2740 replies to this topic

[sauna]

Here.BLKID wrote after a load failure in the same terminal.did i have to do it?

 

https://yadi.sk/d/JenQ65tM3ZgjtP

[moham96]

Here.BLKID wrote after a load failure in the same terminal.did i have to do it?

 

https://yadi.sk/d/JenQ65tM3ZgjtP

Don't use capital letters, unix world is case-sensetive

so execute

blkid

in all small letters and post the result, also you don't have to upload a zip file of the log each time, use something like pastebin.com

[moham96]

For me Is boot with gxl_p230_k1_pro.dtb

https://kszaq.libree...p230_k1_pro.dtb

remot ok

scan and tuner ok without find channels

I have test with my favoris but dvb not work

iptv not working

I'm curious, How did you use that dtb file ? did you decompile and then recompile the kernel.itb? or you just passed it to the kernel though the u-boot bootloader ?

[sauna]

So?

 

blkid

/dev/mmcblk0p2: LABEL="ROOTFS" UUID="6a89a537-1ed7-4598-a826-8056cbe1fdec" TYPE="ext4"

/dev/mmcblk0p1: LABEL="BOOT" UUID="A412-61F8" TYPE="vfat"

/ # [6n

[moham96]

 

So?

 

blkid

/dev/mmcblk0p2: LABEL="ROOTFS" UUID="6a89a537-1ed7-4598-a826-8056cbe1fdec" TYPE="ext4"

/dev/mmcblk0p1: LABEL="BOOT" UUID="A412-61F8" TYPE="vfat"

/ # [6n

 

Yes as I suspected the device is being enumerated as mmcblk0 instead of mmcblk1, and the internal emmc is not being detected at all.

[algdu83]

 

For me Is boot with gxl_p230_k1_pro.dtb

https://kszaq.libree...p230_k1_pro.dtb

remot ok

scan and tuner ok without find channels

I have test with my favoris but dvb not work

iptv not working

I'm curious, How did you use that dtb file ? did you decompile and then recompile the kernel.itb? or you just passed it to the kernel though the u-boot bootloader ?

 

No, Juste add it in racine of usb After burning img

same of libreelec

Edited by algdu83, 29 July 2018 - 16:08.

[moham96]

 

 

For me Is boot with gxl_p230_k1_pro.dtb

https://kszaq.libree...p230_k1_pro.dtb

remot ok

scan and tuner ok without find channels

I have test with my favoris but dvb not work

iptv not working

I'm curious, How did you use that dtb file ? did you decompile and then recompile the kernel.itb? or you just passed it to the kernel though the u-boot bootloader ?

 

No, Juste add it in racine of usb After burning img

same of libreelec

 

So you just placed dtb.img in the same place as kernel.itb?!

strange since the openpli bootloader script doesn't load any dtb file and it uses the dtb file included in the kernel.itb 

[algdu83]

 

 

 

strange since the openpli bootloader script doesn't load any dtb file and it uses the dtb file included in the kernel.itb 

 

I have to add it if no do not boot

not change name

i use gxl_P230....

Edited by algdu83, 29 July 2018 - 17:05.

[moham96]

I pushed a fix for the repo, update and build the image.

I also set the framebuffer to be initialized early so we can get error messages without the need of Uart.

[dsmi]

I try to build spark7162 to verify that it now works with my fulan/amiko dvbt and run into build failure:

 

Build Configuration:
BB_VERSION        = "1.34.0"
BUILD_SYS         = "i686-linux"
NATIVELSBSTRING   = "linuxmint-18.2"
TARGET_SYS        = "sh4-oe-linux"
MACHINE           = "spark7162"
DISTRO            = "openpli"
DISTRO_VERSION    = "homebuild"
TUNE_FEATURES     = "sh4"

--%<--

NOTE: Running task 2785 of 6067 (/media/ubuntu/b6236065-6145-472b-99ba-a50420f28231/openpli-oe-core/meta-openpli/recipes-multimedia/libdreamdvd/libdreamdvd_1.0.bb:do_compile)
NOTE: Running task 2836 of 6067 (/media/ubuntu/b6236065-6145-472b-99ba-a50420f28231/openpli-oe-core/meta-openpli/recipes-multimedia/libdvbsi++/libdvbsi++_0.3.8.bb:do_patch)
NOTE: recipe libdreamdvd-1.0+gitAUTOINC+02a0e7cb0c-r3: task do_compile: Started
NOTE: recipe libdvbsi++-0.3.8-r0: task do_patch: Started
NOTE: recipe libdvbsi++-0.3.8-r0: task do_patch: Succeeded
NOTE: Running task 2837 of 6067 (/media/ubuntu/b6236065-6145-472b-99ba-a50420f28231/openpli-oe-core/meta-openpli/recipes-multimedia/libdvbsi++/libdvbsi++_0.3.8.bb:do_populate_lic)
NOTE: recipe libdvbsi++-0.3.8-r0: task do_populate_lic: Started
Log data follows:
| DEBUG: SITE files ['endian-little', 'bit-32', 'sh-common', 'common-linux', 'common-glibc', 'sh4-linux', 'common']
| DEBUG: Executing shell function do_compile
| NOTE: make -j 2
| ERROR: oe_runmake failed
| make  all-am
| make[1]: Entering directory '/media/ubuntu/b6236065-6145-472b-99ba-a50420f28231/openpli-oe-core/build/tmp/work/sh4-oe-linux/libdreamdvd/1.0+gitAUTOINC+02a0e7cb0c-r3/build'
| ./sh4-oe-linux-libtool  --tag=CC   --mode=compile sh4-oe-linux-gcc  -ml -m4 --sysroot=/media/ubuntu/b6236065-6145-472b-99ba-a50420f28231/openpli-oe-core/build/tmp/work/sh4-oe-linux/libdreamdvd/1.0+gitAUTOINC+02a0e7cb0c-r3/recipe-sysroot -DHAVE_CONFIG_H -I. -I../git     -O2 -pipe -g -feliminate-unused-debug-types -fdebug-prefix-map=/media/ubuntu/b6236065-6145-472b-99ba-a50420f28231/openpli-oe-core/build/tmp/work/sh4-oe-linux/libdreamdvd/1.0+gitAUTOINC+02a0e7cb0c-r3=/usr/src/debug/libdreamdvd/1.0+gitAUTOINC+02a0e7cb0c-r3 -fdebug-prefix-map=/media/ubuntu/b6236065-6145-472b-99ba-a50420f28231/openpli-oe-core/build/tmp/work/sh4-oe-linux/libdreamdvd/1.0+gitAUTOINC+02a0e7cb0c-r3/recipe-sysroot-native= -fdebug-prefix-map=/media/ubuntu/b6236065-6145-472b-99ba-a50420f28231/openpli-oe-core/build/tmp/work/sh4-oe-linux/libdreamdvd/1.0+gitAUTOINC+02a0e7cb0c-r3/recipe-sysroot=  -c -o main.lo ../git/main.c
| sh4-oe-linux-libtool: compile:  sh4-oe-linux-gcc -ml -m4 --sysroot=/media/ubuntu/b6236065-6145-472b-99ba-a50420f28231/openpli-oe-core/build/tmp/work/sh4-oe-linux/libdreamdvd/1.0+gitAUTOINC+02a0e7cb0c-r3/recipe-sysroot -DHAVE_CONFIG_H -I. -I../git -O2 -pipe -g -feliminate-unused-debug-types -fdebug-prefix-map=/media/ubuntu/b6236065-6145-472b-99ba-a50420f28231/openpli-oe-core/build/tmp/work/sh4-oe-linux/libdreamdvd/1.0+gitAUTOINC+02a0e7cb0c-r3=/usr/src/debug/libdreamdvd/1.0+gitAUTOINC+02a0e7cb0c-r3 -fdebug-prefix-map=/media/ubuntu/b6236065-6145-472b-99ba-a50420f28231/openpli-oe-core/build/tmp/work/sh4-oe-linux/libdreamdvd/1.0+gitAUTOINC+02a0e7cb0c-r3/recipe-sysroot-native= -fdebug-prefix-map=/media/ubuntu/b6236065-6145-472b-99ba-a50420f28231/openpli-oe-core/build/tmp/work/sh4-oe-linux/libdreamdvd/1.0+gitAUTOINC+02a0e7cb0c-r3/recipe-sysroot= -c ../git/main.c  -fPIC -DPIC -o .libs/main.o
| ../git/main.c: In function 'ddvd_run':
| ../git/main.c:1170:8: error: 'for' loop initial declarations are only allowed in C99 or C11 mode
|         for (int z = 0; z < 2040; z++) {
|         ^
| ../git/main.c:1170:8: note: use option -std=c99, -std=gnu99, -std=c11 or -std=gnu11 to compile your code
| Makefile:493: recipe for target 'main.lo' failed
| make[1]: *** [main.lo] Error 1
| make[1]: Leaving directory '/media/ubuntu/b6236065-6145-472b-99ba-a50420f28231/openpli-oe-core/build/tmp/work/sh4-oe-linux/libdreamdvd/1.0+gitAUTOINC+02a0e7cb0c-r3/build'
| Makefile:371: recipe for target 'all' failed
| make: *** [all] Error 2
| WARNING: /media/ubuntu/b6236065-6145-472b-99ba-a50420f28231/openpli-oe-core/build/tmp/work/sh4-oe-linux/libdreamdvd/1.0+gitAUTOINC+02a0e7cb0c-r3/temp/run.do_compile.10095:1 exit 1 from 'exit 1'
| ERROR: Function failed: do_compile (log file is located at /media/ubuntu/b6236065-6145-472b-99ba-a50420f28231/openpli-oe-core/build/tmp/work/sh4-oe-linux/libdreamdvd/1.0+gitAUTOINC+02a0e7cb0c-r3/temp/log.do_compile.10095)
NOTE: recipe libdreamdvd-1.0+gitAUTOINC+02a0e7cb0c-r3: task do_compile: Failed
NOTE: Running task 2838 of 6067 (/media/ubuntu/b6236065-6145-472b-99ba-a50420f28231/openpli-oe-core/meta-openpli/recipes-multimedia/libdvbsi++/libdvbsi++_0.3.8.bb:do_configure)
NOTE: recipe libdvbsi++-0.3.8-r0: task do_populate_lic: Succeeded
NOTE: recipe libdvbsi++-0.3.8-r0: task do_configure: Started
NOTE: recipe libdvbsi++-0.3.8-r0: task do_configure: Succeeded
NOTE: Tasks Summary: Attempted 2838 tasks of which 2834 didn't need to be rerun and 1 failed.

Summary: 1 task failed:
  /media/ubuntu/b6236065-6145-472b-99ba-a50420f28231/openpli-oe-core/meta-openpli/recipes-multimedia/libdreamdvd/libdreamdvd_1.0.bb:do_compile
Summary: There were 2 ERROR messages shown, returning a non-zero exit code.

 

Any clue how to 'enforce' C99 or C11 mode while compiling?

A quick search learns that "you should compile the code using -std=c99 or -std=gnu99."

Where should I add this?
 

[starz]

I pushed a fix for the repo, update and build the image.

I also set the framebuffer to be initialized early so we can get error messages without the need of Uart.

I've tested it.led is blinking on box.then logo appears and goes blank screen.

remote doesn't work.

network works.

openwebif works but no 'current' screen activity.only spinners is on screen.

avl6862 is loaded.but I can't search anything beacuse of blank screen and non working current screen on webif.

 

then I re-burn it to sdcard again. it booted well then I changed remote.conf and it worked well too.but when I power-off the box to plug in my sat cable it didn't boot anymore.still on blank screen.

 

dmesg

[    3.616327@1] fb: init fbdev bpp is:32
[    3.620644@1] fb: Frame buffer memory assigned at
[    3.620645@1] fb:  0, phy: 0x000000003e700000, vir:0xffffff8001a00000, size=24576K
[    3.620645@1] 
[    3.620648@1] fb: ---------------clear fb0 memory ffffff8001a00000
[    3.634340@1] fb: osd[0] canvas.idx =0x40
[    3.634341@1] fb: osd[0] canvas.addr=0x3e700000
[    3.634343@1] fb: osd[0] canvas.width=7680
[    3.634344@1] fb: osd[0] canvas.height=3240
[    3.634346@1] fb: osd[0] frame.width=1920
[    3.634347@1] fb: osd[0] frame.height=1080
[    3.687981@0] Console: switching to colour frame buffer device 240x67
[    3.753314@0] fb: set osd0 reverse as NONE
[    3.767194@0] fb: osd probe OK
[    3.767486@0] ge2d: ge2d_init_module
[    3.768162@0] ge2d: ge2d_dev major:241
[    3.772391@0] ge2d: ge2d clock is 400 MHZ
[    3.775838@0] ge2d: ge2d: pdev=ffffffc0342b3400, irq=182, rstc=0xffffffc024d9d640, clk=ffffffc0341a7a00
[    3.785217@0] ge2d: mapped phy: 0xd0160000
[    3.789222@0] ge2d: ge2d start monitor
[    3.793155@0] ge2d: ge2d workqueue monitor start
[    3.797504@0] sysled: module init
[    3.800965@0] sysled: led_gpio = 135
[    3.804291@0] sysled: active_low = 0
[    3.808074@0] sysled: module probed ok
[    3.812185@0] codec:Amlogic A/V streaming port init
[    3.822544@0] codec:get gate demux control ok ffffffc0338fc500
[    3.822739@0] codec:get gate parser_top control ok ffffffc0338fcb40
[    3.828976@0] codec:get gate vpu_intr control ok ffffffc0338fc580
[    3.834983@0] codec:get gate vdec control ok ffffffc0338fc900
[    3.842845@0] codec:[tsync_pcr_init]init success.
[    3.845479@0] codec:amvideocap_probe,amvideocap
[    3.849842@0] codec:use cma buf.
[    3.860189@0] amvenc_avc_probe -- reserved memory config fail.
[    3.860382@0] amvenc_avc - cma memory pool size: 40 MB
[    3.865485@0] encode_wq_init.
[    3.868418@0] encode start monitor.
[    3.872064@0] encode workqueue monitor start.
[    3.876731@0] jpegenc module init
[    3.879928@0] codec:picdec_driver_probe called.
[    3.883933@0] picdec has 1 memory regions
[    3.887932@0] codec:picdec_driver_probe done.
[    3.895892@0] codec:vdec_request_irq ffffffc0016d0330, vsync
[    3.899264@1] codec:create_ge2d_work_queue video task ok
[    3.905021@1] rdma_register, rdma_table_addr ffffff8000472000 rdma_table_addr_phy 36050000 reg_buf ffffffc033ba8000
[    3.913464@1] rdma_register success, handle 2 table_size 32768
[    3.919269@1] video_rdma:rdma_init video rdma handle = 2.
[    3.924554@1] codec:register clk_set_setting cpu[31]
[    3.929738@1] vpu_init
[    3.931792@1] The chip is not support hevc encoder
[    3.936939@1] DI: di_module_init ok.
[    3.940114@1] DI: di_module_init: major 235
[    3.944511@1] DI: di_probe
[    3.947143@1] deinterlace has 1 memory regions
[    3.951339@1] DI: di reveser memory 0x3c900000, size 30MB.
[    3.951351@1] deinterlace deinterlace.26: assigned reserved memory node linux,di ok
[    3.958885@1] DI-di_probe: get flag_cma error.
[    3.963291@1] di_irq:78,timerc_irq:38
[    3.967054@1] rdma_register, rdma_table_addr ffffff8000439000 rdma_table_addr_phy 3604c000 reg_buf ffffffc0338a0000
[    3.977254@1] rdma_register success, handle 3 table_size 8192
[    3.982944@1] DI: di_probe allocate rdma channel 3.
[    3.987770@1] DI: DI hw version 2.
[    3.991144@1] 0x000000db:Y=db,U=0,V=0
[    3.994755@1] 0x000000dc:Y=dc,U=0,V=0
[    3.998377@1] 0x000000dd:Y=dd,U=0,V=0
[    4.002005@1] 0x000000de:Y=de,U=0,V=0
[    4.005622@1] 0x000000df:Y=df,U=0,V=0
[    4.009249@1] 0x000000e0:Y=e0,U=0,V=0
[    4.012868@1] 0x000000e1:Y=e1,U=0,V=0
[    4.016490@1] 0x000000e2:Y=e2,U=0,V=0
[    4.020117@1] 0x000000e3:Y=e3,U=0,V=0
[    4.023735@1] 0x000000f0:Y=f0,U=0,V=0
[    4.027359@1] 0x000000f1:Y=f1,U=0,V=0
[    4.030983@1] 0x000000f2:Y=f2,U=0,V=0
[    4.034602@1] 0x000000f3:Y=f3,U=0,V=0
[    4.038225@1] 0x000000f4:Y=f4,U=0,V=0
[    4.041851@1] 0x000000f5:Y=f5,U=0,V=0
[    4.045470@1] 0x000000f6:Y=f6,U=0,V=0
[    4.049097@1] 0x000000f7:Y=f7,U=0,V=0
[    4.052715@1] 0x000000f8:Y=f8,U=0,V=0
[    4.056337@1] 0x000000f9:Y=f9,U=0,V=0
[    4.059963@1] 0x000000fa:Y=fa,U=0,V=0
[    4.063582@1] 0x000000fb:Y=fb,U=0,V=0
[    4.067205@1] 0x000000fc:Y=fc,U=0,V=0
[    4.071341@1] efusekeynum: 4
[    4.073684@1] efusekeyname:             mac  offset:     0   size:     6
[    4.080099@1] efusekeyname:          mac_bt  offset:     6   size:     6
[    4.086442@1] efusekeyname:        mac_wifi  offset:    12   size:     6
[    4.092843@1] efusekeyname:            usid  offset:    18   size:    16
[    4.099628@1] efuse efuse.10: probe OK!
[    4.103434@1] key unify config unifykey-num is 14
[    4.107692@1] key unify fact unifykey-num is 14
[    4.112190@1] aml_unifykeys_probe:1280=============unifykey_devno:e900000
[    4.119287@1] 6unifykey: device unifykeys created ok
[    4.124096@1] 6aml_unifykeys_init done!
[    4.127754@1] PPMGRDRV: warn: ppmgr module init func called
[    4.133449@1] PPMGRDRV: err: ppmgr_driver_probe called
[    4.138362@1] ppmgr has 1 memory regions
[    4.142289@1] PPMGRDRV: info: init ppmgr memsource 3a900000->3c8fffff
[    4.148631@1] PPMGRDRV: info: ppmgr_dev major:232
[    4.153729@1] PPMGRDRV: info: ppmgr_probe done
[    4.158224@1] amlogic rfkill init
[    4.161365@1] audio_dsp: [dsp]register dsp to char divece(257)
[    4.168781@1] amaudio: amaudio: driver amaudio succuess!
[    4.172446@1] amlvid:err: amlvideo_init called
[    4.176226@1] amlvid:err: amlvideo_create_instance called
[    4.181796@1] amlvid:err: v4l2_dev.name=:amlvideo-000
[    4.187033@1] amlvideo-000: V4L2 device registered as video10
[    4.192648@1] vdin_drv_init: major 231
[    4.196615@1] vdin_drv_init: vdin driver init done
[    4.200945@1] tvafe_drv_init: major 230
[    4.205152@1] tvafe: tvafe_init.
[    4.208339@1] [RX]-hdmirx: hdmirx_init.
[    4.211747@1] ESM HLD: Initializing...
[    4.215383@1] ESM HLD: Registering device range 'esm_rx'...
[    4.220927@1] ESM HLD: Device range 'esm_rx' has been registered.
[    4.226939@1] ESM HLD: Creating class /sys/class/elliptic_rx...
[    4.232995@1] ESM HLD: The class /sys/class/elliptic_rx has been created.
[    4.239567@1] ESM HLD: Creating device 'esm_rx'...
[    4.244525@1] ESM HLD: Device 'esm_rx' has been created.
[    4.249574@1] ESM HLD: Done initializing the HLD driver.
[    4.254799@1] module init
[    4.257871@1] storage 2, boot 2
[    4.260534@1] get_storage_dev return 2
[    4.264201@1] nandphy: Nand PHY Ver:1.01.001.0006 (c) 2013 Amlogic Inc.
[    4.270898@1] nandphy: ######STS IRQ mode for nand driver
[    4.276144@1] nandphy: NAND device id: ad de 14 a7 42 4a ad de
[    4.281900@1] nandphy: detect NAND device: E revision 1Ynm NAND 8GiB H27UCG8T2E
[    4.341423@1] nandphy: clk_reg = 81000244
[    4.341441@1] nandphy: bus_c=6,bus_t=7,sys=4.0ns,T_REA=16,T_RHOH=15
[    4.345999@1] nandphy: new oob mode
[    4.352008@1] nandphy: get def value at blk:8,page:2048
[    4.355618@1] nandphy: NAND CKECK:arg nbbt:arg_valid=1,blk_addr=4,page_addr=0
[    4.366729@1] nandphy: NAND CKECK:arg ncnf:arg_valid=1,blk_addr=7,page_addr=0
[    4.395674@1] nandphy: NAND CKECK:arg phyp:arg_valid=1,blk_addr=11,page_addr=2
[    4.425245@1] nandphy: NAND CKECK:arg nkey:arg_valid=1,blk_addr=6,page_addr=54
[    4.462720@1] nandphy: NAND CKECK:arg ndtb:arg_valid=1,blk_addr=10,page_addr=72
[    4.501271@1] nandphy: NAND CKECK:arg nenv:arg_valid=1,blk_addr=9,page_addr=30
[    4.505278@1] nandphy: nfboot    : 
[    4.506289@1] nandphy: off:0x000000000000-0x000001000000 :partn=0:single_chip single_plane
[    4.514525@1] nandphy: nfcache   : 
[    4.517932@1] nandphy: off:0x00000d000000-0x000026000000 :partn=1:single_chip multi_plane
[    4.526052@1] nandphy: nfcode    : 
[    4.529503@1] nandphy: off:0x000033000000-0x000078000000 :partn=9:single_chip multi_plane
[    4.537594@1] nandphy: nfdata    : 
[    4.541059@1] nandphy: off:0x0000ab000000-0x000155000000 :partn=1:single_chip multi_plane
[    4.555765@3] saradc c1108680.saradc: initialized by BL30
[    4.555808@3] saradc c1108680.saradc: calibration start:
[    4.560872@3] saradc c1108680.saradc: nominal=0, value=0
[    4.566089@3] saradc c1108680.saradc: nominal=256, value=251
[    4.571720@3] saradc c1108680.saradc: nominal=512, value=509
[    4.577301@3] saradc c1108680.saradc: nominal=768, value=771
[    4.582949@3] saradc c1108680.saradc: nominal=1023, value=1023
[    4.588648@3] saradc c1108680.saradc: calibration end: coef=4032
[    4.594899@3] remote: Driver init
[    4.597982@3] remote: platform_data g_remote_ao_offset=580
[    4.603322@3] remote: platform_data irq =228
[    4.607563@3] remote: set drvdata completed
[    4.611772@3] remote: device_create_file completed 
[    4.616954@3] input: aml_keypad as /devices/meson-remote.12/input/input1
[    4.623740@3] remote: input_register_device completed 
[    4.628550@3] remote: set_remote_mode[78]
[    4.632485@3] remote: remote config major:224
[    4.637237@3] remote: physical address:0x33800000
[    4.642214@3] input: adc_keypad as /devices/adc_keypad.48/input/input2
[    4.648635@3] gpio-key gpio_keypad.47: gpio_key: 0 name(power) pin()
[    4.654305@3] gpio-key gpio_keypad.47: amlogic_gpio_name_map_num pin 0!::
[    4.661029@3] gpio-key gpio_keypad.47: gpio_key: 0 power(125)
[    4.666733@3] gpio-key gpio_keypad.47: start setup_timer
[    4.671973@3] gpio-key gpio_keypad.47: power key(116) registed.
[    4.678130@3] input: gpio_keypad as /devices/gpio_keypad.47/input/input3
[    4.684754@3] gpio-key gpio_keypad.47: gpio keypad register input device completed.
[    4.692084@3] input input3: gpio keypad major:223
[    4.700630@3] cpuinfo: probe done
[    4.704352@3] defendkey c8834500.defendkey: defendkey_devno:dc00000
[    4.707008@0] random: nonblocking pool is initialized
[    4.715507@3] defendkey c8834500.defendkey: defendkey: device defendkey created ok
[    4.722887@3] defendkey: driver init
[    4.727016@3] input: cec_input as /devices/virtual/input/input4
[    4.733621@3] cectx aocec: aml_cec_probe(): no hdmirx reg resource
[    4.738120@3] cectx aocec: aml_cec_probe(): no hhi reg resource
[    4.744156@3] cectx aocec: aml_cec_probe(): can't find hdmirx
[    4.750815@3] cec: wake up flag:0
[    4.760104@3] usbcore: registered new interface driver snd-usb-audio
[    4.761069@3] usbcore: registered new interface driver snd-ua101
[    4.767857@3] usbcore: registered new interface driver snd-usb-caiaq
[    4.773093@3] input input3: key 116 up
[    4.777030@3] usbcore: registered new interface driver snd-usb-6fire
[    4.783324@3] usbcore: registered new interface driver snd-usb-hiface
[    4.798151@1] aml-i2s-dai I2S.38: I2S Mic is in platform!
[    4.798661@1] aml_pcm_dai: pcm mode detection =1
[    4.804300@1] aml_snd_card: headphone detection disable=1
[    4.807826@1] aml_snd_card: no spk event delay time set
[    4.814644@1] aml_snd_m8_card aml_m8_snd.46: aml-pcm 0: playback preallocate_dma_buffer: area=ffffff8003201000, addr=0000000036200000, size=524288
[    4.826193@1] aml_snd_m8_card aml_m8_snd.46: aml-pcm 1: playback preallocate_dma_buffer: area=ffffff8003282000, addr=0000000036280000, size=524288
[    4.839145@1] aml_snd_m8_card aml_m8_snd.46: dummy <-> I2S.38 mapping ok
[    4.845874@1] aml_snd_m8_card aml_m8_snd.46: aml-pcm 0: playback preallocate_dma_buffer: area=ffffff8003303000, addr=0000000036300000, size=524288
[    4.858828@1] aml_snd_m8_card aml_m8_snd.46: aml-pcm 1: playback preallocate_dma_buffer: area=ffffff8003384000, addr=0000000036380000, size=524288
[    4.871766@1] aml_snd_m8_card aml_m8_snd.46: dit-hifi <-> SPDIF.39 mapping ok
[    4.878910@1] aml_pcm: enter aml_pcm_new dai->name: PCM.40 dai->id: 0
[    4.885281@1] aml_snd_m8_card aml_m8_snd.46: pcm2bt-pcm <-> PCM.40 mapping ok
[    4.900062@1] aml_snd_card: audio use jtag pinmux as i2s output, read val =ffffffff
[    4.912087@1] GACT probability NOT on
[    4.915126@1] Mirror/redirect action on
[    4.918943@1] u32 classifier
[    4.921760@1]     Actions configured
[    4.925357@1] ipip: IPv4 over IPv4 tunneling driver
[    4.930834@1] TCP: cubic registered
[    4.933581@1] Initializing XFRM netlink socket
[    4.940309@1] NET: Registered protocol family 10
[    4.943218@1] sit: IPv6 over IPv4 tunneling driver
[    4.948041@1] NET: Registered protocol family 17
[    4.952003@1] NET: Registered protocol family 15
[    4.956563@1] Bluetooth: RFCOMM TTY layer initialized
[    4.961493@1] Bluetooth: RFCOMM socket layer initialized
[    4.966708@1] Bluetooth: RFCOMM ver 1.11
[    4.970601@1] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    4.976012@1] Bluetooth: BNEP filters: protocol multicast
[    4.981379@1] Bluetooth: BNEP socket layer initialized
[    4.986449@1] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    4.992538@1] Bluetooth: HIDP socket layer initialized
[    4.997628@1] l2tp_core: L2TP core driver, V2.0
[    5.002082@1] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
[    5.007769@1] l2tp_netlink: L2TP netlink interface
[    5.012546@1] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
[    5.018553@1] l2tp_debugfs: L2TP debugfs support
[    5.023121@1] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
[    5.029701@1] NET: Registered protocol family 35
[    5.034274@1] Key type dns_resolver registered
[    5.039652@1] Registering SWP/SWPB emulation handler
[    5.044285@1] regulator-dummy: disabling
[    5.049165@1] aml_vrtc rtc.30: setting system clock to 2015-01-01 00:00:11 UTC (1420070411)
[    5.056657@1] cpufreq-scpi cpufreq-meson.7: enter  cpufreq
[    5.061224@1] cpufreq-scpi cpufreq-meson.7: probe  cpufreq okay
[    5.068485@0] hdmirx_ext: [hdmiin_drv_init] ver: Jul042016.1
[    5.073054@0] gxbb_pm: enter meson_pm_probe!
[    5.076891@0] gxbb_pm: meson_pm_probe done
[    5.081817@1] cpucore_cooling_register, max_cpu_core_num:4
[    5.101957@0] aml_istbt_dev_ready NULL
[    5.102006@0] ALSA device list:
[    5.103188@0]   #0: Loopback 1
[    5.106204@0]   #1: AML-M8AUDIO
[    5.109725@0] meson_uart c81004c0.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200
[    5.113084@0] Freeing unused kernel memory: 1220K (ffffffc001de7000 - ffffffc001f18000)
[    5.135489@3] vout_serve: vmode set to 1080p50hz
[    5.135489@3] 
[    5.136126@3] vout_serve: disable HDMI PHY as soon as possible
[    5.141982@3] fb: current vmode=1080p50hz, cmd: 0x50000
[    5.147066@3] tv_vout: tv_set_current_vmode[919]fps_target_mode=18
[    5.153195@3] tv_vout: mode is 18,sync_duration_den=1,sync_duration_num=50
[    5.160055@3] tv_vout: TV mode 1080p50hz selected.
[    5.164746@3] 
[    5.164746@3] vdac_enable: on:0,module_sel:8
[    5.170620@3] 
[    5.170620@3] vdac_enable: on:0,module_sel:8
[    5.176478@3] tv_vout: new mode =1080p50hz set ok
[    5.181160@3] vout_serve: vinfo mode is: 1080p50hz
[    5.185876@3] vout_serve: new mode 1080p50hz
[    5.185876@3]  set ok
[    5.192399@3] hdmitx: video: get current mode: 1080p50hz
[    5.197605@3] hdmitx: update rx hdr info 0
[    5.201669@3] hdmitx: update physcial size: 640 360
[    5.206500@3] hdmitx: system: [set_disp_mode_auto] ALREADY init VIC = 31
[    5.213144@3] fb: current vmode=1080p50hz, cmd: 0x10000
[    5.229516@1] fb: osd[0] canvas.idx =0x40
[    5.229519@1] fb: osd[0] canvas.addr=0x3e700000
[    5.229521@1] fb: osd[0] canvas.width=5760
[    5.229523@1] fb: osd[0] canvas.height=2160
[    5.229525@1] fb: osd[0] frame.width=1920
[    5.229527@1] fb: osd[0] frame.height=1080
[    5.300181@3] vout_serve: vmode set to 1080p50hz
[    5.300181@3] 
[    5.305996@3] vout_serve: don't set the same mode as current
[    5.347348@0] fb: osd[0] enable: 1 (hdmi.sh)
[    5.367289@0] fb: osd[1] enable: 0 (hdmi.sh)
[    5.390024@1] vfm_map_store:rm default
[    5.390024@1] 
[    5.395292@1] vfm_map_store:add default decoder ppmgr deinterlace amvideo
[    5.395292@1] 
[    5.407825@0] fb: afbc: 1
[    5.599055@1] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[    5.914949@1] meson_uart c81004c0.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200
[    5.923336@1] meson_uart c81004c0.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200
[    5.954852@2] meson_uart c81004c0.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200
[    5.979229@2] meson_uart c81004c0.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200
[    5.999176@2] meson_uart c81004c0.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200
[    6.030778@1] meson_uart c81004c0.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200
[    6.176011@1] vout_serve: vmode set to 1080p50hz
[    6.176011@1] 
[    6.176645@1] vout_serve: don't set the same mode as current
[    6.257511@1] vout_serve: vmode set to 1080p50hz
[    6.257511@1] 
[    6.258127@1] vout_serve: don't set the same mode as current
[    6.287285@0] fb: osd[0] enable: 1 (S03amlsetfb)
[    6.307245@0] fb: osd[1] enable: 0 (S03amlsetfb)
[    6.337138@2] remotecfg[2713]: unhandled level 2 translation fault (11) at 0x00000000, esr 0x92000006
[    6.346237@2] pgd = ffffffc023513000
[    6.349778@2] [00000000] *pgd=0000000023570003, *pmd=0000000000000000
[    6.356139@2] 
[    6.357787@2] CPU: 2 PID: 2713 Comm: remotecfg Not tainted 3.14.29 #1
[    6.364203@2] task: ffffffc033897000 ti: ffffffc025a88000 task.ti: ffffffc025a88000
[    6.371759@2] PC is at 0x7fb4a704a8
[    6.375198@2] LR is at 0x4014bc
[    6.378304@2] pc : [<0000007fb4a704a8>] lr : [<00000000004014bc>] pstate: 80000000
[    6.385820@2] sp : 0000007fe1397b80
[    6.389261@2] x29: 0000007fe1397b80 x28: 000000000000003b 
[    6.394691@2] x27: 0000007fe1397c70 x26: 0000000000000000 
[    6.400123@2] x25: 0000000000000000 x24: 0000000000000000 
[    6.405556@2] x23: 0000000000000000 x22: 0000000000000000 
[    6.410990@2] x21: 0000000000401c70 x20: 0000000000000000 
[    6.416424@2] x19: 0000000000000002 x18: 0000000000000000 
[    6.421857@2] x17: 0000007fb4a6ff88 x16: 0000000000413008 
[    6.427291@2] x15: 0000000000000001 x14: 0000000000000018 
[    6.432725@2] x13: 0000000000000000 x12: 000000000000000f 
[    6.438159@2] x11: 7f7f7f7f7f7f7f7f x10: feff35331f1f3433 
[    6.443592@2] x9 : 7f7fffffffffffff x8 : 0101010101010101 
[    6.449026@2] x7 : 0fffffffffffffff x6 : fefefefefefefeff 
[    6.454460@2] x5 : 0000007fb4bac750 x4 : 0000007fb4b7f2b0 
[    6.459894@2] x3 : 0000000000000000 x2 : 0000000000000000 
[    6.465327@2] x1 : 0000000000000000 x0 : 0000000000000000 
[    6.470761@2] 
[    6.742497@1] DVB: aml_dvb_probe: probe amlogic dvb driver
[    6.742542@1] DVB: aml_dvb_probe: dmx rst ctl = ffffffc034375980
[    6.748314@1] DVB: aml_dvb_probe: asyncfifo rst ctl = ffffffc034375a00
[    6.754841@1] DVB: aml_dvb_probe: ahbarb0 rst ctl = ffffffc034375d80
[    6.761108@1] DVB: aml_dvb_probe: uparsertop rst ctl = ffffffc033abde00
[    6.767693@1] DVB: registering new adapter (amlogic-dvb)
[    6.772903@1] DVB: aml_dvb_probe: Registered adpter: amlogic-dvb
[    6.783356@1] DMX: async fifo 0 buf size 524288, flush size 262144
[    6.785005@1] DMX: async fifo 1 buf size 524288, flush size 262144
[    6.806887@1] DVB FE: Init AVL6862 frontend 0
[    7.650617@1] i2c i2c-1: avl6862: found AVL6862 family_id=0x68624955
[    7.651341@1] i2c i2c-1: Load avl6862 firmware patch for DVB-S/S2 size=44000
[    9.459901@1] i2c i2c-1: avl6862 patch ver 2.0 build 20621
[    9.573002@1] i2c i2c-1: r848a: Rafael R848 successfully attached!
[    9.573536@1] DVB FE: AVL6862 and R848 attached!
[    9.578114@1] amlogic-dvb dvb.50: DVB: registering adapter 0 frontend 0 (Availink avl6862)...
[    9.586979@1] DVB FE: Frontend AVL6862 registred!
[    9.674501@1] mali-utgard d00c0000.mali: set min pp to default 1
[    9.674863@1] mali-utgard d00c0000.mali: set min clk default to 0
[    9.681144@1] mali-utgard d00c0000.mali: max clk set 5
[    9.686023@1] mali-utgard d00c0000.mali: turbo clk set to 6
[    9.694218@1] gpu cooling register okay with err=0
[    9.696598@1] gpu core cooling register okay with err=0
[    9.702072@1] Mali: Mali device driver loaded
[   10.132961@1] EXT4-fs (mmcblk0p2): re-mounted. Opts: data=ordered
[   10.403715@2] Console: switching to colour dummy device 80x25
[   10.560134@0] codec:vdec_create instance ffffff800150b000, total 1
[   10.564973@0] codec:no drmmode
[   10.568020@0] codec:Video stbuf alloced at 0000000036800000, size = 10485760
[   10.575003@0] codec:vdec_init, dev_name:amvdec_mpeg12, vdec_type=VDEC_TYPE_SINGLE
[   10.582390@0] codec:vdec_init set vfm decoder ffffff800150b000
[   10.588128@0] codec:vdec_dev_reg.mem[0x0 -- 0x0]
[   10.592718@0] codec:vdec base memory alloced [0000000037200000 -- 00000000391fffff]
[   10.600935@1] codec:vdec_request_irq ffffffc001693f48, vmpeg12-irq
[   10.606415@1] DI: di_receiver_event_fun: vframe provider reg
[   10.606644@1] codec:vdec_init, vf_provider_name = 
[   10.611697@1] codec:video first pts = 0
[   10.614938@1] codec:vdec_request_irq ffffffc00168a1c8, parser
[   10.839165@1] codec:video_receiver_event_fun: sent uevent FRAME_RATE_END_HINT
[   10.840750@2] PPMGRVPP: info: cma free addr is 3a900000 , size is  2000000
[   10.847498@1] DI: di_receiver_event_fun , is_bypass() 1 trick_mode 0 bypass_all 0
[   10.847506@1] di_receiver_event_fun: vf_notify_receiver unreg
[   10.853234@1] DI: di_unreg_process unreg start 1.
[   10.853248@1] codec:video first pts = 0
[   10.856956@1] DI: di_unreg_process vf unreg cost 0 ms.
[   10.856960@1] DI: di_unreg_process unreg stop 0.
[   11.420052@0] meson_uart c81004c0.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200
[   11.439355@0] meson_uart c81004c0.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200
[   11.459194@1] meson_uart c81004c0.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200
[   11.479662@2] meson_uart c81004c0.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200
[   16.619048@3] libphy: stmmac-0:00 - Link is Up - 100/Full
[   23.049702@2] meson_uart c81004c0.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200
[   23.175852@1] codec:vdec_create instance ffffff8001554000, total 1
[   23.181034@1] codec:no drmmode
[   23.183844@1] codec:Video stbuf alloced at 0000000036800000, size = 10485760
[   23.190735@1] codec:vdec_init, dev_name:amvdec_mpeg12, vdec_type=VDEC_TYPE_SINGLE
[   23.198086@1] codec:vdec_init set vfm decoder ffffff8001554000
[   23.203947@1] codec:vdec_dev_reg.mem[0x37200000 -- 0x391fffff]
[   23.210218@0] codec:vdec_request_irq ffffffc001693f48, vmpeg12-irq
[   23.215783@0] DI: di_receiver_event_fun: vframe provider reg
[   23.225963@0] codec:vdec_init, vf_provider_name = 
[   23.226363@0] codec:video first pts = 0
[   23.228987@0] codec:vdec_request_irq ffffffc00168a1c8, parser
[   23.439451@0] codec:video_receiver_event_fun: sent uevent FRAME_RATE_END_HINT
[   23.441117@0] DI: di_receiver_event_fun , is_bypass() 1 trick_mode 0 bypass_all 0
[   23.441131@0] di_receiver_event_fun: vf_notify_receiver unreg
[   23.446669@1] DI: di_unreg_process unreg start 1.
[   23.446694@1] codec:video first pts = 0
[   23.450528@1] DI: di_unreg_process vf unreg cost 10 ms.
[   23.450540@1] DI: di_unreg_process unreg stop 0.
[   28.525016@3] fb: command 0x23 not supported (enigma2)
[   28.549092@3] fb: command 0x40014621 not supported (enigma2)
[   28.549155@3] fb: osd[0] canvas.idx =0x40
[   28.549156@3] fb: osd[0] canvas.addr=0x3e700000
[   28.549158@3] fb: osd[0] canvas.width=7680
[   28.549159@3] fb: osd[0] canvas.height=2160
[   28.549161@3] fb: osd[0] frame.width=1920
[   28.549162@3] fb: osd[0] frame.height=1080
[   33.368919@3] input input3: key 116 down
[   33.518914@3] input input3: key 116 up
[   34.178884@3] input input3: key 116 down
[   34.988922@3] input input3: key 116 up
[   48.361402@2] grab[3227]: unhandled level 3 permission fault (11) at 0x7f865bf000, esr 0x9200004f
[   48.364618@2] pgd = ffffffc033897000
[   48.368151@2] [7f865bf000] *pgd=00000000236d4003, *pmd=0000000033aca003, *pte=002000003202bfd3
[   48.376687@2] 
[   48.378330@2] CPU: 2 PID: 3227 Comm: grab Tainted: G           O 3.14.29 #1
[   48.385239@2] task: ffffffc0236b6000 ti: ffffffc02596c000 task.ti: ffffffc02596c000
[   48.392872@2] PC is at 0x7f8689c0b0
[   48.396266@2] LR is at 0x4028b8
[   48.399379@2] pc : [<0000007f8689c0b0>] lr : [<00000000004028b8>] pstate: a0000000
[   48.406874@2] sp : 0000007fd692df80
[   48.410334@2] x29: 0000007fd692df90 x28: 0000000000418000 
[   48.415758@2] x27: 000000009efc1808 x26: 0000000000000000 
[   48.421191@2] x25: 0000007f857e6010 x24: 0000000000405300 
[   48.426625@2] x23: 0000000000000000 x22: 0000007f85fd0010 
[   48.432059@2] x21: 000000000000007f x20: 0000007f84ffc010 
[   48.437493@2] x19: 0000000000418000 x18: 0000000000030e1d 
[   48.442926@2] x17: 0000000000418000 x16: 0000007f8689bf90 
[   48.448360@2] x15: 0000000000000454 x14: 0000000000000000 
[   48.453794@2] x13: 0000000000000000 x12: 0000000000000000 
[   48.459228@2] x11: 0000000000000000 x10: 0000000000000000 
[   48.464661@2] x9 : 0000000000000000 x8 : 0000000000000000 
[   48.470095@2] x7 : 0000000000000000 x6 : 0000000000000000 
[   48.475529@2] x5 : 0000007f232cc3f8 x4 : 0000007f222f83f8 
[   48.480963@2] x3 : 0000007f865befd0 x2 : ffffffff9cd0d398 
[   48.486396@2] x1 : 0000007f855eb010 x0 : 0000007f85fd0010 
[   48.491831@2] 
[   67.689957@0] hdmitx: system: irq 80000004
[   67.690051@0] hdmitx: plugout
[   67.691382@0] hdmitx: system: unmux DDC for gpio read edid
[   67.696803@0] hdmitx: clear RX hdr info
[   67.708545@0] hdmitx: system: irq 80000002
[   67.718911@0] logo: mode chang
[   67.718941@0] fb: osd[1] enable: 0 (kworker/0:1)
[   67.727209@0] vout_serve: vmode set to 576cvbs
[   67.727247@0] vout_serve: disable HDMI PHY as soon as possible
[   67.732043@0] fb: current vmode=1080p50hz, cmd: 0x50000
[   67.736968@0] tv_vout: tv_set_current_vmode[919]fps_target_mode=7
[   67.743103@0] tv_vout: mode is 7,sync_duration_den=1,sync_duration_num=50
[   67.749835@0] tv_vout: TV mode 576cvbs selected.
[   67.754307@0] 
[   67.754307@0] vdac_enable: on:0,module_sel:8
[   67.760230@0] enc_clk_config: mode is: 7
[   67.764046@0] enc_clk_config: config HPLL
[   67.768102@0] enc_clk_config: config HPLL done
[   68.029035@2] hdmitx: plugin
[   68.090462@2] EDID Parser:
[   68.090518@2] hdmitx: get dtd0 vic: 16
[   68.091256@2] dump_dtd_info[1762]
[   68.094532@2] pixel_clock 8475
[   68.097550@2] h_active 1360
[   68.100320@2] h_blank 416
[   68.102898@2] v_active 768
[   68.105571@2] v_blank 30
[   68.108073@2] h_sync_offset 72
[   68.111104@2] h_sync 136
[   68.113595@2] v_sync_offset 3
[   68.116525@2] v_sync 5
[   68.118885@2] hdmitx: get dtd1 vic: 31
[   68.122564@2] hdmitx: edid: find IEEEOUT
[   68.126447@2] hdmitx: edid: check sum valid
[   68.130596@2] hdmitx: edid: check sum valid
[   68.778866@0] tv_vout: vdac open.0 = 0x1, 0x0
[   68.778910@0] 
[   68.778910@0] vdac_enable: on:1,module_sel:8
[   68.783468@0] tv_vout: new mode =576cvbs set ok
[   68.787940@0] vout_serve: vinfo mode is: 576cvbs
[   68.792567@0] vout_serve: new mode 576cvbs set ok
[   68.793230@2] hdmitx: update RX hdr info 0
[   68.793237@2] hdmitx: edid: check sum valid
[   68.793239@2] hdmitx: edid: check sum valid
[   68.793242@2] hdmitx: edid: blk0 raw data
[   68.793287@2] 00ffffffffffff00410c00000101010108170103804024780af9aba2554a9a25
[   68.793287@2] 0f474a21080081800101010101010101010101010101023a801871382d40582c
[   68.793287@2] 450080682100001e1b2150a051001e3048883500806821000018000000fc0050
[   68.793287@2] 48494c495053204654560a20000000fd00384c1e5311000a20202020202001c8
[   68.793287@2] 
[   68.793287@2] 
[   68.793289@2] hdmitx: edid: blk1 raw data
[   68.793336@2] 020326714e9f1020212214051304110215060126090703150750830100006703
[   68.793336@2] 0c002000b82d023a80d072382d40102c458080682100001e011d803e73382d40
[   68.793336@2] 7e2c458080682100001e011d80d0721c1620102c258080682100009e011d00bc
[   68.793336@2] 52d01e20b828554080682100001e00000000000000000000000000000000001c
[   68.793336@2] 
[   68.793336@2] 
[   68.793365@2] [RX]-receive ksv list len:1,depth:1,cas:0,dev:0
[   68.793375@2] hdmitx: video: get current mode: 576cvbs
[   68.793377@2] hdmitx: update rx hdr info 0
[   68.793379@2] hdmitx: update physcial size: 640 360
[   68.793381@2] hdmitx: video: 576cvbs not valid hdmi mode
[   68.793413@2] hdmtix: set audio
[   68.793423@2] hdmitx tx_aud_src = 0
[   68.793456@2] hdmitx: fs = 0, cd = 4, tmds_clk = 0
[   68.793458@2] hdmitx aud_n_para = 6144
[   68.793478@2] hdmitx set channel status
[   68.925153@0] hdmitx: edid: not find mapped vic
[   68.929521@0] hdmitx: video: get current mode: 576cvbs
[   68.934603@0] hdmitx: update rx hdr info 0
[   68.938617@0] hdmitx: update physcial size: 640 360
[   68.943493@0] hdmitx: video: 576cvbs not valid hdmi mode
[   68.948734@0] fb: current vmode=576cvbs, cmd: 0x10000
[   68.972536@0] logo: set vmode: 576cvbs
[   68.972560@0] hdmitx: edid: not find mapped vic
[   68.975138@0] hdmitx: video: get current mode: 576cvbs
[   68.980242@0] hdmitx: update rx hdr info 0
[   68.984276@0] hdmitx: update physcial size: 640 360
[   68.989115@0] hdmitx: video: 576cvbs not valid hdmi mode
[   68.994394@0] fb: current vmode=576cvbs, cmd: 0x10000
[   69.012531@0] logo: outputmode changed to 576cvbs, reset osd1 scaler
[   69.052531@0] fb: osd[1] enable: 1 (kworker/0:1)
[   69.072588@0] logo: finish
[   69.568888@0] logo: mode chang
[   69.568924@0] fb: osd[1] enable: 0 (kworker/0:1)
[   69.572552@0] vout_serve: vmode set to 1080p50hz
[   69.575652@0] vout_serve: disable HDMI PHY as soon as possible
[   69.581476@0] fb: current vmode=576cvbs, cmd: 0x50000
[   69.586414@0] tv_vout: tv_set_current_vmode[919]fps_target_mode=18
[   69.592572@0] tv_vout: mode is 18,sync_duration_den=1,sync_duration_num=50
[   69.599386@0] tv_vout: TV mode 1080p50hz selected.
[   69.604093@0] 
[   69.604093@0] vdac_enable: on:0,module_sel:8
[   69.609983@0] 
[   69.609983@0] vdac_enable: on:0,module_sel:8
[   69.615821@0] tv_vout: new mode =1080p50hz set ok
[   69.620486@0] vout_serve: vinfo mode is: 1080p50hz
[   69.625218@0] vout_serve: new mode 1080p50hz set ok
[   69.630087@0] hdmitx: video: get current mode: 1080p50hz
[   69.635311@0] hdmitx: update rx hdr info 0
[   69.639379@0] hdmitx: update physcial size: 640 360
[   69.644226@0] hdmitx: system: already init VIC = 0  Now VIC = 31
[   69.650155@0] hdmitx: rx no SCDC present indicator
[   69.656894@0] hdmitx: ddc rd8b error 0x54 0x01
[   69.661300@0] hdmitx: ddc rd8b error 0x54 0x01
[   69.663687@0] hdmirx version is 1.4 or below
[   69.667911@0] hdmitx div40: 0
[   69.698853@0] hdmitx: system: set mode VIC 31 (cd0,cs0,pm1,vd0,1)
[   69.699288@0] hdmitx: system: set pll
[   69.702910@0] hdmitx: system: param->VIC:31
[   69.707052@0] hdmitx: set clk: VIC = 31  cd = 4  frac_rate = 0
[   69.714846@0] hdmitx: ddc w1b error 0x54 0x20 0x00
[   69.719581@0] hdmitx: ddc w1b error 0x54 0x20 0x00
[   69.724323@0] hdmitx: ddc rd8b error 0x54 0x21
[   69.726734@0] hdmitx: 1920x1080p50hz doesn't have frac_rate
[   69.732251@0] config HPLL = 2970000
[   69.735703@0] HPLL: 0xc800023d
[   69.738705@0] config HPLL done
[   69.741737@0] set_hpll_od3_clk_div[437] div = 6
[   69.746213@0] j = 4  vid_clk_div = 1
[   69.749757@0] hdmitx: set enc for VIC: 31
[   69.753738@0] hdmitx_set_hw[4947] set VIC = 31
[   69.758293@0] hdmitx: system: irq 80000001
[   69.762192@0] Start = 0x10000100   End = 0x100001ff
[   69.767002@0] [0x10000104]: 0x00000001
[   69.770933@0] [0x10000180]: 0x000000ff
[   69.774423@0] [0x10000181]: 0x000000ff
[   69.778122@0] [0x10000182]: 0x00000003
[   69.781885@0] [0x10000183]: 0x00000007
[   69.785542@0] [0x10000184]: 0x0000003f
[   69.789349@0] [0x10000185]: 0x00000002
[   69.792959@0] [0x10000187]: 0x000000ff
[   69.796689@0] [0x10000188]: 0x00000003
[   69.930873@0] hdmitx: system: PHY Setting Done
[   69.934907@0] Sink is HDMI device
[   69.934971@0] 1080p50hz 50 1
[   69.935807@0] 1080p50hz 50 1
[   69.938650@0] hdmtix: set audio
[   69.941785@0] hdmitx tx_aud_src = 0
[   69.945232@0] hdmitx: fs = 0, cd = 4, tmds_clk = 148500
[   69.950398@0] hdmitx aud_n_para = 6144
[   69.954113@0] hdmitx set channel status
[   69.957943@0] fb: current vmode=1080p50hz, cmd: 0x10000
[   69.971924@0] logo: set vmode: 1080p50hz
[   69.971950@0] hdmitx: video: get current mode: 1080p50hz
[   69.975469@0] hdmitx: update rx hdr info 0
[   69.979535@0] hdmitx: update physcial size: 640 360
[   69.984362@0] hdmitx: system: [set_disp_mode_auto] ALREADY init VIC = 31
[   69.991009@0] fb: current vmode=1080p50hz, cmd: 0x10000
[   70.011921@0] logo: outputmode changed to 1080p50hz, reset osd1 scaler
[   70.051918@0] fb: osd[1] enable: 1 (kworker/0:1)
[   70.071913@2] logo: finish
[   79.351095@2] grab[3237]: unhandled level 3 permission fault (11) at 0x7f8ba02000, esr 0x9200004f
[   79.354476@2] pgd = ffffffc0235a9000
[   79.358008@2] [7f8ba02000] *pgd=00000000236ce003, *pmd=00000000236d5003, *pte=002000003202bfd3
[   79.366544@2] 
[   79.368186@2] CPU: 2 PID: 3237 Comm: grab Tainted: G           O 3.14.29 #1
[   79.375096@2] task: ffffffc02306f000 ti: ffffffc02591c000 task.ti: ffffffc02591c000
[   79.382726@2] PC is at 0x7f8bcdf0b0
[   79.386124@2] LR is at 0x4028b8
[   79.389251@2] pc : [<0000007f8bcdf0b0>] lr : [<00000000004028b8>] pstate: a0000000
[   79.396732@2] sp : 0000007fe865a6d0
[   79.400192@2] x29: 0000007fe865a6e0 x28: 0000000000418000 
[   79.405615@2] x27: 000000009efc1808 x26: 0000000000000000 
[   79.411049@2] x25: 0000007f8ac29010 x24: 0000000000405300 
[   79.416483@2] x23: 0000000000000000 x22: 0000007f8b413010 
[   79.421917@2] x21: 000000000000007f x20: 0000007f8a43f010 
[   79.427350@2] x19: 0000000000418000 x18: 0000000000030e1d 
[   79.432784@2] x17: 0000000000418000 x16: 0000007f8bcdef90 
[   79.438218@2] x15: 0000000000000454 x14: 0000000000000000 
[   79.443652@2] x13: 0000000000000000 x12: 0000000000000000 
[   79.449085@2] x11: 0000000000000000 x10: 0000000000000000 
[   79.454519@2] x9 : 0000000000000000 x8 : 0000000000000000 
[   79.459953@2] x7 : 0000000000000000 x6 : 0000000000000000 
[   79.465387@2] x5 : 0000007f2870f3f8 x4 : 0000007f2773b3f8 
[   79.470821@2] x3 : 0000007f8ba01fd0 x2 : ffffffff9cd0d398 
[   79.476254@2] x1 : 0000007f8aa2e010 x0 : 0000007f8b413010 
[   79.481687@2] 
[  110.351284@2] grab[3241]: unhandled level 3 permission fault (11) at 0x7f7ff5a000, esr 0x9200004f
[  110.354502@2] pgd = ffffffc02365d000
[  110.358035@2] [7f7ff5a000] *pgd=0000000024e77003, *pmd=0000000024f86003, *pte=002000003202bfd3
[  110.366571@2] 
[  110.368214@2] CPU: 2 PID: 3241 Comm: grab Tainted: G           O 3.14.29 #1
[  110.375212@2] task: ffffffc02306f000 ti: ffffffc0259dc000 task.ti: ffffffc0259dc000
[  110.382773@2] PC is at 0x7f802370b0
[  110.386150@2] LR is at 0x4028b8
[  110.389266@2] pc : [<0000007f802370b0>] lr : [<00000000004028b8>] pstate: a0000000
[  110.396758@2] sp : 0000007fed42b590
[  110.400219@2] x29: 0000007fed42b5a0 x28: 0000000000418000 
[  110.405642@2] x27: 000000009efc1808 x26: 0000000000000000 
[  110.411076@2] x25: 0000007f7f181010 x24: 0000000000405300 
[  110.416509@2] x23: 0000000000000000 x22: 0000007f7f96b010 
[  110.421943@2] x21: 000000000000007f x20: 0000007f7e997010 
[  110.427377@2] x19: 0000000000418000 x18: 0000000000030e1d 
[  110.432811@2] x17: 0000000000418000 x16: 0000007f80236f90 
[  110.438244@2] x15: 0000000000000454 x14: 0000000000000000 
[  110.443678@2] x13: 0000000000000000 x12: 0000000000000000 
[  110.449112@2] x11: 0000000000000000 x10: 0000000000000000 
[  110.454546@2] x9 : 0000000000000000 x8 : 0000000000000000 
[  110.459980@2] x7 : 0000000000000000 x6 : 0000000000000000 
[  110.465413@2] x5 : 0000007f1cc673f8 x4 : 0000007f1bc933f8 
[  110.470847@2] x3 : 0000007f7ff59fd0 x2 : ffffffff9cd0d398 
[  110.476281@2] x1 : 0000007f7ef86010 x0 : 0000007f7f96b010 
[  110.481714@2] 
[  141.345455@2] grab[3245]: unhandled level 3 permission fault (11) at 0x7f8de9b000, esr 0x9200004f
[  141.348673@2] pgd = ffffffc023616000
[  141.352550@2] [7f8de9b000] *pgd=0000000024544003, *pmd=0000000033aca003, *pte=002000003202bfd3
[  141.360743@2] 
[  141.362386@2] CPU: 2 PID: 3245 Comm: grab Tainted: G           O 3.14.29 #1
[  141.369345@2] task: ffffffc02306f000 ti: ffffffc02595c000 task.ti: ffffffc02595c000
[  141.376876@2] PC is at 0x7f8e1780b0
[  141.380331@2] LR is at 0x4028b8
[  141.383426@2] pc : [<0000007f8e1780b0>] lr : [<00000000004028b8>] pstate: a0000000
[  141.390938@2] sp : 0000007fea3560f0
[  141.394379@2] x29: 0000007fea356100 x28: 0000000000418000 
[  141.399813@2] x27: 000000009efc1808 x26: 0000000000000000 
[  141.405246@2] x25: 0000007f8d0c2010 x24: 0000000000405300 
[  141.410680@2] x23: 0000000000000000 x22: 0000007f8d8ac010 
[  141.416113@2] x21: 000000000000007f x20: 0000007f8c8d8010 
[  141.421547@2] x19: 0000000000418000 x18: 0000000000030e1d 
[  141.426981@2] x17: 0000000000418000 x16: 0000007f8e177f90 
[  141.432415@2] x15: 0000000000000454 x14: 0000000000000000 
[  141.437848@2] x13: 0000000000000000 x12: 0000000000000000 
[  141.443282@2] x11: 0000000000000000 x10: 0000000000000000 
[  141.448716@2] x9 : 0000000000000000 x8 : 0000000000000000 
[  141.454150@2] x7 : 0000000000000000 x6 : 0000000000000000 
[  141.459584@2] x5 : 0000007f2aba83f8 x4 : 0000007f29bd43f8 
[  141.465017@2] x3 : 0000007f8de9afd0 x2 : ffffffff9cd0d398 
[  141.470451@2] x1 : 0000007f8cec7010 x0 : 0000007f8d8ac010 
[  141.475884@2] 
[  172.352373@2] grab[3249]: unhandled level 3 permission fault (11) at 0x7f85a74000, esr 0x9200004f
[  172.355592@2] pgd = ffffffc023604000
[  172.359161@2] [7f85a74000] *pgd=00000000236bd003, *pmd=00000000236d3003, *pte=002000003202bfd3
[  172.367659@2] 
[  172.369311@2] CPU: 2 PID: 3249 Comm: grab Tainted: G           O 3.14.29 #1
[  172.376200@2] task: ffffffc02306f000 ti: ffffffc025898000 task.ti: ffffffc025898000
[  172.383813@2] PC is at 0x7f85d510b0
[  172.387239@2] LR is at 0x4028b8
[  172.390351@2] pc : [<0000007f85d510b0>] lr : [<00000000004028b8>] pstate: a0000000
[  172.397847@2] sp : 0000007fc2339ec0
[  172.401306@2] x29: 0000007fc2339ed0 x28: 0000000000418000 
[  172.406730@2] x27: 000000009efc1808 x26: 0000000000000000 
[  172.412164@2] x25: 0000007f84c9b010 x24: 0000000000405300 
[  172.417598@2] x23: 0000000000000000 x22: 0000007f85485010 
[  172.423032@2] x21: 000000000000007f x20: 0000007f844b1010 
[  172.428465@2] x19: 0000000000418000 x18: 0000000000030e1d 
[  172.433899@2] x17: 0000000000418000 x16: 0000007f85d50f90 
[  172.439334@2] x15: 0000000000000454 x14: 0000000000000000 
[  172.444766@2] x13: 0000000000000000 x12: 0000000000000000 
[  172.450200@2] x11: 0000000000000000 x10: 0000000000000000 
[  172.455634@2] x9 : 0000000000000000 x8 : 0000000000000000 
[  172.461068@2] x7 : 0000000000000000 x6 : 0000000000000000 
[  172.466502@2] x5 : 0000007f227813f8 x4 : 0000007f217ad3f8 
[  172.471935@2] x3 : 0000007f85a73fd0 x2 : ffffffff9cd0d398 
[  172.477369@2] x1 : 0000007f84aa0010 x0 : 0000007f85485010 
[  172.482802@2] 
[  203.350760@2] grab[3253]: unhandled level 3 permission fault (11) at 0x7f7cd2c000, esr 0x9200004f
[  203.353979@2] pgd = ffffffc0236be000
[  203.357512@2] [7f7cd2c000] *pgd=0000000023601003, *pmd=0000000024544003, *pte=002000003202bfd3
[  203.366047@2] 
[  203.367689@2] CPU: 2 PID: 3253 Comm: grab Tainted: G           O 3.14.29 #1
[  203.374598@2] task: ffffffc02306f000 ti: ffffffc025904000 task.ti: ffffffc025904000
[  203.382193@2] PC is at 0x7f7d0090b0
[  203.385627@2] LR is at 0x4028b8
[  203.388732@2] pc : [<0000007f7d0090b0>] lr : [<00000000004028b8>] pstate: a0000000
[  203.396285@2] sp : 0000007ff4878510
[  203.399702@2] x29: 0000007ff4878520 x28: 0000000000418000 
[  203.405118@2] x27: 000000009efc1808 x26: 0000000000000000 
[  203.410553@2] x25: 0000007f7bf53010 x24: 0000000000405300 
[  203.415986@2] x23: 0000000000000000 x22: 0000007f7c73d010 
[  203.421423@2] x21: 000000000000007f x20: 0000007f7b769010 
[  203.426853@2] x19: 0000000000418000 x18: 0000000000030e1d 
[  203.432287@2] x17: 0000000000418000 x16: 0000007f7d008f90 
[  203.437721@2] x15: 0000000000000454 x14: 0000000000000000 
[  203.443155@2] x13: 0000000000000000 x12: 0000000000000000 
[  203.448588@2] x11: 0000000000000000 x10: 0000000000000000 
[  203.454022@2] x9 : 0000000000000000 x8 : 0000000000000000 
[  203.459456@2] x7 : 0000000000000000 x6 : 0000000000000000 
[  203.464889@2] x5 : 0000007f19a393f8 x4 : 0000007f18a653f8 
[  203.470323@2] x3 : 0000007f7cd2bfd0 x2 : ffffffff9cd0d398 
[  203.475757@2] x1 : 0000007f7bd58010 x0 : 0000007f7c73d010 
[  203.481190@2] 
[  234.346084@2] grab[3257]: unhandled level 3 permission fault (11) at 0x7f8e052000, esr 0x9200004f
[  234.349341@2] pgd = ffffffc0236dc000
[  234.352839@2] [7f8e052000] *pgd=0000000023601003, *pmd=0000000024e77003, *pte=002000003202bfd3
[  234.361373@2] 
[  234.363015@2] CPU: 2 PID: 3257 Comm: grab Tainted: G           O 3.14.29 #1
[  234.369925@2] task: ffffffc02306f000 ti: ffffffc0258c0000 task.ti: ffffffc0258c0000
[  234.377513@2] PC is at 0x7f8e32f0b0
[  234.380968@2] LR is at 0x4028b8
[  234.384059@2] pc : [<0000007f8e32f0b0>] lr : [<00000000004028b8>] pstate: a0000000
[  234.391568@2] sp : 0000007ff34955b0
[  234.395011@2] x29: 0000007ff34955c0 x28: 0000000000418000 
[  234.400445@2] x27: 000000009efc1808 x26: 0000000000000000 
[  234.405878@2] x25: 0000007f8d279010 x24: 0000000000405300 
[  234.411311@2] x23: 0000000000000000 x22: 0000007f8da63010 
[  234.416745@2] x21: 000000000000007f x20: 0000007f8ca8f010 
[  234.422179@2] x19: 0000000000418000 x18: 0000000000030e1d 
[  234.427613@2] x17: 0000000000418000 x16: 0000007f8e32ef90 
[  234.433047@2] x15: 0000000000000454 x14: 0000000000000000 
[  234.438480@2] x13: 0000000000000000 x12: 0000000000000000 
[  234.443914@2] x11: 0000000000000000 x10: 0000000000000000 
[  234.449348@2] x9 : 0000000000000000 x8 : 0000000000000000 
[  234.454781@2] x7 : 0000000000000000 x6 : 0000000000000000 
[  234.460216@2] x5 : 0000007f2ad5f3f8 x4 : 0000007f29d8b3f8 
[  234.465649@2] x3 : 0000007f8e051fd0 x2 : ffffffff9cd0d398 
[  234.471083@2] x1 : 0000007f8d07e010 x0 : 0000007f8da63010 
[  234.476516@2] 
[  265.354384@2] grab[3261]: unhandled level 3 permission fault (11) at 0x7fade67000, esr 0x9200004f
[  265.357603@2] pgd = ffffffc02374c000
[  265.361174@2] [7fade67000] *pgd=00000000236d4003, *pmd=0000000024f85003, *pte=002000003202bfd3
[  265.369671@2] 
[  265.371314@2] CPU: 2 PID: 3261 Comm: grab Tainted: G           O 3.14.29 #1
[  265.378211@2] task: ffffffc02306f000 ti: ffffffc02584c000 task.ti: ffffffc02584c000
[  265.385862@2] PC is at 0x7fae1440b0
[  265.389258@2] LR is at 0x4028b8
[  265.392356@2] pc : [<0000007fae1440b0>] lr : [<00000000004028b8>] pstate: a0000000
[  265.399868@2] sp : 0000007fc1c8fbe0
[  265.403309@2] x29: 0000007fc1c8fbf0 x28: 0000000000418000 
[  265.408742@2] x27: 000000009efc1808 x26: 0000000000000000 
[  265.414176@2] x25: 0000007fad08e010 x24: 0000000000405300 
[  265.419610@2] x23: 0000000000000000 x22: 0000007fad878010 
[  265.425043@2] x21: 000000000000007f x20: 0000007fac8a4010 
[  265.430477@2] x19: 0000000000418000 x18: 0000000000030e1d 
[  265.435911@2] x17: 0000000000418000 x16: 0000007fae143f90 
[  265.441345@2] x15: 0000000000000454 x14: 0000000000000000 
[  265.446778@2] x13: 0000000000000000 x12: 0000000000000000 
[  265.452212@2] x11: 0000000000000000 x10: 0000000000000000 
[  265.457646@2] x9 : 0000000000000000 x8 : 0000000000000000 
[  265.463080@2] x7 : 0000000000000000 x6 : 0000000000000000 
[  265.468513@2] x5 : 0000007f4ab743f8 x4 : 0000007f49ba03f8 
[  265.473947@2] x3 : 0000007fade66fd0 x2 : ffffffff9cd0d398 
[  265.479381@2] x1 : 0000007face93010 x0 : 0000007fad878010 
[  265.484814@2] 
[  296.352955@2] grab[3265]: unhandled level 3 permission fault (11) at 0x7f86586000, esr 0x9200004f
[  296.356172@2] pgd = ffffffc0235a1000
[  296.359741@2] [7f86586000] *pgd=0000000024f9e003, *pmd=0000000023601003, *pte=002000003202bfd3
[  296.368240@2] 
[  296.369893@2] CPU: 2 PID: 3265 Comm: grab Tainted: G           O 3.14.29 #1
[  296.376780@2] task: ffffffc02306f000 ti: ffffffc025874000 task.ti: ffffffc025874000
[  296.384423@2] PC is at 0x7f868630b0
[  296.387820@2] LR is at 0x4028b8
[  296.390934@2] pc : [<0000007f868630b0>] lr : [<00000000004028b8>] pstate: a0000000
[  296.398427@2] sp : 0000007ff4679db0
[  296.401887@2] x29: 0000007ff4679dc0 x28: 0000000000418000 
[  296.407311@2] x27: 000000009efc1808 x26: 0000000000000000 
[  296.412745@2] x25: 0000007f857ad010 x24: 0000000000405300 
[  296.418178@2] x23: 0000000000000000 x22: 0000007f85f97010 
[  296.423612@2] x21: 000000000000007f x20: 0000007f84fc3010 
[  296.429046@2] x19: 0000000000418000 x18: 0000000000030e1d 
[  296.434480@2] x17: 0000000000418000 x16: 0000007f86862f90 
[  296.439914@2] x15: 0000000000000454 x14: 0000000000000000 
[  296.445347@2] x13: 0000000000000000 x12: 0000000000000000 
[  296.450781@2] x11: 0000000000000000 x10: 0000000000000000 
[  296.456215@2] x9 : 0000000000000000 x8 : 0000000000000000 
[  296.461649@2] x7 : 0000000000000000 x6 : 0000000000000000 
[  296.467082@2] x5 : 0000007f232933f8 x4 : 0000007f222bf3f8 
[  296.472516@2] x3 : 0000007f86585fd0 x2 : ffffffff9cd0d398 
[  296.477950@2] x1 : 0000007f855b2010 x0 : 0000007f85f97010 
[  296.483383@2] 
[  327.349368@2] grab[3269]: unhandled level 3 permission fault (11) at 0x7f7ae38000, esr 0x9200004f
[  327.352584@2] pgd = ffffffc023606000
[  327.356117@2] [7f7ae38000] *pgd=0000000024f9e003, *pmd=00000000236da003, *pte=002000003202bfd3
[  327.364653@2] 
[  327.366295@2] CPU: 2 PID: 3269 Comm: grab Tainted: G           O 3.14.29 #1
[  327.373204@2] task: ffffffc02306f000 ti: ffffffc025804000 task.ti: ffffffc025804000
[  327.380833@2] PC is at 0x7f7b1150b0
[  327.384233@2] LR is at 0x4028b8
[  327.387338@2] pc : [<0000007f7b1150b0>] lr : [<00000000004028b8>] pstate: a0000000
[  327.394850@2] sp : 0000007fd9af8630
[  327.398291@2] x29: 0000007fd9af8640 x28: 0000000000418000 
[  327.403724@2] x27: 000000009efc1808 x26: 0000000000000000 
[  327.409159@2] x25: 0000007f7a05f010 x24: 0000000000405300 
[  327.414591@2] x23: 0000000000000000 x22: 0000007f7a849010 
[  327.420026@2] x21: 000000000000007f x20: 0000007f79875010 
[  327.425459@2] x19: 0000000000418000 x18: 0000000000030e1d 
[  327.430893@2] x17: 0000000000418000 x16: 0000007f7b114f90 
[  327.436326@2] x15: 0000000000000454 x14: 0000000000000000 
[  327.441760@2] x13: 0000000000000000 x12: 0000000000000000 
[  327.447194@2] x11: 0000000000000000 x10: 0000000000000000 
[  327.452628@2] x9 : 0000000000000000 x8 : 0000000000000000 
[  327.458061@2] x7 : 0000000000000000 x6 : 0000000000000000 
[  327.463495@2] x5 : 0000007f17b453f8 x4 : 0000007f16b713f8 
[  327.468937@2] x3 : 0000007f7ae37fd0 x2 : ffffffff9cd0d398 
[  327.474363@2] x1 : 0000007f79e64010 x0 : 0000007f7a849010 
[  327.479797@2] 
[  358.351261@2] grab[3273]: unhandled level 3 permission fault (11) at 0x7f8b5bf000, esr 0x9200004f
[  358.354474@2] pgd = ffffffc024e78000
[  358.358007@2] [7f8b5bf000] *pgd=0000000024f86003, *pmd=0000000024544003, *pte=002000003202bfd3
[  358.366543@2] 
[  358.368185@2] CPU: 2 PID: 3273 Comm: grab Tainted: G           O 3.14.29 #1
[  358.375181@2] task: ffffffc02306f000 ti: ffffffc0258f0000 task.ti: ffffffc0258f0000
[  358.382742@2] PC is at 0x7f8b89c0b0
[  358.386122@2] LR is at 0x4028b8
[  358.389236@2] pc : [<0000007f8b89c0b0>] lr : [<00000000004028b8>] pstate: a0000000
[  358.396730@2] sp : 0000007ffcc1e400
[  358.400190@2] x29: 0000007ffcc1e410 x28: 0000000000418000 
[  358.405614@2] x27: 000000009efc1808 x26: 0000000000000000 
[  358.411047@2] x25: 0000007f8a7e6010 x24: 0000000000405300 
[  358.416481@2] x23: 0000000000000000 x22: 0000007f8afd0010 
[  358.421915@2] x21: 000000000000007f x20: 0000007f89ffc010 
[  358.427348@2] x19: 0000000000418000 x18: 0000000000030e1d 
[  358.432782@2] x17: 0000000000418000 x16: 0000007f8b89bf90 
[  358.438216@2] x15: 0000000000000454 x14: 0000000000000000 
[  358.443650@2] x13: 0000000000000000 x12: 0000000000000000 
[  358.449084@2] x11: 0000000000000000 x10: 0000000000000000 
[  358.454517@2] x9 : 0000000000000000 x8 : 0000000000000000 
[  358.459951@2] x7 : 0000000000000000 x6 : 0000000000000000 
[  358.465385@2] x5 : 0000007f282cc3f8 x4 : 0000007f272f83f8 
[  358.470819@2] x3 : 0000007f8b5befd0 x2 : ffffffff9cd0d398 
[  358.476252@2] x1 : 0000007f8a5eb010 x0 : 0000007f8afd0010 
[  358.481686@2] 
[  389.352508@2] grab[3277]: unhandled level 3 permission fault (11) at 0x7fa0c4c000, esr 0x9200004f
[  389.355725@2] pgd = ffffffc023781000
[  389.359303@2] [7fa0c4c000] *pgd=0000000024f86003, *pmd=000000002303c003, *pte=002000003202bfd3
[  389.367794@2] 
[  389.369448@2] CPU: 2 PID: 3277 Comm: grab Tainted: G           O 3.14.29 #1
[  389.376334@2] task: ffffffc02306f000 ti: ffffffc025864000 task.ti: ffffffc025864000
[  389.383977@2] PC is at 0x7fa0f290b0
[  389.387374@2] LR is at 0x4028b8
[  389.390488@2] pc : [<0000007fa0f290b0>] lr : [<00000000004028b8>] pstate: a0000000
[  389.397981@2] sp : 0000007fdd5e0e40
[  389.401441@2] x29: 0000007fdd5e0e50 x28: 0000000000418000 
[  389.406865@2] x27: 000000009efc1808 x26: 0000000000000000 
[  389.412299@2] x25: 0000007f9fe73010 x24: 0000000000405300 
[  389.417732@2] x23: 0000000000000000 x22: 0000007fa065d010 
[  389.423166@2] x21: 000000000000007f x20: 0000007f9f689010 
[  389.428600@2] x19: 0000000000418000 x18: 0000000000030e1d 
[  389.434034@2] x17: 0000000000418000 x16: 0000007fa0f28f90 
[  389.439468@2] x15: 0000000000000454 x14: 0000000000000000 
[  389.444901@2] x13: 0000000000000000 x12: 0000000000000000 
[  389.450335@2] x11: 0000000000000000 x10: 0000000000000000 
[  389.455768@2] x9 : 0000000000000000 x8 : 0000000000000000 
[  389.461202@2] x7 : 0000000000000000 x6 : 0000000000000000 
[  389.466636@2] x5 : 0000007f3d9593f8 x4 : 0000007f3c9853f8 
[  389.472070@2] x3 : 0000007fa0c4bfd0 x2 : ffffffff9cd0d398 
[  389.477504@2] x1 : 0000007f9fc78010 x0 : 0000007fa065d010 
[  389.482937@2] 
[  420.348961@2] grab[3283]: unhandled level 3 permission fault (11) at 0x7f7a718000, esr 0x9200004f
[  420.352179@2] pgd = ffffffc024416000
[  420.355714@2] [7f7a718000] *pgd=00000000236da003, *pmd=00000000236fb003, *pte=002000003202bfd3
[  420.364250@2] 
[  420.365893@2] CPU: 2 PID: 3283 Comm: grab Tainted: G           O 3.14.29 #1
[  420.372801@2] task: ffffffc0236b6000 ti: ffffffc025730000 task.ti: ffffffc025730000
[  420.380432@2] PC is at 0x7f7a9f50b0
[  420.383830@2] LR is at 0x4028b8
[  420.386934@2] pc : [<0000007f7a9f50b0>] lr : [<00000000004028b8>] pstate: a0000000
[  420.394444@2] sp : 0000007fc6680410
[  420.397887@2] x29: 0000007fc6680420 x28: 0000000000418000 
[  420.403321@2] x27: 000000009efc1808 x26: 0000000000000000 
[  420.408754@2] x25: 0000007f7993f010 x24: 0000000000405300 
[  420.414188@2] x23: 0000000000000000 x22: 0000007f7a129010 
[  420.419623@2] x21: 000000000000007f x20: 0000007f79155010 
[  420.425056@2] x19: 0000000000418000 x18: 0000000000030e1d 
[  420.430490@2] x17: 0000000000418000 x16: 0000007f7a9f4f90 
[  420.435923@2] x15: 0000000000000454 x14: 0000000000000000 
[  420.441357@2] x13: 0000000000000000 x12: 0000000000000000 
[  420.446791@2] x11: 0000000000000000 x10: 0000000000000000 
[  420.452225@2] x9 : 0000000000000000 x8 : 0000000000000000 
[  420.457658@2] x7 : 0000000000000000 x6 : 0000000000000000 
[  420.463092@2] x5 : 0000007f174253f8 x4 : 0000007f164513f8 
[  420.468526@2] x3 : 0000007f7a717fd0 x2 : ffffffff9cd0d398 
[  420.473959@2] x1 : 0000007f79744010 x0 : 0000007f7a129010 
[  420.479393@2] 

[starz]

my box is k1plus

[starz]

my box is k1plus

Dear @moham96

 

blkid

 

root@k1plus:~# blkid
/dev/mmcblk0p2: LABEL="ROOTFS" UUID="24a7c775-85b5-4c14-b30b-8dfb1070457b" TYPE="ext4"
/dev/mmcblk0p1: LABEL="BOOT" UUID="05FD-7D1A" TYPE="vfat"
 

Edited by starz, 30 July 2018 - 01:03.

[moham96]

@starz, from your kernel log, I see your using webif screenshot which I didn't patch for  mecool devices and can cause kernel crashes, boot the system and shut it down without using the screenshot feature or the grab command.

[pop1234]

I try to build spark7162 to verify that it now works with my fulan/amiko dvbt and run into build failure:

 

Build Configuration:
BB_VERSION        = "1.34.0"
BUILD_SYS         = "i686-linux"
NATIVELSBSTRING   = "linuxmint-18.2"
TARGET_SYS        = "sh4-oe-linux"
MACHINE           = "spark7162"
DISTRO            = "openpli"
DISTRO_VERSION    = "homebuild"
TUNE_FEATURES     = "sh4"

--%<--

NOTE: Running task 2785 of 6067 (/media/ubuntu/b6236065-6145-472b-99ba-a50420f28231/openpli-oe-core/meta-openpli/recipes-multimedia/libdreamdvd/libdreamdvd_1.0.bb:do_compile)
NOTE: Running task 2836 of 6067 (/media/ubuntu/b6236065-6145-472b-99ba-a50420f28231/openpli-oe-core/meta-openpli/recipes-multimedia/libdvbsi++/libdvbsi++_0.3.8.bb:do_patch)
NOTE: recipe libdreamdvd-1.0+gitAUTOINC+02a0e7cb0c-r3: task do_compile: Started
NOTE: recipe libdvbsi++-0.3.8-r0: task do_patch: Started
NOTE: recipe libdvbsi++-0.3.8-r0: task do_patch: Succeeded
NOTE: Running task 2837 of 6067 (/media/ubuntu/b6236065-6145-472b-99ba-a50420f28231/openpli-oe-core/meta-openpli/recipes-multimedia/libdvbsi++/libdvbsi++_0.3.8.bb:do_populate_lic)
NOTE: recipe libdvbsi++-0.3.8-r0: task do_populate_lic: Started
Log data follows:
| DEBUG: SITE files ['endian-little', 'bit-32', 'sh-common', 'common-linux', 'common-glibc', 'sh4-linux', 'common']
| DEBUG: Executing shell function do_compile
| NOTE: make -j 2
| ERROR: oe_runmake failed
| make  all-am
| make[1]: Entering directory '/media/ubuntu/b6236065-6145-472b-99ba-a50420f28231/openpli-oe-core/build/tmp/work/sh4-oe-linux/libdreamdvd/1.0+gitAUTOINC+02a0e7cb0c-r3/build'
| ./sh4-oe-linux-libtool  --tag=CC   --mode=compile sh4-oe-linux-gcc  -ml -m4 --sysroot=/media/ubuntu/b6236065-6145-472b-99ba-a50420f28231/openpli-oe-core/build/tmp/work/sh4-oe-linux/libdreamdvd/1.0+gitAUTOINC+02a0e7cb0c-r3/recipe-sysroot -DHAVE_CONFIG_H -I. -I../git     -O2 -pipe -g -feliminate-unused-debug-types -fdebug-prefix-map=/media/ubuntu/b6236065-6145-472b-99ba-a50420f28231/openpli-oe-core/build/tmp/work/sh4-oe-linux/libdreamdvd/1.0+gitAUTOINC+02a0e7cb0c-r3=/usr/src/debug/libdreamdvd/1.0+gitAUTOINC+02a0e7cb0c-r3 -fdebug-prefix-map=/media/ubuntu/b6236065-6145-472b-99ba-a50420f28231/openpli-oe-core/build/tmp/work/sh4-oe-linux/libdreamdvd/1.0+gitAUTOINC+02a0e7cb0c-r3/recipe-sysroot-native= -fdebug-prefix-map=/media/ubuntu/b6236065-6145-472b-99ba-a50420f28231/openpli-oe-core/build/tmp/work/sh4-oe-linux/libdreamdvd/1.0+gitAUTOINC+02a0e7cb0c-r3/recipe-sysroot=  -c -o main.lo ../git/main.c
| sh4-oe-linux-libtool: compile:  sh4-oe-linux-gcc -ml -m4 --sysroot=/media/ubuntu/b6236065-6145-472b-99ba-a50420f28231/openpli-oe-core/build/tmp/work/sh4-oe-linux/libdreamdvd/1.0+gitAUTOINC+02a0e7cb0c-r3/recipe-sysroot -DHAVE_CONFIG_H -I. -I../git -O2 -pipe -g -feliminate-unused-debug-types -fdebug-prefix-map=/media/ubuntu/b6236065-6145-472b-99ba-a50420f28231/openpli-oe-core/build/tmp/work/sh4-oe-linux/libdreamdvd/1.0+gitAUTOINC+02a0e7cb0c-r3=/usr/src/debug/libdreamdvd/1.0+gitAUTOINC+02a0e7cb0c-r3 -fdebug-prefix-map=/media/ubuntu/b6236065-6145-472b-99ba-a50420f28231/openpli-oe-core/build/tmp/work/sh4-oe-linux/libdreamdvd/1.0+gitAUTOINC+02a0e7cb0c-r3/recipe-sysroot-native= -fdebug-prefix-map=/media/ubuntu/b6236065-6145-472b-99ba-a50420f28231/openpli-oe-core/build/tmp/work/sh4-oe-linux/libdreamdvd/1.0+gitAUTOINC+02a0e7cb0c-r3/recipe-sysroot= -c ../git/main.c  -fPIC -DPIC -o .libs/main.o
| ../git/main.c: In function 'ddvd_run':
| ../git/main.c:1170:8: error: 'for' loop initial declarations are only allowed in C99 or C11 mode
|         for (int z = 0; z < 2040; z++) {
|         ^
| ../git/main.c:1170:8: note: use option -std=c99, -std=gnu99, -std=c11 or -std=gnu11 to compile your code
| Makefile:493: recipe for target 'main.lo' failed
| make[1]: *** [main.lo] Error 1
| make[1]: Leaving directory '/media/ubuntu/b6236065-6145-472b-99ba-a50420f28231/openpli-oe-core/build/tmp/work/sh4-oe-linux/libdreamdvd/1.0+gitAUTOINC+02a0e7cb0c-r3/build'
| Makefile:371: recipe for target 'all' failed
| make: *** [all] Error 2
| WARNING: /media/ubuntu/b6236065-6145-472b-99ba-a50420f28231/openpli-oe-core/build/tmp/work/sh4-oe-linux/libdreamdvd/1.0+gitAUTOINC+02a0e7cb0c-r3/temp/run.do_compile.10095:1 exit 1 from 'exit 1'
| ERROR: Function failed: do_compile (log file is located at /media/ubuntu/b6236065-6145-472b-99ba-a50420f28231/openpli-oe-core/build/tmp/work/sh4-oe-linux/libdreamdvd/1.0+gitAUTOINC+02a0e7cb0c-r3/temp/log.do_compile.10095)
NOTE: recipe libdreamdvd-1.0+gitAUTOINC+02a0e7cb0c-r3: task do_compile: Failed
NOTE: Running task 2838 of 6067 (/media/ubuntu/b6236065-6145-472b-99ba-a50420f28231/openpli-oe-core/meta-openpli/recipes-multimedia/libdvbsi++/libdvbsi++_0.3.8.bb:do_configure)
NOTE: recipe libdvbsi++-0.3.8-r0: task do_populate_lic: Succeeded
NOTE: recipe libdvbsi++-0.3.8-r0: task do_configure: Started
NOTE: recipe libdvbsi++-0.3.8-r0: task do_configure: Succeeded
NOTE: Tasks Summary: Attempted 2838 tasks of which 2834 didn't need to be rerun and 1 failed.

Summary: 1 task failed:
  /media/ubuntu/b6236065-6145-472b-99ba-a50420f28231/openpli-oe-core/meta-openpli/recipes-multimedia/libdreamdvd/libdreamdvd_1.0.bb:do_compile
Summary: There were 2 ERROR messages shown, returning a non-zero exit code.

 

Any clue how to 'enforce' C99 or C11 mode while compiling?

A quick search learns that "you should compile the code using -std=c99 or -std=gnu99."

Where should I add this?
 

 

@dsmi

try

decompress folder libdreamdvd in pli-extras/meta-fulan/recipes-multimedia/

 

and rebuild

Attached Files

•  libdreamdvd.zip   3.12KB   3 downloads

[blinkosm]

finally i build my own image for dm520 and it working 100% no problem boot

thanks to persian prince and masterG

[Persian Prince]

Good to hear

 

Is epgcache1 ok too?

[blinkosm]

yes epgcache is ok thanks

[Persian Prince]

Notice: Now you have two options for the image!

 

1- PLi experience: https://github.com/P...xample-dm7020hd which is very similar to original Open PLi.

 

2- pli-extras: https://github.com/P...xample-dm7020hd which is our vision of PLi

 

Enjoy

[Persian Prince]

Notice: Now you have two options for the image!

 

1- PLi experience: https://github.com/P...xample-dm7020hd which is very similar to original Open PLi.

 

2- pli-extras: https://github.com/P...xample-dm7020hd which is our vision of PLi

 

Enjoy