force' file which causes flashing to start automatically when the USB image is detected.
I have the force file in the folder, its just not working.....Man this is such a pain, I didn't have this issue with my zero!
I also having trouble flashing the Solo SE, if this force file also empty ? I expect some kind of boot file in it.
Posted 2 November 2015 - 14:00
Does anybody have a guidance what USB stick to use for the Solo SE ? as the 4G requirement is already overwritten as Jim uses a 8 GB. My Sony 8GB is connecting correct and can be mounted, but no luck with flashing.
Is there are way to load it from the Vu+ image over the ethernet to OpenPLI ?
Posted 2 November 2015 - 14:08
Mijn schotel is een T90 met 10 LNB's. Daarnaast voor de fun nog een draaibaar systeem met een Triax TD 78.
Dreamboxen heb ik niet meer echt actief. Verder heb ik ook nog een een VU+ duo2 met 500Gb harddisk + een VU+ Uno, Zero, Solo 4K, Ultimo 4K, Zero 4K, Uno 4Kse. + ook nog een Xtrend ET7x00. Daarnaast heb ik ook nog diverse andere modellen w.o. een Formuler F4, ET8500, ET7500, Mut@nt 2400HD, Xsarius Fusion HD se en verder nog wel het e.e.a. waarmee op verzoek vanalles wordt getest. Iemand moet het tenslotte doen. 
Los van de eerder genoemde modellen heb ik nog wel een rits aan testsamples als Mut@nt 2400HD, HD60, GB UE4K, GB Trio4K, Maxitec Multibox combo en Twin, Octagon sf8008, sf8008 mini en last but nog least enkele modellen van het Grieks Duitse Edision.
Voor centrale opslag van media gebruik ik een Qnap 219P met tweemaal 2 Tb harddisks + een Synology DS414 met 12 Tb Totale opslag.
-------------------------------------------------------------------------------------------
Many answers to your question can be found in our wiki: Just one click away from this "solutioncentre".
Als ik alles al wist hoefde ik ook niets te vragen. If I had all the knowledge I had no questions at all.
Posted 2 November 2015 - 14:19
It seems to be related to the speed of detection and mounting. The bootloader only waits for a short time to see if USB media is present. Size is not really relevant altought smaller sticks seem to be detected faster.
I have an old 256Mb stick that I use for flashing boxes, and sofar it works fine with all of them.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 2 November 2015 - 14:59
Thanks, just tried also an old 256MB, but no luck.
Is your force.update file also empty as my is ?
Posted 2 November 2015 - 17:22
I don't have a Solo SE, but as far as I know it doesn't have/use a button to start the flash, so you have to use the force.update file. It's contents is not relevant, it just has to exist.
If you have other USB devices connected, disconnect them before you power up the box, that might also cause your stick not to be recognised.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
VuSolo2 Flash bricht abStarted by snake.bite, 25 Aug 2024  vu+, solo2, flash, image
|
|
|
||
how to flash openpli via ssh on a vti-image?Started by AllMassive, 3 Mar 2024 ofgwrite, mtd, flash, vti
|
|
|
||
Change from openvix to openpli - lose existing hdd recordings?Started by xdoktor, 30 Dec 2023 openpli, openvix, hdd, recordings
|
|
|
||
Having Trouble While Installing This SoftwareStarted by CharleyDavis, 27 Jun 2023 OpenPLi
|
|
|
||
Vu+ Duo4K SE - ne boot pas sur USBStarted by Lodu971, 11 Feb 2023 Duo4K, Flash
|
|
|
0 members, 9 guests, 0 anonymous users
