Jump to content


Photo

Xsarius Galaxy 4K transcoding en meer issues.


  • Please log in to reply
114 replies to this topic

Re: Xsarius Galaxy 4K transcoding en meer issues. #101 Erik Slagter

  • PLi® Core member
  • 45,353 posts

+498
Excellent

Posted 6 October 2019 - 11:11

We hebben intussen vastgesteld dat streamproxy van de OWIF demuxer20 krijgt toegewezen, maar die bestaat helemaal niet. OWIF krijgt dat weer van enigma door, dus rara, hoe kan dat. Ik hoor dat streaming wel goed werkt en dat gebruikt op dat gebied hetzelfde mechanisme. Lijkt op een bug in enigma die staat stiekem al heel lang in gezeten heeft en nu pas getriggerd wordt, op een ontvanger met veel tuners en weinig demuxers. Helaas is die code niet zo mijn specialiteit.


* Wavefrontier T90 with 28E/23E/19E/13E/9E/4.8E/0.8W/5W via SCR switches 2 x 2 x 6 user bands
* Ziggo digital cable TV (FTA)
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.

Re: Xsarius Galaxy 4K transcoding en meer issues. #102 WanWizard

  • Forum Moderator
    PLi® Core member
  • 48,436 posts

+823
Excellent

Posted 6 October 2019 - 13:15

ik heb nog een ander probleem gevonden met 7.2 rc op een galaxy 4k

als ik ga opnemen

npo 1 12187 H op tuner A

npo 2 11379 V op tuner B

npo 3 12187 V op tuner B

rtl    4 11856 V op tuner C krijg ik afstemmen mislukt

klopt dit of is het de bedoeling dat ik zenders die ik niet kan ontvangen ook niet kan selecteren ?

 

Als je een legacy setup (DiseqC) hebt aangesluiten op de beide inputs van de FBC tuner, dan heb je dezelfde beperkingen als bij reguliere tuners: 1 transponder per kabel.

 

En je zap naar RTL4 wil een derde transponder tunen, en dat kan niet.

 

FBC tuners zijn gemaakt voor een Unicable setup, daarbij heb je dat probleem niet, dan kunnen 8 tuners ook 8 transponders tunen...


Currently in use: VU+Duo 4K (2xFBC S2), Amiko Viper T2C (T2), SAB Alpha Triple HD (S2+T2), Zgemma H3.T2C (T/C), Zgemma H6 (fallback), VU+Zero (fallback)

Many answers to your question can be found in our new and improved wiki.

note: I do not provide support via PM !

 


Re: Xsarius Galaxy 4K transcoding en meer issues. #103 teo1966

  • Senior Member
  • 779 posts

+8
Neutral

Posted 6 October 2019 - 14:16

 

ik heb nog een ander probleem gevonden met 7.2 rc op een galaxy 4k

als ik ga opnemen

npo 1 12187 H op tuner A

npo 2 11379 V op tuner B

npo 3 12187 V op tuner B

rtl    4 11856 V op tuner C krijg ik afstemmen mislukt

klopt dit of is het de bedoeling dat ik zenders die ik niet kan ontvangen ook niet kan selecteren ?

 

Als je een legacy setup (DiseqC) hebt aangesluiten op de beide inputs van de FBC tuner, dan heb je dezelfde beperkingen als bij reguliere tuners: 1 transponder per kabel.

 

En je zap naar RTL4 wil een derde transponder tunen, en dat kan niet.

 

FBC tuners zijn gemaakt voor een Unicable setup, daarbij heb je dat probleem niet, dan kunnen 8 tuners ook 8 transponders tunen...

 

 

heb 4 satellieten met een diseq abcd

ik bedoelde als ik bv met een twintuner waar al 2 opnames draaien dan kan ik niet alle zenders meer selecteren om te kijken

dit gebeurde  niet bij mijn ontvanger kreeg de foutmelding afstemmen mislukt


HD2400/HD11/HD530C/HD51 openpli 6.2


Re: Xsarius Galaxy 4K transcoding en meer issues. #104 WanWizard

  • Forum Moderator
    PLi® Core member
  • 48,436 posts

+823
Excellent

Posted 6 October 2019 - 14:31

Ja, maar je hebt maar 2 kabels, een Galaxy 4K heeft toch maar 2 inputs? Wat er aan die kabels hangt is niet zo relevant.


Currently in use: VU+Duo 4K (2xFBC S2), Amiko Viper T2C (T2), SAB Alpha Triple HD (S2+T2), Zgemma H3.T2C (T/C), Zgemma H6 (fallback), VU+Zero (fallback)

Many answers to your question can be found in our new and improved wiki.

note: I do not provide support via PM !

 


Re: Xsarius Galaxy 4K transcoding en meer issues. #105 Tech

  • Forum Moderator
    PLi® Core member
  • 11,045 posts

+261
Excellent

Posted 6 October 2019 - 14:57

Ja, maar je hebt maar 2 kabels, een Galaxy 4K heeft toch maar 2 inputs? Wat er aan die kabels hangt is niet zo relevant.

Klopt maar wat hij (denk ik) bedoelt is dat als er geen tuners meer beschikbaar zijn, die kanalen 'uitgegrijst' worden, dat gebeurt nu dus niet (meer)


Aan de rand van de afgrond is een stap voorwaarts niet altijd vooruitgang....

Re: Xsarius Galaxy 4K transcoding en meer issues. #106 WanWizard

  • Forum Moderator
    PLi® Core member
  • 48,436 posts

+823
Excellent

Posted 6 October 2019 - 15:00

Correct, dat gebeurt als er geen vrije tuners meer zijn.

 

En die zijn er in dit geval maar zat, alleen krijg je een foutmelding op het moment dat je zo'n tuner aan spreekt, pas op dat moment komt Enigma er achter dat er geen "kabels" meer vrij zijn.


Currently in use: VU+Duo 4K (2xFBC S2), Amiko Viper T2C (T2), SAB Alpha Triple HD (S2+T2), Zgemma H3.T2C (T/C), Zgemma H6 (fallback), VU+Zero (fallback)

Many answers to your question can be found in our new and improved wiki.

note: I do not provide support via PM !

 


Re: Xsarius Galaxy 4K transcoding en meer issues. #107 teo1966

  • Senior Member
  • 779 posts

+8
Neutral

Posted 6 October 2019 - 15:33

 

Ja, maar je hebt maar 2 kabels, een Galaxy 4K heeft toch maar 2 inputs? Wat er aan die kabels hangt is niet zo relevant.

Klopt maar wat hij (denk ik) bedoelt is dat als er geen tuners meer beschikbaar zijn, die kanalen 'uitgegrijst' worden, dat gebeurt nu dus niet (meer)

 

:thumbs-up: :thumbs-up: :thumbs-up:


HD2400/HD11/HD530C/HD51 openpli 6.2


Re: Xsarius Galaxy 4K transcoding en meer issues. #108 teo1966

  • Senior Member
  • 779 posts

+8
Neutral

Posted 13 October 2019 - 11:33

heb een film gestart deze loopt vast op mijn galaxy 4k en werkt wel op mijn hd2400

 

OpenPLi Enigma2 crash log

crashdate=zo okt 13 12:24:06 2019
compiledate=Oct 11 2019
skin=PLi-FullNightHD/skin.xml
sourcedate=2019-10-09
branch=rc
rev=5b763d3
component=enigma2, signal

stbmodel=dm8000
stbmodel=uno4k
stbmodel=dm8000
kernelcmdline=root=/dev/mmcblk0p4 rootwait rw rootwait=data=journal debug,nolock coherent_pool=2M brcm_cma=504M@0x10000000 brcm_cma=260M@0x2f800000 brcm_cma=1020M@0x80000000 hwtypenum=262
nimsockets=NIM Socket 0:
imageissue=openpli 7.2-rc %h


ADD Peer hd2400=hd2400.local:8001
ADD Peer hd11=hd11.local:8001
ADD Peer fusionhdse=fusionhdse.local:8001
ADD Peer hd2400=hd2400.local:8001
ADD Peer hd11=hd11.local:8001
ADD Peer fusionhdse=fusionhdse.local:8001
Backtrace:
Backtrace:
/usr/bin/enigma2(_Z17handleFatalSignaliP9siginfo_tPv) [0x72A44]
/lib/libc.so.6(__default_rt_sa_restorer) [0xB61AE3D0]
/lib/libc.so.6(gsignal) [0xB61AD1CC]
/lib/libc.so.6(abort) [0xB61AE530]
-------FATAL SIGNAL


dmesg

<6>[    0.000000] Booting Linux on physical CPU 0x0
<5>[    0.000000] Linux version 3.14.28 (oe-user@oe-host) (gcc version 6.3.0 (GCC) ) #1 SMP Fri Sep 6 15:34:00 CEST 2019
<6>[    0.000000] CPU: ARMv7 Processor [420f00f3] revision 3 (ARMv7), cr=30c7387d
<6>[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
<6>[    0.000000] Machine model: BCM97252SSAT_V00
<6>[    0.000000] moving dtb from 0x0000000007628000 to 0x0000000000927bb0
<6>[    0.000000] cma: Reserved 504 MiB at 0x0000000010000000
<6>[    0.000000] cma: Reserved 260 MiB at 0x000000002f800000
<6>[    0.000000] cma: Reserved 1020 MiB at 0x0000000080000000
<6>[    0.000000] cma: Reserved 16 MiB at 0x000000000f000000
<6>[    0.000000] Memory policy: Data cache writealloc
<7>[    0.000000] On node 0 totalpages: 524288
<7>[    0.000000] free_area_init_node: node 0, pgdat c08e84c0, node_mem_map cd7f2000
<7>[    0.000000]   Normal zone: 512 pages used for memmap
<7>[    0.000000]   Normal zone: 0 pages reserved
<7>[    0.000000]   Normal zone: 65536 pages, LIFO batch:15
<7>[    0.000000]   HighMem zone: 5632 pages used for memmap
<7>[    0.000000]   HighMem zone: 458752 pages, LIFO batch:31
<6>[    0.000000] MCP: Enabling write pairing
<6>[    0.000000] PERCPU: Embedded 8 pages/cpu @cd7c0000 s9536 r8192 d15040 u32768
<7>[    0.000000] pcpu-alloc: s9536 r8192 d15040 u32768 alloc=8*4096
<7>[    0.000000] pcpu-alloc: [0] 0 [0] 1
<4>[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 523776
<5>[    0.000000] Kernel command line: root=/dev/mmcblk0p4 rootwait rw rootwait=data=journal debug,nolock coherent_pool=2M brcm_cma=504M@0x10000000 brcm_cma=260M@0x2f800000 brcm_cma=1020M@0x80000000 hwtypenum=262
<6>[    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
<6>[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
<4>[    0.000000] Memory: 219508K/2097152K available (6532K kernel code, 342K rwdata, 1996K rodata, 265K init, 200K bss, 34444K reserved, 1843200K cma-reserved, 0K highmem)
<5>[    0.000000] Virtual kernel memory layout:
<5>[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
<5>[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
<5>[    0.000000]     vmalloc : 0xd0800000 - 0xff000000   ( 744 MB)
<5>[    0.000000]     lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
<5>[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
<5>[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
<5>[    0.000000]       .text : 0xc0008000 - 0xc085c5fc   (8530 kB)
<5>[    0.000000]       .init : 0xc085d000 - 0xc089f540   ( 266 kB)
<5>[    0.000000]       .data : 0xc08a0000 - 0xc08f58f0   ( 343 kB)
<5>[    0.000000]        .bss : 0xc08f58f8 - 0xc0927bb0   ( 201 kB)
<6>[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
<6>[    0.000000] Hierarchical RCU implementation.
<6>[    0.000000]     RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
<6>[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
<6>[    0.000000] NR_IRQS:16 nr_irqs:16 16
<6>[    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xfc403000, parent irq: 93)
<6>[    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xfc3e1000, parent irq: 64)
<6>[    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xfc410640, parent irq: 95)
<6>[    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xfc4d1200, parent irq: 58)
<6>[    0.000000] Architected cp15 timer(s) running at 27.00MHz (virt).
<6>[    0.000004] sched_clock: 56 bits at 27MHz, resolution 37ns, wraps every 2545165795328ns
<6>[    0.000009] Switching to timer-based delay loop
<6>[    0.000210] Console: colour dummy device 80x30
<6>[    0.000228] Calibrating delay loop (skipped), value calculated using timer frequency.. 54.00 BogoMIPS (lpj=27000)
<6>[    0.000235] pid_max: default: 32768 minimum: 301
<6>[    0.000327] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
<6>[    0.000333] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
<6>[    0.006044] CPU: Testing write buffer coherency: ok
<6>[    0.006236] CPU0: update cpu_power 1024
<6>[    0.006242] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
<6>[    0.006407] Setting up static identity map for 0x63cb90 - 0x63cbe8
<4>[    0.008588] CPU1: Booted secondary processor
<6>[    0.008607] CPU1: update cpu_power 1024
<6>[    0.008610] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
<6>[    0.008671] Brought up 2 CPUs
<6>[    0.008680] SMP: Total of 2 processors activated.
<6>[    0.008685] CPU: All CPU(s) started in SVC mode.
<6>[    0.009033] devtmpfs: initialized
<6>[    0.012445] VFP support v0.3: implementor 42 architecture 4 part 00 variant 0 rev 0
<6>[    0.040111] regulator-dummy: no parameters
<6>[    0.040351] NET: Registered protocol family 16
<6>[    0.041526] DMA: preallocated 2048 KiB pool for atomic coherent allocations
<6>[    0.042293] cpuidle: using governor ladder
<6>[    0.042299] cpuidle: using governor menu
<4>[    0.044722] irq: no irq domain found for /rdb/interrupt-controller@f040a700 !
<4>[    0.044851] irq: no irq domain found for /rdb/interrupt-controller@f0417380 !
<4>[    0.047950] irq: no irq domain found for /rdb/interrupt-controller@f03e1a00 !
<6>[    0.048191] syscon f0404000.syscon: regmap [mem 0xf0404000-0xf0404523] registered
<6>[    0.048334] syscon f0404100.syscon: regmap [mem 0xf0404100-0xf040415b] registered
<6>[    0.048492] syscon f040415c.syscon: regmap [mem 0xf040415c-0xf040419b] registered
<6>[    0.048632] syscon f0410700.syscon: regmap [mem 0xf0410700-0xf041070b] registered
<6>[    0.048760] syscon f041070c.syscon: regmap [mem 0xf041070c-0xf0410713] registered
<6>[    0.048883] syscon f1101004.syscon: regmap [mem 0xf1101004-0xf1101403] registered
<6>[    0.049005] syscon f1181004.syscon: regmap [mem 0xf1181004-0xf1181403] registered
<6>[    0.049260] syscon f0404080.syscon: regmap [mem 0xf0404080-0xf0404083] registered
<6>[    0.049393] syscon f04040a4.syscon: regmap [mem 0xf04040a4-0xf04040a7] registered
<6>[    0.049508] syscon f03e0154.syscon: regmap [mem 0xf03e0154-0xf03e0157] registered
<6>[    0.049621] syscon f03e0354.syscon: regmap [mem 0xf03e0354-0xf03e0357] registered
<6>[    0.049752] syscon f03e0400.syscon: regmap [mem 0xf03e0400-0xf03e0403] registered
<4>[    0.050265] irq: no irq domain found for /rdb/interrupt-controller@f0417380 !
<6>[    0.050747] syscon f03e2400.syscon: regmap [mem 0xf03e2400-0xf03e27ff] registered
<6>[    0.050894] syscon f0452000.syscon: regmap [mem 0xf0452000-0xf04520ff] registered
<6>[    0.051409] No ATAGs?
<6>[    0.051426] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
<6>[    0.051430] hw-breakpoint: maximum watchpoint size is 8 bytes.
<6>[    0.051595] Broadcom Brahma-B15 readahead cache at: 0xfc3e2478
<6>[    0.065707] bio: create slab <bio-0> at 0
<5>[    0.066297] SCSI subsystem initialized
<7>[    0.066485] libata version 3.00 loaded.
<6>[    0.066836] usbcore: registered new interface driver usbfs
<6>[    0.066905] usbcore: registered new interface driver hub
<6>[    0.066991] usbcore: registered new device driver usb
<6>[    0.067108] Linux video capture interface: v2.00
<6>[    0.067601] pps_core: LinuxPPS API ver. 1 registered
<6>[    0.067605] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
<6>[    0.067652] PTP clock support registered
<6>[    0.068224] Advanced Linux Sound Architecture Driver Initialized.
<6>[    0.068916] cfg80211: Calling CRDA to update world regulatory domain
<6>[    0.069419] brcm-pci f0460000.pcie: adjusting to legacy (broken) pcie DT
<6>[    0.069615] brcm-pci f0490000.pcie: adjusting to legacy (broken) pcie DT
<6>[    0.169914] brcm-pci f0460000.pcie: link down
<6>[    0.269939] brcm-pci f0490000.pcie: link down
<6>[    0.269979] Switched to clocksource arch_sys_counter
<5>[    0.270132] FS-Cache: Loaded
<6>[    0.277763] NET: Registered protocol family 2
<6>[    0.278125] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
<6>[    0.278141] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
<6>[    0.278163] TCP: Hash tables configured (established 2048 bind 2048)
<6>[    0.278209] TCP: reno registered
<6>[    0.278216] UDP hash table entries: 256 (order: 1, 8192 bytes)
<6>[    0.278227] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
<6>[    0.278325] NET: Registered protocol family 1
<6>[    0.278499] RPC: Registered named UNIX socket transport module.
<6>[    0.278505] RPC: Registered udp transport module.
<6>[    0.278508] RPC: Registered tcp transport module.
<6>[    0.278511] RPC: Registered tcp NFSv4.1 backchannel transport module.
<7>[    0.278518] PCI: CLS 0 bytes, default 64
<6>[    0.278762] hw perfevents: enabled with ARMv7 Cortex-A15 PMU driver, 7 counters available
<6>[    0.279886] futex hash table entries: 512 (order: 3, 32768 bytes)
<4>[    0.286167] bounce pool size: 64 pages
<5>[    0.291926] FS-Cache: Netfs 'nfs' registered for caching
<5>[    0.292255] NFS: Registering the id_resolver key type
<5>[    0.292281] Key type id_resolver registered
<5>[    0.292285] Key type id_legacy registered
<6>[    0.292295] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
<6>[    0.292299] Installing knfsd (copyright © 1996 okir@monad.swb.de).
<5>[    0.292529] FS-Cache: Netfs 'cifs' registered for caching
<5>[    0.292747] Key type cifs.spnego registered
<6>[    0.292898] fuse init (API version 7.22)
<6>[    0.293325] SGI XFS with security attributes, realtime, large block/inode numbers, no debug enabled
<6>[    0.294746] msgmni has been set to 460
<6>[    0.295384] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
<6>[    0.295391] io scheduler noop registered
<6>[    0.295404] io scheduler cfq registered (default)
<6>[    0.295640] brcm-gisb-arb f0400000.gisb-arb: registered mem: fc400000, irqs: 258, 259
<6>[    0.362372] brcm-cma brcm-cma.0: Initialized Broadcom CMA root device
<6>[    0.362938] brcm-cma brcm-cma.0: Added CMA device @ PA=0x10000000 LEN=0x1f800000
<6>[    0.373492] brcm-cma brcm-cma.0: Pre-allocated 0x1f800000 bytes @ 0x10000000
<6>[    0.374082] brcm-cma brcm-cma.1: Added CMA device @ PA=0x2f800000 LEN=0x10400000
<6>[    0.379615] brcm-cma brcm-cma.1: Pre-allocated 0x10400000 bytes @ 0x2f800000
<6>[    0.380205] brcm-cma brcm-cma.2: Added CMA device @ PA=0x80000000 LEN=0x3fc00000
<6>[    0.400158] brcm-cma brcm-cma.2: Pre-allocated 0x3fc00000 bytes @ 0x80000000
<6>[    0.400578] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
<6>[    0.402117] f040a900.serial: ttyS0 at MMIO 0xf040a900 (irq = 107, base_baud = 5062500) is a 16550A
<6>[    1.264478] console [ttyS0] enabled
<6>[    1.268368] f040a940.serial: ttyS1 at MMIO 0xf040a940 (irq = 108, base_baud = 5062500) is a 16550A
<6>[    1.277683] f040a980.serial: ttyS2 at MMIO 0xf040a980 (irq = 109, base_baud = 5062500) is a 16550A
<6>[    1.291960] brd: module loaded
<6>[    1.297679] loop: module loaded
<3>[    1.301476] ahci brcmstb-ahci.0: can't get clock
<6>[    1.306194] ahci brcmstb-ahci.0: SSS flag set, parallel bus scan disabled
<6>[    1.323996] ahci brcmstb-ahci.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl platform mode
<6>[    1.332625] ahci brcmstb-ahci.0: flags: 64bit ncq sntf stag pm clo pmp slum part
<6>[    1.342081] scsi0 : ahci_platform
<6>[    1.345713] scsi1 : ahci_platform
<6>[    1.349246] ata1: SATA max UDMA/133 mmio [mem 0xf045a000-0xf045aa9b] port 0x100 irq 91
<6>[    1.357177] ata2: SATA max UDMA/133 mmio [mem 0xf045a000-0xf045aa9b] port 0x180 irq 91
<6>[    1.366354] spi_brcmstb f03e3400.spi: 1-lane output, 3-byte address
<6>[    1.372762] spi_brcmstb f03e3400.spi: master is unqueued, this is deprecated
<4>[    1.380075] m25p80 spi32766.0: found gd25q32, expected m25p80
<6>[    1.385854] m25p80 spi32766.0: gd25q32 (4096 Kbytes)
<5>[    1.390846] 5 ofpart partitions found on MTD device spi32766.0
<5>[    1.396689] Creating 5 MTD partitions on "spi32766.0":
<5>[    1.401836] 0x000000000000-0x000000200000 : "flash0.bolt"
<5>[    1.407912] 0x000000200000-0x000000210000 : "flash0.macadr"
<5>[    1.414119] 0x000000210000-0x000000220000 : "flash0.nvram"
<5>[    1.420206] 0x000000220000-0x000000230000 : "flash0.devtree"
<5>[    1.426436] 0x000000000000-0x000000400000 : "flash0"
<6>[    1.432951] libphy: Fixed MDIO Bus: probed
<6>[    1.437729] bcmgenet f0b00000.ethernet: GENET 4.5 EPHY: 0x1001
<6>[    1.454990] libphy: bcmgenet MII bus: probed
<6>[    1.478994] ata1: SATA link down (SStatus 0 SControl 300)
<6>[    1.485614] e1000e: Intel® PRO/1000 Network Driver - 2.3.2-k
<6>[    1.491465] e1000e: Copyright© 1999 - 2013 Intel Corporation.
<6>[    1.497867] xhci-brcm: xHCI BRCM driver
<6>[    1.501813] xhci-brcm f0471000.xhci_v2: xHCI Host Controller
<6>[    1.507690] xhci-brcm f0471000.xhci_v2: new USB bus registered, assigned bus number 1
<6>[    1.515781] xhci-brcm f0471000.xhci_v2: irq 149, io mem 0xf0471000
<6>[    1.522478] hub 1-0:1.0: USB hub found
<3>[    1.526261] hub 1-0:1.0: config failed, hub doesn't have any ports! (err -19)
<6>[    1.533526] xhci-brcm f0471000.xhci_v2: xHCI Host Controller
<6>[    1.539334] xhci-brcm f0471000.xhci_v2: new USB bus registered, assigned bus number 2
<6>[    1.547589] hub 2-0:1.0: USB hub found
<6>[    1.551363] hub 2-0:1.0: 2 ports detected
<6>[    1.555742] ehci-brcm: EHCI BRCM driver
<6>[    1.559673] ehci-brcm f0470300.ehci_v2: EHCI Host Controller
<6>[    1.565486] ehci-brcm f0470300.ehci_v2: new USB bus registered, assigned bus number 3
<6>[    1.583453] ehci-brcm f0470300.ehci_v2: irq 145, io mem 0xf0470300
<6>[    1.594988] ehci-brcm f0470300.ehci_v2: USB 2.0 started, EHCI 1.00
<6>[    1.601623] hub 3-0:1.0: USB hub found
<6>[    1.605396] hub 3-0:1.0: 1 port detected
<6>[    1.605994] ata2: SATA link down (SStatus 0 SControl 300)
<6>[    1.614930] ehci-brcm f0470500.ehci_v2: EHCI Host Controller
<6>[    1.620752] ehci-brcm f0470500.ehci_v2: new USB bus registered, assigned bus number 4
<6>[    1.638706] ehci-brcm f0470500.ehci_v2: irq 146, io mem 0xf0470500
<6>[    1.649986] ehci-brcm f0470500.ehci_v2: USB 2.0 started, EHCI 1.00
<6>[    1.656627] hub 4-0:1.0: USB hub found
<6>[    1.660403] hub 4-0:1.0: 1 port detected
<6>[    1.664634] ohci-brcm: OHCI BRCM driver
<6>[    1.668552] ohci-brcm f0470400.ohci_v2: BRCM OHCI controller
<6>[    1.674361] ohci-brcm f0470400.ohci_v2: new USB bus registered, assigned bus number 5
<6>[    1.682236] ohci-brcm f0470400.ohci_v2: irq 147, io mem 0xf0470400
<6>[    1.743443] hub 5-0:1.0: USB hub found
<6>[    1.747216] hub 5-0:1.0: 1 port detected
<6>[    1.751331] ohci-brcm f0470600.ohci_v2: BRCM OHCI controller
<6>[    1.757160] ohci-brcm f0470600.ohci_v2: new USB bus registered, assigned bus number 6
<6>[    1.765069] ohci-brcm f0470600.ohci_v2: irq 148, io mem 0xf0470600
<6>[    1.826399] hub 6-0:1.0: USB hub found
<6>[    1.830169] hub 6-0:1.0: 1 port detected
<6>[    1.834394] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<6>[    1.840940] ehci-pci: EHCI PCI platform driver
<6>[    1.845471] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
<6>[    1.851683] ohci-pci: OHCI PCI platform driver
<6>[    1.856421] usbcore: registered new interface driver usb-storage
<6>[    1.862584] mousedev: PS/2 mouse device common for all mice
<6>[    1.868521] i2c /dev entries driver
<6>[    1.872337] IR NEC protocol handler initialized
<6>[    1.876879] IR RC5(x) protocol handler initialized
<6>[    1.881677] IR RC6 protocol handler initialized
<6>[    1.886214] IR JVC protocol handler initialized
<6>[    1.890751] IR Sony protocol handler initialized
<6>[    1.895394] IR RC5 (streamzap) protocol handler initialized
<6>[    1.900978] IR SANYO protocol handler initialized
<6>[    1.905690] IR MCE Keyboard/mouse protocol handler initialized
<4>[    1.911711] cpufreq_cpu0: failed to get cpu0 regulator: -19
<6>[    1.917537] sdhci: Secure Digital Host Controller Interface driver
<6>[    1.923728] sdhci: Copyright© Pierre Ossman
<6>[    1.928091] sdhci-pltfm: SDHCI platform and OF driver helper
<6>[    1.934891] mmc0: no vqmmc regulator found
<6>[    1.938999] mmc0: no vmmc regulator found
<6>[    1.973987] mmc0: SDHCI controller on f03e0000.sdhci [f03e0000.sdhci] using ADMA
<6>[    1.982458] mmc1: no vqmmc regulator found
<6>[    1.986564] mmc1: no vmmc regulator found
<6>[    2.021987] mmc1: SDHCI controller on f03e0200.sdhci [f03e0200.sdhci] using ADMA
<6>[    2.029635] hidraw: raw HID events driver © Jiri Kosina
<6>[    2.035384] usbcore: registered new interface driver usbhid
<6>[    2.040967] usbhid: USB HID core driver
<6>[    2.049088] TCP: cubic registered
<6>[    2.055935] NET: Registered protocol family 10
<6>[    2.060862] NET: Registered protocol family 17
<5>[    2.065575] Key type dns_resolver registered
<5>[    2.069958] Registering SWP/SWPB emulation handler
<6>[    2.075140] regulator-dummy: disabling
<6>[    2.083164] ALSA device list:
<6>[    2.086148]   No soundcards found.
<6>[    2.089858] Waiting for root device /dev/mmcblk0p4...
<6>[    2.097655] mmc1: BKOPS_EN bit is not set
<6>[    2.107888] mmc1: new high speed MMC card at address 0001
<6>[    2.113615] mmcblk0: mmc1:0001 4FPD3R 3.64 GiB
<6>[    2.118253] mmcblk0boot0: mmc1:0001 4FPD3R partition 1 4.00 MiB
<6>[    2.124264] mmcblk0boot1: mmc1:0001 4FPD3R partition 2 4.00 MiB
<6>[    2.130276] mmcblk0rpmb: mmc1:0001 4FPD3R partition 3 512 KiB
<6>[    2.139312]  mmcblk0: p1 p2 p3 p4
<6>[    2.145469]  mmcblk0boot1: unknown partition table
<6>[    2.151135]  mmcblk0boot0: unknown partition table
<4>[    2.200311] EXT4-fs (mmcblk0p4): warning: maximal mount count reached, running e2fsck is recommended
<6>[    2.210459] EXT4-fs (mmcblk0p4): mounted filesystem with ordered data mode. Opts: (null)
<6>[    2.218582] VFS: Mounted root (ext4 filesystem) on device 179:4.
<6>[    2.228771] devtmpfs: mounted
<6>[    2.231860] Freeing unused kernel memory: 264K (c085d000 - c089f000)
<4>[    2.776589] Platform init...
<4>[    3.605281] Platform init... ok.
<4>[    3.637985] [Front Version = 40]
<4>[    3.641231] >> No hwtype = 6
<6>[    3.667699] input: GALAXY 4K remote control (native) as /devices/virtual/input/input0
<4>[    3.685634] GALAXY 4K Linux DVB BCM73xx CI Driver Release Time (02/05/19)
<5>[    3.699874] random: nonblocking pool is initialized
<4>[    4.369160] BKNI_P_GetTrackAllocEntry_resize: resizing from 5376->8704
<4>[    4.375806]
<4>[    4.378394] BKNI_Malloc(linuxkernel) top users:
<4>[    4.378394]     blocks,   bytes, filename:line
<4>[    4.387375]
<4>[    4.389013]        966,  205800, ../BSEAV/lib/utils/balloc.c:31
<4>[    4.394951]
<4>[    5.104868] scanning fe...sp4580 dual cable.
<6>[    5.149511] DVB: registering new adapter (bcmdvb-0)
<6>[   11.642240] (NULL device *): DVB: registering adapter 0 frontend 0 (BCM7252S DVB-S2)...
<6>[   11.650325] tunercnt 0 name bcmdvb-0 adapter0
<6>[   11.663214] DVB: registering new adapter (bcmdvb-1)
<6>[   11.798353] (NULL device *): DVB: registering adapter 1 frontend 1 (BCM7252S DVB-S2)...
<6>[   11.806382] tunercnt 1 name bcmdvb-1 adapter1
<6>[   11.811343] DVB: registering new adapter (bcmdvb-2)
<6>[   11.917598] (NULL device *): DVB: registering adapter 2 frontend 2 (BCM7252S DVB-S2)...
<6>[   11.925749] tunercnt 2 name bcmdvb-2 adapter2
<6>[   11.930443] DVB: registering new adapter (bcmdvb-3)
<6>[   12.031387] (NULL device *): DVB: registering adapter 3 frontend 3 (BCM7252S DVB-S2)...
<6>[   12.039475] tunercnt 3 name bcmdvb-3 adapter3
<6>[   12.044249] DVB: registering new adapter (bcmdvb-4)
<6>[   12.145225] (NULL device *): DVB: registering adapter 4 frontend 4 (BCM7252S DVB-S2)...
<6>[   12.153302] tunercnt 4 name bcmdvb-4 adapter4
<6>[   12.158053] DVB: registering new adapter (bcmdvb-5)
<6>[   12.258992] (NULL device *): DVB: registering adapter 5 frontend 5 (BCM7252S DVB-S2)...
<6>[   12.267068] tunercnt 5 name bcmdvb-5 adapter5
<6>[   12.271794] DVB: registering new adapter (bcmdvb-6)
<6>[   12.372585] (NULL device *): DVB: registering adapter 6 frontend 6 (BCM7252S DVB-S2)...
<6>[   12.380692] tunercnt 6 name bcmdvb-6 adapter6
<6>[   12.385495] DVB: registering new adapter (bcmdvb-7)
<6>[   12.486804] (NULL device *): DVB: registering adapter 7 frontend 7 (BCM7252S DVB-S2)...
<6>[   12.494878] tunercnt 7 name bcmdvb-7 adapter7
<6>[   12.499581] DVB: registering new adapter (bcmdvb-8)
<6>[   12.509540] (NULL device *): DVB: registering adapter 8 frontend 8 (SP4580 DVB-C)...
<6>[   12.518001] tunercnt 8 name bcmdvb-8 adapter8
<6>[   12.537010] DVB: registering new adapter (bcmdvb-9)
<6>[   12.546973] (NULL device *): DVB: registering adapter 9 frontend 9 (SP4580 DVB-C)...
<6>[   12.556349] tunercnt 9 name bcmdvb-9 adapter9
<6>[   12.563108] DVB: registering new adapter (bcmdvb-10)
<6>[   12.575807] DVB: registering new adapter (bcmdvb-11)
<6>[   12.593135] >>>vtuner0: register
<6>[   12.600189] DVB: registering new adapter (bcmdvb-12)
<6>[   12.616111] DVB: registering new adapter (bcmdvb-13)
<6>[   12.626240] DVB: registering new adapter (bcmdvb-14)
<4>[   12.640730] Registering device 'sci', major '238'
<4>[   12.648562] Version of smartcard driver: [1.0.0]
<4>[   12.815791] @@^!^@@
<6>[   12.886032] EXT4-fs (mmcblk0p4): re-mounted. Opts: data=ordered
<6>[   14.000988] f0b00000.etherne:01: Broadcom BCM7439 (2) PHY revision: 0x10, patch: 1
<6>[   14.012126] f0b00000.ethernet: configuring instance for internal PHY
<6>[   14.018602] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>[   16.014077] libphy: f0b00000.etherne:01 - Link is Down
<6>[   17.286620] libphy: f0b00000.etherne:01 - Link is Up - 1000/Full
<6>[   17.293088] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<4>[   21.759329] no vt opened...
<4>[   21.762236] set source 0 bf85103c 0.
<4>[   25.024137] - HD_VideoClip out -
<4>[   72.084007] - HD_VideoClip out -
<4>[   75.476871] no vt opened...
<4>[   75.479784] set source 0 bf85103c 0.
<4>[   78.764093] - HD_VideoClip out -
<4>[   89.764015] - HD_VideoClip out -
<4>[   93.209881] no vt opened...
<4>[   93.212702] set source 0 bf85103c 0.
<4>[   96.284091] - HD_VideoClip out -


HD2400/HD11/HD530C/HD51 openpli 6.2


Re: Xsarius Galaxy 4K transcoding en meer issues. #109 WanWizard

  • Forum Moderator
    PLi® Core member
  • 48,436 posts

+823
Excellent

Posted 13 October 2019 - 13:15

Crash in het C deel van Enigma:

/usr/bin/enigma2(_Z17handleFatalSignaliP9siginfo_tPv) [0x72A44]
/lib/libc.so.6(__default_rt_sa_restorer) [0xB61AE3D0]
/lib/libc.so.6(gsignal) [0xB61AD1CC]
/lib/libc.so.6(abort) [0xB61AE530]
-------FATAL SIGNAL

met helaas geen enkele info over het hoe en waar, dit is alleen de backtrace van de abort zelf.

 

We hebben deze vaker gezien, maar geen idee waar deze vandaan komt. Is het met die opname reproduceerbaar?


Currently in use: VU+Duo 4K (2xFBC S2), Amiko Viper T2C (T2), SAB Alpha Triple HD (S2+T2), Zgemma H3.T2C (T/C), Zgemma H6 (fallback), VU+Zero (fallback)

Many answers to your question can be found in our new and improved wiki.

note: I do not provide support via PM !

 


Re: Xsarius Galaxy 4K transcoding en meer issues. #110 teo1966

  • Senior Member
  • 779 posts

+8
Neutral

Posted 14 October 2019 - 19:32

heb mijn ds1512 de smb eens in gesteld met deze opties https://forums.openp...-in-72rc/page-4

het mount probleem blijft en na een herstart van E2 is het probleem weg


HD2400/HD11/HD530C/HD51 openpli 6.2


Re: Xsarius Galaxy 4K transcoding en meer issues. #111 teo1966

  • Senior Member
  • 779 posts

+8
Neutral

Posted 15 October 2019 - 16:39

Crash in het C deel van Enigma:

/usr/bin/enigma2(_Z17handleFatalSignaliP9siginfo_tPv) [0x72A44]
/lib/libc.so.6(__default_rt_sa_restorer) [0xB61AE3D0]
/lib/libc.so.6(gsignal) [0xB61AD1CC]
/lib/libc.so.6(abort) [0xB61AE530]
-------FATAL SIGNAL

met helaas geen enkele info over het hoe en waar, dit is alleen de backtrace van de abort zelf.

 

We hebben deze vaker gezien, maar geen idee waar deze vandaan komt. Is het met die opname reproduceerbaar?

jazeker maar het is een mkv met 7.1 geluid en deze werkt wel op mijn hd2400

Attached Files


HD2400/HD11/HD530C/HD51 openpli 6.2


Re: Xsarius Galaxy 4K transcoding en meer issues. #112 WanWizard

  • Forum Moderator
    PLi® Core member
  • 48,436 posts

+823
Excellent

Posted 15 October 2019 - 17:18

En wat wil je daar mee zeggen? Dat het elders wel werkt, daar kunnen we vrij weinig mee, het zal vast een interactie zijn tussen gstreamer, enigma en de drivers.

 

De meeste handel die je download zijn dusdanig belaberd geencodeerd, dat er duizend en een redenen zijn waarom het om valt. Een fout ergens waar de driver niet tegen kan, en boem.


Currently in use: VU+Duo 4K (2xFBC S2), Amiko Viper T2C (T2), SAB Alpha Triple HD (S2+T2), Zgemma H3.T2C (T/C), Zgemma H6 (fallback), VU+Zero (fallback)

Many answers to your question can be found in our new and improved wiki.

note: I do not provide support via PM !

 


Re: Xsarius Galaxy 4K transcoding en meer issues. #113 teo1966

  • Senior Member
  • 779 posts

+8
Neutral

Posted 15 October 2019 - 18:24

ik wil er mee zeggen dat deze mkv op een andere box wel werkt om uit te sluiten dat deze op een andere box niet werkt

( om proberen te helpen )


HD2400/HD11/HD530C/HD51 openpli 6.2


Re: Xsarius Galaxy 4K transcoding en meer issues. #114 WanWizard

  • Forum Moderator
    PLi® Core member
  • 48,436 posts

+823
Excellent

Posted 15 October 2019 - 18:25

Helaas worden we daar niet veel wijzer van.


Currently in use: VU+Duo 4K (2xFBC S2), Amiko Viper T2C (T2), SAB Alpha Triple HD (S2+T2), Zgemma H3.T2C (T/C), Zgemma H6 (fallback), VU+Zero (fallback)

Many answers to your question can be found in our new and improved wiki.

note: I do not provide support via PM !

 


Re: Xsarius Galaxy 4K transcoding en meer issues. #115 littlesat

  • PLi® Core member
  • 49,205 posts

+527
Excellent

Posted 15 October 2019 - 18:46

Ziet er meer naar uit dat de drivers niet helpen als hij wel draaid op een andere box

WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W





2 user(s) are reading this topic

0 members, 2 guests, 0 anonymous users