Jump to content


Photo

serviceapp - gstplayer and exteplayer3

gstreamer ffmpeg

  • Please log in to reply
985 replies to this topic

Re: serviceapp - gstplayer and exteplayer3 #101 taljaka

  • Member
  • 9 posts

0
Neutral

Posted 4 August 2016 - 06:54

tonight I can post an example link.
thanks already now!

Re: serviceapp - gstplayer and exteplayer3 #102 saintomer1866

  • Senior Member
  • 48 posts

+2
Neutral

Posted 4 August 2016 - 08:06

Thanks mx3l,

I'm still struggling to get my head around this and I'm sure that I'm probably just over complicating things

 

I have setup the enviroment by using;

export PATH=/home/openatvbuilder/openatv/build-enviroment/bitbake/bin:$PATH

Your serviceapp folder (named 'serviceapp') is located at;

/home/openatvbuilder/openatv/build-enviroment/meta-local/recipes-local

I have edited the layer.conf file located at;

/home/openatvbuilder/openatv/build-enviroment/meta-local/conf

to this;

# We have a recipes directory, add to BBFILES
BBFILES += "${LAYERDIR}/recipes-*/*/*.bb ${LAYERDIR}/recipes-*/*/*.bbappend"

BBFILE_COLLECTIONS += "serviceapp"
BBFILE_PATTERN_serviceapp := "^${LAYERDIR}/"
BBFILE_PRIORITY_serviceapp = "5"

I'm unsure of the correct paths for setting BBPATH,

so at the moment I have it set to;

export BBPATH=path to layers.conf config dir:path to bitbake.conf config dir

export BBPATH=/home/openatvbuilder/openatv/build-enviroment/meta-local:/home/openatvbuilder/openatv/build-enviroment/openembedded-core/meta

When I run;

MACHINE=vusolo2 bitbake enigma2-plugin-extensions-serviceapp

I get the following errors;

Traceback (most recent call last):
  File "/home/openatvbuilder/openatv/build-enviroment/openembedded-core/meta/classes/sanity.bbclass", line 1003, in check_sanity_eventhandler(e=<bb.event.SanityCheck object at 0x7fc704d13690>):
                 sanity_data.setVar("SANITY_USE_EVENTS", "1")
    >        reparse = check_sanity(sanity_data)
             e.data.setVar("BB_INVALIDCONF", reparse)
  File "/home/openatvbuilder/openatv/build-enviroment/openembedded-core/meta/classes/sanity.bbclass", line 962, in check_sanity(sanity_data=<bb.data_smart.DataSmart object at 0x7fc704d13650>):

    >    check_sanity_everybuild(status, sanity_data)

  File "/home/openatvbuilder/openatv/build-enviroment/openembedded-core/meta/classes/sanity.bbclass", line 849, in check_sanity_everybuild(status=<SanityStatus object at 0x7fc704d13450>, d=<bb.data_smart.DataSmart object at 0x7fc704d13650>):
         oeroot = d.getVar('COREBASE', True)
    >    if oeroot.find('+') != -1:
             status.addresult("Error, you have an invalid character (+) in your COREBASE directory path. Please move the installation to a directory which doesn't include any + characters.")
AttributeError: 'NoneType' object has no attribute 'find'

I am using debian 8 (64bit)

 

Hoping that's enough information for you to see where I'm going wrong

many thanks,

 

St.O

 

 



Re: serviceapp - gstplayer and exteplayer3 #103 mx3L

  • Senior Member
  • 616 posts

+79
Good

Posted 4 August 2016 - 11:07

@saintomer1866

1. revert changes made in layer.conf

2. run 'make' in your build-environment directory for initial setup, at the end you should get message with expanded BUILD_DIR and DISTRO variables:

	@echo "cd $(BUILD_DIR) ; source env.source ; bitbake $(DISTRO)-image"

So use this command but replace $(DISTRO)-image with enigma2-plugin-extensions-serviceapp



Re: serviceapp - gstplayer and exteplayer3 #104 saintomer1866

  • Senior Member
  • 48 posts

+2
Neutral

Posted 4 August 2016 - 18:26

Thanks mx3L,

left it building today but it's returned an error;

| DEBUG: SITE files ['endian-little', 'bit-32', 'mips-common', 'common-linux', 'common-glibc', 'mipsel-linux', 'common']
| DEBUG: Executing shell function do_install
| NOTE: make -j 2 DESTDIR=/home/openatvbuilder/openatv/build-enviroment/builds/openatv/release//tmp/work/mips32el-oe-linux/enigma2-plugin-extensions-serviceapp/0.3-r0/image install
| Making install in src
| make[1]: Entering directory '/home/openatvbuilder/openatv/build-enviroment/builds/openatv/release/tmp/work/mips32el-oe-linux/enigma2-plugin-extensions-serviceapp/0.3-r0/build/src'
| Making install in serviceapp
| make[2]: Entering directory '/home/openatvbuilder/openatv/build-enviroment/builds/openatv/release/tmp/work/mips32el-oe-linux/enigma2-plugin-extensions-serviceapp/0.3-r0/build/src/serviceapp'
| make[3]: Entering directory '/home/openatvbuilder/openatv/build-enviroment/builds/openatv/release/tmp/work/mips32el-oe-linux/enigma2-plugin-extensions-serviceapp/0.3-r0/build/src/serviceapp'
| make[3]: Nothing to be done for 'install-exec-am'.
|  /bin/mkdir -p '/home/openatvbuilder/openatv/build-enviroment/builds/openatv/release//tmp/work/mips32el-oe-linux/enigma2-plugin-extensions-serviceapp/0.3-r0/image/usr/lib/enigma2/python/Plugins/Extensions/ServiceApp'
|  ../../mipsel-oe-linux-libtool   --mode=install /usr/bin/install -c   serviceapp.la '/home/openatvbuilder/openatv/build-enviroment/builds/openatv/release//tmp/work/mips32el-oe-linux/enigma2-plugin-extensions-serviceapp/0.3-r0/image/usr/lib/enigma2/python/Plugins/Extensions/ServiceApp'
| mipsel-oe-linux-libtool: install: /usr/bin/install -c .libs/serviceapp.so /home/openatvbuilder/openatv/build-enviroment/builds/openatv/release//tmp/work/mips32el-oe-linux/enigma2-plugin-extensions-serviceapp/0.3-r0/image/usr/lib/enigma2/python/Plugins/Extensions/ServiceApp/serviceapp.so
| mipsel-oe-linux-libtool: install: /usr/bin/install -c .libs/serviceapp.lai /home/openatvbuilder/openatv/build-enviroment/builds/openatv/release//tmp/work/mips32el-oe-linux/enigma2-plugin-extensions-serviceapp/0.3-r0/image/usr/lib/enigma2/python/Plugins/Extensions/ServiceApp/serviceapp.la
| mipsel-oe-linux-libtool: warning: remember to run 'mipsel-oe-linux-libtool --finish /usr/lib/enigma2/python/Plugins/Extensions/ServiceApp'
| make[3]: Leaving directory '/home/openatvbuilder/openatv/build-enviroment/builds/openatv/release/tmp/work/mips32el-oe-linux/enigma2-plugin-extensions-serviceapp/0.3-r0/build/src/serviceapp'
| make[2]: Leaving directory '/home/openatvbuilder/openatv/build-enviroment/builds/openatv/release/tmp/work/mips32el-oe-linux/enigma2-plugin-extensions-serviceapp/0.3-r0/build/src/serviceapp'
| Making install in plugin
| make[2]: Entering directory '/home/openatvbuilder/openatv/build-enviroment/builds/openatv/release/tmp/work/mips32el-oe-linux/enigma2-plugin-extensions-serviceapp/0.3-r0/build/src/plugin'
| make[3]: Entering directory '/home/openatvbuilder/openatv/build-enviroment/builds/openatv/release/tmp/work/mips32el-oe-linux/enigma2-plugin-extensions-serviceapp/0.3-r0/build/src/plugin'
| make[3]: Nothing to be done for 'install-exec-am'.
|  /bin/mkdir -p '/home/openatvbuilder/openatv/build-enviroment/builds/openatv/release//tmp/work/mips32el-oe-linux/enigma2-plugin-extensions-serviceapp/0.3-r0/image/usr/lib/enigma2/python/Plugins/Extensions/ServiceApp'
|  /usr/bin/install -c -m 644 ../../../git/src/plugin/__init__.py ../../../git/src/plugin/plugin.py ../../../git/src/plugin/serviceapp_client.py '/home/openatvbuilder/openatv/build-enviroment/builds/openatv/release//tmp/work/mips32el-oe-linux/enigma2-plugin-extensions-serviceapp/0.3-r0/image/usr/lib/enigma2/python/Plugins/Extensions/ServiceApp'
| Byte-compiling python modules (optimized versions) ...
| __init__.pyplugin.pyserviceapp_client.py
| make[3]: Leaving directory '/home/openatvbuilder/openatv/build-enviroment/builds/openatv/release/tmp/work/mips32el-oe-linux/enigma2-plugin-extensions-serviceapp/0.3-r0/build/src/plugin'
| make[2]: Leaving directory '/home/openatvbuilder/openatv/build-enviroment/builds/openatv/release/tmp/work/mips32el-oe-linux/enigma2-plugin-extensions-serviceapp/0.3-r0/build/src/plugin'
| make[2]: Entering directory '/home/openatvbuilder/openatv/build-enviroment/builds/openatv/release/tmp/work/mips32el-oe-linux/enigma2-plugin-extensions-serviceapp/0.3-r0/build/src'
| make[3]: Entering directory '/home/openatvbuilder/openatv/build-enviroment/builds/openatv/release/tmp/work/mips32el-oe-linux/enigma2-plugin-extensions-serviceapp/0.3-r0/build/src'
| make[3]: Nothing to be done for 'install-exec-am'.
| make[3]: Nothing to be done for 'install-data-am'.
| make[3]: Leaving directory '/home/openatvbuilder/openatv/build-enviroment/builds/openatv/release/tmp/work/mips32el-oe-linux/enigma2-plugin-extensions-serviceapp/0.3-r0/build/src'
| make[2]: Leaving directory '/home/openatvbuilder/openatv/build-enviroment/builds/openatv/release/tmp/work/mips32el-oe-linux/enigma2-plugin-extensions-serviceapp/0.3-r0/build/src'
| make[1]: Leaving directory '/home/openatvbuilder/openatv/build-enviroment/builds/openatv/release/tmp/work/mips32el-oe-linux/enigma2-plugin-extensions-serviceapp/0.3-r0/build/src'
| make[1]: Entering directory '/home/openatvbuilder/openatv/build-enviroment/builds/openatv/release/tmp/work/mips32el-oe-linux/enigma2-plugin-extensions-serviceapp/0.3-r0/build'
| make[2]: Entering directory '/home/openatvbuilder/openatv/build-enviroment/builds/openatv/release/tmp/work/mips32el-oe-linux/enigma2-plugin-extensions-serviceapp/0.3-r0/build'
| make[2]: Nothing to be done for 'install-exec-am'.
| make[2]: Nothing to be done for 'install-data-am'.
| make[2]: Leaving directory '/home/openatvbuilder/openatv/build-enviroment/builds/openatv/release/tmp/work/mips32el-oe-linux/enigma2-plugin-extensions-serviceapp/0.3-r0/build'
| make[1]: Leaving directory '/home/openatvbuilder/openatv/build-enviroment/builds/openatv/release/tmp/work/mips32el-oe-linux/enigma2-plugin-extensions-serviceapp/0.3-r0/build'
| rm: cannot remove '/home/openatvbuilder/openatv/build-enviroment/builds/openatv/release//tmp/work/mips32el-oe-linux/enigma2-plugin-extensions-serviceapp/0.3-r0/image/usr/lib/enigma2/python/Plugins/Extensions/ServiceApp/*.pyc': No such file or directory
| WARNING: /home/openatvbuilder/openatv/build-enviroment/builds/openatv/release//tmp/work/mips32el-oe-linux/enigma2-plugin-extensions-serviceapp/0.3-r0/temp/run.do_install.24365:1 exit 1 from 'rm /home/openatvbuilder/openatv/build-enviroment/builds/openatv/release//tmp/work/mips32el-oe-linux/enigma2-plugin-extensions-serviceapp/0.3-r0/image/usr/lib/enigma2/python/Plugins/Extensions/ServiceApp/*.pyc'
| ERROR: Function failed: do_install (log file is located at /home/openatvbuilder/openatv/build-enviroment/builds/openatv/release//tmp/work/mips32el-oe-linux/enigma2-plugin-extensions-serviceapp/0.3-r0/temp/log.do_install.24365)
ERROR: Task 2 (/home/openatvbuilder/openatv/build-enviroment/meta-local/recipes-local/serviceapp/enigma2-plugin-extensions-serviceapp_0.3.bb, do_install) failed with exit code '1'

log file attached

 

St.O

 

Attached Files



Re: serviceapp - gstplayer and exteplayer3 #105 saintomer1866

  • Senior Member
  • 48 posts

+2
Neutral

Posted 4 August 2016 - 20:58

sorry just noticed I've upped the wrong file

should be this one

 

St.O

 

Attached Files



Re: serviceapp - gstplayer and exteplayer3 #106 taljaka

  • Member
  • 9 posts

0
Neutral

Posted 4 August 2016 - 21:14

 

Yes, rtmp streams are working. If audio is played it means there should be no problem with rtmp protocol, can you share a link?

#SERVICE 5002:0:1:2:0:0:0:0:0:0:rtmp%3a//rtmp.one.by/HD/1muz:FIRST CHANNEL HD
#DESCRIPTION FIRST CHANNEL HD

here is the example link, a russian music channel

on gstreamer stream works perfectly (5001/4097) - screen

 

5001_0_1_2_0_0_0_0_0_0.jpg



Re: serviceapp - gstplayer and exteplayer3 #107 samsamsam

  • Senior Member
  • 2,024 posts

+146
Excellent

Posted 4 August 2016 - 21:32

@taljaka

 

The question is what FFMPEG libs you are using. Because the ffmpeg has to possibilities FFMPEG can use own simple implementation of RTMP protocol, or use librtmp.

It depend how it was build. 

gstreamer use librtmp. 

 

Any way this stream not play for me in both exteplayer3 nor gstplayer.

 

But, I was able to play it without any problem in IPTVPlayer in both exteplayer3 and gstplayer with buffering mode.  

 

Regards,

SSS 


Edited by samsamsam, 4 August 2016 - 21:33.


Re: serviceapp - gstplayer and exteplayer3 #108 saintomer1866

  • Senior Member
  • 48 posts

+2
Neutral

Posted 4 August 2016 - 22:34

Hi mx3L,

just an update,

still have that error when building so hopefully you can guide me with solving that

 

on the upside the plugin has been built (although it hasn't got as far as the ipk)

so i have done a manual install of it along with ffmpeg, gstreamerplayer (says its not installed, maybe wrong gstreamer version in atv ? will try building that when serviceapp is sorted) exteplayer3

serviceapp and exteplayer3 are working fine :)

 

so we are making progress

 

St.O

 



Re: serviceapp - gstplayer and exteplayer3 #109 mx3L

  • Senior Member
  • 616 posts

+79
Good

Posted 5 August 2016 - 10:31

@saintomer1866

 

Use this recipe:

DESCRIPTION = "serviceapp service for enigma2"
AUTHOR = "Maroš Ondrášek <mx3ldev@gmail.com>"
LICENSE = "GPLv2"
LIC_FILES_CHKSUM = "file://COPYING;md5=b234ee4d69f5fce4486a80fdaf4a4263"

DEPENDS = "enigma2"

SRCREV = "cadd53c5941bd114840b0c06e6c688227606ced7"
SRC_URI = "git://github.com/mx3L/serviceapp.git;branch=master"

S = "${WORKDIR}/git"

inherit autotools pythonnative

EXTRA_OECONF = "\
	BUILD_SYS=${BUILD_SYS} \
	HOST_SYS=${HOST_SYS} \
	STAGING_INCDIR=${STAGING_INCDIR} \
	STAGING_LIBDIR=${STAGING_LIBDIR} \
	"

FILES_${PN} = "\ 
	${libdir}/enigma2/python/Plugins/Extensions/ServiceApp/*.pyo \
	${libdir}/enigma2/python/Plugins/Extensions/ServiceApp/serviceapp.so"

FILES_${PN}-dev = "\
	${libdir}/enigma2/python/Plugins/Extensions/ServiceApp/*.py \
	${libdir}/enigma2/python/Plugins/Extensions/ServiceApp/serviceapp.la"

try to run gstplayer in terminal and see what it outputs.



Re: serviceapp - gstplayer and exteplayer3 #110 mx3L

  • Senior Member
  • 616 posts

+79
Good

Posted 5 August 2016 - 10:37

@samsamsam,@taljaka

 

Problem in exteplayer3 is that we have minimal value for max_analyze_duration, I guess for quicker startup.

If we use default value it works:

diff --git a/main/exteplayer.c b/main/exteplayer.c
index ba70ef9..b868e1d 100755
--- a/main/exteplayer.c
+++ b/main/exteplayer.c
@@ -423,7 +423,7 @@ int main(int argc, char* argv[])
     g_player->output->Command(g_player, OUTPUT_ADD, "subtitle");

     g_player->manager->video->Command(g_player, MANAGER_REGISTER_UPDATED_TRACK_INFO, UpdateVideoTrack);
-    g_player->playback->noprobe = 1;
+    g_player->playback->noprobe = 0;

     PlayFiles_t playbackFiles = {file, NULL};
     if('\0' != audioFile[0])



Re: serviceapp - gstplayer and exteplayer3 #111 samsamsam

  • Senior Member
  • 2,024 posts

+146
Excellent

Posted 5 August 2016 - 16:05

@mx3L

So, maybe we should depend this option based on protocol and use it only for rtmp protocols.

 

Regards,

SSS



Re: serviceapp - gstplayer and exteplayer3 #112 saintomer1866

  • Senior Member
  • 48 posts

+2
Neutral

Posted 5 August 2016 - 20:39

Thanks mx3L,

cant test at the moment as opendreambox git seems to be offline, so not even getting as far as building

hopefully it will be ok tomorrow

will let you know as soon as i do

many thanks for all your help so far

I wouldn't be this far without it ;)

 

St.O



Re: serviceapp - gstplayer and exteplayer3 #113 saintomer1866

  • Senior Member
  • 48 posts

+2
Neutral

Posted 6 August 2016 - 07:55

Getting closer,

now failing when trying to write the ipk;

ERROR: base-files-3.0.14-r89.3 do_package_write_ipk: Function failed: opkg-build execution failed
ERROR: Logfile of failure stored in: /home/openatvbuilder/openatv/build-enviroment/builds/openatv/release//tmp/work/-oe-linux/base-files/3.0.14-r89.3/temp/log.do_package_write_ipk.14407
Log data follows:
| DEBUG: Executing python function sstate_task_prefunc
| DEBUG: Python function sstate_task_prefunc finished
| DEBUG: Executing python function do_package_write_ipk
| DEBUG: Executing python function read_subpackage_metadata
| DEBUG: Python function read_subpackage_metadata finished
| DEBUG: Executing python function do_package_ipk
| *** Error: CONTROL/control is missing field Architecture
|
| opkg-build: Please fix the above errors and try again.
| DEBUG: Python function do_package_ipk finished
| DEBUG: Python function do_package_write_ipk finished
| ERROR: Function failed: opkg-build execution failed
ERROR: Task 1722 (/home/openatvbuilder/openatv/build-enviroment/openembedded-core/meta/recipes-core/base-files/base-files_3.0.14.bb, do_package_write_ipk) failed with exit code '1'
NOTE: Tasks Summary: Attempted 2027 tasks of which 2024 didn't need to be rerun and 1 failed.

St.O

 



Re: serviceapp - gstplayer and exteplayer3 #114 MastaG

  • Senior Member
  • 1,531 posts

+118
Excellent

Posted 10 August 2016 - 13:57

Hi mx3L,

 

What's the status of your serviceapp project?

Are you planning to eventually merge it into servicemp3?



Re: serviceapp - gstplayer and exteplayer3 #115 saintomer1866

  • Senior Member
  • 48 posts

+2
Neutral

Posted 16 August 2016 - 14:10

Getting closer,

now failing when trying to write the ipk;

ERROR: base-files-3.0.14-r89.3 do_package_write_ipk: Function failed: opkg-build execution failed
ERROR: Logfile of failure stored in: /home/openatvbuilder/openatv/build-enviroment/builds/openatv/release//tmp/work/-oe-linux/base-files/3.0.14-r89.3/temp/log.do_package_write_ipk.14407
Log data follows:
| DEBUG: Executing python function sstate_task_prefunc
| DEBUG: Python function sstate_task_prefunc finished
| DEBUG: Executing python function do_package_write_ipk
| DEBUG: Executing python function read_subpackage_metadata
| DEBUG: Python function read_subpackage_metadata finished
| DEBUG: Executing python function do_package_ipk
| *** Error: CONTROL/control is missing field Architecture
|
| opkg-build: Please fix the above errors and try again.
| DEBUG: Python function do_package_ipk finished
| DEBUG: Python function do_package_write_ipk finished
| ERROR: Function failed: opkg-build execution failed
ERROR: Task 1722 (/home/openatvbuilder/openatv/build-enviroment/openembedded-core/meta/recipes-core/base-files/base-files_3.0.14.bb, do_package_write_ipk) failed with exit code '1'
NOTE: Tasks Summary: Attempted 2027 tasks of which 2024 didn't need to be rerun and 1 failed.

St.O

 

 

 

 

I still can't find a way of fixing this so I'm hoping that somebody here can help me out

I know what's missing but cannot find where to correct it

 

 

St.O


Edited by saintomer1866, 16 August 2016 - 14:12.


Re: serviceapp - gstplayer and exteplayer3 #116 foxbob

  • Senior Member
  • 624 posts

+18
Neutral

Posted 18 August 2016 - 04:27

Ned help.I am build exteplayer3_28 and ffmpeg 3.1.1 and gcc 6.1.1-error build

 DEBUG: Executing shell function do_compile
| output/writer/mipsel/writer.c: In function 'write_with_retry':
| output/writer/mipsel/writer.c:99:28: warning: implicit declaration of function 'PlaybackDieNow' [-Wimplicit-function-declaration]
|      while(size > 0 && 0 == PlaybackDieNow(0))
|                             ^~~~~~~~~~~~~~
| output/writer/mipsel/pcm.c:42:32: fatal error: libavcodec/avcodec.h: No such file or directory
|  #include <libavcodec/avcodec.h>
|                                 ^
| compilation terminated.
| output/writer/mipsel/lpcm.c:42:32: fatal error: libavcodec/avcodec.h: No such file or directory
|  #include <libavcodec/avcodec.h>
|                                 ^
| compilation terminated.
| manager/audio.c:27:34: fatal error: libavformat/avformat.h: No such file or directory
|  #include <libavformat/avformat.h>
|                                   ^
| compilation terminated.
| container/container_ffmpeg.c:47:34: fatal error: libavformat/avformat.h: No such file or directory
|  #include <libavformat/avformat.h>
|                                   ^
| compilation terminated.
| WARNING: /home/boris/test/vuplus-fulan-openpli-oe-core/build/tmp/work/mips32el-oe-linux/exteplayer3/28-r0/temp/run.do_compile.13322:1 exit 1 from 'mipsel-oe-linux-gcc -mel -mabi=32 -mhard-float -march=mips32 --sysroot=/home/boris/test/vuplus-fulan-openpli-oe-core/build/tmp/sysroots/vusolo2 output/linuxdvb_mipsel.c output/writer/mipsel/writer.c output/writer/mipsel/aac.c output/writer/mipsel/ac3.c output/writer/mipsel/mp3.c output/writer/mipsel/pcm.c output/writer/mipsel/lpcm.c output/writer/mipsel/dts.c output/writer/mipsel/amr.c output/writer/mipsel/wma.c output/writer/mipsel/h264.c output/writer/mipsel/h263.c output/writer/mipsel/mpeg2.c output/writer/mipsel/mpeg4.c output/writer/mipsel/divx3.c output/writer/mipsel/vc1.c playback/playback.c output/writer/common/misc.c output/writer/common/pes.c output/output.c output/output_subtitle.c manager/subtitle.c manager/video.c manager/audio.c manager/manager.c container/container_ffmpeg.c container/container.c main/exteplayer.c -D_FILE_OFFSET_BITS=64 -D_LARGEFILE64_SOURCE -D_LARGEFILE_SOURCE -I/home/boris/test/vuplus-fulan-openpli-oe-core/build/tmp/work/mips32el-oe-linux/exteplayer3/28-r0/git//include -I/home/boris/test/vuplus-fulan-openpli-oe-core/build/tmp/work/mips32el-oe-linux/exteplayer3/28-r0/image//usr/lib -I/home/boris/test/vuplus-fulan-openpli-oe-core/build/tmp/work/mips32el-oe-linux/exteplayer3/28-r0/image//usr/include -lpthread -lavformat -lavcodec -lavutil -lswresample -o exteplayer3'
but ffmpeg 3.0.2 build is ok.


Re: serviceapp - gstplayer and exteplayer3 #117 Taapat

  • PLi® Core member
  • 2,345 posts

+121
Excellent

Posted 20 August 2016 - 10:06

If you are using bb file from openembedded-core, or you specified avcodec and avformat in ffmpeg PACKAGECONFIG?



Re: serviceapp - gstplayer and exteplayer3 #118 MastaG

  • Senior Member
  • 1,531 posts

+118
Excellent

Posted 22 August 2016 - 20:48

Looks like serviceapp and exteplayer3 will be part of oe-alliance based images as well :)

https://github.com/o...7ca601e1c086848

 

EDIT:

At least it'll be in the feeds..


Edited by MastaG, 22 August 2016 - 20:49.


Re: serviceapp - gstplayer and exteplayer3 #119 saintomer1866

  • Senior Member
  • 48 posts

+2
Neutral

Posted 23 August 2016 - 07:32

Thanks for the Info MastaG,

confirmed, now available for download with ATV :)

 

Really good news that they are now including samsamsam's and mx3L's great work.


Edited by saintomer1866, 23 August 2016 - 07:34.


Re: serviceapp - gstplayer and exteplayer3 #120 doubledip

  • Senior Member
  • 334 posts

+7
Neutral

Posted 23 August 2016 - 12:43

Is someone able to play this steam? it is ok in vlc player.

http://ocs-live.hls.adaptive.level3.net/ocs/channel01/NBC_OCS1_VIDEO_6_3514000.m3u8

Edited by doubledip, 23 August 2016 - 12:43.




9 user(s) are reading this topic

0 members, 8 guests, 0 anonymous users


    Bing (1)