Make a big surprise to all of us whith open pli 5.0
wait and se.
VU Solo 4k support
Started by Rob van der Does, 15 Oct 2015 09:52
644 replies to this topic
Re: VU Solo 4k support #321
-
- Senior Member
- 69 posts
0
Neutral
Posted 15 January 2016 - 18:17
Re: VU Solo 4k support #322
-
- Member
- 14 posts
0
Neutral
Posted 15 January 2016 - 18:30
can it be a openpli 5.0?
i think so
OpenPLi-5.0-beta with gstreamer 1.6.2
Re: VU Solo 4k support #323
-
- PLi® Core member
- 46,969 posts
+541
Excellent
Posted 16 January 2016 - 15:48
It is always good to have a positive attitude and have high hopes 
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Re: VU Solo 4k support #324
-
- Member
- 9 posts
0
Neutral
Posted 19 January 2016 - 13:01
Hi,
Seems to be Vu+ had ChromiumOS that is very great news, but i have a question :
Does it build with Widevine CDM Library?
Thanks
Re: VU Solo 4k support #325
-
- Senior Member
- 37 posts
0
Neutral
Posted 27 January 2016 - 14:17
Looking soooooo much forward to a PLI image for my VU+ 4K .... can't hardly wait (current alternatives are more or less ok, but definitely not so smooth)
Re: VU Solo 4k support #326
-
- PLi® Core member
- 10,192 posts
+346
Excellent
Posted 27 January 2016 - 14:20
GigaBlue UHD Quad 4K /Lunix3-4K/Duo 4K
Re: VU Solo 4k support #327
-
- PLi® Core member
- 69,930 posts
+1,788
Excellent
Posted 27 January 2016 - 15:05
There are (were) serious shortcomings when it comes to the special features of the Solo 4K, especially with regards to the FBC tuners. We want to address those before we release.
Other images haven't adressed those shortcomings, they just released a standard E2 image.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: VU Solo 4k support #328
-
- Senior Member
- 7,766 posts
+184
Excellent
Posted 27 January 2016 - 15:08
Other images haven't addressed those shortcomings, they just released a standard E2 image.
That is not correct. They put a lot of effort in development to fully support this box.
I'm not sure though if they fully succeeded in that; as I don't have the box I can't test that. But then again: software is never flawless.
Re: VU Solo 4k support #329
-
- PLi® Core member
- 8,458 posts
+327
Excellent
Posted 27 January 2016 - 15:31
They put a lot of effort in development to fully support this box.
Can you point me the improvements they made? Because I saw only blindly copy-pasting original VU+ code!
Wavefield T90: 0.8W - 1.9E - 4.8E - 13E - 16E - 19.2E - 23.5E - 26E - 33E - 39E - 42E - 45E on EMP Centauri DiseqC 16/1
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916
Re: VU Solo 4k support #330
-
- Senior Member
- 7,766 posts
+184
Excellent
Posted 27 January 2016 - 17:54
For which image did you see that?
Re: VU Solo 4k support #331
-
- PLi® Core member
- 8,458 posts
+327
Excellent
Posted 27 January 2016 - 20:00
For which image did you see that?
Examples:
Original VU+ code: http://code.vuplus.c...e19;hb=HEAD#l62
OpenaATV: https://github.com/o...dvb/fbc.cpp#L62
OpenVIX: https://github.com/O...dvb/fbc.cpp#L62
OpenSPA: https://github.com/O...dvb/fbc.cpp#L62
OpenHDF: https://github.com/o...dvb/fbc.cpp#L62
Edited by athoik, 27 January 2016 - 20:00.
Wavefield T90: 0.8W - 1.9E - 4.8E - 13E - 16E - 19.2E - 23.5E - 26E - 33E - 39E - 42E - 45E on EMP Centauri DiseqC 16/1
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916
Re: VU Solo 4k support #332
-
- Senior Member
- 7,766 posts
+184
Excellent
Posted 27 January 2016 - 21:59
Hehe, you're only pointing to the initial 4K-support commit; just as PLi simply accepts the VU BSD-update.
Have you seen what has been done later on?
Edited by Rob van der Does, 27 January 2016 - 21:59.
Re: VU Solo 4k support #333
-
- PLi® Core member
- 8,458 posts
+327
Excellent
Posted 27 January 2016 - 22:33
Have you seen what has been done later on?
Regarding FBC/Enigma2 code, nothing, not even the obvious bug I am pointing somebody bothered to fix.
Anyway if you have some commits, improvements to point, please share them.
Wavefield T90: 0.8W - 1.9E - 4.8E - 13E - 16E - 19.2E - 23.5E - 26E - 33E - 39E - 42E - 45E on EMP Centauri DiseqC 16/1
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916
Re: VU Solo 4k support #334
-
- Senior Member
- 7,766 posts
+184
Excellent
Posted 28 January 2016 - 06:19
Of course it's very well possible that you found a bug that nobody else found (or could fix). I'm not in a position to judge or question that.
Edited by Rob van der Does, 28 January 2016 - 06:20.
Re: VU Solo 4k support #335
-
- PLi® Core member
- 14,054 posts
+298
Excellent
Posted 28 January 2016 - 10:10
Regarding FBC/Enigma2 code, nothing, not even the obvious bug I am pointing somebody bothered to fix.
I guess I missed that patch or pull request, do you have a link?
Real musicians never die - they just decompose
Re: VU Solo 4k support #336
-
- PLi® Core member
- 8,458 posts
+327
Excellent
Posted 28 January 2016 - 10:28
Regarding FBC/Enigma2 code, nothing, not even the obvious bug I am pointing somebody bothered to fix.
I guess I missed that patch or pull request, do you have a link?
It is already fixed on our solo4k experimental branch: https://github.com/O...dvb/fbc.cpp#L41
This bug exists in original FBC code and all other teams didn't bother to fix. They just copy/pasted original code without further improvements.
Wavefield T90: 0.8W - 1.9E - 4.8E - 13E - 16E - 19.2E - 23.5E - 26E - 33E - 39E - 42E - 45E on EMP Centauri DiseqC 16/1
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916
Re: VU Solo 4k support #337
-
- PLi® Core member
- 56,965 posts
+696
Excellent
Posted 28 January 2016 - 12:18
We'll see -if- or -when- the "other images" will have FBC tuner functionality as intended.....
Edited by littlesat, 28 January 2016 - 12:18.
WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W
Re: VU Solo 4k support #338
-
- PLi® Contributor
- 6,155 posts
+261
Excellent
Posted 28 January 2016 - 15:16
Hi,
Can you highlight us on the FBC functionnalities that are not working as expected?
A friend of mine purchase a Unicable LNB for testing and this is what he found:
- the Solo4K takes for itself all the available channels of the Unicable LNB, I guess it shouldn't.
- behind a DiseqC switch the unicable tuner behaves like a "normal" universal LNB so we lose the unicable advantages.
Are you refering to those problems?
My friend use BlackHole.
I use OpenATV on my Solo4K but I don't have unicable LNB.
I saw that the "grab" application has been adapted to support the Solo4K CPU but the grab is still limited to 1080, should be adapted to support UHD.
Pr2
Edited by Pr2, 28 January 2016 - 15:21.
NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.
Wanna help with OpenPLi Translation? Please read our Wiki Information for translators
Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)
AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
Re: VU Solo 4k support #339
-
- PLi® Core member
- 56,965 posts
+696
Excellent
Posted 28 January 2016 - 16:11
For unicable stuff the thinks do not really differ... the biggest change is related to the loop through behavior...
WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W
Re: VU Solo 4k support #340
-
- Senior Member
- 7,766 posts
+184
Excellent
Posted 28 January 2016 - 16:30
- the Solo4K takes for itself all the available channels of the Unicable LNB, I guess it shouldn't.
I think it should.
A standard Unicable LNB has 8 frequencies and the Solo 4K has two FBC-tuners. Each of them behaves like one tuner with three looped through tuners, so that makes indeed a total of eight tuners.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
