985 replies to this topic

[Pr2]

@rantanplan,  thanks but I already know what you explain here.

So I always use exteplayer3 by default (setting lile this in ServiceApp) for all my IPTV streams so I just report that the one given here is the the only one that doesn't work. I have to change its definition to 4097 to have it working.

And I know that Duo4K is not HiSi based STB, but I was finding interesting to test it too on my STB and report the result here.

[miozalouk]

Hello sir
Could you please help us by adding ram buffer option in serviceapp menu on exteplayer3 option

It has the following argument - b
Thanks sir

[Pr2]

Hi,

 

When inserting IPTV channels into your userbouquet/favorite list replace the last 0 with 3 (exemple:   :0:http%3A//  with :3:http%3A// )  this will enable buffering.

 

Regards,

 

Pr2

[miozalouk]

have done that sir and its still dosnet work

 

 

#NAME Streaming
#SERVICE 5002:0:1:0:0:0:0:0:0:3:http%3A%2F%2Fs2.server948.akoams.com%2Fdl%2F1572556452%2FAl.Wad.Sayed.Al_Shahat.E20.HD.akoam.net.mkv:Streaming
 

[Pr2]

You don't have to replace the / with %2F only the : must be replaced by %3A

So give it a try with:

 

http%3A//s2.server948.akoams.com/dl/1572556452/Al.Wad.Sayed.Al_Shahat.E20.HD.akoam.net.mkv

[miozalouk]

#NAME Streaming #SERVICE 5002:0:1:0:0:0:0:0:0:3:http%3A//s2.server948.akoams.com/dl/1572556452/Al.Wad.Sayed.Al_Shahat.E20.HD.akoam.net.mkv:Streaming Still doesn't work sir

[Pr2]

Link is no longer working in VLC so I cannot test sorry.

[neoneuf]

Hi,

some IPTV streams stop playing after few seconds.

In VLC there is a possibility to play a stream in loop which allows to restart the playing everytime it is stopped.

Is there any way to have the same thing with GstPlayer or ExtEplayer3 ?

Thanks.

[miozalouk]

yoi can try with this file sir

 

http://techslides.co...ples/sample.mp4

 

 

thanks

[ident4site]

Hi,

Is there a way to check that "ExtPlayer3" is used when I'm watching a service starting with 5002?

Indeed, each time I'm executing the ps command, I can only see "/usr/bin/streamproxy" for a service starting by 1 or by 5002. Is it normal?

 

My configuration is the following:

  - Vu Uno 4K SE with openPli 7.1

  - serviceApp installed (see the config in attachment)

  - userBouquet.tv with one service starting with 5002

 

Thanks for your help

Attached Files

•  ServiceApp01.png   185.87KB   16 downloads
•  ServiceApp02.png   175.17KB   15 downloads

[mrvica]

just input "ps" in Telnet

[ident4site]

Ok but ExtPlayer3 seems never launched because, as explained, I can only see streamproxy when I’m checking the process list via ps!!!!!
Is there a way to check if everything has been correctly installed?

Moreover, following my understanding and my configuration (see serviceApp config in my previous msg) ExtPlayer3 should always be used; even with non IP stream. Is it correct?

[mrvica]

did you try exteplayer3 form command line, could be some lib (link) missing

Edited by mrvica, 5 November 2019 - 07:55.

[ident4site]

did you try exteplayer3 form command line, could be some lib (link) missing

 

It is working correctly (see the execution of the command in the attachment).

Seems more and more that something is wrong in the configuration of ServiceApp...

 

Can you confirm that the binary must be launched with DVB and IPTV stream?

What is the streamproxy binary? is it the default player?

[mrvica]

you can check it this way, go to MovieSelection, highlight a movie file, open Context menu (menu key), play with exteplayer3

[ident4site]

you can check it this way, go to MovieSelection, highlight a movie file, open Context menu (menu key), play with exteplayer3

 

It is working - By specifying the Ext2Player3 in the menu context, I can played the video (see attachment)

The correct players is launched (I can see it in the process list) and I can see the mkv...

For information, it is also working with the gstplayer...

 

I'm now a little bit lost...Seems my issue related to a configuration issue; May be my userbouquet.tv?

 

is serviceApp checking only the service at the beginning of the line or something else?

In my userbouquet.tv, each service is defined with the following syntax:

#SERVICE 5002:0:1:0:0:0:0:0:0:0:[url without extension (.ts)]

#DESCRIPTION Channel name

Attached Files

•  Jellyfish - ExtePlayer3.png   74.42KB   10 downloads

Edited by ident4site, 5 November 2019 - 19:20.

[rantanplan]

For me that looks like a mistake on your part.
If you activate Serviceapp, then set the exteplayer3 there, this is available as default to the system.
default is 4097.
You have a modified list that probably comes from installed service app, but without customization.
So internal remains default gstreamer 4097.

Such a list is in my view always a bit confusing.
You should always use only 4097 and make the adjustments yourself via Serviceapp.

[ident4site]

Didn't understand what's happened but now, after few tests were I played movies and one reboot, extePlayer3 is correctly started.

I can see it in the list of processes when an IPTV stream is selected and it stops for a DVB channel.

I changed nothing in my userbouquet.tv and in the service app config. I really don't like this kind of things... Really strange ;-(

 

However, meantimes, I can ask more details about the optimisations of extePlayer3.

 - How can we change buffering?

 - How can we optimize the player if the IPTV stream is a little bit slow? what are all the available optimisations?

 - Where do we have to do them (Globally or per stream)?

 

Thanks again for your help

[Pr2]

Change this:

 

#SERVICE 5002:0:1:0:0:0:0:0:0:0:[url without extension (.ts)]

 

Into:

 

#SERVICE 5002:0:1:0:0:0:0:0:0:3:[url without extension (.ts)]

[ident4site]

Change this:

 

#SERVICE 5002:0:1:0:0:0:0:0:0:0:[url without extension (.ts)]

 

Into:

 

#SERVICE 5002:0:1:0:0:0:0:0:0:3:[url without extension (.ts)]

 

Can you explain the meaning of this field?