Thank you!
7 days is lovely to have - if I have problems with the import - I have several days to solve the problem
Regards Hans
Posted 20 September 2017 - 12:41
The grabber needed maintenance. (website had a couple changes)
The new grab is running. This will take some time, since a lot of data has to be grabbed - a full schedule.
I will upload the new file asap today. (But count on a couple of hours)
Willy
~~Rytec Team~~
Maxytec Multibox SE OpenPli (used as mediaplayer)
Mutant HD2400 OpenPli
Vu+ Duo OpenPli (backup)
Synology NAS
Sat: 13E, 19.2E, 23.5E and 28.2E
*Pli/Rytec EPG POWERED*
Posted 20 September 2017 - 20:15
I think i worked out where the links are held.
I have lines like:Rytec-NORDIC,ext_dat,http://www.vuplus-co...g.dat.gz,7,none
Posted 20 September 2017 - 20:38
Found some info on the change of format and the need of updating the BH image.
So i gess this is the way to go, as it looks like the old DL links will be outdated soon.
I will look into that, when i have some extra time to do a new flash and setup.
Best regards
erojohn
Posted 21 September 2017 - 07:40
I think i worked out where the links are held.
and so on.
But i dont see any misc links.Is there somewhere a list of links, so i can add those i want myself?Best regardserojohn.
Pls. use XMLTVimport (or EPGimport). The support for epg.dat files comes to an end at 22/9/2017 - This Saturday BTW.
BH supports this plug-in also.
Willy
~~Rytec Team~~
Maxytec Multibox SE OpenPli (used as mediaplayer)
Mutant HD2400 OpenPli
Vu+ Duo OpenPli (backup)
Synology NAS
Sat: 13E, 19.2E, 23.5E and 28.2E
*Pli/Rytec EPG POWERED*
Posted 5 October 2017 - 20:09
Hello Doglover
I saw your kind post in BH epg forum aug 29 regarding Rytec epg, so I try her for help
I have BH 3.0.4 A and use Crossepg. Rytec XMLTV xz Norway and Sweden is working good, epg for 1 week. But Denmark XMLTV xz is not working, no epg.
can you help.
Best regards
Erik
Posted 6 October 2017 - 09:14
I do not have Crossepg, so I cannot check this.
On XMLTVimport/EPGimport these are working.
Willy
~~Rytec Team~~
Maxytec Multibox SE OpenPli (used as mediaplayer)
Mutant HD2400 OpenPli
Vu+ Duo OpenPli (backup)
Synology NAS
Sat: 13E, 19.2E, 23.5E and 28.2E
*Pli/Rytec EPG POWERED*
Posted 6 October 2017 - 12:04
I do not have Crossepg, so I cannot check this.
On XMLTVimport/EPGimport these are working.
Willy
Edited by Matrix10, 6 October 2017 - 12:08.
Posted 6 October 2017 - 12:39
I checked what you say and indeed there is an utf-8 problem in de denmark channels file.
Corrected it.
But you can keep on using your set-up with the rytec.channels.xml.xz file.
I am working on integrating the Nordic separate channels files into the general file. The Denmark file was already integrated, so it worked.
Willy
~~Rytec Team~~
Maxytec Multibox SE OpenPli (used as mediaplayer)
Mutant HD2400 OpenPli
Vu+ Duo OpenPli (backup)
Synology NAS
Sat: 13E, 19.2E, 23.5E and 28.2E
*Pli/Rytec EPG POWERED*
Posted 6 October 2017 - 16:53
I have now tested the new file in CrossEPG for source Denmark XMLTV xz format in my Solo2. It is working good, 7 day EPG. . Got it from Matrix10 i BH EPG forum.
Norway an Sweden still working also, all on 0,8 W.
UK satellite 28.2 E is also working good, but parsing and possibly downloading several smaller files takes several more minutes than with older epg format file. But i works
However news channels on 28,2 UK have no EPG in the UK satellite source file, I imagine you are working on it
Had to delete CrossEPG database files in /media/hdd/crossepg so it builds the database from scratch before it will work. (Must do after first update to BH 3.0.4 also)
Big Thanks to you Willy for giving us the best EPG service, and to you Matrix10 for helping out pinning out the fault.
Erik
Posted 8 October 2017 - 16:06
Hello doglover.
I just can´t get it working.
I have now tried CrossEPG in BH and also XMLTVimport/EPGimport in OpenPLI V6
Still no EPG.
Im wondering, are all the channel id´s from the old format put into the new format?
Is the problem here, that the channels im using are not added in the new format?
Could you check a few of them like:
DR 1 1:0:19:65:88E:FE00:FFFF0000:0:0:0
TV2 Zulu 1:0:19:1A4:7F8:FE00:FFFF0000:0:0:0
Kanal 5: 1:0:19:46A:7D0:FE00:FFFF0000:0:0:0
Best regards
erojohn
Posted 8 October 2017 - 16:12
These are included.
It should not be the problem the service ref list (channels list) is not changed.
XMLTVimport/EPGimport in OpenPLI V6.0 RC
Should work like a charm.
Could you post the epgimport/log from XMLTVimport/EPGimport pls.
Willy
~~Rytec Team~~
Maxytec Multibox SE OpenPli (used as mediaplayer)
Mutant HD2400 OpenPli
Vu+ Duo OpenPli (backup)
Synology NAS
Sat: 13E, 19.2E, 23.5E and 28.2E
*Pli/Rytec EPG POWERED*
Posted 8 October 2017 - 16:36
open XMLTVimport/EPGimport
If you have a finished import you can request the log. Otherwise do first a manual import.
Press the menu button.
Request the log.
When you see the log. Save the log
It can be found then in /tmp/ on your receiver.
Willy
~~Rytec Team~~
Maxytec Multibox SE OpenPli (used as mediaplayer)
Mutant HD2400 OpenPli
Vu+ Duo OpenPli (backup)
Synology NAS
Sat: 13E, 19.2E, 23.5E and 28.2E
*Pli/Rytec EPG POWERED*
Posted 8 October 2017 - 16:38
Thanks.
Looks like alot of errors:
0 members, 1 guests, 0 anonymous users