Zgemma H2 Start
Posted 6 September 2018 - 16:54
Zgemma H2 Start
Posted 6 September 2018 - 17:20
What is a H2 start? I know a H2.H and a H2.S.
Can you telnet into the box, and check the output of "lsmod". Is the "tun" module present?
If not, can you check if it is installed with "opkg install kernel-module-tun"?
Can you do "modprobe tun" and then check the "lsmod" output again?
Loading the tun module should create the tun device node. The size is not relevant, it is not a file.
If your openvpn connection isn't activated, add debugging to your config, and check the log in /var/log for the reason why.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 6 September 2018 - 17:30
decoder Zgemma Star H2
---------------------------------------------------------------
Posted 6 September 2018 - 17:40
Have you enabled debugging in your config? Wat does the log file in /var/log say? And the log file on your server?
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 6 September 2018 - 17:51
Posted 6 September 2018 - 17:55
See my previous post(s). And try reading them now.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 6 September 2018 - 18:07
Posted 6 September 2018 - 19:27
How does that box get it's time?
The log you show, is it after a restart of the box and you have OpenVPN autostart?
Problem then could be that OpenVPN starts before the proper time is set.
This was a issue a while back for me too, using OpenATV.
Posted 6 September 2018 - 19:40
Posted 6 September 2018 - 19:44
Posted 6 September 2018 - 19:55
Posted 6 September 2018 - 20:15
/usr/bin/ntpdate ntp1.inrim.it
Posted 6 September 2018 - 22:35
It is, certificates don't work without the proper time. Install the systemtime plugin, it can run ntpdate when the box boots, avoiding this problem.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 6 September 2018 - 23:52
Posted 7 September 2018 - 00:42
Why do you ask for help here if you ignore all questions asked and advice given?
You don't need to install stuff manually, and you don't need to make scripts.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 25 September 2021 - 07:14
I am bringing back this post because after my online update ( update 09/17/2021 ) on openpli 8.1 openvpn dont work .
Openvpn is installed tun but my Edision Mio 4K dont see it .
Commands :
root@osmio4k:~# opkg install openvpn
No packages installed or removed.
root@osmio4k:~# opkg install kernel-module-tun
No packages installed or removed.
root@osmio4k:~# mknod /dev/net/tun c 10 200
mknod: /dev/net/tun: File exists
root@osmio4k:~# modinfo tun
modinfo: ERROR: Module tun not found.
root@osmio4k:~#
Openvpn log :
2021-09-25 08:49:18 us=264093 --cipher is not set. Previous OpenVPN version defaulted to BF-CBC as fallback when cipher negotiation failed in this case. If you need this fallback please add '--data-ciphers-fallback BF-CBC' to your configuration and/or add BF-CBC to --data-ciphers.
2021-09-25 08:49:18 us=264752 WARNING: file '/etc/openvpn/osc/home1.key' is group or others accessible
2021-09-25 08:49:18 us=264833 Current Parameter Settings:
2021-09-25 08:49:18 us=264863 config = '/etc/openvpn/client.conf'
2021-09-25 08:49:18 us=264891 mode = 0
2021-09-25 08:49:18 us=264918 persist_config = DISABLED
2021-09-25 08:49:18 us=264944 persist_mode = 1
2021-09-25 08:49:18 us=264971 show_ciphers = DISABLED
2021-09-25 08:49:18 us=264997 show_digests = DISABLED
2021-09-25 08:49:18 us=265024 show_engines = DISABLED
2021-09-25 08:49:18 us=265050 genkey = DISABLED
2021-09-25 08:49:18 us=265077 genkey_filename = '[UNDEF]'
2021-09-25 08:49:18 us=265103 key_pass_file = '[UNDEF]'
2021-09-25 08:49:18 us=265130 show_tls_ciphers = DISABLED
2021-09-25 08:49:18 us=265156 connect_retry_max = 0
2021-09-25 08:49:18 us=265183 Connection profiles [0]:
2021-09-25 08:49:18 us=265210 proto = tcp-client
2021-09-25 08:49:18 us=265236 local = '[UNDEF]'
2021-09-25 08:49:18 us=265263 local_port = '[UNDEF]'
2021-09-25 08:49:18 us=265289 remote = '**.**.**.**'
2021-09-25 08:49:18 us=265315 remote_port = '@@@@@'
2021-09-25 08:49:18 us=265341 remote_float = DISABLED
2021-09-25 08:49:18 us=265367 NOTE: --mute triggered...
2021-09-25 08:49:18 us=265406 217 variation(s) on previous 20 message(s) suppressed by --mute
2021-09-25 08:49:18 us=265434 OpenVPN 2.5.0 arm-oe-linux-gnueabi [SSL (OpenSSL)] [LZO] [LZ4] [EPOLL] [MH/PKTINFO] [AEAD] built on Sep 17 2021
2021-09-25 08:49:18 us=265484 library versions: OpenSSL 1.1.1g 21 Apr 2020, LZO 2.10
2021-09-25 08:49:18 us=267156 WARNING: No server certificate verification method has been enabled. See http://openvpn.net/howto.html#mitm for more info.
2021-09-25 08:49:18 us=271991 Control Channel MTU parms [ L:1623 D:1210 EF:40 EB:0 ET:0 EL:3 ]
2021-09-25 08:49:18 us=272174 Data Channel MTU parms [ L:1623 D:1450 EF:123 EB:406 ET:0 EL:3 ]
2021-09-25 08:49:18 us=272323 Local Options String (VER=V4): 'V4,dev-type tun,link-mtu @@@,tun-mtu 1500,proto TCPv4_CLIENT,cipher BF-CBC,auth SHA1,keysize 128,key-method 2,tls-client'
2021-09-25 08:49:18 us=272369 Expected Remote Options String (VER=V4): 'V4,dev-type tun,link-mtu @@@,tun-mtu 1500,proto TCPv4_SERVER,cipher BF-CBC,auth SHA1,keysize 128,key-method 2,tls-server'
2021-09-25 08:49:18 us=272434 TCP/UDP: Preserving recently used remote address: [AF_INET]**.**.**.**:@@@@@
2021-09-25 08:49:18 us=272525 Socket Buffers: R=[131072->131072] S=[16384->16384]
2021-09-25 08:49:18 us=272565 Attempting to establish TCP connection with [AF_INET]**.**.**.**:@@@@@ [nonblock]
2021-09-25 08:49:18 us=330019 TCP connection established with [AF_INET]**.**.**.**:@@@@@
2021-09-25 08:49:18 us=330158 TCP_CLIENT link local: (not bound)
2021-09-25 08:49:18 us=330193 TCP_CLIENT link remote: [AF_INET]**.**.**.**:@@@@@
WR2021-09-25 08:49:18 us=386109 TLS: Initial packet from [AF_INET]**.**.**.**:@@@@@, sid=7377e6f4 37128b95
WWRWR2021-09-25 08:49:18 us=556893 VERIFY OK: depth=1, C=GE, ST=ST, L=STUTTGARD, O=Happy_Meals, CN=Happy_Meals CA, emailAddress=1234@****.com
2021-09-25 08:49:18 us=557432 VERIFY OK: depth=0, C=GE, ST=ST, L=STUTTGARD, O=Happy_Meals, CN=server, emailAddress=m854@myinet.com
RWWWWRRRWW2021-09-25 08:49:18 us=715722 Control Channel: TLSv1.3, cipher TLSv1.3 TLS_AES_256_GCM_SHA384, 1024 bit RSA
2021-09-25 08:49:18 us=715841 [server] Peer Connection Initiated with [AF_INET]**.**.**.**:*****
2021-09-25 08:49:19 us=945229 SENT CONTROL [server]: 'PUSH_REQUEST' (status=1)
WRR2021-09-25 08:49:20 us=55072 PUSH: Received control message: 'PUSH_REPLY,route 10.10.0.0 255.255.255.0,topology net30,ping 10,ping-restart 120,ifconfig 10.10.0.222 10.10.0.221,peer-id 0,cipher AES-256-GCM'
2021-09-25 08:49:20 us=55364 OPTIONS IMPORT: timers and/or timeouts modified
2021-09-25 08:49:20 us=55406 OPTIONS IMPORT: --ifconfig/up options modified
2021-09-25 08:49:20 us=55471 OPTIONS IMPORT: route options modified
2021-09-25 08:49:20 us=55497 OPTIONS IMPORT: peer-id set
2021-09-25 08:49:20 us=55522 OPTIONS IMPORT: adjusting link_mtu to 1626
2021-09-25 08:49:20 us=55548 OPTIONS IMPORT: data channel crypto options modified
2021-09-25 08:49:20 us=55579 Data Channel: using negotiated cipher 'AES-256-GCM'
2021-09-25 08:49:20 us=55635 Data Channel MTU parms [ L:1554 D:1450 EF:54 EB:406 ET:0 EL:3 ]
2021-09-25 08:49:20 us=55932 Outgoing Data Channel: Cipher 'AES-256-GCM' initialized with 256 bit key
2021-09-25 08:49:20 us=55970 Incoming Data Channel: Cipher 'AES-256-GCM' initialized with 256 bit key
2021-09-25 08:49:20 us=56297 ROUTE_GATEWAY 192.168.1.1/255.255.255.0 IFACE=eth0 HWADDR=5c:fa:00:00:15:7e
2021-09-25 08:49:20 us=59014 ERROR: Cannot open TUN/TAP dev /dev/net/tun: No such device (errno=19)
2021-09-25 08:49:20 us=59119 Exiting due to fatal error
Any idea ?
By the way receiver gets the proper date & time .
Edited by dr_virus, 25 September 2021 - 07:18.
Posted 25 September 2021 - 08:22
NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.
Wanna help with OpenPLi Translation? Please read our Wiki Information for translators
Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)
AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
0 members, 16 guests, 0 anonymous users