2740 replies to this topic

[dsmi]

I gave it another try to build openpli for fulan/amiko spark7162 and now latest (no local changes nor patches) seem to be unbuildable:

NOTE: Your conf/bblayers.conf has been automatically updated.
NOTE: Your conf/bblayers.conf has been automatically updated.
Loading cache...done.
Loaded 1727 entries from dependency cache.
Parsing recipes...WARNING: /media/ubuntu/b6236065-6145-472b-99ba-a50420f28231/openpli-oe-core/meta-openpli/recipes-multimedia/libdreamdvd/libdreamdvd_1.0.bb: Unable to get checksum for libdreamdvd SRC_URI entry libdreamdvd-1.0-support_sh4.patch: file could not be found
WARNING: /media/ubuntu/b6236065-6145-472b-99ba-a50420f28231/openpli-oe-core/meta-vuplus/recipes-bsp/drivers/vuplus-shutdown.bb: Unable to get checksum for vuplus-shutdown SRC_URI entry turnoff_power: file could not be found
WARNING: /media/ubuntu/b6236065-6145-472b-99ba-a50420f28231/openpli-oe-core/openembedded-core/meta/recipes-extended/ghostscript/ghostscript_9.20.bb: Unable to get checksum for ghostscript SRC_URI entry objarch.h: file could not be found
done.
Parsing of 3104 .bb files complete (1297 cached, 1807 parsed). 3915 targets, 725 skipped, 0 masked, 0 errors.
NOTE: There are 2 recipes to be removed from sysroot sh4, removing...
NOTE: There are 4 recipes to be removed from sysroot spark7162, removing...
NOTE: Resolving any missing task queue dependencies
NOTE: Runtime target 'rt7777-sh4' is unbuildable, removing...
Missing or unbuildable dependency chain was: ['rt7777-sh4']
NOTE: Runtime target 'packagegroup-base-ipv6' is unbuildable, removing...
Missing or unbuildable dependency chain was: ['packagegroup-base-ipv6', 'rt7777-sh4']
NOTE: Runtime target 'packagegroup-base' is unbuildable, removing...
Missing or unbuildable dependency chain was: ['packagegroup-base', 'rt7777-sh4']

Summary: There were 3 WARNING messages shown.
Summary: There were 2 ERROR messages shown, returning a non-zero exit code.



Any help/fix would be appreciated.

Edited by dsmi, 30 July 2018 - 20:22.

[bumperbee]

Thanks very much Persian Prince for all your hard work and the passion of helping others.

I wonder could be use on version 2 (Dm7020Hdv2)?

Best Regards 

[Persian Prince]

Yes why not, everything we use for dm7020hd could be used for dm7020hdv2 too

 

dm7020hdv2 is dm7020hd only with a different nand flash that's all.

Edited by Persian Prince, 31 July 2018 - 04:41.

[Persian Prince]

There is no need for https://forums.openp...ndpost&p=913600 so remove what you added.

 

I did remove rt7777 too.

[bumperbee]

Thanks again Master Persian Prince. It seem like the image is require to be build which I had failed many times and got my whole harddisk wipe-out previously. But I think I need to try this again so I would have better knowledge in this technology.

Best Regards

[blinkosm]

persian prince what the diference between building image with openpli image and pli-extras images

[fairbird]

here the diference (more wifi drivers more plugins ...etc)

https://github.com/P...nigma2-image.bb

[Persian Prince]

For now

Later you will see enigma2 patches and dedicated things too ...

[blinkosm]

here the diference (more wifi drivers more plugins ...etc)

https://github.com/P...nigma2-image.bb

 

 

For now

Later you will see enigma2 patches and dedicated things too ...

 

 

thanks for the information

Edited by blinkosm, 31 July 2018 - 12:51.

[ftp21_]

Which DVBAPI versiion use Enigma2?

Edited by ftp21_, 31 July 2018 - 18:58.

[moham96]

HI, I need a wetekplay test image, Does anyone have an already built one ?

[bihsound]

Thank you for the detailed instructions. One question please. It takes a while (hours) to compile the project. Is this normal? Also, if I make a change to some of the code, do I need to recompile the whole thing again?

[Persian Prince]

Thank you for the detailed instructions. One question please. It takes a while (hours) to compile the project. Is this normal? Also, if I make a change to some of the code, do I need to recompile the whole thing again?

 

It's normal and it depends on your hardware, if you're using on a VM you need to give it more ram then more cpu.

 

I'm using Intel Xeon E5-2650 with 32GB Ram but as I don't have SSD it's not so good, try it on a Samsung SSD like nvme sockets and you'll get your image less than a hour

 

If you did change some code just increase the PR like this: https://github.com/P...e5d16297b152150

 

And if you're using a bbappend file like https://github.com/P...nigma2.bbappend whenever the main repo get updated it will be rebuilded.

 

Don't forget to share what you think might be good because I send merge requests to PLi repos and the rest in pli-extras.

[moham96]

News for mecool devices owners, I was able to get enigma2 work at tuning to frequency and scan by using 32 bit userspace programs (apparrently the avl6862 drivers only work if the program using them (enigma2 in our case) is compiled for armv7(32 bit) and not armv8(64 bit).

You can't compile an image yet since I can't find a way to tell bitbake to compile the whole userspace as armv7 except the kernel recipe as armv8.

also right now enigma2 doesn't function fully it only tunes, and the FE_SET_PROPERTY bad address error is gone, but still I can't find channels.

drivers log:

[ 3804.256802@2] AVL: avl6862_set_tone: tone: 1
[ 3804.257474@2] AVL: avl6862_set_voltage: volt: 2
[ 3804.271573@2] AVL: avl6862_set_voltage: volt: 1
[ 3804.283594@1] R848: r848_set_params: delivery_system=5 frequency=1136000 symbol_rate=30000000 bandwidth_hz=0
[ 3804.302367@1] R848: r848_set_params: R848_SetPllData for DVB-S
[ 3804.302562@1] R848: r848_set_params: R848_SetStandard=35
[ 3804.307821@1] R848: r848_set_params: R848_SetFrequency=1136000 KHz
[ 3804.314388@1] R848: R848_GetLockStatus: R848_GETLOCKSTATUS=0x79
[ 3804.319810@1] R848: r848_set_params: Tuner Locked.
[ 3804.325032@1] AVL: avl6862_set_dvbs: Freq:1136000 Mhz,sym:30000000 Khz
[ 3804.551320@1] remote: release ircode = 0x40,
[ 3804.551360@1] remote: scancode = 0x018f, maptable = 0,code:0x00000000
[ 3804.552128@1] 
[ 3804.562680@1] DMX: dmx_add_feed: dmx_add_feed: DMX_TYPE_SEC ret:-1 sf_ret:1
[ 3804.564884@1] DMX: dmx_alloc_chan: allocate channel(id:4 PID:8191)
[ 3804.571013@1] DMX: dmx_get_record_flag: channel:31 record_flag:0 linked:1
[ 3804.577736@1] DMX: dmx_enable: dmx->source:0 fec_sel:0 fec_core_sel:0 record:0 hi_bsf:0 dmx->dump_ts_select:0
[ 3804.587569@1] DMX: dmx_chan_add_filter: channel(id:4 PID:0x1fff) add filter(id:2)
[ 3804.594983@1] DMX: dmx_set_filter_regs: set filter (id:2) registers 1608
[ 3804.601628@1] DMX: dmx_set_filter_regs: write fm 8011:4001fff
[ 3804.607316@1] DMX: dmx_set_filter_regs: write fm 8021:84009fff
[ 3804.613095@1] DMX: dmx_set_filter_regs: write fm 8031:84009fff
[ 3804.618874@1] DMX: dmx_set_filter_regs: write fm 8041:84009fff
[ 3804.624652@1] DMX: dmx_set_filter_regs: write fm 8051:84009fff
[ 3804.630431@1] DMX: dmx_set_filter_regs: write fm 8061:84009fff
[ 3804.636210@1] DMX: dmx_set_filter_regs: write fm 8071:84009fff
[ 3804.641989@1] DMX: dmx_set_filter_regs: write fm 8081:84009fff
[ 3804.647767@1] DMX: dmx_set_filter_regs: write fm 8091:84009fff
[ 3804.653546@1] DMX: dmx_set_filter_regs: write fm 80a1:84009fff
[ 3804.659325@1] DMX: dmx_set_filter_regs: write fm 80b1:84009fff
[ 3804.665101@1] DMX: dmx_set_filter_regs: write fm 80c1:84009fff
[ 3804.670880@1] DMX: dmx_set_filter_regs: write fm 80d1:84009fff
[ 3804.676659@1] DMX: dmx_set_filter_regs: write fm 80e1:84009fff
[ 3804.682437@1] DMX: dmx_set_filter_regs: write fm 80f1:84009fff
[ 3804.688218@1] DMX: dmx_set_filter_regs: write fm comp 12
[ 3804.693479@1] DMX: dmx_add_feed: dmx_add_feed: DMX_TYPE_SEC ret:-1 sf_ret:1
[ 3804.700377@1] DMX: dmx_alloc_chan: allocate channel(id:5 PID:0)
[ 3804.706245@1] DMX: dmx_get_record_flag: channel:31 record_flag:0 linked:1
[ 3804.712971@1] DMX: dmx_enable: dmx->source:0 fec_sel:0 fec_core_sel:0 record:0 hi_bsf:0 dmx->dump_ts_select:0
[ 3804.722804@1] DMX: dmx_chan_add_filter: channel(id:5 PID:0x0) add filter(id:3)
[ 3804.729961@1] DMX: dmx_set_filter_regs: set filter (id:3) registers 1608
[ 3804.736604@1] DMX: dmx_set_filter_regs: write fm 8011:4000500
[ 3804.742295@1] DMX: dmx_set_filter_regs: write fm 8021:84008500
[ 3804.748074@1] DMX: dmx_set_filter_regs: write fm 8031:84008500
[ 3804.753853@1] DMX: dmx_set_filter_regs: write fm 8041:84008500
[ 3804.759631@1] DMX: dmx_set_filter_regs: write fm 8051:84008500
[ 3804.765410@1] DMX: dmx_set_filter_regs: write fm 8061:84008500
[ 3804.771189@1] DMX: dmx_set_filter_regs: write fm 8071:84008500
[ 3804.776967@1] DMX: dmx_set_filter_regs: write fm 8081:84008500
[ 3804.782746@1] DMX: dmx_set_filter_regs: write fm 8091:84008500
[ 3804.788525@1] DMX: dmx_set_filter_regs: write fm 80a1:84008500
[ 3804.794304@1] DMX: dmx_set_filter_regs: write fm 80b1:84008500
[ 3804.800083@1] DMX: dmx_set_filter_regs: write fm 80c1:84008500
[ 3804.805861@1] DMX: dmx_set_filter_regs: write fm 80d1:84008500
[ 3804.811640@1] DMX: dmx_set_filter_regs: write fm 80e1:84008500
[ 3804.817419@1] DMX: dmx_set_filter_regs: write fm 80f1:84008500
[ 3804.823197@1] DMX: dmx_set_filter_regs: write fm comp 12
[ 3804.828482@0] DMX: process_section: section ready:01000000
[ 3804.833895@0] DMX: process_section: 24. sec_busy:01000000 sec_num:3
[ 3805.295909@0] DMX: process_section: section ready:01000000
[ 3805.295963@0] DMX: process_section: 24. sec_busy:01000000 sec_num:3
[ 3805.771497@0] DMX: process_section: section ready:01000000
[ 3805.771546@0] DMX: process_section: 24. sec_busy:01000000 sec_num:3
[ 3806.246234@0] DMX: process_section: section ready:01000000
[ 3806.246281@0] DMX: process_section: 24. sec_busy:01000000 sec_num:3
[ 3806.721071@0] DMX: process_section: section ready:01000000
[ 3806.721122@0] DMX: process_section: 24. sec_busy:01000000 sec_num:3
[ 3807.196414@0] DMX: process_section: section ready:01000000
[ 3807.196462@0] DMX: process_section: 24. sec_busy:01000000 sec_num:3
[ 3807.671065@0] DMX: process_section: section ready:01000000
[ 3807.671114@0] DMX: process_section: 24. sec_busy:01000000 sec_num:3
[ 3808.145859@0] DMX: process_section: section ready:01000000
[ 3808.145905@0] DMX: process_section: 24. sec_busy:01000000 sec_num:3
[ 3808.620765@0] DMX: process_section: section ready:01000000
[ 3808.620815@0] DMX: process_section: 24. sec_busy:01000000 sec_num:3
[ 3808.830204@1] DMX: dmx_remove_filter: channel(id:5 PID:0x0) remove filter(id:3)
[ 3808.831870@1] DMX: dmx_set_filter_regs: set filter (id:3) registers 1608
[ 3808.838514@1] DMX: dmx_set_filter_regs: write fm 8011:4001fff
[ 3808.844201@1] DMX: dmx_set_filter_regs: write fm 8021:84009fff
[ 3808.849980@1] DMX: dmx_set_filter_regs: write fm 8031:84009fff
[ 3808.855758@1] DMX: dmx_set_filter_regs: write fm 8041:84009fff
[ 3808.861537@1] DMX: dmx_set_filter_regs: write fm 8051:84009fff
[ 3808.867316@1] DMX: dmx_set_filter_regs: write fm 8061:84009fff
[ 3808.873095@1] DMX: dmx_set_filter_regs: write fm 8071:84009fff
[ 3808.878873@1] DMX: dmx_set_filter_regs: write fm 8081:84009fff
[ 3808.884652@1] DMX: dmx_set_filter_regs: write fm 8091:84009fff
[ 3808.890431@1] DMX: dmx_set_filter_regs: write fm 80a1:84009fff
[ 3808.896209@1] DMX: dmx_set_filter_regs: write fm 80b1:84009fff
[ 3808.901988@1] DMX: dmx_set_filter_regs: write fm 80c1:84009fff
[ 3808.907767@1] DMX: dmx_set_filter_regs: write fm 80d1:84009fff
[ 3808.913546@1] DMX: dmx_set_filter_regs: write fm 80e1:84009fff
[ 3808.919324@1] DMX: dmx_set_filter_regs: write fm 80f1:84009fff
[ 3808.925105@1] DMX: dmx_set_filter_regs: write fm comp 12
[ 3808.930366@1] DMX: dmx_remove_feed: dmx[0]_rm_recchan[5]
[ 3808.935626@1] DMX: dmx_free_chan: free channel(id:5 PID:0x0)
[ 3808.941239@1] DMX: dmx_get_record_flag: channel:31 record_flag:0 linked:1
[ 3808.947964@1] DMX: dmx_enable: dmx->source:0 fec_sel:0 fec_core_sel:0 record:0 hi_bsf:0 dmx->dump_ts_select:0
[ 3808.957796@1] DMX: dmx_remove_filter: channel(id:4 PID:0x1fff) remove filter(id:3)
[ 3808.965293@1] DMX: dmx_set_filter_regs: set filter (id:3) registers 1608
[ 3808.971935@1] DMX: dmx_set_filter_regs: write fm 8011:4001fff
[ 3808.977627@1] DMX: dmx_set_filter_regs: write fm 8021:84009fff
[ 3808.983406@1] DMX: dmx_set_filter_regs: write fm 8031:84009fff
[ 3808.989185@1] DMX: dmx_set_filter_regs: write fm 8041:84009fff
[ 3808.994963@1] DMX: dmx_set_filter_regs: write fm 8051:84009fff
[ 3809.000742@1] DMX: dmx_set_filter_regs: write fm 8061:84009fff
[ 3809.006521@1] DMX: dmx_set_filter_regs: write fm 8071:84009fff
[ 3809.012300@1] DMX: dmx_set_filter_regs: write fm 8081:84009fff
[ 3809.018079@1] DMX: dmx_set_filter_regs: write fm 8091:84009fff
[ 3809.023857@1] DMX: dmx_set_filter_regs: write fm 80a1:84009fff
[ 3809.029636@1] DMX: dmx_set_filter_regs: write fm 80b1:84009fff
[ 3809.035415@1] DMX: dmx_set_filter_regs: write fm 80c1:84009fff
[ 3809.041193@1] DMX: dmx_set_filter_regs: write fm 80d1:84009fff
[ 3809.046972@1] DMX: dmx_set_filter_regs: write fm 80e1:84009fff
[ 3809.052751@1] DMX: dmx_set_filter_regs: write fm 80f1:84009fff
[ 3809.058529@1] DMX: dmx_set_filter_regs: write fm comp 12
[ 3809.063791@1] DMX: dmx_remove_feed: dmx[0]_rm_recchan[4]
[ 3809.069052@1] DMX: dmx_free_chan: free channel(id:4 PID:0x1fff)
[ 3809.074919@1] DMX: dmx_get_record_flag: channel:31 record_flag:0 linked:1
[ 3809.081646@1] DMX: dmx_enable: dmx->source:0 fec_sel:0 fec_core_sel:0 record:0 hi_bsf:0 dmx->dump_ts_select:0
[ 3809.093243@1] DMX: dmx_add_feed: dmx_add_feed: DMX_TYPE_SEC ret:-1 sf_ret:1
[ 3809.098380@1] DMX: dmx_alloc_chan: allocate channel(id:4 PID:8191)
[ 3809.104505@1] DMX: dmx_get_record_flag: channel:31 record_flag:0 linked:1
[ 3809.111230@1] DMX: dmx_enable: dmx->source:0 fec_sel:0 fec_core_sel:0 record:0 hi_bsf:0 dmx->dump_ts_select:0
[ 3809.121063@1] DMX: dmx_chan_add_filter: channel(id:4 PID:0x1fff) add filter(id:3)
[ 3809.128479@1] DMX: dmx_set_filter_regs: set filter (id:3) registers 1608
[ 3809.135122@1] DMX: dmx_set_filter_regs: write fm 8011:4420442
[ 3809.140813@1] DMX: dmx_set_filter_regs: write fm 8021:84008400
[ 3809.146592@1] DMX: dmx_set_filter_regs: write fm 8031:84008400
[ 3809.152370@1] DMX: dmx_set_filter_regs: write fm 8041:84008400
[ 3809.158149@1] DMX: dmx_set_filter_regs: write fm 8051:84008400
[ 3809.163927@1] DMX: dmx_set_filter_regs: write fm 8061:84008400
[ 3809.169706@1] DMX: dmx_set_filter_regs: write fm 8071:84008400
[ 3809.175485@1] DMX: dmx_set_filter_regs: write fm 8081:84008400
[ 3809.181263@1] DMX: dmx_set_filter_regs: write fm 8091:84008400
[ 3809.187042@1] DMX: dmx_set_filter_regs: write fm 80a1:84008400
[ 3809.192821@1] DMX: dmx_set_filter_regs: write fm 80b1:84008400
[ 3809.198600@1] DMX: dmx_set_filter_regs: write fm 80c1:84008400
[ 3809.204378@1] DMX: dmx_set_filter_regs: write fm 80d1:84008400
[ 3809.210157@1] DMX: dmx_set_filter_regs: write fm 80e1:84008400
[ 3809.215936@1] DMX: dmx_set_filter_regs: write fm 80f1:84008400
[ 3809.221715@1] DMX: dmx_set_filter_regs: write fm comp 12
[ 3809.226977@1] DMX: dmx_add_feed: dmx_add_feed: DMX_TYPE_SEC ret:-1 sf_ret:1
[ 3809.233876@1] DMX: dmx_alloc_chan: allocate channel(id:5 PID:17)
[ 3809.239829@1] DMX: dmx_get_record_flag: channel:31 record_flag:0 linked:1
[ 3809.246556@1] DMX: dmx_enable: dmx->source:0 fec_sel:0 fec_core_sel:0 record:0 hi_bsf:0 dmx->dump_ts_select:0
[ 3809.256388@1] DMX: dmx_chan_add_filter: channel(id:5 PID:0x11) add filter(id:4)
[ 3809.263632@1] DMX: dmx_set_filter_regs: set filter (id:4) registers 1608
[ 3809.270274@1] DMX: dmx_set_filter_regs: write fm 8012:5421fff
[ 3809.275966@1] DMX: dmx_set_filter_regs: write fm 8022:85009fff
[ 3809.281745@1] DMX: dmx_set_filter_regs: write fm 8032:85009fff
[ 3809.287523@1] DMX: dmx_set_filter_regs: write fm 8042:85009fff
[ 3809.293302@1] DMX: dmx_set_filter_regs: write fm 8052:85009fff
[ 3809.299081@1] DMX: dmx_set_filter_regs: write fm 8062:85009fff
[ 3809.304860@1] DMX: dmx_set_filter_regs: write fm 8072:85009fff
[ 3809.310638@1] DMX: dmx_set_filter_regs: write fm 8082:85009fff
[ 3809.316417@1] DMX: dmx_set_filter_regs: write fm 8092:85009fff
[ 3809.322196@1] DMX: dmx_set_filter_regs: write fm 80a2:85009fff
[ 3809.327975@1] DMX: dmx_set_filter_regs: write fm 80b2:85009fff
[ 3809.333753@1] DMX: dmx_set_filter_regs: write fm 80c2:85009fff
[ 3809.339532@1] DMX: dmx_set_filter_regs: write fm 80d2:85009fff
[ 3809.345311@1] DMX: dmx_set_filter_regs: write fm 80e2:85009fff
[ 3809.351090@1] DMX: dmx_set_filter_regs: write fm 80f2:85009fff
[ 3809.356868@1] DMX: dmx_set_filter_regs: write fm comp 22
[ 3810.531394@0] DMX: process_section: section ready:01000000
[ 3810.531450@0] DMX: process_section: 24. sec_busy:01000000 sec_num:4
[ 3811.862395@1] DMX: dmx_remove_filter: channel(id:5 PID:0x11) remove filter(id:4)
[ 3811.864153@1] DMX: dmx_set_filter_regs: set filter (id:4) registers 1608
[ 3811.870793@1] DMX: dmx_set_filter_regs: write fm 8012:1fff1fff
[ 3811.876570@1] DMX: dmx_set_filter_regs: write fm 8022:9fff9fff
[ 3811.882348@1] DMX: dmx_set_filter_regs: write fm 8032:9fff9fff
[ 3811.888127@1] DMX: dmx_set_filter_regs: write fm 8042:9fff9fff
[ 3811.893906@1] DMX: dmx_set_filter_regs: write fm 8052:9fff9fff
[ 3811.899685@1] DMX: dmx_set_filter_regs: write fm 8062:9fff9fff
[ 3811.905464@1] DMX: dmx_set_filter_regs: write fm 8072:9fff9fff
[ 3811.911242@1] DMX: dmx_set_filter_regs: write fm 8082:9fff9fff
[ 3811.917021@1] DMX: dmx_set_filter_regs: write fm 8092:9fff9fff
[ 3811.922800@1] DMX: dmx_set_filter_regs: write fm 80a2:9fff9fff
[ 3811.928578@1] DMX: dmx_set_filter_regs: write fm 80b2:9fff9fff
[ 3811.934357@1] DMX: dmx_set_filter_regs: write fm 80c2:9fff9fff
[ 3811.940136@1] DMX: dmx_set_filter_regs: write fm 80d2:9fff9fff
[ 3811.945915@1] DMX: dmx_set_filter_regs: write fm 80e2:9fff9fff
[ 3811.951693@1] DMX: dmx_set_filter_regs: write fm 80f2:9fff9fff
[ 3811.957473@1] DMX: dmx_set_filter_regs: write fm comp 12
[ 3811.962732@1] DMX: dmx_remove_feed: dmx[0]_rm_recchan[5]
[ 3811.967993@1] DMX: dmx_free_chan: free channel(id:5 PID:0x11)
[ 3811.973690@1] DMX: dmx_get_record_flag: channel:31 record_flag:0 linked:1
[ 3811.980414@1] DMX: dmx_enable: dmx->source:0 fec_sel:0 fec_core_sel:0 record:0 hi_bsf:0 dmx->dump_ts_select:0
[ 3811.990247@1] DMX: dmx_remove_filter: channel(id:4 PID:0x1fff) remove filter(id:4)
[ 3811.997748@1] DMX: dmx_set_filter_regs: set filter (id:4) registers 1608
[ 3812.004390@1] DMX: dmx_set_filter_regs: write fm 8012:1fff1fff
[ 3812.010169@1] DMX: dmx_set_filter_regs: write fm 8022:9fff9fff
[ 3812.015947@1] DMX: dmx_set_filter_regs: write fm 8032:9fff9fff
[ 3812.021726@1] DMX: dmx_set_filter_regs: write fm 8042:9fff9fff
[ 3812.027505@1] DMX: dmx_set_filter_regs: write fm 8052:9fff9fff
[ 3812.033284@1] DMX: dmx_set_filter_regs: write fm 8062:9fff9fff
[ 3812.039062@1] DMX: dmx_set_filter_regs: write fm 8072:9fff9fff
[ 3812.044841@1] DMX: dmx_set_filter_regs: write fm 8082:9fff9fff
[ 3812.050620@1] DMX: dmx_set_filter_regs: write fm 8092:9fff9fff
[ 3812.056399@1] DMX: dmx_set_filter_regs: write fm 80a2:9fff9fff
[ 3812.062177@1] DMX: dmx_set_filter_regs: write fm 80b2:9fff9fff
[ 3812.067956@1] DMX: dmx_set_filter_regs: write fm 80c2:9fff9fff
[ 3812.073735@1] DMX: dmx_set_filter_regs: write fm 80d2:9fff9fff
[ 3812.079514@1] DMX: dmx_set_filter_regs: write fm 80e2:9fff9fff
[ 3812.085292@1] DMX: dmx_set_filter_regs: write fm 80f2:9fff9fff
[ 3812.091071@1] DMX: dmx_set_filter_regs: write fm comp 12
[ 3812.096332@1] DMX: dmx_remove_feed: dmx[0]_rm_recchan[4]
[ 3812.101593@1] DMX: dmx_free_chan: free channel(id:4 PID:0x1fff)
[ 3812.107460@1] DMX: dmx_get_record_flag: channel:31 record_flag:0 linked:1
[ 3812.114187@1] DMX: dmx_enable: dmx->source:0 fec_sel:0 fec_core_sel:0 record:0 hi_bsf:0 dmx->dump_ts_select:0
[ 3815.278553@1] AVL: avl6862_set_tone: tone: 1
[ 3815.279228@1] AVL: avl6862_set_voltage: volt: 2
[ 3815.282761@3] AVL: avl6862_set_voltage: volt: 2

enigma2 log

ActionMap] Keymap 'SetupActions' -> Action = 'save'
nim 0
is compatible with DVB-S
add sat transponder
Add Sat: frequ: 10886 symbol: 30000 pol: 0 fec: 0 inversion: 2 modulation: 1 system: 0 rolloff0 pilot2 is_id-1 pls_mode1 pls_code0
orbpos: 70
[Skin] Processing screen: ServiceScan
ServiceScanCreateSummary
[SKIN] Parsing embedded skin <embedded-in-'ServiceScanSummary'>
[Skin] Processing screen: <embedded-in-'ServiceScanSummary'>
[eDVBFrontend] opening frontend 0
[eDVBChannel] getDemux cap=00
[eDVBResourceManager] allocate demux cap=00
[eDVBResourceManager] allocating demux adapter=0, demux=0, source=-1 fesource=0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] DMX_SET_SOURCE Frontend0 failed: Invalid argument
[eDVBFrontend] (0)tune
[eDVBSatelliteEquipmentControl] direct_connected 1
[eDVBSatelliteEquipmentControl] canTune 1
[eDVBSatelliteEquipmentControl] lnb 0 found
[eDVBSatelliteEquipmentControl] sat 70 found
[eDVBSatelliteEquipmentControl] ret1 15000
[eDVBSatelliteEquipmentControl] ret5 15000
[eDVBSatelliteEquipmentControl] ret 15000, score old 0
[eDVBSatelliteEquipmentControl] score new 15000
[eDVBSatelliteEquipmentControl] final score 15005
[eDVBSatelliteEquipmentControl] RotorCmd ffffffff, lastRotorCmd ffffffff
[eDVBFrontend] prepare_sat System 0 Freq 10886000 Pol 0 SR 30000000 INV 2 FEC 0 orbpos 70 system 0 modulation 1 pilot 2, rolloff 0, is_id -1, pls_mode 1, pls_code 0
[eDVBFrontend] tuning to 1136 mhz
[eDVBChannel] OURSTATE: tuning
[eDVBFrontend] invalidate current switch params
[eDVBFrontend] setVoltage 2
[eDVBFrontend] sleep 10ms
[eDVBFrontend] set sequence pos 3
[eDVBFrontend] update current switch params
[eDVBFrontend] startTuneTimeout 5000
[eDVBFrontend] setFrontend 1
[eDVBFrontend] setting frontend 0
[eDVBFrontend] (0)fe event: status 0, inversion off, m_tuning 1
[eDVBFrontend] sleep 500ms
[eDVBFrontend] (0)fe event: status 1f, inversion off, m_tuning 2
[eDVBChannel] OURSTATE: ok
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=0
[eDVBScan] got pat, err -1
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=17
[eDVBScan] got sdt -1
[eDVBScan] channel done!
[eDVBScan] the current channel's ID was not corrected - not adding channel.
[eDVBScan] no channels left: 1 scanned, 0 unavailable, 0 database.
[eDVBDB] Renumbering...
[eDVBDB] ---- saving lame channel db
[eDVBDB] saved 0 channels and 0 services!
[eComponentScan] scan done!
[eDVBFrontend] close frontend 0

it's a problem with the demuxer I think, maybe a problem with the amldecoder library

[erbas]

@moham96

 

I admire your effort and your competence

I have been accompanying here every day the sacrifice of your work

Thank you and very little

When I can finish, I will gladly help you !!

Edited by erbas, 1 August 2018 - 18:21.

[dsmi]

another spin to build openpli for the unsupported spark7162 (latest version, bleeding edge, no local changes)

NOTE: Your conf/bblayers.conf has been automatically updated.
NOTE: Your conf/bblayers.conf has been automatically updated.
Parsing recipes...WARNING: /media/ubuntu/b6236065-6145-472b-99ba-a50420f28231/openpli-oe-core/meta-openpli/recipes-multimedia/libdreamdvd/libdreamdvd_1.0.bb: Unable to get checksum for libdreamdvd SRC_URI entry libdreamdvd-1.0-support_sh4.patch: file could not be found
WARNING: /media/ubuntu/b6236065-6145-472b-99ba-a50420f28231/openpli-oe-core/meta-vuplus/recipes-bsp/drivers/vuplus-shutdown.bb: Unable to get checksum for vuplus-shutdown SRC_URI entry turnoff_power: file could not be found
WARNING: /media/ubuntu/b6236065-6145-472b-99ba-a50420f28231/openpli-oe-core/openembedded-core/meta/recipes-extended/ghostscript/ghostscript_9.20.bb: Unable to get checksum for ghostscript SRC_URI entry objarch.h: file could not be found
done.
Parsing of 3098 .bb files complete (0 cached, 3098 parsed). 3909 targets, 725 skipped, 0 masked, 0 errors.
NOTE: There are 1 recipes to be removed from sysroot allarch, removing...
NOTE: There are 1 recipes to be removed from sysroot spark7162, removing...
NOTE: Resolving any missing task queue dependencies

Build Configuration:
BB_VERSION = "1.34.0"
BUILD_SYS = "i686-linux"
NATIVELSBSTRING = "linuxmint-18.2"
TARGET_SYS = "sh4-oe-linux"
MACHINE = "spark7162"
DISTRO = "openpli"
DISTRO_VERSION = "pli-extras"
TUNE_FEATURES = "sh4"
meta-oe
meta-filesystems
meta-multimedia
meta-networking
meta-python
meta-webserver = "HEAD:dfbdd28d206a74bf264c2f7ee0f7b3e5af587796"
meta = "HEAD:93dd2f9f3edf0584f9e806c629611d645dd72dbf"
meta-openpli = "develop:877f467bb10d672bfb9dfafe8ac8d35aa3bbe199"
meta-vuplus = "HEAD:d6f0477dc48bad742290f588efd4d9da604cfb29"
meta-xsarius.pli5 = "HEAD:0b498ddfd3ca9091c1158830222c6c03d7025c42"
meta-qviart = "HEAD:f2d263cbb9de121f14aabd60981e8670cf148bd2"
meta-xp = "HEAD:2f818d2ee1efbf0a4536d8384d716a0767cf7039"
meta-xtrend = "HEAD:ac054abbe235f33f6a69e7a8ff0fa9a7efa84f59"
meta-formuler = "HEAD:e1d33c48edb119dcc3163855b0b1af510912ef52"
meta-gfutures = "HEAD:4015ce2bb7c46cd10574eff3100f67fb74c38bda"
meta-xpeedc = "HEAD:f12908a5573de8a6a06ad9f75081846a590511c4"
meta-zgemma = "HEAD:9c0ae72060437fb6951f82e64f1e0e882cf00f95"
meta-edision = "HEAD:7af176f81a7aca30200d6958229d56c973cee393"
meta-miraclebox = "HEAD:d44871d4d1f357d5b38488ed505b48fa8c8feff3"
meta-spycat = "HEAD:a19f11bbcdcad969e9f6f8d2c30df0653427d4cb"
meta-gi = "HEAD:01fd1e8256f53d40371e65514e13a53ef53e400d"
meta-sab = "HEAD:92262feb14e4005c8096150daac7313e9cb3d85a"
meta-gigablue = "HEAD:7e437da8e19274143229f2c52e62917cb33d9d1c"
meta-amiko = "HEAD:eb5c966a3ba38388abdcda61ed07fb056e4d488b"
meta-axasuhd = "HEAD:dfc1465665f504fdc4d6fc9a401e630b04123211"
meta-local = "develop:877f467bb10d672bfb9dfafe8ac8d35aa3bbe199"
meta-qt5 = "HEAD:c6aa602d0640040b470ee81de39726276ddc0ea3"
meta-amlogic = "HEAD:386f3ff1cb30a19e5d0a42f9983723e2847aa04b"
meta-ax = "HEAD:1d852b4eca365ed4560643cb2e3cba09a78a3d49"
meta-azbox = "HEAD:df30c02b07f55c3b89e7b5808eb7aa126613423f"
meta-blackbox = "HEAD:1ac8f7ff34539dba46212e195ca1425bf093466d"
meta-ceryon = "HEAD:2f5d5982b1cce64600bb243790cff32d9e2ab57e"
meta-cube = "HEAD:a391b50516232375048ecfcd8f9721e495d644c5"
meta-dags = "HEAD:a5f798c9bf68c55d86999e903d6cb81d080d19e0"
meta-dinobot = "HEAD:9d18839d0d742f1b248a0d10d15baea8325ff3b5"
meta-dream = "HEAD:dcf136f8b98d4a3479b65f11acc06a05c4e872ce"
meta-ebox = "HEAD:7a4224974eb65e38ab4282831b7f37a0bd62ca3c"
meta-entwopia = "HEAD:ea01aaff38031cc004c22ea4f57a5cbb0eadf311"
meta-fulan = "HEAD:b00e31faaebd874e9981431d2677c88efac1046b"
meta-ini = "HEAD:0fb405af5fc10ff23303d165012bddf66abed5c4"
meta-ixuss = "HEAD:a5b6ab5c51a7e26c1d70fc6858304d73d3720432"
meta-octagon = "HEAD:e9afb14d9cc978df98efcb04993c5900e1e88748"
meta-odin = "HEAD:8e974d345b73a2067bf6ce22e753d8868796ab1c"
meta-protek = "HEAD:65922f91045c2f62dd93e92fe38d1f32382c3401"
meta-raspberrypi = "HEAD:3bbce841ef3bae1718e9e8b289fa42ec04288c0f"
meta-tiviar = "HEAD:730f89b8bded4089a24e70a9992082c2811cb0d4"
meta-tripledot = "HEAD:301f4a086d9e365362bc71715d2bf6d953927568"
meta-xcore = "HEAD:3ed7062f5a476798a0bcbc6f3a472c26b5e44762"
pli-extras = "develop:6bc0392e6e2b9242f717636c865e28e915ddac54"

Initialising tasks...done.
NOTE: Executing SetScene Tasks
NOTE: Executing RunQueue Tasks
NOTE: Running task 2747 of 5882 (/media/ubuntu/b6236065-6145-472b-99ba-a50420f28231/openpli-oe-core/meta-openpli/recipes-multimedia/libdreamdvd/libdreamdvd_1.0.bb:do_fetch)
NOTE: Running task 2860 of 5882 (/media/ubuntu/b6236065-6145-472b-99ba-a50420f28231/openpli-oe-core/meta-openpli/recipes-multimedia/libdvbsi++/libdvbsi++_0.3.8.bb:do_packagedata)
NOTE: recipe libdreamdvd-1.0+gitAUTOINC+02a0e7cb0c-r3: task do_fetch: Started
NOTE: recipe libdvbsi++-0.3.8-r0: task do_packagedata: Started
WARNING: libdreamdvd-1.0+gitAUTOINC+02a0e7cb0c-r3 do_fetch: Failed to fetch URL file://libdreamdvd-1.0-support_sh4.patch;patch=1, attempting MIRRORS if available
ERROR: libdreamdvd-1.0+gitAUTOINC+02a0e7cb0c-r3 do_fetch: Fetcher failure: Unable to find file file://libdreamdvd-1.0-support_sh4.patch;patch=1 anywhere. The paths that were searched were:
/media/ubuntu/b6236065-6145-472b-99ba-a50420f28231/openpli-oe-core/pli-extras/meta-fulan/recipes-multimedia/libdreamdvd/files/openpli
/media/ubuntu/b6236065-6145-472b-99ba-a50420f28231/openpli-oe-core/meta-openpli/recipes-multimedia/libdreamdvd/libdreamdvd-1.0+gitAUTOINC+02a0e7cb0c/openpli
/media/ubuntu/b6236065-6145-472b-99ba-a50420f28231/openpli-oe-core/meta-openpli/recipes-multimedia/libdreamdvd/libdreamdvd/openpli
/media/ubuntu/b6236065-6145-472b-99ba-a50420f28231/openpli-oe-core/meta-openpli/recipes-multimedia/libdreamdvd/files/openpli
/media/ubuntu/b6236065-6145-472b-99ba-a50420f28231/openpli-oe-core/pli-extras/meta-fulan/recipes-multimedia/libdreamdvd/files/spark7162
/media/ubuntu/b6236065-6145-472b-99ba-a50420f28231/openpli-oe-core/meta-openpli/recipes-multimedia/libdreamdvd/libdreamdvd-1.0+gitAUTOINC+02a0e7cb0c/spark7162
/media/ubuntu/b6236065-6145-472b-99ba-a50420f28231/openpli-oe-core/meta-openpli/recipes-multimedia/libdreamdvd/libdreamdvd/spark7162
/media/ubuntu/b6236065-6145-472b-99ba-a50420f28231/openpli-oe-core/meta-openpli/recipes-multimedia/libdreamdvd/files/spark7162
/media/ubuntu/b6236065-6145-472b-99ba-a50420f28231/openpli-oe-core/pli-extras/meta-fulan/recipes-multimedia/libdreamdvd/files/sti7162
/media/ubuntu/b6236065-6145-472b-99ba-a50420f28231/openpli-oe-core/meta-openpli/recipes-multimedia/libdreamdvd/libdreamdvd-1.0+gitAUTOINC+02a0e7cb0c/sti7162
/media/ubuntu/b6236065-6145-472b-99ba-a50420f28231/openpli-oe-core/meta-openpli/recipes-multimedia/libdreamdvd/libdreamdvd/sti7162
/media/ubuntu/b6236065-6145-472b-99ba-a50420f28231/openpli-oe-core/meta-openpli/recipes-multimedia/libdreamdvd/files/sti7162
/media/ubuntu/b6236065-6145-472b-99ba-a50420f28231/openpli-oe-core/pli-extras/meta-fulan/recipes-multimedia/libdreamdvd/files/sh4
/media/ubuntu/b6236065-6145-472b-99ba-a50420f28231/openpli-oe-core/meta-openpli/recipes-multimedia/libdreamdvd/libdreamdvd-1.0+gitAUTOINC+02a0e7cb0c/sh4
/media/ubuntu/b6236065-6145-472b-99ba-a50420f28231/openpli-oe-core/meta-openpli/recipes-multimedia/libdreamdvd/libdreamdvd/sh4
/media/ubuntu/b6236065-6145-472b-99ba-a50420f28231/openpli-oe-core/meta-openpli/recipes-multimedia/libdreamdvd/files/sh4
/media/ubuntu/b6236065-6145-472b-99ba-a50420f28231/openpli-oe-core/pli-extras/meta-fulan/recipes-multimedia/libdreamdvd/files/
/media/ubuntu/b6236065-6145-472b-99ba-a50420f28231/openpli-oe-core/meta-openpli/recipes-multimedia/libdreamdvd/libdreamdvd-1.0+gitAUTOINC+02a0e7cb0c/
/media/ubuntu/b6236065-6145-472b-99ba-a50420f28231/openpli-oe-core/meta-openpli/recipes-multimedia/libdreamdvd/libdreamdvd/
/media/ubuntu/b6236065-6145-472b-99ba-a50420f28231/openpli-oe-core/meta-openpli/recipes-multimedia/libdreamdvd/files/
/media/ubuntu/b6236065-6145-472b-99ba-a50420f28231/openpli-oe-core/sources
ERROR: libdreamdvd-1.0+gitAUTOINC+02a0e7cb0c-r3 do_fetch: Fetcher failure for URL: 'file://libdreamdvd-1.0-support_sh4.patch;patch=1'. Unable to fetch URL from any source.
ERROR: libdreamdvd-1.0+gitAUTOINC+02a0e7cb0c-r3 do_fetch: Function failed: base_do_fetch
ERROR: Logfile of failure stored in: /media/ubuntu/b6236065-6145-472b-99ba-a50420f28231/openpli-oe-core/build/tmp/work/sh4-oe-linux/libdreamdvd/1.0+gitAUTOINC+02a0e7cb0c-r3/temp/log.do_fetch.5401
NOTE: recipe libdreamdvd-1.0+gitAUTOINC+02a0e7cb0c-r3: task do_fetch: Failed
ERROR: Task (/media/ubuntu/b6236065-6145-472b-99ba-a50420f28231/openpli-oe-core/meta-openpli/recipes-multimedia/libdreamdvd/libdreamdvd_1.0.bb:do_fetch) failed with exit code '1'
NOTE: recipe libdvbsi++-0.3.8-r0: task do_packagedata: Succeeded
NOTE: Tasks Summary: Attempted 2861 tasks of which 2859 didn't need to be rerun and 1 failed.

Summary: 1 task failed:
/media/ubuntu/b6236065-6145-472b-99ba-a50420f28231/openpli-oe-core/meta-openpli/recipes-multimedia/libdreamdvd/libdreamdvd_1.0.bb:do_fetch
Summary: There were 4 WARNING messages shown.
Summary: There were 3 ERROR messages shown, returning a non-zero exit code.


I do have a file libdreamdvd-1.0-support_sh4.patch in
/media/ubuntu/b6236065-6145-472b-99ba-a50420f28231/openpli-oe-core/pli-extras/meta-fulan/recipes-multimedia/libdreamdvd/libdreamdvd/ibdreamdvd-1.0-support_sh4.patch
and that path is not in the paths that were searched

Any suggestion how to fix this?

[Persian Prince]

Fixed: https://github.com/P...48b4e130c676a72

Wait for a team member to update submodules as I don't have access to my build server right now.

[Beeker]

Done

[blinkosm]

i  try to build an image for dm520 with the recent changes and in 99% stuck with this error :

 

./etc/openldap/ldap.conf.default
./etc/shells
./etc/securetty
./etc/sysctl.conf
./etc/inittab
./dev/

. tar: cd: Cannot stat: No such file or directory
| tar: Removing leading `/' from member names
| /home/blinkosm/openpli-oe-core/build/tmp/deploy/images/dm520/
| /home/blinkosm/openpli-oe-core/build/tmp/deploy/images/dm520/openpli-enigma2-pli-extras-dm520.testdata.json
| /home/blinkosm/openpli-oe-core/build/tmp/deploy/images/dm520/.testdata.json
| tar: Exiting with failure status due to previous errors
| WARNING: /home/blinkosm/openpli-oe-core/build/tmp/work/dm520-oe-linux/openpli-enigma2-image/1.0-r0/temp/run.do_image_tar.28459:1 exit 2 from 'tar -cvf /home/blinkosm/openpli-oe-core/build/tmp/work/dm520-oe-linux/openpli-enigma2-image/1.0-r0/deploy-openpli-enigma2-image-image-complete/openpli-enigma2-pli-extras-dm520.rootfs.tar -C /home/blinkosm/openpli-oe-core/build/tmp/work/dm520-oe-linux/openpli-enigma2-image/1.0-r0/rootfs . cd /home/blinkosm/openpli-oe-core/build/tmp/deploy/images/dm520'
| ERROR: Function failed: do_image_tar (log file is located at /home/blinkosm/openpli-oe-core/build/tmp/work/dm520-oe-linux/openpli-enigma2-image/1.0-r0/temp/log.do_image_tar.28459)
ERROR: Task (/home/blinkosm/openpli-oe-core/meta-openpli/recipes-openpli/images/openpli-enigma2-image.bb:do_image_tar) failed with exit code '1'

Edited by blinkosm, 1 August 2018 - 22:35.

[Beeker]

Update again.

pli-extras/update.sh