#1
Geplaatst op 4 augustus 2008 - 14:41
OK heres my predicament i have the DM500-s box as yu know it has limited internal flash so im trying to mount the /var folder on a network mount, everything is setup correctly *Pictures Below*
So next i go into options > swap file and /var > change var location to dm500
When i click green to save it says it will move the file and reboot press green to start as soon as i press the green button i get /media/var could not be written *press the red button to close*
That happens every time i try, Anyone got any ideas that could help me out?
Thanks for reading
Re: Trying To Mount /var On HDD #2
Geplaatst op 4 augustus 2008 - 15:55
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Pro (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: Trying To Mount /var On HDD #3
Re: Trying To Mount /var On HDD #4
Re: Trying To Mount /var On HDD #5
Re: Trying To Mount /var On HDD #6
Re: Trying To Mount /var On HDD #7
Geplaatst op 6 september 2008 - 06:44
1st of all id like to say thank you to the image makers for your time and effort and continued support, Its much appriciated from me and many others.
OK heres my predicament i have the DM500-s box as yu know it has limited internal flash so im trying to mount the /var folder on a network mount, everything is setup correctly *Pictures Below*
So next i go into options > swap file and /var > change var location to dm500
When i click green to save it says it will move the file and reboot press green to start as soon as i press the green button i get /media/var could not be written *press the red button to close*
That happens every time i try, Anyone got any ideas that could help me out?
Thanks for reading
Re: Trying To Mount /var On HDD #8
Re: Trying To Mount /var On HDD #9
Geplaatst op 6 september 2008 - 09:04
That's right. The image creates a folder pli and one with a lot of numbers. I suppose if the root folder (on /media/var) is shared all folders created later on are automatically shared too.I found the problem. DM500 creates a folder in VAR named PLI. It was not checked obviously to be share. I share it and thats all. Is working fine.
Re: Trying To Mount /var On HDD #10
Geplaatst op 7 september 2008 - 07:58
I found the problem. DM500 creates a folder in VAR named PLI. It was not checked obviously to be share. I share it and thats all. Is working fine.
Re: Trying To Mount /var On HDD #11
Geplaatst op 7 september 2008 - 11:42
@Katje2: did you turn off and turn on the computer again? Moving /var to a computer only works if the computer is always on as long as the Dreambox is on (or in standby).
Re: Trying To Mount /var On HDD #12
Geplaatst op 8 september 2008 - 06:15
Its just working the first time. I disconnect the computer and the problem "error binding to socket " continue and the emulator RQCAMD is not executed. Any idea?
I found the problem. DM500 creates a folder in VAR named PLI. It was not checked obviously to be share. I share it and thats all. Is working fine.
Re: Trying To Mount /var On HDD #13
Geplaatst op 8 september 2008 - 06:49
Re: Trying To Mount /var On HDD #14
Re: Trying To Mount /var On HDD #15
Re: Trying To Mount /var On HDD #16
Re: Trying To Mount /var On HDD #17
Geplaatst op 24 september 2008 - 11:13
Everything else seems to work fine, untill I reboot the dreambox. It then says it still has the network hdd mounted as /var, but the only space available is the internal flash?!
Re: Trying To Mount /var On HDD #18
Geplaatst op 24 september 2008 - 11:38
I fixed some issues in the next PLi Jade Final. Can't say it will solve all, but I've seen this problem before.i too have a similar problem... none of my softcams work when i use a network mounted HDD as the /var folder?!
Everything else seems to work fine, untill I reboot the dreambox. It then says it still has the network hdd mounted as /var, but the only space available is the internal flash?!
Also tagged with one or more of these keywords: DM500
Canal digitaal probleem met kaart heractivatieBegonnen door Lutz, 7 jun 2014 dm500, et9000 |
|
|||
HDD problems DM500HD!Begonnen door Elgreco, 4 nov 2013 DM500, HDD |
|
|||
E1 build failsBegonnen door pr.malek, 16 okt 2013 build, enigma1, dm500 |
|
|||
DM500 build CDK libtool errorBegonnen door xalanaseon, 14 mrt 2013 DM500, CDK, LIBTOOL, ACLOCAL.M4 |
|
|||
DM500 is not workingBegonnen door wonder4, 12 mrt 2013 dm500 |
|
1 gebruiker(s) lezen dit onderwerp
0 leden, 1 bezoekers, 0 anonieme gebruikers