Jump to content


Photo

Crashlog bij image flashen met de 6.2 RC

Uno4K

  • Please log in to reply
29 replies to this topic

#1 cobus

  • Senior Member
  • 4,500 posts

+63
Good

Posted 22 April 2018 - 12:24

zie crashlog.

OpenPLi Enigma2 crash log

crashdate=zo apr 22 13:20:52 2018
compiledate=Apr 22 2018
skin=PLi-FullNightHD/skin.xml
sourcedate=2018-04-21
branch=rc
rev=c864759
component=Enigma2

stbmodel=uno4k
stbmodel=dm8000
kernelcmdline=root=/dev/mmcblk0p4 rootfstype=ext4 rootflags=data=journal rootwait rw coherent_pool=2M vmalloc=633m bmem=637m@383m bmem=637m@2431m
nimsockets=NIM Socket 0:
imageissue=openpli 6.2-rc %h


No handlers could be found for logger "AT"
REMOVE Peer vuuno4k
REMOVE Peer vuuno4k
ADD Peer et10000=et10000.local:8001
ADD Peer et10000=et10000.local:8001
[eDVBPESReader] Created. Opening demux
[eDVBPESReader] Created. Opening demux
[eDVBPESReader] Created. Opening demux
Traceback (most recent call last):
  File "/usr/lib/enigma2/python/Screens/FlashImage.py", line 73, in getImagesList
TypeError: unbound method get_machine_name() must be called with HardwareInfo instance as first argument (got nothing instead)


dmesg

<4>[   92.172125] [VID]: VIDEO_SET_STREAMTYPE 1 
<4>[   92.176699] [VID]: VIDEO_SELECT_SOURCE 1  0
<4>[   92.181571] [VID]: VIDEO_PLAY 1  5 0
<4>[   92.190641] [VID]: VIDEO_CONTINUE 1  1 
<4>[   92.195118] [VID]: VIDEO_CLEAR_BUFFER 1  1 0
<4>[   92.360418] [VID]: VIDEO_STOP 0  1
<4>[   92.365402] [VID]: VIDEO_SELECT_SOURCE 0  0
<6>[   92.630381] sd 2:0:0:0: [sda]  
<4>[   92.633568] Sense Key : 0x1 [current] 
<6>[   92.637432] sd 2:0:0:0: [sda]  
<4>[   92.640616] ASC=0x37 ASCQ=0x0
<4>[   94.809399] [AUD]: AUDIO_SET_MUTE 0 
<4>[   94.813836] [AUD]: AUDIO_SET_MIXER -775610744 
<4>[   94.818365] [AUD]: AUDIO_SET_MIXER : amixl 0, amixr 0
<4>[   94.823564] [AUD]: AUDIO_SET_MIXER : next left volume -4355, right volume -4355
<4>[   94.831034] [AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70
<4>[   98.231414] [AUD]: AUDIO_SET_MIXER -775610744 
<4>[   98.235923] [AUD]: AUDIO_SET_MIXER : amixl 60, amixr 60
<4>[   98.241189] [AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70
<4>[   98.248203] [AUD]: AUDIO_SET_MIXER : next left volume -4355, right volume -4355
<4>[   98.354133] FE tune
<4>[   98.469068] [AUD]: AUDIO_SELECT_SOURCE 0 
<4>[   98.474096] [AUD]: AUDIO_SELECT_SOURCE clean up 
<4>[   98.480284] [AUD]: AUDIO_SET_BYPASS_MODE 1 
<4>[   98.485971] [AUD]: downmix 0 state : 0
<4>[   98.491349] [AUD]: AUDIO_PAUSE 1 
<4>[   98.495371] [AUD]: AUDIO_PLAY 1 decoder start : 0
<4>[   98.501427] [AUD]: AUDIO_CONTINUE -1 1 aph=0xd2e7c600
<4>[   98.506538] [AUD]: Mute : 0
<4>[   98.510977] [VID]: VIDEO_SELECT_SOURCE 1  0
<4>[   98.515492] [VID]: VIDEO_SET_STREAMTYPE 0 
<4>[   98.519834] [VID]: VIDEO_PLAY 0  2 0
<4>[   98.529412] [VID]: VIDEO_CONTINUE 0  1 
<4>[   98.533477] [VID]: VIDEO_CLEAR_BUFFER 0  1 0
<4>[   98.545234] [AUD]: AUDIO_CHANNEL_SELECT 0 
<4>[   98.696985] [VID]: VIDEO_STOP 0  1
<4>[   98.701500] [VID]: VIDEO_SELECT_SOURCE 0  0
<4>[   98.742020] [AUD]: AUDIO_CONTINUE -1 1 aph=0xd2e7c600
<4>[   98.747139] [AUD]: Mute : 0
<4>[   98.751016] [VID]: VIDEO_SELECT_SOURCE 1  0
<4>[   98.755517] [VID]: VIDEO_SET_STREAMTYPE 0 
<4>[   98.760001] [VID]: VIDEO_PLAY 0  2 0
<4>[   98.769338] [VID]: VIDEO_CONTINUE 0  1 
<4>[   98.773482] [VID]: VIDEO_CLEAR_BUFFER 0  1 0
<4>[   98.936928] [VID]: VIDEO_STOP 0  1
<4>[   98.941444] [VID]: VIDEO_SELECT_SOURCE 0  0
<4>[  102.521091] bcm7252s: hotplug_callback(): 
<4>[  102.521091] Hotplug - status.connected 0:1:0
<4>[  102.528237] bcm7252s: hotplug_callback(): 
<4>[  102.528237] Hotplug - Disconnecting HDMI from display
<4>[  210.113867] bcm7252s: hotplug_callback(): 
<4>[  210.113867] Hotplug - status.connected 1:0:3
<4>[  210.121054] bcm7252s: hotplug_callback(): 
<4>[  210.121054] Hotplug - connecting HDMI to display 0xe

Groetjes Cobus R

 

VU+ UNO 4K FBC DVB C  LCD4linux met Samsung SPF 75H

MAXYTEC MULTIBOX

 

Ziggo (digitaal) Kabel TV (FTV) op alle decoders met oa fallback tuner

 


Re: Crashlog bij image flashen met de 6.2 RC #2 WanWizard

  • PLi® Core member
  • 57,269 posts

+1,213
Excellent

Posted 22 April 2018 - 12:32

Merci. Al gerapporteerd, en ook al gefixt: https://github.com/O...d302dda932ba845


Currently in use: VU+Duo 4K (2xFBC S2), Amiko Viper T2C (T2+fallback), Octagon SF8008 (S2+T2), Zgemma H9.2H (T2+fallback)

Many answers to your question can be found in our new and improved wiki.

Because to health reasons, I will not be active online very often anymore.


Re: Crashlog bij image flashen met de 6.2 RC #3 cobus

  • Senior Member
  • 4,500 posts

+63
Good

Posted 22 April 2018 - 12:56

Thanks voor het snelle oplossen.

Groetjes Cobus R

 

VU+ UNO 4K FBC DVB C  LCD4linux met Samsung SPF 75H

MAXYTEC MULTIBOX

 

Ziggo (digitaal) Kabel TV (FTV) op alle decoders met oa fallback tuner

 


Re: Crashlog bij image flashen met de 6.2 RC #4 cobus

  • Senior Member
  • 4,500 posts

+63
Good

Posted 23 April 2018 - 15:58

Nog steeds dezelfde melding volgens mij.

OpenPLi Enigma2 crash log

crashdate=ma apr 23 16:53:54 2018
compiledate=Apr 23 2018
skin=PLi-FullNightHD/skin.xml
sourcedate=2018-04-22
branch=rc
rev=a1f0f06
component=Enigma2

stbmodel=uno4k
stbmodel=dm8000
kernelcmdline=root=/dev/mmcblk0p4 rootfstype=ext4 rootflags=data=journal rootwait rw coherent_pool=2M vmalloc=633m bmem=637m@383m bmem=637m@2431m
nimsockets=NIM Socket 0:
imageissue=openpli 6.2-rc %h


No handlers could be found for logger "AT"
ADD Peer et10000=et10000.local:8001
ADD Peer et10000=et10000.local:8001
[eDVBPESReader] Created. Opening demux
[eDVBPESReader] Created. Opening demux
[eDVBPESReader] Created. Opening demux
Traceback (most recent call last):
  File "/usr/lib/enigma2/python/Screens/FlashImage.py", line 73, in getImagesList
  File "/usr/lib/enigma2/python/Tools/HardwareInfo.py", line 80, in get_machine_name
NameError: global name 'get_device_model' is not defined


dmesg

<6>[    0.000000] Booting Linux on physical CPU 0x0
<5>[    0.000000] Linux version 3.14.28-1.12 (build@bouwserver2) (gcc version 6.2.0 (GCC) ) #1 SMP Wed Mar 21 21:40:56 CET 2018
<6>[    0.000000] CPU: ARMv7 Processor [420f00f3] revision 3 (ARMv7), cr=30c7387d
<6>[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
<6>[    0.000000] Machine model: UNO4K
<6>[    0.000000] moving dtb from 0x0000000007628000 to 0x0000000000842510
<6>[    0.000000] bmem: Reserved 637 MiB at 0x0000000017f00000
<6>[    0.000000] bmem: Reserved 637 MiB at 0x0000000097f00000
<6>[    0.000000] cma: Reserved 16 MiB at 0x0000000016400000
<6>[    0.000000] Memory policy: Data cache writealloc
<7>[    0.000000] On node 0 totalpages: 524288
<7>[    0.000000]   Normal zone: 750 pages used for memmap
<7>[    0.000000]   Normal zone: 0 pages reserved
<7>[    0.000000]   Normal zone: 96000 pages, LIFO batch:31
<7>[    0.000000]   HighMem zone: 3346 pages used for memmap
<7>[    0.000000]   HighMem zone: 428288 pages, LIFO batch:31
<6>[    0.000000] MCP: Enabling write pairing
<6>[    0.000000] PERCPU: Embedded 8 pages/cpu @d75bd000 s8768 r8192 d15808 u32768
<7>[    0.000000] pcpu-alloc: s8768 r8192 d15808 u32768 alloc=8*4096
<7>[    0.000000] pcpu-alloc: [0] 0 [0] 1 
<4>[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 523538
<5>[    0.000000] Kernel command line: root=/dev/mmcblk0p4 rootfstype=ext4 rootflags=data=journal rootwait rw coherent_pool=2M vmalloc=633m bmem=637m@383m bmem=637m@2431m
<6>[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
<6>[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
<4>[    0.000000] Memory: 742456K/2097152K available (5760K kernel code, 332K rwdata, 1880K rodata, 252K init, 188K bss, 1338312K reserved, 16384K cma-reserved, 400376K highmem)
<5>[    0.000000] Virtual kernel memory layout:
<5>[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
<5>[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
<5>[    0.000000]     vmalloc : 0xd7800000 - 0xff000000   ( 632 MB)
<5>[    0.000000]     lowmem  : 0xc0000000 - 0xd7700000   ( 375 MB)
<5>[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
<5>[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
<5>[    0.000000]       .text : 0xc0008000 - 0xc077e4c4   (7642 kB)
<5>[    0.000000]       .init : 0xc077f000 - 0xc07be240   ( 253 kB)
<5>[    0.000000]       .data : 0xc07c0000 - 0xc0813398   ( 333 kB)
<5>[    0.000000]        .bss : 0xc08133a0 - 0xc0842510   ( 189 kB)
<6>[    0.000000] Hierarchical RCU implementation.
<6>[    0.000000] 	RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
<6>[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
<6>[    0.000000] NR_IRQS:16 nr_irqs:16 16
<6>[    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xfc403000, parent irq: 93)
<6>[    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xfc3e1000, parent irq: 64)
<6>[    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xfc410640, parent irq: 95)
<6>[    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xfc4d1200, parent irq: 58)
<6>[    0.000000] Architected cp15 timer(s) running at 27.00MHz (virt).
<6>[    0.000004] sched_clock: 56 bits at 27MHz, resolution 37ns, wraps every 2545165795328ns
<6>[    0.000009] Switching to timer-based delay loop
<6>[    0.000263] Console: colour dummy device 80x30
<6>[    0.000284] Calibrating delay loop (skipped), value calculated using timer frequency.. 54.00 BogoMIPS (lpj=27000)
<6>[    0.000292] pid_max: default: 32768 minimum: 301
<6>[    0.000381] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
<6>[    0.000386] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
<6>[    0.006014] CPU: Testing write buffer coherency: ok
<6>[    0.006201] CPU0: update cpu_power 1024
<6>[    0.006208] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
<6>[    0.006386] Setting up static identity map for 0x580188 - 0x5801e0
<4>[    0.008772] CPU1: Booted secondary processor
<6>[    0.008792] CPU1: update cpu_power 1024
<6>[    0.008795] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
<6>[    0.008891] Brought up 2 CPUs
<6>[    0.008902] SMP: Total of 2 processors activated.
<6>[    0.008907] CPU: All CPU(s) started in SVC mode.
<6>[    0.009256] devtmpfs: initialized
<6>[    0.012517] VFP support v0.3: implementor 42 architecture 4 part 00 variant 0 rev 0
<6>[    0.013518] regulator-dummy: no parameters
<6>[    0.013704] NET: Registered protocol family 16
<6>[    0.014579] DMA: preallocated 2048 KiB pool for atomic coherent allocations
<6>[    0.015358] cpuidle: using governor ladder
<6>[    0.015365] cpuidle: using governor menu
<4>[    0.017817] irq: no irq domain found for /rdb/interrupt-controller@f040a700 !
<4>[    0.017953] irq: no irq domain found for /rdb/interrupt-controller@f0417380 !
<4>[    0.021018] irq: no irq domain found for /rdb/interrupt-controller@f03e1a00 !
<6>[    0.021282] syscon f0404000.syscon: regmap [mem 0xf0404000-0xf0404523] registered
<6>[    0.021429] syscon f0404100.syscon: regmap [mem 0xf0404100-0xf040415b] registered
<6>[    0.021568] syscon f040415c.syscon: regmap [mem 0xf040415c-0xf040419b] registered
<6>[    0.021705] syscon f0410700.syscon: regmap [mem 0xf0410700-0xf041070b] registered
<6>[    0.021834] syscon f041070c.syscon: regmap [mem 0xf041070c-0xf0410713] registered
<6>[    0.021983] syscon f1101004.syscon: regmap [mem 0xf1101004-0xf1101403] registered
<6>[    0.022116] syscon f1181004.syscon: regmap [mem 0xf1181004-0xf1181403] registered
<6>[    0.022261] syscon f0404080.syscon: regmap [mem 0xf0404080-0xf0404083] registered
<6>[    0.022389] syscon f04040a4.syscon: regmap [mem 0xf04040a4-0xf04040a7] registered
<6>[    0.022515] syscon f03e0154.syscon: regmap [mem 0xf03e0154-0xf03e0157] registered
<6>[    0.022644] syscon f03e0354.syscon: regmap [mem 0xf03e0354-0xf03e0357] registered
<6>[    0.022774] syscon f03e0400.syscon: regmap [mem 0xf03e0400-0xf03e0403] registered
<4>[    0.023426] irq: no irq domain found for /rdb/interrupt-controller@f0417380 !
<6>[    0.023914] syscon f03e2400.syscon: regmap [mem 0xf03e2400-0xf03e27ff] registered
<6>[    0.024049] syscon f0452000.syscon: regmap [mem 0xf0452000-0xf04520ff] registered
<6>[    0.024324] No ATAGs?
<6>[    0.024344] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
<6>[    0.024349] hw-breakpoint: maximum watchpoint size is 8 bytes.
<6>[    0.024518] Broadcom Brahma-B15 readahead cache at: 0xfc3e2478
<6>[    0.038726] bio: create slab <bio-0> at 0
<5>[    0.039394] SCSI subsystem initialized
<7>[    0.039584] libata version 3.00 loaded.
<6>[    0.039955] usbcore: registered new interface driver usbfs
<6>[    0.040034] usbcore: registered new interface driver hub
<6>[    0.040118] usbcore: registered new device driver usb
<6>[    0.040237] Linux video capture interface: v2.00
<6>[    0.040445] pps_core: LinuxPPS API ver. 1 registered
<6>[    0.040449] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
<6>[    0.040502] PTP clock support registered
<6>[    0.041306] Advanced Linux Sound Architecture Driver Initialized.
<6>[    0.042029] cfg80211: Calling CRDA to update world regulatory domain
<6>[    0.042508] brcm-pci f0460000.pcie: adjusting to legacy (broken) pcie DT
<6>[    0.042699] brcm-pci f0490000.pcie: adjusting to legacy (broken) pcie DT
<6>[    0.143008] brcm-pci f0460000.pcie: link down
<6>[    0.243028] brcm-pci f0490000.pcie: link down
<6>[    0.243075] Switched to clocksource arch_sys_counter
<5>[    0.243261] FS-Cache: Loaded
<4>[    0.251952] thermal thermal_zone0: failed to read out thermal zone 0
<6>[    0.252034] NET: Registered protocol family 2
<6>[    0.252424] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
<6>[    0.252447] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
<6>[    0.252485] TCP: Hash tables configured (established 4096 bind 4096)
<6>[    0.252516] TCP: reno registered
<6>[    0.252522] UDP hash table entries: 256 (order: 1, 8192 bytes)
<6>[    0.252533] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
<6>[    0.252636] NET: Registered protocol family 1
<6>[    0.252829] RPC: Registered named UNIX socket transport module.
<6>[    0.252834] RPC: Registered udp transport module.
<6>[    0.252837] RPC: Registered tcp transport module.
<6>[    0.252840] RPC: Registered tcp NFSv4.1 backchannel transport module.
<7>[    0.252847] PCI: CLS 0 bytes, default 64
<6>[    0.253112] hw perfevents: enabled with ARMv7 Cortex-A15 PMU driver, 7 counters available
<6>[    0.254364] futex hash table entries: 512 (order: 3, 32768 bytes)
<4>[    0.255014] bounce pool size: 64 pages
<5>[    0.255453] NFS: Registering the id_resolver key type
<5>[    0.255478] Key type id_resolver registered
<5>[    0.255482] Key type id_legacy registered
<6>[    0.255491] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
<6>[    0.255495] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
<6>[    0.255831] fuse init (API version 7.22)
<6>[    0.255973] msgmni has been set to 700
<6>[    0.256647] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
<6>[    0.256656] io scheduler noop registered
<6>[    0.256660] io scheduler deadline registered
<6>[    0.256679] io scheduler cfq registered (default)
<6>[    0.256892] brcm-gisb-arb f0400000.gisb-arb: registered mem: fc400000, irqs: 258, 259
<6>[    0.272653] brcm-waketimer f0417580.waketimer: registered, with irq 260
<6>[    0.272944] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
<6>[    0.274347] f040a900.serial: ttyS0 at MMIO 0xf040a900 (irq = 107, base_baud = 5062500) is a 16550A
<6>[    1.065276] console [ttyS0] enabled
<6>[    1.069198] f040a940.serial: ttyS1 at MMIO 0xf040a940 (irq = 108, base_baud = 5062500) is a 16550A
<6>[    1.078530] f040a980.serial: ttyS2 at MMIO 0xf040a980 (irq = 109, base_baud = 5062500) is a 16550A
<6>[    1.090718] loop: module loaded
<3>[    1.094496] ahci brcmstb-ahci.0: can't get clock
<6>[    1.099211] ahci brcmstb-ahci.0: SSS flag set, parallel bus scan disabled
<6>[    1.116090] ahci brcmstb-ahci.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl platform mode
<6>[    1.124721] ahci brcmstb-ahci.0: flags: 64bit ncq sntf stag pm clo pmp slum part 
<6>[    1.134193] scsi0 : ahci_platform
<6>[    1.137835] scsi1 : ahci_platform
<6>[    1.141375] ata1: SATA max UDMA/133 mmio [mem 0xf045a000-0xf045aa9b] port 0x100 irq 91
<6>[    1.149308] ata2: SATA max UDMA/133 mmio [mem 0xf045a000-0xf045aa9b] port 0x180 irq 91
<6>[    1.158531] spi_brcmstb f03e3400.spi: 1-lane output, 3-byte address
<6>[    1.164929] spi_brcmstb f03e3400.spi: master is unqueued, this is deprecated
<4>[    1.172251] m25p80 spi32766.0: found mx25l3255e, expected m25p80
<6>[    1.178291] m25p80 spi32766.0: mx25l3255e (4096 Kbytes)
<5>[    1.183547] 5 ofpart partitions found on MTD device spi32766.0
<5>[    1.189390] Creating 5 MTD partitions on "spi32766.0":
<5>[    1.194539] 0x000000000000-0x000000200000 : "flash0.bolt"
<5>[    1.200622] 0x000000200000-0x000000210000 : "flash0.macadr"
<5>[    1.206805] 0x000000210000-0x000000220000 : "flash0.nvram"
<5>[    1.212888] 0x000000220000-0x000000230000 : "flash0.devtree"
<5>[    1.219145] 0x000000000000-0x000000400000 : "flash0"
<6>[    1.225752] libphy: Fixed MDIO Bus: probed
<6>[    1.230547] bcmgenet f0b00000.ethernet: GENET 4.5 EPHY: 0x1001
<6>[    1.247079] libphy: bcmgenet MII bus: probed
<6>[    1.267088] ata1: SATA link down (SStatus 0 SControl 300)
<6>[    1.272532] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
<6>[    1.278386] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
<6>[    1.284842] xhci-brcm: xHCI BRCM driver
<6>[    1.288789] xhci-brcm f0471000.xhci_v2: xHCI Host Controller
<6>[    1.294623] xhci-brcm f0471000.xhci_v2: new USB bus registered, assigned bus number 1
<6>[    1.302726] xhci-brcm f0471000.xhci_v2: irq 149, io mem 0xf0471000
<6>[    1.309461] hub 1-0:1.0: USB hub found
<3>[    1.313242] hub 1-0:1.0: config failed, hub doesn't have any ports! (err -19)
<6>[    1.320502] xhci-brcm f0471000.xhci_v2: xHCI Host Controller
<6>[    1.326322] xhci-brcm f0471000.xhci_v2: new USB bus registered, assigned bus number 2
<6>[    1.334637] hub 2-0:1.0: USB hub found
<6>[    1.338414] hub 2-0:1.0: 2 ports detected
<6>[    1.342790] ehci-brcm: EHCI BRCM driver
<6>[    1.346732] ehci-brcm f0470300.ehci_v2: EHCI Host Controller
<6>[    1.352570] ehci-brcm f0470300.ehci_v2: new USB bus registered, assigned bus number 3
<6>[    1.370534] ehci-brcm f0470300.ehci_v2: irq 145, io mem 0xf0470300
<6>[    1.382081] ehci-brcm f0470300.ehci_v2: USB 2.0 started, EHCI 1.00
<6>[    1.388748] hub 3-0:1.0: USB hub found
<6>[    1.392525] hub 3-0:1.0: 1 port detected
<6>[    1.396657] ehci-brcm f0470500.ehci_v2: EHCI Host Controller
<6>[    1.400088] ata2: SATA link down (SStatus 0 SControl 300)
<6>[    1.407911] ehci-brcm f0470500.ehci_v2: new USB bus registered, assigned bus number 4
<6>[    1.425874] ehci-brcm f0470500.ehci_v2: irq 146, io mem 0xf0470500
<6>[    1.438077] ehci-brcm f0470500.ehci_v2: USB 2.0 started, EHCI 1.00
<6>[    1.444728] hub 4-0:1.0: USB hub found
<6>[    1.448508] hub 4-0:1.0: 1 port detected
<6>[    1.452761] ohci-brcm: OHCI BRCM driver
<6>[    1.456688] ohci-brcm f0470400.ohci_v2: BRCM OHCI controller
<6>[    1.462520] ohci-brcm f0470400.ohci_v2: new USB bus registered, assigned bus number 5
<6>[    1.470399] ohci-brcm f0470400.ohci_v2: irq 147, io mem 0xf0470400
<6>[    1.531537] hub 5-0:1.0: USB hub found
<6>[    1.535313] hub 5-0:1.0: 1 port detected
<6>[    1.539436] ohci-brcm f0470600.ohci_v2: BRCM OHCI controller
<6>[    1.545265] ohci-brcm f0470600.ohci_v2: new USB bus registered, assigned bus number 6
<6>[    1.553150] ohci-brcm f0470600.ohci_v2: irq 148, io mem 0xf0470600
<6>[    1.614528] hub 6-0:1.0: USB hub found
<6>[    1.618305] hub 6-0:1.0: 1 port detected
<6>[    1.622540] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<6>[    1.629088] ehci-pci: EHCI PCI platform driver
<6>[    1.633628] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
<6>[    1.639828] ohci-pci: OHCI PCI platform driver
<6>[    1.644567] usbcore: registered new interface driver usb-storage
<6>[    1.650919] mousedev: PS/2 mouse device common for all mice
<6>[    1.656885] i2c /dev entries driver
<6>[    1.660739] IR NEC protocol handler initialized
<6>[    1.665284] IR RC5(x) protocol handler initialized
<6>[    1.670083] IR RC6 protocol handler initialized
<6>[    1.674622] IR JVC protocol handler initialized
<6>[    1.679161] IR Sony protocol handler initialized
<6>[    1.683789] IR RC5 (streamzap) protocol handler initialized
<6>[    1.689371] IR SANYO protocol handler initialized
<6>[    1.694085] IR MCE Keyboard/mouse protocol handler initialized
<6>[    1.700310] brcmstb_thermal f04d1500.thermal: registered AVS TMON of-sensor driver
<6>[    1.708181] usb 3-1: new high-speed USB device number 2 using ehci-brcm
<4>[    1.708231] cpufreq_cpu0: failed to get cpu0 regulator: -19
<6>[    1.708530] sdhci: Secure Digital Host Controller Interface driver
<6>[    1.708530] sdhci: Copyright(c) Pierre Ossman
<6>[    1.708532] sdhci-pltfm: SDHCI platform and OF driver helper
<6>[    1.709657] mmc0: no vqmmc regulator found
<6>[    1.709659] mmc0: no vmmc regulator found
<6>[    1.740078] mmc0: SDHCI controller on f03e0200.sdhci [f03e0200.sdhci] using ADMA
<6>[    1.754490] usbcore: registered new interface driver usbhid
<6>[    1.762094] usbhid: USB HID core driver
<6>[    1.766589] TCP: cubic registered
<6>[    1.769924] NET: Registered protocol family 17
<5>[    1.776644] Key type dns_resolver registered
<5>[    1.783035] Registering SWP/SWPB emulation handler
<6>[    1.792269] regulator-dummy: disabling
<6>[    1.810613] ALSA device list:
<6>[    1.813605]   No soundcards found.
<6>[    1.817285] Waiting for root device /dev/mmcblk0p4...
<6>[    1.846722] mmc0: BKOPS_EN bit is not set
<6>[    1.856965] mmc0: new high speed MMC card at address 0001
<6>[    1.862763] mmcblk0: mmc0:0001 4FPD3R 3.64 GiB 
<6>[    1.867394] mmcblk0boot0: mmc0:0001 4FPD3R partition 1 4.00 MiB
<6>[    1.873410] mmcblk0boot1: mmc0:0001 4FPD3R partition 2 4.00 MiB
<6>[    1.879418] mmcblk0rpmb: mmc0:0001 4FPD3R partition 3 512 KiB
<6>[    1.888283]  mmcblk0: p1 p2 p3 p4
<6>[    1.894383]  mmcblk0boot1: unknown partition table
<6>[    1.899898]  mmcblk0boot0: unknown partition table
<6>[    1.917755] usb-storage 3-1:1.0: USB Mass Storage device detected
<6>[    1.924087] scsi2 : usb-storage 3-1:1.0
<4>[    2.024577] EXT4-fs: Warning: mounting with data=journal disables delayed allocation and O_DIRECT support!
<6>[    2.030102] usb 4-1: new high-speed USB device number 2 using ehci-brcm
<6>[    2.046567] EXT4-fs (mmcblk0p4): mounted filesystem with journalled data mode. Opts: data=journal
<6>[    2.055486] VFS: Mounted root (ext4 filesystem) on device 179:4.
<6>[    2.065284] devtmpfs: mounted
<6>[    2.068362] Freeing unused kernel memory: 252K (c077f000 - c07be000)
<6>[    2.156630] usb-storage 4-1:1.0: USB Mass Storage device detected
<6>[    2.163179] scsi3 : usb-storage 4-1:1.0
<6>[    2.352849] EXT4-fs (mmcblk0p4): re-mounted. Opts: nodelalloc,data=journal
<5>[    2.531326] random: nonblocking pool is initialized
<4>[    2.691534] procmk_init
<4>[    2.697500] bcm_event: module license 'Proprietary' taints kernel.
<4>[    2.704942] Disabling lock debugging due to kernel taint
<5>[    2.930798] scsi 2:0:0:0: Direct-Access     WD       Elements 25A2    1014 PQ: 0 ANSI: 6
<5>[    2.950246] sd 2:0:0:0: Attached scsi generic sg0 type 0
<5>[    2.951643] sd 2:0:0:0: [sda] Spinning up disk...
<5>[    3.168899] scsi 3:0:0:0: Direct-Access     MPX      Memory Slot - 1  0.00 PQ: 0 ANSI: 0 CCS
<5>[    3.184009] sd 3:0:0:0: [sdb] 2031616 512-byte logical blocks: (1.04 GB/992 MiB)
<5>[    3.191966] sd 3:0:0:0: Attached scsi generic sg1 type 0
<5>[    3.197506] sd 3:0:0:0: [sdb] Write Protect is off
<7>[    3.202340] sd 3:0:0:0: [sdb] Mode Sense: 03 00 00 00
<3>[    3.203178] sd 3:0:0:0: [sdb] No Caching mode page found
<3>[    3.208528] sd 3:0:0:0: [sdb] Assuming drive cache: write through
<5>[    3.215448] scsi 3:0:0:1: Direct-Access     MPX      Memory Slot - 2  0.00 PQ: 0 ANSI: 0 CCS
<3>[    3.228338] sd 3:0:0:0: [sdb] No Caching mode page found
<5>[    3.230562] sd 3:0:0:1: Attached scsi generic sg2 type 0
<3>[    3.239048] sd 3:0:0:0: [sdb] Assuming drive cache: write through
<5>[    3.248829] sd 3:0:0:1: [sdc] Attached SCSI removable disk
<6>[    3.254314]  sdb: sdb1
<3>[    3.264493] sd 3:0:0:0: [sdb] No Caching mode page found
<3>[    3.269840] sd 3:0:0:0: [sdb] Assuming drive cache: write through
<5>[    3.275985] sd 3:0:0:0: [sdb] Attached SCSI removable disk
<4>[    3.452383] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
<4>[    3.951088] ...ready
<5>[    5.962909] sd 2:0:0:0: [sda] 1953458176 512-byte logical blocks: (1.00 TB/931 GiB)
<5>[    5.971773] sd 2:0:0:0: [sda] Write Protect is off
<7>[    5.976638] sd 2:0:0:0: [sda] Mode Sense: 47 00 10 08
<3>[    5.977817] sd 2:0:0:0: [sda] No Caching mode page found
<3>[    5.983246] sd 2:0:0:0: [sda] Assuming drive cache: write through
<3>[    5.999045] sd 2:0:0:0: [sda] No Caching mode page found
<3>[    6.004416] sd 2:0:0:0: [sda] Assuming drive cache: write through
<6>[    6.010661] DVB: registering new adapter (_vuplus_uno4k_)
<6>[    6.063569]  sda: sda1
<3>[    6.069784] sd 2:0:0:0: [sda] No Caching mode page found
<3>[    6.075143] sd 2:0:0:0: [sda] Assuming drive cache: write through
<5>[    6.081276] sd 2:0:0:0: [sda] Attached SCSI disk
<6>[    6.188612] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
<4>[    6.275147] bcm7252s: hotplug_callback(): 
<4>[    6.275147] Hotplug - status.connected 1:0:1
<4>[    6.282248] bcm7252s: hotplug_callback(): 
<4>[    6.282248] Hotplug - connecting HDMI to display 0xe
<6>[    6.493078] brcm_demux_init: $Id: bcm_demux.c,v 0.7 $
<4>[    6.621107] [MPVR]: >> misc_pvr_init
<4>[    6.637694] [VID]: 6bcm7335_video_init
<4>[    6.728196] [AUD]: 6bcm7335_audio_init
<4>[    6.732686] [AUD]: >> bcm_audio_capture_init
<4>[    6.743151] fe_cap.qam : 1, fe_cap.ofd : 0, fe_cap.satellite:0   handle=d4977400 state=d37d4800  config=bf6a6908
<6>[    6.753407] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
<4>[    6.762630] fe_cap.qam : 1, fe_cap.ofd : 0, fe_cap.satellite:0   handle=d4977000 state=d37d4000  config=bf6a6910
<6>[    6.772855] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
<4>[    6.782107] fe_cap.qam : 1, fe_cap.ofd : 0, fe_cap.satellite:0   handle=d41dfc00 state=d3964800  config=bf6a6918
<6>[    6.792347] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
<4>[    6.802241] fe_cap.qam : 1, fe_cap.ofd : 0, fe_cap.satellite:0   handle=d41df800 state=d3964000  config=bf6a6920
<6>[    6.812472] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
<4>[    6.849589] fe_cap.qam : 1, fe_cap.ofd : 0, fe_cap.satellite:0   handle=d41df400 state=d346d800  config=bf6a6928
<6>[    6.859829] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
<4>[    6.869687] fe_cap.qam : 1, fe_cap.ofd : 0, fe_cap.satellite:0   handle=d41df000 state=d346d000  config=bf6a6930
<6>[    6.879959] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
<4>[    6.890218] fe_cap.qam : 1, fe_cap.ofd : 0, fe_cap.satellite:0   handle=d4972c00 state=d3b44800  config=bf6a6938
<6>[    6.900472] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
<4>[    6.910209] fe_cap.qam : 1, fe_cap.ofd : 0, fe_cap.satellite:0   handle=d4972800 state=d3b44000  config=bf6a6940
<6>[    6.920466] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
<4>[    6.930446] bcm7252s: bcm7335_frontend_init(): vtuner1 : 9
<4>[    6.974645] BKNI_P_GetTrackAllocEntry_resize: resizing from 5376->8704
<4>[    6.982793] BKNI_Malloc(linuxkernel) top users:
<4>[    6.982793]     blocks,   bytes, filename:line
<4>[    6.991814]       1117,  239132, BSEAV/lib/utils/balloc.c:31
<6>[    7.041993] input: dreambox advanced remote control (native) as /devices/virtual/input/input0
<6>[    7.057382] [LCD]: registered
<6>[    7.075458] [CI]: registered ci0
<6>[    7.089449] [CI]: CI interface initialised
<6>[    7.089449] 
<6>[    7.103409] [DFP]: registered dbox fp
<6>[    7.114679] [SC]: registered sci0
<4>[    8.580081] system_time_set wakeup mode get 
<4>[    8.644082] system_time_set wakeup mode get 0xc3
<6>[    9.155084] f0b00000.etherne:01: Broadcom BCM7439 (2) PHY revision: 0x10, patch: 1
<6>[    9.166381] f0b00000.ethernet: configuring instance for internal PHY
<6>[   11.168177] libphy: f0b00000.etherne:01 - Link is Down
<6>[   12.419013] libphy: f0b00000.etherne:01 - Link is Up - 1000/Full
<6>[   17.414106] NET: Registered protocol family 10
<6>[   17.560166] Bluetooth: Core ver 2.18
<6>[   17.564130] NET: Registered protocol family 31
<6>[   17.568613] Bluetooth: HCI device and connection manager initialized
<6>[   17.575030] Bluetooth: HCI socket layer initialized
<6>[   17.579943] Bluetooth: L2CAP socket layer initialized
<6>[   17.585059] Bluetooth: SCO socket layer initialized
<4>[   18.133637] [VID]: VIDEO_SET_STREAMTYPE 1 
<4>[   18.138051] [VID]: VIDEO_SELECT_SOURCE 1  0
<4>[   18.142459] [VID]: VIDEO_PLAY 1  5 0
<4>[   18.151654] [VID]: VIDEO_CONTINUE 1  1 
<4>[   18.155520] [VID]: VIDEO_CLEAR_BUFFER 1  1 0
<4>[   18.317510] [VID]: VIDEO_STOP 0  1
<4>[   18.322115] [VID]: VIDEO_SELECT_SOURCE 0  0
<6>[   18.882155] sd 2:0:0:0: [sda]  
<4>[   18.885329] Sense Key : 0x1 [current] 
<6>[   18.889149] sd 2:0:0:0: [sda]  
<4>[   18.892305] ASC=0x37 ASCQ=0x0
<4>[   21.379943] [AUD]: AUDIO_SET_MUTE 0 
<4>[   21.383930] [AUD]: AUDIO_SET_MIXER -755802488 
<4>[   21.388418] [AUD]: AUDIO_SET_MIXER : amixl 0, amixr 0
<4>[   21.393486] [AUD]: AUDIO_SET_MIXER : next left volume 0, right volume 0
<4>[   21.400127] [AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70
<6>[   26.004178] usb 4-1: USB disconnect, device number 2
<6>[   26.295204] usb 4-1: new high-speed USB device number 3 using ehci-brcm
<4>[   28.540475] [AUD]: AUDIO_SET_MIXER -755802488 
<4>[   28.545018] [AUD]: AUDIO_SET_MIXER : amixl 60, amixr 60
<4>[   28.550428] [AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70
<4>[   28.557579] [AUD]: AUDIO_SET_MIXER : next left volume -4355, right volume -4355
<4>[   29.088918] FE tune
<4>[   31.144762] [AUD]: AUDIO_SELECT_SOURCE 0 
<4>[   31.151206] [AUD]: AUDIO_SET_BYPASS_MODE 1 
<4>[   31.155749] [AUD]: downmix 0 state : 0
<4>[   31.159739] [AUD]: AUDIO_PAUSE 1 
<4>[   31.163312] [AUD]: AUDIO_PLAY 1 decoder start : 0
<4>[   31.170042] [AUD]: AUDIO_CONTINUE -1 1 aph=0xd41d1c80
<4>[   31.175142] [AUD]: Mute : 0
<4>[   31.185926] [VID]: VIDEO_SELECT_SOURCE 1  0
<4>[   31.190497] [VID]: VIDEO_SET_STREAMTYPE 0 
<4>[   31.194677] [VID]: VIDEO_PLAY 0  2 0
<4>[   31.203693] [VID]: VIDEO_CONTINUE 0  1 
<4>[   31.207616] [VID]: VIDEO_CLEAR_BUFFER 0  1 0
<4>[   31.218861] [AUD]: AUDIO_CHANNEL_SELECT 0 
<4>[   31.368958] [VID]: VIDEO_STOP 0  1
<4>[   31.373472] [VID]: VIDEO_SELECT_SOURCE 0  0
<4>[   31.427270] [AUD]: AUDIO_CONTINUE -1 1 aph=0xd41d1c80
<4>[   31.432372] [AUD]: Mute : 0
<4>[   31.436208] [VID]: VIDEO_SELECT_SOURCE 1  0
<4>[   31.440623] [VID]: VIDEO_SET_STREAMTYPE 0 
<4>[   31.444772] [VID]: VIDEO_PLAY 0  2 0
<4>[   31.453794] [VID]: VIDEO_CONTINUE 0  1 
<4>[   31.458040] [VID]: VIDEO_CLEAR_BUFFER 0  1 0
<4>[   31.793991] [VID]: VIDEO_STOP 0  1
<4>[   31.798591] [VID]: VIDEO_SELECT_SOURCE 0  0



Groetjes Cobus R

 

VU+ UNO 4K FBC DVB C  LCD4linux met Samsung SPF 75H

MAXYTEC MULTIBOX

 

Ziggo (digitaal) Kabel TV (FTV) op alle decoders met oa fallback tuner

 


Re: Crashlog bij image flashen met de 6.2 RC #5 Tech

  • Forum Moderator
    PLi® Core member
  • 32,463 posts

+336
Excellent

Posted 23 April 2018 - 16:01

Die is gisteren al gefixed....


Aan de rand van de afgrond is een stap voorwaarts niet altijd vooruitgang....

Re: Crashlog bij image flashen met de 6.2 RC #6 cobus

  • Senior Member
  • 4,500 posts

+63
Good

Posted 23 April 2018 - 16:02

Ook heb ik even geprobeerd een oude flashimage.py die van de build van 2 dagen terug en die werkt wel gewoon.


Groetjes Cobus R

 

VU+ UNO 4K FBC DVB C  LCD4linux met Samsung SPF 75H

MAXYTEC MULTIBOX

 

Ziggo (digitaal) Kabel TV (FTV) op alle decoders met oa fallback tuner

 


Re: Crashlog bij image flashen met de 6.2 RC #7 cobus

  • Senior Member
  • 4,500 posts

+63
Good

Posted 23 April 2018 - 16:03

Die is gisteren al gefixed....

Dat kan maar na de laatste update werkt het nog niet dus!!!


Groetjes Cobus R

 

VU+ UNO 4K FBC DVB C  LCD4linux met Samsung SPF 75H

MAXYTEC MULTIBOX

 

Ziggo (digitaal) Kabel TV (FTV) op alle decoders met oa fallback tuner

 


Re: Crashlog bij image flashen met de 6.2 RC #8 Tech

  • Forum Moderator
    PLi® Core member
  • 32,463 posts

+336
Excellent

Posted 23 April 2018 - 16:10

Dan is die niet meegekomen met het bouwproces maar hier staat toch echt dat die is gecommit...


Aan de rand van de afgrond is een stap voorwaarts niet altijd vooruitgang....

Re: Crashlog bij image flashen met de 6.2 RC #9 WanWizard

  • PLi® Core member
  • 57,269 posts

+1,213
Excellent

Posted 23 April 2018 - 16:12

Ik heb net even de rc van vandaag geflasht. En inderdaad. Goes Vaals Dordrecht! Weer gecommit in develop ipv rc. :(


Currently in use: VU+Duo 4K (2xFBC S2), Amiko Viper T2C (T2+fallback), Octagon SF8008 (S2+T2), Zgemma H9.2H (T2+fallback)

Many answers to your question can be found in our new and improved wiki.

Because to health reasons, I will not be active online very often anymore.


Re: Crashlog bij image flashen met de 6.2 RC #10 WanWizard

  • PLi® Core member
  • 57,269 posts

+1,213
Excellent

Posted 23 April 2018 - 16:12

Dan is die niet meegekomen met het bouwproces maar hier staat toch echt dat die is gecommit...

 

Dat is hem niet, het gaan om deze: https://github.com/O...514c3f150173f82


Currently in use: VU+Duo 4K (2xFBC S2), Amiko Viper T2C (T2+fallback), Octagon SF8008 (S2+T2), Zgemma H9.2H (T2+fallback)

Many answers to your question can be found in our new and improved wiki.

Because to health reasons, I will not be active online very often anymore.


Re: Crashlog bij image flashen met de 6.2 RC #11 Tech

  • Forum Moderator
    PLi® Core member
  • 32,463 posts

+336
Excellent

Posted 23 April 2018 - 16:13

Pak eens de nieuwe flashimage.py vanaf github en test die eens....


Aan de rand van de afgrond is een stap voorwaarts niet altijd vooruitgang....

Re: Crashlog bij image flashen met de 6.2 RC #12 cobus

  • Senior Member
  • 4,500 posts

+63
Good

Posted 23 April 2018 - 16:13

Ook dat kan, maar werkt niet zie crashlog en kijk maar na de datum ? heb hem net geupdate daarna herstart toen enigma nog een geherstart en toch de meding toen heb ik even die van 2 dagen terug erop gezet en hij werkt weer maar de chraslog geeft nu ook andere regels aan volgens mij.


Groetjes Cobus R

 

VU+ UNO 4K FBC DVB C  LCD4linux met Samsung SPF 75H

MAXYTEC MULTIBOX

 

Ziggo (digitaal) Kabel TV (FTV) op alle decoders met oa fallback tuner

 


Re: Crashlog bij image flashen met de 6.2 RC #13 Tech

  • Forum Moderator
    PLi® Core member
  • 32,463 posts

+336
Excellent

Posted 23 April 2018 - 16:13

 

Dan is die niet meegekomen met het bouwproces maar hier staat toch echt dat die is gecommit...

 

Dat is hem niet, het gaan om deze: https://github.com/O...514c3f150173f82

 

O, die 'beruchte' onliner


Aan de rand van de afgrond is een stap voorwaarts niet altijd vooruitgang....

Re: Crashlog bij image flashen met de 6.2 RC #14 WanWizard

  • PLi® Core member
  • 57,269 posts

+1,213
Excellent

Posted 23 April 2018 - 16:25

Ja, die...

 

Cobus,

 

Ik heb een nieuwe rc build gestart voor de dm8000, kun je met een kwartiertje of zo updaten, en als die geinstalleerd zijn het daarna nog een keer proberen?


Currently in use: VU+Duo 4K (2xFBC S2), Amiko Viper T2C (T2+fallback), Octagon SF8008 (S2+T2), Zgemma H9.2H (T2+fallback)

Many answers to your question can be found in our new and improved wiki.

Because to health reasons, I will not be active online very often anymore.


Re: Crashlog bij image flashen met de 6.2 RC #15 cobus

  • Senior Member
  • 4,500 posts

+63
Good

Posted 23 April 2018 - 16:27

Ik heb een Vuuno4k ?


Groetjes Cobus R

 

VU+ UNO 4K FBC DVB C  LCD4linux met Samsung SPF 75H

MAXYTEC MULTIBOX

 

Ziggo (digitaal) Kabel TV (FTV) op alle decoders met oa fallback tuner

 


Re: Crashlog bij image flashen met de 6.2 RC #16 littlesat

  • PLi® Core member
  • 52,779 posts

+608
Excellent

Posted 23 April 2018 - 16:29

Die one liner is niet relevant voor de ‘bug’... die staat er helemaal buiten. Het is die .patch die ik aangeleverd has omdat wanwizard per Abuis de () achter HardwareInfo() vergeten was... die met die one liner doet eigenlijk precies hetzelfde van buiten alleen wordt die waarde die terug
Komt bij de init bepaald en niet bij elke aanvraag..

Edited by littlesat, 23 April 2018 - 16:33.

WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W


Re: Crashlog bij image flashen met de 6.2 RC #17 littlesat

  • PLi® Core member
  • 52,779 posts

+608
Excellent

Posted 23 April 2018 - 16:32

Hier was her fout gegaan... https://github.com/O...cbf902912c717eb

WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W


Re: Crashlog bij image flashen met de 6.2 RC #18 littlesat

  • PLi® Core member
  • 52,779 posts

+608
Excellent

Posted 23 April 2018 - 16:48

Uiteindelijk zat er nog een bug in wanwizards code per abuis... een self. Vergeten in regel 80... Mijn one liner code haade die bug er dan weer per abuis uit waardoor het weer een fix werd... die oneliner ga ik wel nog aanpakken hoor... dat gaat nog een fourliner worden....
Ik had alleen niet door dat er stiekem ook een fix in zat... had ik dat geweten dan had ik idd ook geregeld dat deze in rc kwam!

Edited by littlesat, 23 April 2018 - 16:50.

WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W


Re: Crashlog bij image flashen met de 6.2 RC #19 cobus

  • Senior Member
  • 4,500 posts

+63
Good

Posted 23 April 2018 - 17:16

Maar goed is het morgen opgelost?

Groetjes Cobus R

 

VU+ UNO 4K FBC DVB C  LCD4linux met Samsung SPF 75H

MAXYTEC MULTIBOX

 

Ziggo (digitaal) Kabel TV (FTV) op alle decoders met oa fallback tuner

 


Re: Crashlog bij image flashen met de 6.2 RC #20 WanWizard

  • PLi® Core member
  • 57,269 posts

+1,213
Excellent

Posted 23 April 2018 - 17:26

Ik heb een Vuuno4k ?

 

Sorry, scheef gekeken, zag dm8000 in je log staan. ;) Ik zal de uno4k even een schop verkopen...


Currently in use: VU+Duo 4K (2xFBC S2), Amiko Viper T2C (T2+fallback), Octagon SF8008 (S2+T2), Zgemma H9.2H (T2+fallback)

Many answers to your question can be found in our new and improved wiki.

Because to health reasons, I will not be active online very often anymore.






Also tagged with one or more of these keywords: Uno4K

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users