2740 replies to this topic

[blinkosm]

About the ralink ty5370 is solved i took the driver from openpli4 and its working but epgimport doesnt work could you please added in resipotory of plugins please .. even when i want to install it i got some kind of error like opkg not found and opkg update get me to link of my ubuntu system home/blinkosm/acer7574 something like this

[muhamad]

build for k2pro success:transfer img into sd card

 

test run on k2pro receiver

 

boot ok

remote ok

internet ok

tuner detect(scan satellite chinasat11 98.0E found 45 channel FTA)but no video and audio

 

error:no data transponder"time out reading pat"

 

how to fix this error,,anybody can help me?

[sauna]

k1 plus is the same.

wifi is determined. There is no connection to the network.

dvb settings after the reboot is saved.

no video,saund.

[gcsuri]

Hi, I looked into the 4.9 code... So it's mainly for the latest amlogic cpus so it dropped support for gxb line. Media drivers nearly the same as 3.14 kernel but restructured.

 

Something wrong with the dvb drivers or not compatible with dvbmediasink at mecool line. This is why there is no pictures and gst-launch can't play video files...

vsftpd has a bug: /etc/vsftpd.conf is not owned by root so config file not read on startup.

 

best regards, gcsuri

[gcsuri]

Hi,

 

 if we use alien5 libs we may need to use this patch also: https://github.com/o...46cf1cf40ed3c76

 

best regards, gcsuri

[buc61b]

How to change the skin on this image lol

[Persian Prince]

I'm compiling and uploading test images for all brands/models here: http://www.mediafire...q4d9/pli-extras

 

Don't ask about your brand/model as it takes time to compile and upload

Edited by Persian Prince, 30 August 2018 - 02:47.

[Persian Prince]

I'm compiling and uploading test images for all brands/models here: http://www.mediafire...q4d9/pli-extras

 

Don't ask about your brand/model as it takes time to compile and upload

 

And if you couldn't see your box picture in Open WebIF or there was a problem with rc don't complain as there is not much contributions here: https://github.com/P...extra_rc_models

 

I will update all brands/models later for https://github.com/P...extra_rc_models as it seems nobody cares ...

Edited by Persian Prince, 30 August 2018 - 03:07.

[ycf83]

 

@Beeker thnk's a lot men

 

i will try this night im not at home now.

 

thank you

 

You can expect more problems.

 

For Python2-native.

pli-extras/recipes-devtools/python/python-native_2.7.13.bbappend

 

change

SRC_URI += "file://fix-gc-alignment.patch;apply=no"

to:

SRC_URI += "file://fix-gc-alignment.patch;apply=yes"

Also you need to update elfutils ( to 0.173)

 

 

Delete the elfutils directory in openpli-oe-core/meta-openpli/recipes-devtools/.

 

Extract the elfutils.zip file  and copy the elfutils directory to openpli-oe-core/meta-openpli/recipes-devtools/

 

 

 

 

thnk's bro , problem with upx fixed , and yes i get problem  with elfutils, i don't see your post last night  ,im with  gcc 8.2.0 , thnk's for help,   i ill try again,

 

 

u are awesome !

[DrData]

@Persian Prince
I installed the Extra-Image on my Gigablue 800solo. I dont have tested Antenna or CAM related stuff,
because I use the 800solo only as Network-Client for my Ultimo4k. In my enviroment the Image works very good.
Nice to have a new good lightweight image for this old STB.
Thanx a lot for your work!

[zeros]

August 30: Test feed updated for: dm7020hd / dm7020hdv2 / dm900 / dm920
If any of them needs a fresh image, let me know. I think that online update should be sufficient.

[Persian Prince]

New fresh images are here: https://m.mediafire....q4d9/pli-extras

[HFX]

Persian Prince Thanks for :  openpli-enigma2-pli-extras-gbquadplus_usb

[moham96]

Hi, I looked into the 4.9 code... So it's mainly for the latest amlogic cpus so it dropped support for gxb line. Media drivers nearly the same as 3.14 kernel but restructured.

 

Something wrong with the dvb drivers or not compatible with dvbmediasink at mecool line. This is why there is no pictures and gst-launch can't play video files...

vsftpd has a bug: /etc/vsftpd.conf is not owned by root so config file not read on startup.

 

best regards, gcsuri

Yes, I noticed the dropped support as well.

the dvb drivers right now has an issue where the demuxer is stuck and doesn't reset after tuning, I'm not sure about this but I think tvheadend uses a differ approach, instead of routing the ts to the demuxer it uses libffmpeg to decode the streams and since ffmpeg is already tested by amlogic it works without a problem.

[moham96]

Hi,

 

 if we use alien5 libs we may need to use this patch also: https://github.com/o...46cf1cf40ed3c76

 

best regards, gcsuri

AFAIK servicemp3 is only used for playing media files and not dvb stream, already have bunch of alien5 dvb patches :

https://github.com/P...5-enigma2.patch

[moham96]

I think the best course of action right now is to wait for mainline Linux support, once Maxime finishes his work on the video decoder, the next thing is probably DVB, this will allow us to use the default demuxer device driver with meson platform code, so we will have no issues hopefully.

 

unfortunately, the merge window for Linux 4.19 closed without merging the video decoder patches and the subsystem guys don't seem to be very enthusiastic about the patches either so this might take longer than expected.

 

Regards

[bumperbee]

August 30: Test feed updated for: dm7020hd / dm7020hdv2 / dm900 / dm920
If any of them needs a fresh image, let me know. I think that online update should be sufficient.

 

Thanks very much Master Zeros

[bumperbee]

New fresh images are here: https://m.mediafire....q4d9/pli-extras

Thanks very much Master Persian Prince

[takitr]

For linux 4.9 add dvb
Modify file “Makefile” in folder “hardware\aml-4.9\amlogic\media_modules\drivers\stream_input”, and add the path
of demodulation driver. the demodulation driver is porting by yourself.

Look pdf

http://openlinux.aml...s_V20170814.pdf

[moham96]

For linux 4.9 add dvb
Modify file “Makefile” in folder “hardware\aml-4.9\amlogic\media_modules\drivers\stream_input”, and add the path
of demodulation driver. the demodulation driver is porting by yourself.

Look pdf

http://openlinux.aml...s_V20170814.pdf

Sadly, I don't have an S905D box to work on, my box is S905 and that buildroot is intended for S905D