2740 replies to this topic

[engineerkhan15]

 

thanks but no boot for my ki pro stock on mecool logo

 

Strange, I tested same image on my K1 Pro and it is booting well but DVB-S does not find any channel.

[babsy98]

amlogic from dream   http://dreambox.de/b...7799#post197799

[thmls]

Here are the test images.

K1 Pro:
http://www.mediafire...sdcard.zip/file

K2 Pro (S905):
http://www.mediafire...sdcard.zip/file

K1 Plus:
http://www.mediafire...sdcard.zip/file


should we transfer the dtb.img file?

The dtb file is included in the kernel.itb file just insert the card and use the toothpick method to load it

thanks but no boot for my ki pro stock on mecool logo

Try press reset button

I try
No luck

Στάλθηκε από το SM-A310F μου χρησιμοποιώντας Tapatalk

[starz]

It's strange but when we were using linkdroid for compiling,it wasn't booting with the latest gith source files,too.I was using my edited files for booting(which edited from gxbb_p201.dts and edited mesongxbb.dtsi form wetek-amlogic file) and working remote.

 

my files

 files.zip   28.26KB   11 downloads

[thmls]

Here are the test images.

K1 Pro:
http://www.mediafire...sdcard.zip/file

K2 Pro (S905):
http://www.mediafire...sdcard.zip/file

K1 Plus:
http://www.mediafire...sdcard.zip/file


should we transfer the dtb.img file?

The dtb file is included in the kernel.itb file just insert the card and use the toothpick method to load it

thanks but no boot for my ki pro stock on mecool logo

Try press reset button

I try
No luck

Στάλθηκε από το SM-A310F μου χρησιμοποιώντας Tapatalk

I press recovery button only 2 second and finally boot ki pro
After reboot stock on mecool logo . The same problem with previous version

Στάλθηκε από το SM-T320 μου χρησιμοποιώντας Tapatalk

[Guardian]

Need to find new sdcard this one is ruined.

So thats a pause for me, just ordered 10 but it will be a week.

Verstuurd vanaf mijn SM-G390F met Tapatalk

[thmls]

the sd card may fail.


i have install openatv alien5 and i replace kernel.itb with kernel.itb openpli.
boot is ok after replace the folder 3.14.29 with openpli but tuner settings is empty

Στάλθηκε από το SM-T320 μου χρησιμοποιώντας Tapatalk

[thmls]

Need to find new sdcard this one is ruined.

So thats a pause for me, just ordered 10 but it will be a week.

Verstuurd vanaf mijn SM-G390F met Tapatalk

My sd is fine openatv start up normaly

Edited by thmls, 28 July 2018 - 19:23.

[moham96]

Such problems would be hard to track down without a log, since we already have some people successfully booting on the same device.

Try getting a Uart cable which would make the life a lot easier and would probaby reveal the problem in seconds, and they are very cheap these days(around 5-10$)

 

[Guardian]

Maybe troubles are in firmware on internal, I have the Malaysk android firmware installed.

Verstuurd vanaf mijn SM-G390F met Tapatalk

[engineerkhan15]

If it boots directly into android even after using pin method for enigma2 written sd card, then you need to re-install the android. But if it blinks after mecool logo and then goes blank then there may be problem with the sd card or the image burnt.

[algdu83]

For me Is boot with gxl_p230_k1_pro.dtb

https://kszaq.libree...p230_k1_pro.dtb

remot ok

scan and tuner ok without find channels

I have test with my favoris but dvb not work

iptv not working

Edited by algdu83, 29 July 2018 - 08:53.

[sauna]

if it flashes after the mecool logo and then goes out.I think this is some kind of problem with kernel.itb.if kernel.itb is replaced from the old version,then everything starts.

[moham96]

if it flashes after the mecool logo and then goes out.I think this is some kind of problem with kernel.itb.if kernel.itb is replaced from the old version,then everything starts.

What old version ?

[thmls]

If it boots directly into android even after using pin method for enigma2 written sd card, then you need to re-install the android. But if it blinks after mecool logo and then goes blank then there may be problem with the sd card or the image burnt.

(1) i have install on 2 sd card openpli image and no boot

(2) openatv boot normally

(3) if replace kernel.itb with openatv kernel.itb openpli image boot normally
Something missing on kernel? I don't know I am at last android firmware 3/2018

[sauna]

Well, for example, with # 904195 a message from 

Persian Prince

.I tried kernel.itb from these images.

[Guardian]

Same problem overhere, SD card is fine, somethings wrong with the image.

Verstuurd vanaf mijn SM-G390F met Tapatalk

[Persian Prince]

Forgot to mention: I did add wetekhub

 

Test it yourself

[sauna]

got log k1plus through uart.

 

https://yadi.sk/d/9r0AVxrW3ZgZwr

[moham96]

got log k1plus through uart.

 

https://yadi.sk/d/9r0AVxrW3ZgZwr

Thank you that made everything alot clearer  

 

I see the problem is here:

mount: mounting /dev/mmcblk1p2 on /mnt failed: No such file or directory

It probably can't find /dev/mmcblk1p2 because it might enumerated the device as /dev/mmcblk0p2 , I sometimes encounter this issue because I use a boot manager for my k2pro , so when I boot some distros the external sdcard is named /dev/mmblk1 and other distros is/dev/mmcblk0 .

this can probably be fixed in the dts or udev rule but for now I want to make sure that this is the problem so do the following: when the boot fails at this stage execute this in the terminal

blkid

and post the result

I will work on a fix now